シロ産業 List of Products and Services

● Equipped with high-speed autofocus, eliminating the hassle of focusing. By simply pressing the high-speed autofocus button, you can instantly focus, allowing you to see the subject immediately and reducing work time. ● Easy magnification switching with a one-handed switch. The switch allows for easy adjustment of four levels of magnification, and fine-tuning of focus is possible with the focus button located at the bottom of the device. ● The built-in LCD display allows you to check the current magnification and focal distance.

● Equipped with the latest autofocus Full HD camera. Achieves clearer and more visible images. Reduces noise and minimizes reflections even when capturing glossy paper, allowing for comfortable reading and writing. It can also display thin lines on the paper. ● The three buttons located at the bottom of the screen allow for easy adjustment of magnification, mode, contrast, and more. Additionally, it is possible to display lines on the screen with the "line display" feature, or to mask part of the screen with the "mask display" feature.

● With a thickness of 22mm and a weight of approximately 680g, it is thin and lightweight, making it convenient to carry and use while out. You can use it in various scenarios such as checking menus, enjoying the scenery, or filling out documents. ● It is equipped with many useful features, including line/masking, image saving/playing, and location display functions.

It employs a state-of-the-art optical system and a tungsten light source based on the plans of the EPA (U.S. Environmental Protection Agency), demonstrating its accuracy and reliability, particularly in measuring low turbidity (below 0.05 NTU). Additionally, it allows for the recording of various measurements on-site using a tag identification device and the verification of calibration status through GLP functions.

● You can easily check intricate areas like inside a wood stove chimney. The camera head and camera cable are waterproof, so they can be washed with water even if they get dirty. ● Images can be saved to a microSD card (sold separately), allowing you to review them slowly on a computer or similar device. ● After use, the camera cable can be wrapped around the main unit for compact storage.

●Explosion-proof function ・Can be used in explosion-proof areas (ATEX compliant) ●Data logging function ・Storage of 40,000 measurement data points and PC output ・Large LCD with excellent operability and touch keys

Despite being an inexpensive lever type, it achieves high reproducibility.

Accurate measurement in 1 minute If there is too much smoke from the smoke guide, it can cause soot buildup in the boiler, necessitating frequent service visits. This is where the smoke tester comes into play. It draws in combustion exhaust gases and compares the smoke that adheres to the filter paper with the smoke scale to determine the smoke density. It can be used on all burners and can measure the smoke density accurately within one minute. It has obtained TÜV By RgG (German standard) certification and is widely accepted as a global standard method, earning trust through its long-standing performance in the burner industry.

● A temperature data logger with 32,767 memory capacity, capable of measuring temperatures at two locations simultaneously. ● It uses a platinum resistance thermometer Pt-100 for temperature sensing, providing a high measurement accuracy of ±0.1℃. ● It can be continuously used from ultra-low temperatures of -40℃ to high temperatures of +140℃. ● It continuously records temperature at specified intervals ranging from once per second to once every 24 hours. ● Recorded data can be quickly downloaded to a computer using a USB cable, allowing for various data analyses. ● Pressure-resistant and waterproof structure IP68. ● Flexible SUS extension probe cable. ● Long battery life with user-replaceable batteries.

●Easy installation with USB 2.0 connection ●Equipped with 4x optical zoom, screen magnification x45 to 180 ●Dedicated conversion lenses for x0.5 and x2.0 available (optional) ●Constant working distance of 88mm ●Equipped with a mechanical variable aperture ●Can save still images (BMP, JPG) ●Made in Japan for reliability and durability

●Easy magnified observation like watching TV ●User-friendly long working distance (M856KM-S10B-TV has 40mm at 100x) ●High definition 410,000 pixel CCD ●Robust aluminum body ●Stable stand included (M856KM-S10B-TV)

The M1026VR-T2T is ideal for managing lamp intensity in UV irradiation devices used for curing, sealing and adhesive processing of electrical and electronic components, printing, drying, and mounting lines for printed circuit boards, as well as sterilization processes in various industries. *Various light-receiving and display units are sold separately, so please select the light-receiving unit according to your application and combine it with the display unit. Four types of light-receiving units are available to match the desired wavelength (please select at the time of purchase). It is equipped with a function to automatically recognize the four types of light-receiving units.

