アイ・ティー・エス・ジャパン List of Products and Services

The "MV 3000 Basic" is a Mooney viscometer for testing rubber compounds. It conducts vulcanization tests of rubber at fixed temperatures and speeds based on the viscosity of polymers and ISO 289:2005/ASTM D 1646/DIN 53525, Parts 1–4. The device is designed for direct control via a PC, with test control, data collection, and analysis performed using the included "MonControl." The rotation is precisely controlled at 2 revolutions per minute by a gear-driven motor, and the protection circuits for motor overloads and other issues are well-equipped. 【Features】 ■ Capable of evaluating quality control data, vulcanization status, and vulcanization characteristics in a single test ■ Improvement of defective products and yield ■ Increased efficiency of processing processes ■ Shortening and simplifying the development cycle ■ No prior sample processing required *For more details, please refer to the PDF materials or feel free to contact us.

The "V-MV 3000" is a Mooney viscometer that tests rubber compounds at rotor speeds ranging from 0 to 50 rpm. The device is designed for direct control via a PC, with test control, data collection, and analysis conducted using the included "MonControl" software. The device comes with two calibration weights, allowing for complete device calibration through the "MonControl" software. 【Features】 ■ Improvement of defective products and yield ■ Increased efficiency of processing processes ■ Shortening and simplifying the development cycle ■ Analysis software: intuitive and simple operability ■ No prior sample processing required *For more details, please refer to the PDF materials or feel free to contact us.

The "D-RPA 3000" is a dynamic rubber process analysis device that measures the viscoelasticity of elastomers and rubber compounds before, during, and after vulcanization. It comes standard with a cooling mechanism that uses a two-channel compressed air system, allowing independent cooling of the upper and lower dies. This enables rapid control of the sample temperature, and users can select between regular air or pre-cooled compressed air. 【Features】 ■ Minus 40°C liquid cooling chiller (optional) ■ In-house developed closed-loop digital drive ■ Cavity pressure control system ■ Shortening and simplifying the development cycle ■ Reducing lead time for batch release *For more details, please refer to the PDF materials or feel free to contact us.

The "D-MDR 3000" is a dynamic rubber process analysis device designed to measure the viscoelasticity of elastomers and rubber compounds before, during, and after vulcanization. It features air cooling, adjustable oscillation angles, and can measure frequencies from 0.001 Hz to 100 Hz. Designed to test a full range of rheometer parameters in a single unit, it also evaluates the fundamental properties and final properties of polymers or raw materials and vulcanized compounds. 【Features】 ■ Reduction of measurement costs ■ Improvement of defective products and yield ■ Increased efficiency of processing processes ■ Shortening and simplifying the development cycle ■ No need for pre-sample processing *For more details, please refer to the PDF document or feel free to contact us.

The "MDR 3000 Professional" is a rotorless rheometer that tests rubber compounds with an oscillation amplitude of up to 20° and an oscillation frequency ranging from 0.001Hz to 33Hz. It is designed to measure the viscoelasticity of elastomers and rubber compounds before, during, and after curing. It can test a full range of rheometer parameters in a single unit. By combining it with the analysis software "MonControl," users can flexibly configure programs and arbitrary test sequences tailored to their specifications. 【Features】 ■ Shortened lead times for batch release ■ Ability to evaluate quality control data, curing state, curing characteristics, etc., in a single test ■ Improvement of defective products and yield ■ Enhanced efficiency of processing processes ■ Analysis software: Intuitive and simple operation, requiring no prior experience *For more details, please refer to the PDF document or feel free to contact us.

The "MDR 3000" is a rotorless rheometer that tests rubber compounds with oscillation amplitudes ranging from 0.01° to 5°. Based on the measurement results, it is possible to obtain accurate information on "processability," "vulcanization characteristics," "vulcanization speed," and "properties of the compound after vulcanization." By combining it with the analysis software "MonControl," users can flexibly configure programs and arbitrary test sequences tailored to their specifications, allowing for the programming of individual characteristics such as "isothermal tests" and "non-isothermal tests," as well as combination characteristics. 【Features】 ■ Reduction of measurement costs ■ Shortening of batch release times ■ Evaluation of quality control data, vulcanization status, vulcanization characteristics, etc., in a single test ■ Improvement of defective products and yield ■ Shortening and simplification of the development cycle *For more details, please refer to the PDF document or feel free to contact us.

The "MDR 3000 Basic" is a rotor-less rheometer that tests rubber compounds with oscillation amplitudes of 0.2°, 0.5°, 1°, and 3°. By combining it with the analysis software "MonControl," users can flexibly configure programs and arbitrary test sequences tailored to their specifications, allowing for the programming of individual properties such as "tensile" and combination properties. It comes standard with a cooling mechanism that uses a two-channel compressed air system, independently cooling the upper and lower dies. 【Features】 ■ Reduction of measurement costs ■ Shortening of batch release times ■ Improvement of processing efficiency ■ Shortening and simplification of development cycles ■ Analysis software: Intuitive and simple operation, requiring no prior experience *For more details, please refer to the PDF document or feel free to contact us.

The "Iplexer Series" is a double-drive DMA viscoelastic device that requires ideal viscoelastic data. It provides dynamic displacement from ±0.01μm to ±6.000mm and dynamic load from ±0.01N to ±500N (with higher models up to ±4000N), and can further provide static displacement up to 60mm and static load up to 1500N through individual motors. With sufficient displacement and load performance, it reproduces the actual loads that products experience, accommodating various materials including rubber, resin, carbon, film, metal, ceramic, and glass. 【Product Lineup】 ■ 1500℃ Temperature Control HT Series ■ Standard Type 25N–500N Series ■ High Load Type 2000N–6000N Series ■ Flexometer GABOMETER 2000N/4000N *For more details, please refer to the PDF document or feel free to contact us.

The "IPLEXER HT Series" is a newly developed dynamic viscoelastic measurement device that refreshes the high-temperature chamber, which was previously positioned as an optional feature, enabling high-temperature measurements of up to 1500°C. It is equipped with the same double drive as the standard EPLEXOR series. With the upgraded digital load and displacement sensors, it achieves a wide range of measurements from small deformations and small loads to large deformations, as well as high-temperature measurements up to 1500°C. 【Features】 ■ Newly developed 1500°C temperature chamber (also available in a maximum 1000°C specification) ■ Gas purge system to prevent thermal oxidation degradation ■ Compatibility with a wide range of measurements through load sensor replacement ■ High load measurement of ±500N with a double drive system ■ High-precision detection of small loads with digital load sensors *For more details, please refer to the PDF document or feel free to contact us.