シロ産業 Product Lineup

■Features ●Measurement in m/s, ft/m ●Flow velocity data includes current value, average, maximum, minimum ●Data memory: 30 sets ●Two types of shaft lengths ●Operates for approximately 5 years on lithium batteries ●Device is splash-proof

■Features ●Large display: The largest size in its class, making values easy to read (53×35mm) ●Fast response: Excellent responsiveness to concentration changes ●Customization: The same model can be modified for other measurements (modifications by the manufacturer are required) ●Capable of measuring hydrogen concentration without being affected by hydrocarbon flammable gases such as methane and propane

● Preset function ● Automatic switching of measurement direction ● Ball anvil M2.5 (standard), anvil for upper and lower step differences, anvil with cylinder φ4mm ● Additional base can be supplied ● Data output: USB

The vibrations detected by the gyro sensor are controlled in two axes, horizontal and vertical, through a gimbal mechanism using a voice coil motor. *When the gyro sensor is turned off, it can be used as a regular monocular scope. The gyro sensor has a long battery life design with approximately 30 hours of operation. Available in three lineups: 10-20x zoom, 6-12x zoom, and 10x zoom.

It can detect even the smallest leaks regardless of the type of pipe, such as PVC or steel pipes.

You can detect the position and size of buried metal products.

● Completely unaffected by water pressure and environmental noise - Can detect leak points without being influenced by surrounding noise at all. - Exploration distance of up to 200m and capable of measuring burial depth! - Compatible with all diameters of PVC pipes and poly pipes! - Easy operation for exploring resin pipe routes that anyone can perform. - An excellent adaptive leak detection device that is not limited by water pressure or leak volume! ● Pinpoint detection of water supply pipes and extremely small leaks - Capable of exploring branching points in piping and iron pipe routes as well. - Achieves easy exploration with just dial adjustments for both transmitter and receiver!

● There are two types of reference value settings. With just one button operation, you can easily set up the comparison measurement between the reference color and the sample color. You can also retrieve data stored in the main unit to set the reference value. ● Two measurement diameters to choose from based on the sample. 3mm diameter is ideal for color management of printed materials and small painted areas. 10mm diameter is optimal for color difference management of paints, plastics, and building materials. ● Easy-to-read color LCD display. The color LCD design makes it easy to read and use, displaying approximate colors and graphs of measurement values. The color difference screen shows easily readable reference and comparison values in approximate color. ● Two measurement methods to choose from. Target mark method (stapler shoe) allows you to confirm the measurement position while measuring. Standard measurement method involves placing the sample against the measurement opening. ● Various sample measurement attachments (optional). ● Color management software (optional). Using the color management software, you can perform measurements, data management, graph display of measurement results, printing, and more. You can easily paste various color diagrams and spectral distributions into Word, and transfer measurement values to Excel.

● Users can replace the sensor themselves ● Measurements can be taken 30 seconds after startup ● Built-in 500 memory, capable of outputting to PC software and printer ● Connects exhaust gas, temperature, and pressure to the main unit with one connector ● Charging is possible via AC adapter and USB

● Three types of power specifications available: "AC power specification," "DC power specification," "Battery specification." ● Equipped with pressure correction function: The internal barometric pressure correction sensor eliminates fluctuations in readings due to changes in atmospheric pressure. ● More user-friendly with downsizing and design refresh: Improved operability through miniaturization and weight reduction from previous models, larger display screen size, and the addition of up and down buttons. ● Rich information on the LCD character display: "Main unit operation confirmation mark," "AC/DC power display," "Battery remaining display," "Detected gas name display."

Two types of font sizes (character height 56.8mm / 101.6mm) are available. All models come with hanging / stationary brackets included.

Setting number of stages 1 stage / 2 stages / 1 stage + forecast setting

● Due to the switching method, it is compact, slim, lightweight, and highly efficient. ● Usable in either constant voltage or constant current mode.

●Easy operation Simple measurement comparison with standard color samples can be done with just one button operation. ●Easy-to-read color LCD display ●Equipped with an averaging function ideal for measuring large samples ●Munsell values compatible with two light sources: C light source at 2-degree viewing angle and D65 light source at 2-degree viewing angle ●Download software included as standard with the device 1. Input the regulations of each city into the computer and download the M311R-12HVCN data. 2. Start measurement with the M311R-12HVCN. Perform pass/fail judgment against the regulations of each city.

