シロ産業 List of Products and Services

This is a standard digital tension meter that supports a maximum load of 60 daN, featuring general-purpose/high precision/statistical value display/high-speed internal sampling/wire diameter correction function*/multi-function/mid-low load. It allows for easy measurement of the tension during the feeding and winding of samples such as fibers and wires by clamping them with a lever. It is capable of saving and selecting calibration data for different wire diameters, enabling accurate measurement of multiple samples. You can choose from a variety of types depending on the sample. Some functions may not apply to certain models.

Active in various scenes ● Measurement of density for crude oil, fuel oil, lubricating oil, etc. ● Measurement of density and Brix for various beverages such as milk, soft drinks, and fruit drinks ● Measurement of alcohol content and extract concentration for beer, whiskey, wine, shochu, and sake ● Measurement of Brix and ingredient concentration for quality control of food materials ● Measurement of density and specific gravity for fats and oils such as vegetable oils and animal fats ● Concentration management of etching solutions and acid cleaning solutions for electronic components ● Concentration management of flux and plating solutions

Compression-type digital load cell for force measurement (the load cell body has a sealed structure and is made of all stainless steel) Calibrated, so no amplifier or indicator is needed: Directly connect to a computer. Easy measurement by connecting via USB: Use the measurement software "Win-CT-DLC." Ideal for simple measurements in experiments and evaluations.

The belt tension meter captures sound waves generated by the belt's amplitude with a microphone, converting the frequency into belt tension and displaying it digitally. ■ Features - Bright and easy-to-read OLED screen - Capable of registering 40 measurement conditions - Wide frequency range measurement from 10 to 5000 Hz - Pre-installed unit masses for manufacturer timing belts ■ Adoption of OLED screen The characters are bright and easy to read, improving visibility in dark measurement environments. ■ Capability to register 40 measurement conditions You can register 40 conditions for unit mass, belt width, and span length. (NO,00 to NO,39) ■ Wide measurement range The measurement frequency range has expanded to 10 to 5000 Hz, making it easier to measure in both short span and long span layouts. ■ Pre-installed unit mass Unit masses for all 18 types of timing belts manufactured by the company are pre-installed, making input easy.

The main unit is smaller than postcard size. It uses two AA batteries. Achieves continuous operation for over 50 hours. Equipped with an automatic power-off function.

Food, pharmaceuticals, molds, precision machining... Active in managing magnetic flux density of de-iron magnets and measuring residual magnetism of workpieces! For HACCP and ISO compliance! We also provide free software that allows for recording magnetic measurement values. Suitable for inspection and verification of de-iron magnet rods in food processing, as well as measuring residual magnetism in electronic components, accommodating various inspection and measurement scenarios!

It captures the peaks of instantaneous waveforms. It is a compact and easy-to-operate shock and vibration accelerometer. With the peak hold function, shock acceleration can be easily measured. It is suitable for measuring relatively large accelerations to measure shock acceleration.

Ideal for postcards, envelopes, labels, and small boxes. It adjusts automatically regardless of thickness changes and counts items of varying thickness simultaneously. Since it is non-contact, there is no worry about dirt or scratches.

Can measure five environments. Multifunctional measuring device (5 functions in 1 unit) Equipped with various measuring sensors ● This is a multifunctional measuring device that can measure everything from noise and wind speed to illuminance, temperature, and humidity, all in one unit. ● It features easy operation and a digital display that makes measurement results easy to read.

Suitable for all kinds of fruit. Hardness measurement.

You can measure the heat index (WBGT) and take measures against heatstroke.

Automatically analyzes the master (reference) parts in real-time. There is no need for tedious variety parameter settings.

It is built for accurate timekeeping in hazardous areas. It is an intrinsically safe wall clock, powered by quartz precision movement and operated by an LR14 battery. The integrated bracket allows for easy mounting of the clock on the wall. Adjustments can be made easily and quickly as needed, such as switching from summer to winter time. Note: Battery replacement should only be done outside of hazardous areas.

Lightweight, compact, waterproof cable wire rope tension measuring device, wireless, 10 tons ● Variations from 10t to 150t ● Compatible with wire diameters from φ 4mm to φ 89mm ● 2.4GHz wireless technology (IEEE802.15.4) ● Accuracy of ± 2% of full scale ● Capable of measuring wire rope tension ● High-quality stainless steel construction suitable for marine use ● Dustproof and waterproof rating IP67 (NEMA6) ● Transmission range up to 700m ● Accurately measures tension with five wheels ● Available in two types: "wired" and "wireless" * Optional "line-out function" to measure the distance the wire rope is pulled can be set, usable as a wired device as well.

