シロ産業 List of Products and Services

● Compact, lightweight, and suitable for narrow spaces ● Sensors can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Suitable for both compression and tension ● Screw: Male thread (M8)

● Easy integration with corner equipment and external devices ● Usable for both compression and tension, can be screwed in, rectangular shape

Since both ends of the load cell have male threads, it can be fixed to equipment, and connections such as eye bolts are also possible. Despite its small size, it can measure up to 5000N.

● The display part rotates, making it easy to adjust the display surface to the front position even after installation. It features a peak hold function and a full 4-digit LCD display with a backlight. The external power-driven model also supports analog output. ● This product accommodates eccentric loads (usable up to a 2° incline) by tilting the piston part. ● It is a new type of hydraulic load cell that uses a digital gauge while being priced affordably. ● Its lightweight and slim design makes installation and portability easy.

■Dedicated measurement probe Can be replaced without troublesome adjustments. Tip dimensions (T) 1.0 × (W) 35 × (L) 65 ■External output, external power supply ■Measurement of surface magnetic flux density: Place the probe perpendicular to the magnetic field lines. ■Measurement of spatial magnetic flux density: Insert the probe perpendicular to the magnetic field lines. ■Incorrect usage: If the probe is placed parallel to the magnetic field lines, accurate measurements cannot be obtained.

■Easy and convenient torque management by simply attaching it to the tool. This is a digital torque measuring device that is used by attaching it between manual handles such as ratchet handles and spinner handles, and sockets. ●Measurement Function It supports both clockwise and counterclockwise rotation directions and allows switching between two measurement modes (Peak Mode and Track Mode). ●Over-Torque Prevention Function It alerts you with a beeping sound (intermittent) as you approach the target torque. You can set the beeping to start within the range of 50% to 95% of the target torque. ●Calibration Certificate Included Includes a calibration certificate that proves it has been calibrated using a practical standard instrument traced to national standards.

■ A driver-type digital torque wrench suitable for small torque management! ● This is a digital torque measuring device (driver type) that uses bits inserted into the holder at the tip. ● It features an over-torque prevention function, allowing tolerance values to be set within a range of 50% to 95% of the target torque, and it alerts you to the tightening status with a buzzer sound and red LED lighting when the tolerance value is reached. ● Comes with a calibration certificate proving it has been calibrated using a practical standard instrument traced to national standards.

●LED Display The adoption of an LED display allows for easy and accurate reading of values without errors. ●High Precision Precision: ±1% + 1 digit (1 scale) ●Easy to Operate - Pressing the buttons (3) on the display operation section emits an operation sound and allows switching between various functions. - After measurement, you can choose between manual reset and auto reset (with variable display time) for the numerical values, accommodating all work scenarios.

● Due to the switching method, it is compact, slim, lightweight, and highly efficient. ● Usable in either constant voltage or constant current mode.

Setting number of stages 1 stage / 2 stages / 1 stage + forecast setting

Two types of font sizes (character height 56.8mm / 101.6mm) are available. All models come with hanging / stationary brackets included.

■Features ● Enables precise torque measurement - Follows changes in torque values with data updates at 2000 times per second - Minimizes the influence of lateral and bending forces with a double bearing support mechanism ● More user-friendly - Easy-to-read screen with the adoption of a high-brightness organic EL display - Simple settings with menu display in Japanese ● Easy data management - Easy connection to a computer via USB - Simple saving of measurement values with the included software - Easy graph creation with optional software (requires Force Recorder)

■Features ● This is a driver type of the advanced digital torque tool "Digi-Rache," which supports extremely low torque. ● It is suitable for a wide range of applications that require management of extremely low torque, such as electrical equipment, electronic circuit boards, chip replacement for cutting tools, and the installation of resin and aluminum parts. ● The bit is magnetically detachable, and by removing the included No. 1 cross bit, bits with a square shank of 6.3mm can be used, such as bits for plate ratchet interchangeable screwdrivers. (Double-ended bits cannot be used.) ● Sockets and bit sockets with a square drive of 6.3sq. can also be used.

●Indication of N pole and S pole direction ●For measuring terrestrial geomagnetism and investigating magnetized substances underground, etc.

●The display unit can switch between mT (millitesla) and G (gauss). ●Data collection is easy because it comes with an SD card.

In today's market, perfect hygiene management is becoming an increasingly important issue for various industries related to the manufacturing and distribution of consumer goods. Among these, the "ATP swab test," which can confirm results in just a few seconds compared to the traditional culture methods that require more than 24 hours to yield results, is emerging as a rapid hygiene testing tool for assessing cleanliness and hygiene after cleaning. This method is expanding into industries related to food, as well as into the medical field, where hygiene management is of high importance, and other sectors.

It has many advantages compared to conventional truck scales.

