シロ産業 List of Products and Services

●Measurable from various angles ●High reliability and long lifespan ●Simultaneous measurement of SCI (including specular reflection) and SCE (removal of specular reflection) ●Measurable from various angles ●Smooth color communication is possible

Measurement range: 0 to 200.000 Ix 4 range switching Angle deviation correction Zero adjustment function Data hold (Max, reading value) function included Low battery indication function

Measurement range: 0 to 2,000 W/m² Resolution: 0.1 W/m² Display unit switching function Data hold, Max, Min display function

Radiant intensity (W/m²) UVA (W/cm²) Illuminance (lx) Max.Min.Avg value display function Auto power off function (settable from 0 to 99 minutes) Low battery indication function

UVA/UVC SD card memory 2 range switch (2mW/cm² and 20mW/cm²) RS-232C output

This series converts and outputs light and radiation amounts in the spectral range of UVA, UVB, and UVC, as well as in the wavelength range of 400 to 950 nm, into signals of 0-10V or 4-20mA, measured in illuminance (Lux), luminance, equivalent light curtain luminance (cd/m²), or radiant intensity (W/m²).

The light intensity sensor with a cable that can be extended up to 50 meters is a separate type, allowing it to be installed in the correct position for measuring light intensity.

●Low-cost energy saving This is a stationary multi-sensor active tag equipped with low power consumption wireless IC. ●Long lifespan When used under standard settings, the battery lasts for approximately 10 years. ●Equipped with various sensors It has built-in temperature, humidity, illumination, acceleration, and pressure sensors, capable of wirelessly transmitting sensor data. ●LCD display function The built-in LCD screen allows for real-time monitoring of sensor data. ●Vibration detection function When detecting acceleration above a specified threshold, the wireless eco-sensor automatically transmits data. ●Communication distance It can communicate up to approximately 50 meters with the built-in chip antenna. ●Micro SD card compatible By inserting a micro SD card, it can record up to approximately 10 million data points. ●Wall mountable It can be installed on a wall using the included wall hooks. ●Radio law construction design certification

● The manual range switch allows for a wide range of illuminance measurements from 0 to 400,000 Lux / 40,000 foot-candles (fc). ● It automatically compensates for differences in light sources, enabling illuminance measurements with any type of light source, such as tungsten bulbs, fluorescent lights, mercury lamps, and sodium lamps.

● It comes with a data logger function (7,000 points). ● Data can be transferred to a PC via the RS232C interface. ● It has zero adjustment and angle deviation correction functions, allowing for high-precision measurements. ● Suitable for measurements in warehouses, factories, offices, schools, etc.

This is an affordable illuminance meter that supports a wide range of measurements from low light levels of 0 to 40.00 Lux, 400.0 Lux, 4000 Lux, 40.00 kLux, to ultra-high light levels of 400.0 kLux, with a 5-range switch. The sensor unit is separate from the main body, allowing you to orient the sensor in the optimal direction for more accurate illuminance measurements.

● Auto range switching (Ix: 40/400/4,000/40,000/400,000) ● Easy data management with data hold function and Max.Min.Ave display function

It is possible to measure over a wide range with an automatic range switch from 0 to 40,000 Lux. The MI1T-97M features a maximum illuminance memory display function in addition to the standard illuminance measurement mode.

●Compact pocket-sized all-in-one design ●Simple operation with a single button ●Large LCD with automatic backlight function

■Measurement Items ・Illuminance Measurement ・Temperature Measurement (Thermocouple Type K/J)

Digital light meter

Color rendering evaluation measurement device compatible with high-quality next-generation lighting such as LED lighting and organic EL lighting. The only spectroradiometer compliant with both JIS and DIN standards (as of December 2011). Equipped with easy and convenient PC software as standard.

The MI1UV-50N ultraviolet intensity meter is a compact, lightweight, pocket-sized digital ultraviolet measuring device designed to measure the total intensity of both near ultraviolet UVA waves (315-400nm) and medium ultraviolet UVB waves (280-315nm).