●Easy operation ●Ideal for color quality control in fields such as rubber, paint, patterns, clothing, and food. ●Applicable in a wide range of quality control in industries such as plastics and printing. ●Quickly displays color differences (△E*ab, CIE_Lab, △L, △a, △b, CIE_Lch). ●Measurement accuracy is within △E*ab 0.2. ●Can measure colors on smooth surfaces. ●Inspection and data management are possible through connection to a computer (software USB expansion interface).

- This is a dissolved oxygen meter that uses a fluorescent sensor. - It features automatic temperature compensation, automatic pressure compensation, and manual salinity compensation. - The electrode lifespan is 8000 hours, achieving stable measurements and excellent cost performance. - It is equipped with an automatic hold function for measurement values and an automatic power-off function. - The meter has a waterproof specification equivalent to IP57. - It comes with a dedicated carrying bag for convenient transport.

● Supports 17 major chemical substances, including toluene. You can select the target substance from 17 types of chemical substances. When the concentration of the selected substance in the air reaches the alarm level (TWA, STEL), it will notify you with a buzzer or lamp. ● Real-time confirmation of the instantaneous value, average value, TWA value (time-weighted average), and STEL value (short-term exposure limit) of the chemical substance concentration in the air. * TWA value (time-weighted average) The time-weighted average concentration of harmful substances that is considered not to adversely affect the health of most workers when exposed repeatedly during normal work of 8 hours a day or 40 hours a week. * STEL value (short-term exposure limit) The concentration of harmful substances that does not adversely affect the health of workers if they are exposed continuously for 15 minutes and their daily exposure is below the TWA value. ● Compact and lightweight, it does not interfere with work. ● Built-in NFC for easy data reading. It can be easily imported using the log data collection set (optional).

●Tip diameter: φ25mm with 12 high-brightness LEDs ●Rigid fiberglass cable standard 20m (maximum 70m) ●Easy cable deployment and retraction with a stationary drum (with carry case) ●Handheld 3.5-inch LCD monitor included ●Dustproof/waterproof: IP67 rating ●Ideal for inspecting observation points inside pipes with a diameter of 40mm or more

● Comes with 4 high-brightness LEDs ● The movable camera at the cable tip allows for smoother insertion into angled areas ● Easy dial operation to set the pan direction, lock, and secure it ● The camera with LED lighting is ideal for observing in tight and hard-to-reach places ● Monitor images are saved in real-time to the built-in SD card, whether as still images or videos ● The cable is detachable

● Comes with 4 high-brightness LEDs ● The movable camera at the cable tip allows for smoother insertion into angled areas ● Easy dial operation to set the panning direction and lock it in place ● The camera with LED lighting is ideal for observing in tight and hard-to-reach spaces ● Monitor footage can be saved in real-time to the built-in SD card, whether as still images or videos ● The cable is detachable

● Equipped with two types of cameras at the tip of a super-thin 5.8mm cable ● Allows for direct and side (90°) observation by switching the hand-held switch ● Real-time monitor images can be saved to the built-in SD card as still images or videos ● With LED lighting, it is ideal for observation in narrow, dark, and hard-to-reach places.

●Tip diameter: ultra-fine φ3.9mm to φ10mm ●Equipped with 4 high-brightness LEDs (dimmable) ●Can reach even the narrowest and darkest places ●Straight-type cable can be manufactured up to 30m in length ●Stylish & original color 3.5-inch LCD monitor ●Record videos and still images with the push of a button (includes 4G SD card) ●Equipped with the latest features: 2X digital zoom, image mirroring, 9-image batch recall & 2-image comparison, built-in lithium-ion battery

● Effortlessly transport heavy loads with electric driving. Equipped with a butterfly-shaped throttle lever, it reduces fatigue during long-distance travel with excellent operability. ● New features have been added that were not present in the conventional MC30R101 series, significantly evolving to pursue ease of use.