● Can be attached to a blackboard with a powerful magnet on the back. ● High visibility with bright LED for 15m visibility. ● Equipped with both count-up and count-down functions. ● Built-in buzzer to indicate the end time. ● Palm-sized. ● Highly noise-resistant and suitable for factory use (FA).

- It is not necessary to fix the sensor and display gauge as a pair; combinations can be changed as needed. - It is also possible to use sensors that do not have TEDS data written. - Static strain measurement is possible. - Comes standard with a conversion cable for M24M-1326T connection. - CE mark obtained. - Power supply is AC 100-240V. - Options available include BCD parallel data output, RS232C interface, and D/A converter (voltage and current output).

● Various weighing modes Settings for weighing modes that can be used for specific gravity, percentage, gem scales, and piece counting. A reliable device that can handle a variety of weighing applications in a compact body. ● Bar graph display for easy visibility of weighing range Displays the usage status in 40 divisions relative to the capacity. You can easily see how much more can be weighed. ● Large display with LCD backlight The large and easy-to-read LCD display, with a height of 16.5mm, features a backlight for clear visibility even in dark environments. ● Communication function/Wireless LAN capability Standard equipped with RS-232C bidirectional output. It allows communication with peripheral devices such as printers, as well as communication with PCs and wireless LAN connections. * A serial device server compatible with wireless LAN and wired LAN is required for LAN connection. * RS-232C bidirectional output (optional) cannot be used in conjunction. ● Date and time printed in ISO/GLP/GMP compliant format When connected to our printer, calibration records can be printed in ISO/GLP/GMP compliant format with date and time. Additionally, the interval function allows for output after a certain period of time has elapsed.

Swiss-made sensor adopted (with temperature correction function) Magnetic declination correction function included Built-in electronic compass Slim body with altitude memory and log function, thermometer, barometer, digital compass, and pacer, multi-functional electronic altimeter.

Measurement of gas flow velocity in low to high temperature environments Measurement of flow velocity and flow rate of water, liquids, fuels, etc. Measurement of flow velocity of exhaust gases, biogas, corrosive gases, etc.

■Usage Instructions When the probe is extended, it activates the probe measurement function, and when the probe is retracted, it activates the clamp measurement function. If you perform clamp measurement while the probe is extended, the clamp measurement function will not operate. Please ensure to select one of the functions before use.

There are no difficult operations involved, so anyone can easily perform measurements, making it useful not only for product inspection but also for inspections during the process.

The Tire Pressure Monitoring System is a system that continuously monitors the air pressure in a vehicle's tires.

The Tire Pressure Monitoring System is a system that continuously monitors the air pressure of a vehicle's tires.

■Features ● Compact, battery-operated data recorder with drip-proof and dust-proof design (approximately business card size × height) weighing 130g ● Built-in 3D accelerometer. Simultaneous use of external 3D accelerometers is also possible. ● Capable of high-speed (0.2msec to 1000msec), long-duration, large-capacity data measurement independently. ● Continuous maximum sampling of 20 million points (with built-in high-speed EE-NOR memory). Operates for approximately 30 hours (max) on a built-in lithium-ion secondary battery. ● Data can be read, graphed, saved, and printed on a PC using USB. Includes clock function. Comes standard with data processing software Lad-sim-NanoFV. ● Features CSV conversion and file splitting save functionality. ● Various options available.

■Features ● Switchable between parallel and serial modes ● Automatically selects L/C/R parameters and measures in the optimal range ● Test frequencies: 100/120Hz, 1/10/100kHz ● Capable of measuring D (loss factor), Q (quality factor), and θ (phase angle) ● Ideal for measuring surface mount components with optional accessories ● Data editing on PC is possible via USB/RS232C connection

A handheld thickness gauge, Coating Master, that can measure two substrates—ferrous (magnetic metals) and non-ferrous (non-magnetic metals)—with one device. Efficiently and quickly check important coatings related to design, quality, and durability. Measurement values can be analyzed and managed through computer transfer via a USB port.

■Features The MI1B-CO-181DA has two alarm settings for carbon monoxide gas concentrations at 30ppm and 200ppm. If the measured carbon monoxide gas concentration exceeds the alarm value, it will notify you of the alarm status with an electronic sound and a flashing red LCD. The MI1B-CO-181DA also includes a maximum value hold mode, a mode for reading saved measurement data (10 measurements), a measurement time display mode, a hold function, and an automatic shut-off feature to prevent battery depletion. It is offered at an unprecedented low price.

It also supports long-term monitoring of carbon monoxide gas concentration. The measurement range is broad, from 0 to 1000 ppm. The accompanying analysis software is very easy to operate, allowing anyone to set various logger settings such as measurement intervals (timing) and measurement start times, as well as read data.

● Wash with water after use, hygienic waterproof design (compliant with IP65/JIS Grade 5) ● Dustproof structure suitable for measuring powders and other materials (compliant with IP65) ● Lightweight and robust construction made of aluminum alloy. ● Rechargeable power source that can be used in various locations with low running costs. ● Auto power-off function. ● Easy-to-use remote control. ● Comes standard with a charger and two battery packs. ● Large and easy-to-read display section.