The MI1UV-57N is a compact, lightweight, pocket-sized digital UV meter designed to measure the total intensity of both near ultraviolet UVA waves (315–400nm) and medium ultraviolet UVB waves (280–315nm).

The MI1UV-60N is a compact, lightweight, pocket-sized digital UV meter that measures only medium ultraviolet UVB waves (280-315nm), which are said to have an impact on the skin that is 100 to 1,000 times greater than ultraviolet UVA waves.

The UV intensity meter MI1UV-62N is a compact, lightweight, pocket-sized digital UV measuring device that measures only the medium ultraviolet UVB waves (280-315nm), which are said to have an impact on the skin that is 100 to 1,000 times greater than that of ultraviolet UVA waves.

The UV intensity meter MI1UV-65N is a new type of UV intensity meter that automatically calculates and displays the UV index based on the intensity of UVA and UVB.

●Compliant with JIS AA grade and DIN Class B Illuminance meter for next-generation lighting compatible with PWM light ●The mini light receiver and cable are waterproof. ●Multi-point measurements can be easily and inexpensively performed. A mini light receiver is also available, allowing for illuminance measurements in narrow spaces. ●Compliant with JIS AA grade and DIN Class B The T-10A and T-10MA comply with JIS C 1609-1:2006 General Class AA illuminance meter and DIN 5032 Part 7 1985 edition Class B. They are reliable illuminance meters that pursue high precision and high reliability. *This device has obtained type approval under the Measurement Act for the main unit and light receiver as a single unit. Type approval has not been obtained for using the main unit and light receiver separately (cable extension/multi-point measurement). The type approval number applies to combinations where the serial numbers on both the main unit and light receiver are the same.

●Measurement range setting: Manual/Automatic switchable ●Maximum and minimum value display

Compact, lightweight, easy to operate, and battery-powered cordless gloss meter compliant with JIS, ISO, and ASTM gloss standards. ● No warm-up time required; gloss standard setting and average value setting are easy with one-touch operation. ● Both fixed and multi-angle types display measurement data simultaneously and instantly. ● Automatically accommodates a wide measurement range from 0 to 2000 gloss units. ● Equipped with pass/fail judgment function for each angle or simultaneous judgment for three angles. ● Features for storing, saving, inputting, referencing measurement data, and data correction, etc. ● Visual display indicating battery level at a glance.

Equipped with a high-precision compact spectrometer Measuring the spectral reflectance of each wavelength of visible light ● Compact design Portable anywhere, regardless of location Easy measurement with one hand

Spectrophotometers can quantitatively analyze the content of samples over a wide range of the visible spectrum and are used in various routine analyses, food inspections, environmental monitoring, universities, the semiconductor industry, the paper industry, the plating industry for chemical concentration management, as well as in the printing and dyeing industries for dye concentration management and wastewater management.

● High detection sensitivity Detects a No. 10 silk needle at a height of 11 cm above the detection surface. (Needle dimensions: 33.3L × 0.56φ mm) ● Six levels of sensitivity adjustment via a switch. Sensitivity can be selected according to the type and size of metal accessories such as buttons, zippers, and hooks, allowing adjustment for the influence of accessories. ● The alarm buzzer sound varies depending on the size of the detected "needle," allowing for differentiation between large and small. ● Stable operation with strong resistance to vibration. ● Can be integrated into a workbench.

● Spectrum display mode: Comparison display up to 4 measured wavelengths is possible. ● Color rendering evaluation mode: CIE 1931 chromaticity coordinates, black body trajectory, color temperature, color rendering index. ● Energy measurement mode: Illuminance in Lux, PPFD photosynthetic photon flux density in μmol/m²/s, color temperature in K. ● Calibration via numerical input is possible.