● When observing with a high-magnification microscope, indentations can be seen. ● The measurement reaction is fast, displaying results in 2 seconds. ● The large LCD display shows measurement results, counts, maximum values, minimum values, average values, and deviations. ● Easy to operate. ● With a large-capacity data storage function, it can save up to 1000 measurement data. ● Simple calibration operation. Efficiently saves 20 calibrated data for immediate use during the next calibration.

This is a carbon dioxide gas monitor/controller for controlling the concentration of carbon dioxide gas and monitoring indoor CO2 levels. It displays CO2 concentration and temperature simultaneously. There are two operating modes. Switching between modes is easy. Greenhouse Mode: This operating mode manages the concentration of carbon dioxide gas used to improve crop growth and activates when there is sunlight or artificial light such as LEDs, and the light sensor is operational. The light sensor detects the presence of light, and during the night or in darkness when photosynthesis does not occur, the relay does not operate regardless of CO2 concentration. When the CO2 concentration drops to a specified low level, the relay turns ON, activating the electromagnetic valve attached to the carbon dioxide generator or gas cylinder. Then, when the CO2 concentration reaches a specified high level, the relay turns OFF. Ventilation Mode: When the CO2 concentration reaches a specified high level, the relay turns ON, activating ventilation fans, etc. When the CO2 concentration drops to a specified low level, the relay turns OFF. The light sensor is not used in ventilation mode.

● The data transmission distance is approximately 5 meters in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

● Ideal for measuring large diameter outer diameters. ● Data transmission distance is approximately 5m in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

● It can be measured with center pitch measurement and direct reading. ● The data transmission distance is approximately 5 meters in line of sight. ● It adopts a response-back method. ● The transmitter is built into the digital display section. ● One receiver is included with the caliper body.

● The depth bar is thin at φ1.5mm, making it ideal for the depth of small diameter holes. ● The data transmission distance is approximately 5m in line of sight. ● It adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the caliper body.

● The data transmission distance is approximately 5 meters in line of sight. ● Adopts a response-back method. ● The transmitter is built into the digital display unit. ● One receiver is included with the main body of the caliper.

This device adopts a weightless automated testing force application, using a 0.5% accuracy compression sensor for feedback, and the CPU control system automatically compensates for any lost testing force during the test. The testing force and load holding time can be directly selected on the touch panel, providing high measurement accuracy, good reproducibility, and convenient operation.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. This device has a testing force of 10 levels and 13 types of Brinell testing scales for any selection. It is equipped with three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lenses and indenters. The dwell time of the testing force and the brightness of the light source measuring the indentation can be adjusted. It can display the measured indentation length, hardness value, number of measurements, and more. Conversion values between each hardness scale can be selected. Test results can be checked or printed out with the built-in printer, or saved by connecting to a computer via the RS232 interface.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. This device has 10 levels of test force and 13 types of Brinell test scales for any selection. It is equipped with three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lens and the indenter. The dwell time of the test force and the brightness of the light source for measuring the indentation can be adjusted. It can display the measured indentation length, hardness value, number of measurements, and more. Conversion values between each hardness scale can be selected. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface.

The testing process is controlled by the CPU, which manages the automatic switching function between the objective lens and the indenter. The switching position employs mechanical and electronic double matching, resulting in high positional accuracy. The built-in touchscreen tablet allows for more intuitive parameter settings and result displays, making operation convenient. It avoids stimulation from the microscope light source and visual fatigue, reducing measurement errors. This device has ten levels of testing force and thirteen types of Brinell testing scales for any selection. It features three sets of ball indenters and two sets of objective lenses, automatically recognizing and switching between the objective lenses and indenters. With high magnification, the observed surface becomes very clear. Depending on the selected hardness scale, the equipment automatically selects the corresponding indenter and objective lens. The automatic lifting table adopts a precise structure with high stability, automatically rising when measurements begin, returning to the focus position after the testing force is applied, achieving one-key automation. It adopts an integrated design of the hardness tester and panel computer. Equipped with a Windows 7 system, it has all functions operable on the computer.