High-precision measurement using a piezoresistive sensor with built-in correction temperature sensor. Measurement of atmospheric pressure, temperature, and humidity is possible with an optional temperature and humidity probe. RS485 output is standard on all models, with voltage/current analog output available as an option. Long-distance data transmission and networking are possible with digital output.

● Obtained measurement certification in China ● High performance-to-price ratio among similar products ● Options for both Chinese and English languages ● High precision and stable performance ● PC software for data and statistical management ● Suitable for internal and external color evaluation and data management in companies ● Energy-saving design, USB and Bluetooth (optional) data connection ● Measurement of yellowness and whiteness ● Multi-point measurement for averaging ● Large-capacity data storage space

Can be used in hazardous locations (Zone 1) such as oil, gas, and chemical plants. It is easy to install and operate, making it easy to introduce, and it can handle detailed data efficiently, which is highly regarded for its adaptability in daily "predictive and preventive maintenance" operations.

●You can input measurement data into Excel, Notepad, etc., just by connecting to a PC. ●The combination of simple operability (HID) and optional software for Excel input enables a step-up in operational efficiency. ●You can input measurement data into Excel, Notepad, etc., just by connecting to a PC.

Simple analysis by just placing the sample in a dedicated reaction reagent kit ● Compact and lightweight ● Battery-operated (with remaining charge display) ● Portable and easy to operate ● Printer connection available ● Low price ● Comes with an easy analysis manual

● Continuous measurement of air quality changes in the atmosphere, equipped with an alarm function ● Accurate, maintenance-free detection of PM2.5, PM1.0, and PM10 ● Smart, compact, low power consumption, multi-purpose ● Data utilization on the cloud possible in combination with Delta Ohm loggers ● Configurable measurement intervals extend sensor lifespan ● High cost performance and reliability

Just get on and touch. While maintaining a simple measurement method, functions have been added to output OK/NG judgment results externally to link with equipment, and to save personal data and measurement data to a Windows PC via dedicated software. - External output function - Personal data management function ■ External output function The OK/NG judgment external output function is effective for improving product quality and safety, such as unlocking the air shower room or activating the buzzer in explosion-proof facilities.

Ultrasonic belt tension meter

This is a brush that removes static electricity and foreign substances (dust) simultaneously just by brushing. It has a compact, lightweight, and easy-to-use design. It removes static electricity, pollen, dust, PM2.5, and pet hair at the same time, capturing over 99% of pollen and fine particles.

Liquid level gauge that serves as a checker to confirm whether the liquid inside a JIS standard 200L drum is full. 《Sensor-type Full Liquid Level Gauge for 200L Drum》 M58LF-200A (for low viscosity oil, kerosene, light oil, water, wastewater, and waste liquid) *Not suitable for solvents or chemicals that can damage the material.

■Power Button Lamp Auto Correction ON/OFF, Receiver (Normal), High Brightness Mode. Each mode can be confirmed by the color of the power button lamp.

This is a dedicated measuring device for alcohol measurement (measured at 20°C). It allows for sampling of the sample after pre-treatment and can measure with a single touch. The operation is very simple, enabling anyone to perform high-precision alcohol measurements.

- The V surface forms a 90° angle. - It can be used for precision scribing, measuring jigs, etc. - Type A can be measured with three V surfaces: large, medium, and small. - Type B has greater height and thickness compared to the same size of Type A. - It comes in a set of two. - Material: Cast iron Bottom surface to V surface parallelism: 10 μm Parallelism and perpendicularity of each surface: ±30 μm

- The V surface forms a 90° angle. - It can be used for precision scribing or measuring jigs, etc. - After complete heat treatment, it is finished with precision grinding. - It comes in a set of 2 pieces. - Material: special tool steel - Hardness: HS60° or higher Bottom surface to V surface parallelism: 5 μm Parallelism and perpendicularity of each surface: ±20 μm

To understand the risks of heatstroke, use the global shape Ishikawa black globe (diameter 75mm) for safety management in the work environment. Measurement data is recorded in the built-in memory and saved as a CSV file. When the recording interval is set to 1 minute, it is possible to record and save measurement data for approximately 8 consecutive days.

It offers stable measurements, reproducibility, and excellent accuracy. The non-destructive concrete testing machine MI1CON-4289M emits ultrasonic waves ranging from 20kHz to 1,000kHz to inspect the density, elasticity, homogeneity, presence of voids or cavities, chemical damage, and carbonation due to aging in materials such as concrete, stone, and wood. It is particularly widely applied in concrete strength testing and curing measurement. By using high voltages of 1,200V or 600V in the analog circuit while minimizing noise, it demonstrates outstanding performance in stable measurements, reproducibility, and accuracy across a range of materials from thin stone and metal to thick concrete.