The M2536T-FD series, based on the manufacturer's patented technology, features an extremely robust design without moving parts, promising maintenance-free operation for several years with 99.9% data acquisition even in harsh environments. ● Improved accuracy through the latest design technology Adopting innovative design technology has led to better control of airflow and improved accuracy. Through software enhancements and a state-of-the-art calibration wind tunnel, the M2536T-FD series achieves a high level of accuracy in wind direction and speed measurement. ● Can be directly mounted on a Φ33.7mm pipe. ● Maintenance-free The aluminum alloy body provides high durability against corrosion, dust, ice, sunlight, and bird attacks. The dust and water resistance standards adapt to changes in air temperature, pressure, and humidity. ● Compact and lightweight portable design The M2536T-FD series is very compact, with a height of 162mm and a weight of 380g, making it convenient to carry. ● This sensor has RS485 or a 4-20mA current output, and the output data can be provided in m/s, km/h, or knots.

Even for long piping that is difficult to remove and inspect, it is possible to conduct inspections deep inside with a long cable of up to 40 meters. The stiff type of cable makes it easier to advance in the direction of travel when inserted into the piping. The diameter of the front camera is 23 mm with a focal length of about 20 cm, and it can be used in pipes with a diameter of 40 to 100 mm. Additionally, it can pass through a 90-degree elbow (bend) three times in pipes with a diameter of 45 mm. With a field of view of 135 degrees, it is possible to observe the condition of the sides without having to point the camera directly at the side of the piping.

- M396S-150N: Capable of measuring a range of 0.01 to 999,900 cd/m² at a measurement angle of 1°. - M396S-160N: Capable of measuring a range of 0.1 to 9,999,000 cd/m² at a measurement angle of 1/3°.

- Equipped with a self-diagnosis function for reliability, it alerts you to battery replacement or pump connection issues with a buzzer and screen display. - Extremely low interference effects and high precision. ■ Applications Ideal for simple measurement of formaldehyde. ⇒ Measurements can be conducted in accordance with the conditions of the "Building Sanitation Law" and "School Environmental Health Standards."

■Usage It can be widely used for field measurements on-site, various research and development purposes, and calibration of medical devices for measuring gas differential pressure and pressure.

Waterproof type belt-mounted metal detector capable of detecting various metals such as iron, stainless steel, and aluminum.

●Operability Adopts a high-precision color touch panel for easy operation. ●Sensitivity Improvement By using a frequency selection method that can accommodate various products, it reduces product influence and improves practical sensitivity. ●Expanded History Function Significantly increases the number of history records and adopts kanji notation. History data and setting values can be saved to a USB memory, and output to a dedicated printer is also possible. ●HACCP Consideration The conveyor is open and the frame uses round pipes.

●Operability Adopts a high-precision color touch panel for easy operation. ●Sensitivity Improvement Improves practical sensitivity by reducing product influence through a frequency selection method that accommodates various products. ●Expanded History Function Significantly increases the number of history records and adopts kanji notation for display. History data and settings can be saved to a USB memory, and output to a dedicated printer is also possible. ●HACCP Consideration The conveyor is open and uses round pipes for the frame.

Belt width / 300, 400, 500, 600 mm

Non-waterproof type

● Simple confirmation of remaining amount (available/not available) through color recognition and voice recognition. ● Automatic power-off function ● Up to 30 hours of long usage ● Lightweight and compact design at 99g ● Compatible with LP gas cylinders with a diameter of 200 to 350mm made of steel and aluminum.

● It is easy to measure by simply blowing into it for 5 seconds when the electronic sound is heard. ● With the 99 memory function, there is no need for a cumbersome connection to a computer. You can check the measurement results at any time using the buttons, making it ideal for recording. ● The mouthpiece can be replaced with commercially available straws, making it very economical. * The following sizes of straws can be used: When using it by inserting into the mouthpiece: φ4mm When using it directly without the mouthpiece: φ7.5mm

ABS case

●Heat-treated stainless steel ●ABS case

●ABS case

■Accessories ● Zoom lens, LED ring light ● Included software (M856K-VST) You can display and save images, view thumbnails, and even measure distances between two points. Additionally, a crossline can be displayed on the screen, which is convenient when using the measurement stage. The magnification of the display can be easily adjusted using the mouse center wheel.