Adjustable sensitivity Leak display Auto warm-up Battery display Power display Overcharge/overcurrent protection Charging status display

● Equipped with a measurement range switch ● Data hold function ● Low battery indicator ● Overload indicator ● Automatic power off function ● Maximum, minimum, and difference luminance calculation function ● Backlight display function

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system. This device employs a weightless automated test force application and uses a 0.5‰ precision compression sensor for feedback, while the CPU control system automatically compensates for any lost test force during testing. The device is connected to a digital micro eyepiece, eliminating the need to look up at the specimen platform, and there is no need to input the diagonal length of the indentation. It can directly display the hardness value, test force, dwell time, and indentation length. After measuring the indentation length, pressing the eyepiece button will automatically retrieve and display the hardness value on the screen.

The digital Brinell hardness tester is a microcontroller-controlled Brinell hardness tester that combines a precision mechanical structure with a closed-loop control system. This device employs a weightless automated test force application and uses a 0.5‰ precision compression sensor for feedback, while the CPU control system automatically compensates for any lost test force during the testing process. The indentation of the impression can be measured directly with a digital microscope eyepiece, and the test force, indentation length, dwell time, number of measurements, conversion scale, date, and time can be intuitively displayed on a large screen. After measuring the indentation length, pressing the eyepiece button allows for the automatic acquisition and display of the hardness value on the screen. Test results can be checked or printed out using the built-in printer, or saved by connecting to a computer via the RS232 interface.

The MI1T-926M is a data logger with a memory capacity of 51,840. You can freely select the logging interval from once every second to once every hour, allowing for long-term recording of solar intensity based on the logging interval. Alarm settings are also possible; if the measured solar intensity exceeds the specified level, an LED will flash to notify you of the alarm. The recorded data can be quickly downloaded by connecting the device to a computer's USB port, and various data analyses can be performed using software compatible with Windows 10.

The conversion of test force is achieved by the rotation of a variable load handwheel. This device allows for the selection of dwell time and is very easy to use. Aside from dialing to zero, there are no manual operational errors, and it has high sensitivity and stability.

You can display and set the current hardness test scale, test force, test indenter, dwell time, hardness conversion values, and types of indenters. The main features are as follows: Selection of Rockwell hardness scales; conversion between each hardness scale; adjustable display backlight with energy-saving mode. Real-time data is saved in folders, with a total of six data folders available. You can delete, print, and output any file data. The results of hardness measurements are saved in real-time, with maximum, minimum, and average values automatically calculated and intuitively displayed on the operation display screen. It is equipped with an RS232 interface for connection to a computer.

●Measurement range: 0-100ppm ●Resolution: 0.1ppm ●Error: ±2% ●Sensor: Electrochemical type

The M2700T-383T is a mini-type illuminance meter that effectively represents light intensity with electrical signals and is equipped with photoelectric detection technology. It has a wide measurement range from 0 to 199,999 lux and features automatic range shifting. It includes a data hold function, as well as maximum and minimum value measurements. The 4-digit LCD display can show a maximum value of "9999." It is equipped with a backlight for use at night or in dark places. It can withstand impacts from a height of 1 meter. With a non-slip design, it fits securely in the hand. The measurement units can be switched between lux or FC. The backlit LCD display makes operation in the dark easier.

Product Name: Metal Detector Manufacturer: Anritsu Model Number: KD1116AW Dimensions: Width 800 × Depth 615 × Height 1200 mm Weight: Approximately 102 kg Power Supply: Three-phase 200V 50/60Hz Pass-through Dimensions: Approximately Width 290 × Height 180 mm <Year of Manufacture> 2005

It is suitable for individually packaged products and containers such as bottles and bolts with a compact machine.

Belt width 220mm Tunnel size Width 295 x Height 120 (mm) Maximum inspection item dimensions Width 290 x Height 115 (mm) Maximum inspection item weight Up to 5kg External dimensions Length 800 x Depth 600 x Height 1190 (mm) Machine weight Approximately 80kg

Product Name: Metal Detector Manufacturer: Anritsu Model Number: KD1116AW Dimensions: Width 800 × Depth 615 × Height 1200 mm Weight: Approximately 102 kg Power Supply: Three-phase 200V 50/60Hz Pass-through Dimensions: Approximately Width 290 × Height 180 mm