● 7-inch colorful touch screen ● Tungsten lamp light source meets USEPA 180.1 requirements. ● 1-8 point calibration with formaldehyde standard solution or zero point water. ● Automatic adjustment from 0 to 4000 NTU. ● 1000 sets of data storage capacity (GLP compliant). ● Stored data can be transferred via USB or RS-232 communication interface. ● The reset function automatically restores all settings to factory defaults.

It transforms into a high-performance ultrasonic thickness gauge connected to a mobile app.

● Measures magnetic flux density in combination with a Hall sensor. ● Compact, lightweight, and color display. ● Wide range: 0.01mT to 1.999T. ● Uses AA rechargeable batteries: continuous use for 6 hours. ● Built-in peak hold function. ● Auto power off. ● Comes with horizontal or vertical probe. ● Automatic calibration when changing probes.

The circuit board and wiring, which include the sensor IC, are seamlessly molded and guarded with materials that excel in environmental performance, preventing the intrusion of water and foreign substances into the sensor tip, as well as failures and degradation caused by accidental short circuits with surrounding metals. They are also resistant to environmental changes and impacts from drops, making them very easy to handle both indoors and outdoors.

I want to manage the remaining amount in a drum without touching the liquid... At such times, a battery-operated type that can be used immediately without the need for construction or connections. Just attach it to the drum. Easy operation with one touch.

Microprocessor technology has completed a compact, lightweight, and high-precision crack depth measurement tool. It is ideal for measuring the depth of fatigue cracks, as well as for depth measurements after magnetic and ultrasonic testing, and for measuring crack depths in rolls and molds. ■ Features ● Applicable to both magnetic and non-magnetic materials ● Easy measurement: Simply place the probe needle on the crack for digital direct reading ● Digital, pocket-sized, high precision ● Robust shock-resistant design, drip-proof structure ● Built-in data logger (up to 3850 points) with 300 types of batch processing available; PC data processing software with RS232C output also available (optional) ● The probe pin is detachable and replaceable

Ideal for locations where lift vehicles cannot be delivered Carbon telescopic pole High-altitude photography type Cannot be used near high-voltage lines or overhead wires. (Risk of electric shock) ■ Pipe disconnection prevention and free rotation measures The maximum extension limit of the pole is indicated by a red line, and a mechanism that makes it difficult for the pole to disconnect is adopted. Free rotation of the pole does not occur. ■ Easy equipment installation The use of an attachment system allows for quick attachment and detachment of the tripod head, making equipment installation easy. ■ Safety-focused lever lock The lock is a lever type that can be visually confirmed. Prevents accidents caused by forgetting to lock the pole at the work site. ■ Condensed technology cultivated through experience The technology cultivated through years of experience in manufacturing camera and video tripods is condensed into this telescopic pole. The carefully selected materials and reliable locking lever system ensure quality that is not embarrassing for a domestic manufacturer. ■ Carefully selected materials The pipes used in the pole are made of highly versatile aluminum and high-quality carbon. The locking mechanism during extension uses a manufacturer-original robust aluminum housing and a lightweight resin housing.

Develop a new color measurement method that allows you to check the test area with a built-in camera, perform fluorescence color measurement with a UV light source, connect to a mobile phone app, and have unlimited storage memory and built-in color cards to find similar colors anytime and anywhere. Additionally, the app can be used for color matching and color correction.

● High-precision induction pickup ● Easy-to-use operation manual and large LCD display with backlight for displaying the position of the pickup stylus, with data transferable to a PC via RS232 for more detailed analysis management using advanced PC software TIMESurf. ● Can be connected to a printer to print data and graphs on the spot. ● Capable of saving and checking data and graphs for up to 15 groups. ● Digital filters: RC, PC-RC, Gaussian, D-P ● Optional delicate accessories such as measurement tables and steel supports for more accurate results and easier operation. ● Complies with ISO standards and is compatible with DIN, ANSI, and JIS standards. ● High-quality lithium-ion rechargeable battery.

Simple measurement of straight lines, height, and slope. The "M138TRP-360H" has improved measurement accuracy by 50%, slope accuracy by 60%, and the maximum measurable distance to 2500 meters compared to conventional models. With a truly simple button operation, it allows for instant measurement of 11 types, including distance, height, angle, and direction. All measurement values are displayed in the line of sight of the target (super high-brightness HUD), enabling easy three-dimensional distance measurement by a single person.

● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Both compression and tension ● Screw: Male thread (M5)

●Pen-type load cell, maximum load: 50N ●Can be held by hand to apply force, allowing for measurement of small areas.

● Measurements in environments where water may splash are also possible. ● A connection to a display unit (M1E-ZTI) is required for outputting load values.

● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples.

●Maximum load: 2000N-20kN ●Fix the equipment so that the lead wire protrudes, and measure the load applied in the compression or tension direction. *Only unidirectional forces in compression or tension can be measured. Please decide the installation orientation according to the direction of the load.