●Large display for easy viewing ●LCD display with a character height of 25mm ●Continuous use for up to 70 hours ●For transaction proof

With one device, you can measure free residual chlorine, total residual chlorine, pH, and cyanuric acid. For measuring residual chlorine, we use powdered DPD reagents, ensuring safe usage. By measuring free residual chlorine and total residual chlorine, you can also determine combined residual chlorine. We offer a multifunctional water quality meter at a low price. The automatic zero calibration makes operation easy. The main unit and reagents are delivered in a hard case.

The product consists of a detection tube and a gas sampler. The detection tube is a glass tube with a constant inner diameter, tightly filled with a detecting agent, with both ends sealed and concentration scales printed on its surface. The gas sampler has a piston that creates a vacuum inside a cylinder of a fixed volume (100ml/50ml), allowing it to function as a suction device. When the gas sampler and detection tube are used to draw in sample gas, a color change occurs in the detection tube if the target substance is present. The length of the color change corresponds to the concentration of the target substance, allowing the concentration to be read from the scale printed on the detection tube. ● A chip breaker with a smooth cutting surface and a safe design that eliminates flying debris The chip breaker, used to cut the tip of the detection tube before measurement, employs a diamond cutting edge. It boasts excellent durability and allows for a consistently smooth cut of the detection tube. Additionally, it is designed to prevent chip scattering. ● Lightweight for smooth operation, even for women While maintaining high airtightness, the inner diameter of the piston is finely designed. It can be smoothly pulled all the way with minimal effort. It is lightweight enough for women to handle easily. This design ensures smooth operability that anyone on site can manage.

PSC mark (Product Safety of Consumer Products Act) certified product.

The ultrasonic thickness gauge/M1458TS-60FS can measure the thickness of various metal and non-metal materials (such as glass, ceramics, plastics, etc.). It allows for easy measurement of the thickness of different materials through which ultrasonic waves propagate. It can store up to 10,000 measurement data points and save up to 100 sets of configuration conditions. It is ideal for thickness measurement and corrosion/thinning inspection, featuring a coating cancellation function (measuring only the base material without measuring the paint film). This is a state-of-the-art ultrasonic thickness gauge with a lightweight and compact design: only 0.6 kg and dimensions of 105 mm × 180 mm × 42 mm.

● Wind speed measurement range: capable of measuring from 0 to 200 m/s ● Temperature measurement range: capable of measuring in environments from -10 to 140℃

■Features ●Measurement in Dusty Atmospheres and High Humidity Environments This is a highly durable sensor that does not use moving parts or heaters, making it very unlikely to be damaged by wear or adhesion from dust. Therefore, it is capable of measuring wind speed in dusty environments. Additionally, it can measure flow rates in high humidity, condensation environments, and corrosive gases. In cases of dust adhesion, cleaning is also possible. It can be used in explosion-proof areas (ATEX certified). ●Applications Air, exhaust air, activated sludge air, natural gas, exhaust gas, process gas, biogas, incinerator gas, flare gas, engine exhaust gas for transport machinery, exhaust gas from semiconductor manufacturing equipment, and flow rate and flow measurement of various other gases. ●Measured Gases Single or mixed gases such as air, nitrogen, oxygen, steam, carbon monoxide, methane, natural gas, ammonia, argon gas, biogas, exhaust gas, etc. For other gases, please inquire.

The power supply is entirely provided by the computer, making it very easy to handle. With application software included, anyone can start measuring immediately. The power capacity for the bridge has increased, allowing for up to four 350Ω load cells to be connected in parallel (87Ω). In addition to being compliant with the RoHS directive, it features complete insulation, significantly reducing common-mode noise and improving various performance aspects. Each unit is tested before shipment, ensuring you can use it with confidence.

● Compact body with an easy-to-read large LCD display. ● Easily check dryness and moisture levels with upper and lower limit functions.

The MI1C-367M series has the temperature accuracy required for quality control, and it is also ultra-compact and robustly built.

Electromagnetic flowmeter pursuing lightweight and simplicity. Auto-zero function. Both the main unit and the detection unit weigh less than 500g. Convenient for portability. The protective pipe is made of stainless steel and can also serve as an extension pipe.

Snow removal machines and construction machinery operation records and management. The digital operation recording device "Task Watch" replaces mechanical systems. Task Watch accurately records the operation management and activity logs of snow removal machines and vehicle-based construction machinery using an accelerometer. The main unit can be stored in a dustproof and waterproof case with magnetic feet and can be easily operated with "Start" and "Stop" switches. The recorded data can automatically generate construction work daily reports using the standard accompanying software "Task Watch Manager." Similar to mechanical task meters, it records the vibrations of the machinery.