By quantifying the texture of food, we support the creation of delicious and safe food products.

● Adoption of stable oxygen sensors ● Operation LED for drive confirmation ● Intrinsically safe explosion-proof structure ● Waterproof and dustproof design (IP66) ● Compact, lightweight, and sturdy body ● Low price, high performance ● Low running costs ● One-button easy operation ● Two-stage alarm function (alarm values can be changed optionally) ● TWA/STEL alarm function (alarm values can be changed optionally) ● Vibration function ● Self-diagnostic function ● Loud 95db electronic buzzer ● High-brightness red LED flashing at four locations ● Built-in data logger *About IP standards IP6x... Dust-tight: No ingress of dust. IPx6... Protected against strong direct jets of water from any direction without harmful effects.

● Acquired Exia2CT4X with intrinsic safety explosion-proof structure Detectable even in specially hazardous locations under hydrogen and acetylene atmospheres ● Protection rating equivalent to IP67 Safe to use even in harsh environments ● Equipped with a backlight on the large display Concentration can be checked even in dark places ● Improved visibility during alarms The main unit is equipped with 21 alarm lamps that flash sequentially, enhancing visibility during alarm activation

■Dedicated measurement probe Can be replaced without troublesome adjustments. Tip dimensions (T) 1.0 × (W) 35 × (L) 65 ■External output, external power supply ■Measurement of surface magnetic flux density: Place the probe perpendicular to the magnetic field lines. ■Measurement of spatial magnetic flux density: Insert the probe perpendicular to the magnetic field lines. ■Incorrect usage: If the probe is placed parallel to the magnetic field lines, accurate measurements cannot be obtained.

●120m Super Long Cable This is a super long cable of 120m. The reel is equipped with a counter that automatically indicates the length that has been pulled out. ●Flexible Camera Movement The camera at the tip is flexible. It is illuminated clearly by 18 LED lights. ●Large 7-Inch LCD Equipped with a 7-inch TFT large LCD that is easy to see even on site. It also has a sunshade, making it easy to see the screen and providing peace of mind when used outdoors. ●Possible to Display on a TV Monitor With an AV output cable (sold separately), it can be displayed on monitors with video terminals such as TVs. This allows for group verification or filming while viewing on a large screen. ●Includes Three Attachments A wing-shaped attachment is included. It can easily advance in areas with a lot of debris inside pipes.

● Equipped with a loading roller It can be inserted lightly and smoothly. ● Standard slow-down function When the control lever is pulled to the highest position, it can descend quietly. ● The handle is wrapped with grip on steel It is durable and can be firmly grasped. ● Safety features Jack pump with overload prevention function according to German standards. It will not rise if the load exceeds 110% of the maximum evenly distributed load.

● It is a thin type with a minimum fork height of 55mm. ● It is equipped with a slowdown function as standard, allowing for quiet descent when the control lever is pulled to the highest position. ● The steering wheel and load wheels are made of polyurethane, making it easy to transport without leaving marks on the floor and keeping it clean. ● The handle features an ergonomic design based on human factors. ● It is a convenient transport device that scoops up loads on flat pallets with the fork and is manually transported.

● This is a slim type with a minimum fork height of 51mm. ● The road wheel is a single type and moves lightly during operation.

● The display part rotates, making it easy to adjust the display surface to the front position even after installation. It features a peak hold function and a full 4-digit LCD display with a backlight. The external power-driven model also supports analog output. ● This product accommodates eccentric loads (usable up to a 2° incline) by tilting the piston part. ● It is a new type of hydraulic load cell that uses a digital gauge while being priced affordably. ● Its lightweight and slim design makes installation and portability easy.

●Peace of mind with the adoption of interchangeable probes Interchangeable probes that can be easily removed with one touch. In the event of a failure, measurement can continue simply by replacing and calibrating the probe. ●Convenient stand for measurements The probe can be placed on a stand, making it convenient for fixed-point measurements. This enhances the reliability of the data.

● Detects leaks of refrigerants such as freon and sounds an alarm. ● Available in explosion-proof and waterproof types, allowing detection in various locations. ● Can be centrally managed using a multi-control panel (sold separately) for 2 to 24 units. ● Equipped with connection output that allows linkage with external devices such as ventilation fans. ● Equipped with linear, analog outputs, and digital (relay) outputs that are compatible with most BMS (Building Management Systems).

Since both ends of the load cell have male threads, it can be fixed to equipment, and connections such as eye bolts are also possible. Despite its small size, it can measure up to 5000N.

● Easy integration with corner equipment and external devices ● Usable for both compression and tension, can be screwed in, rectangular shape

● Compact, lightweight, and suitable for narrow spaces ● Sensors can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Suitable for both compression and tension ● Screw: Male thread (M8)

●Maximum load: 2000N-20kN ●Fix the equipment so that the lead wire protrudes, and measure the load applied in the compression or tension direction. *Only unidirectional forces in compression or tension can be measured. Please decide the installation orientation according to the direction of the load.

● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples.

● Measurements in environments where water may splash are also possible. ● A connection to a display unit (M1E-ZTI) is required for outputting load values.

●Pen-type load cell, maximum load: 50N ●Can be held by hand to apply force, allowing for measurement of small areas.

● Compact, lightweight, and suitable for narrow spaces ● The sensor can be screwed at both ends, making it easy to integrate into equipment and secure samples ● Direction of force: Both compression and tension ● Screw: Male thread (M5)

● This is a CMOS camera with an ultra-small head of φ5.5mm×27mm. (Uses a 1/8” CMOS sensor) ● It does not require an external controller, allowing for direct extraction of the analog video signal from the camera, enabling long cable extensions (up to 30m). ● The output can be either a video terminal (RCA) output or a rectangular 4-pin connector (video, power, GND). It can be viewed on a TV monitor with a standard video terminal (RCA connector) input. ● It can be connected to a separately sold video recorder with an LCD and a rectangular 4-pin conversion plug. (Power supply is also possible.) ● In addition to the rectangular 4-pin connector, there is also a bare wire output type without a connector available. (Power supply voltage is 3.3V)

● Directly removes metallic foreign substances from the product using the power of magnets. ● How to use ・ Immerse the product in the container and manually stir with a magnet bar to remove iron. ・ Manually remove metal shavings that come out when opening canned raw materials.

With a single sensor, it can measure UV light across a wide wavelength range (from 300nm to 450nm).

●Easy-to-read large screen LCD ●Convenient for portability ●Easily measures fine particulate matter (PM2.5) and radiation levels in a short time (Note) Radiation measurement is only possible with the MC29E-361DS ●Records one month's worth of measurement data in the unit, and data can be transferred to a PC using the included cable ●Alerts you with a warning sound when the set values are exceeded

■For precise measurement of various gas concentrations ■It is an optical wave interference gas monitor.

■Features ● The shape of the push needle, the dimensions of the pressing surface, and the spring force comply with the following standards: - JIS K 6253 "Test Methods for Hardness of Vulcanized Rubber" - IOS 7619(E) "Rubber - Determination of indentation hardness by means of pocket hardness meters"

● Compact and lightweight, can be carried in a pocket during work shifts ● PID lamp and sensor can be easily disassembled for maintenance in a short time without tools ● Large key operable while wearing gloves ● Supports 12 languages including Japanese ● Easy-to-read backlit display ● Stores data at 1-minute intervals for up to 3 months, with optional data logging function for downloading to PC ● Alarm signals that change in response to various alarm conditions including STEL, TWA, and peak ● Compatible with 10.6eV lamp and 9.8eV lamp

●Compact size ●Zero calibration function

- Rechargeable battery specification for repeated use - Protective cover included as standard to protect the main unit from scratches, dirt, and impacts - Compact and lightweight design that does not interfere during work - Intrinsically safe explosion-proof structure suitable for use in hazardous locations

■Features ●Compact and lightweight, easy to hold and simple to operate. ●Clearly indicates the measured concentration with a digital bar graph and digital numbers. ●Intrinsic safety explosion-proof structure (Ex ib d 2B T3) *The sensor part has a pressure-resistant explosion-proof structure.

In addition to data collection using the separately sold communication port and data collector, data collection via infrared communication with mobile phones has also become possible.

・Intrinsic safety explosion-proof structure ・Can be used as explosion-proof equipment even in hydrogen and acetylene atmospheres