シロ産業 List of Products and Services

The radiation balance meter MC8P-NET07D measures radiation balance in the near ultraviolet and far infrared wavelength ranges. The upper surface of the radiation balance meter detects solar radiation and long-wave radiation from the sky (clouds), while the lower surface detects solar radiation reflected from the ground (albedo) and long-wave radiation from the Earth, measuring the difference as the radiation balance.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Unnoticed, excessive UV exposure is a major enemy to your skin. Let's measure it regularly and take UV care.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The environmental data logger MI1V-764R is a pocket-sized environmental measuring device that can be used as a light meter, ultraviolet intensity meter, thermometer, hygrometer, and dew point thermometer all in one. With its data logger function, which has a memory of 10,900, you can set the measurement intervals to 10 seconds, 1 minute, 10 minutes, or 1 hour, allowing you to monitor light intensity, ultraviolet, temperature, and humidity over a long period, and download that data to a computer using the infrared port.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The "MI1-4-IN-1R" is a multifunctional environmental measuring device that can be used as a sound level meter, illuminance meter, thermometer, and hygrometer all in one unit. It is easy to handle and very simple to operate. The large digital display makes the measurement values very easy to read.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

1. Replacement of the light-receiving part, measurement of three wavelength ranges (center wavelengths 254nm, 365nm, 405nm) and temperature. 2. Measurement of illuminance, peak illuminance, integrated light quantity, illuminance distribution, illuminance of spot light, and temperature distribution. 3. Illuminance distribution measurement for up to 4 minutes with built-in memory.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Switching function between dry batteries and external power supply (AC adapter: optional).

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

It is ideal for confirming biological and chemical coloration, such as with biosensors. You can drop liquid onto the filter of a disposable chip and then check for subsequent coloration and decoloration. The coloration is confirmed by reading the reflected light using a tricolor photodiode.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● It can be operated with one hand, so it is highly functional. ● Comes with a sensor protection cap.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

This is a handheld densitometer (reflectance density meter) ideal for managing gloss and reflectance density of electronic devices, metals, building materials, precision instruments, and more. It can also be used to manage the reflectance density (OD) and reflectance of printed materials and paper.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

This is a resin molded product evaluation measurement device that enables numerical management of weld lines, flow marks, whitening scratches, gloss scratches, and other surface defects. It can also evaluate scratches on products with leather textures or matte finishes.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The spectral response curve of the light measurement probe approximates the human eye's response curve known as the standard photopic curve V(λ). The difference between the "WPLP-PHOT-01" in spectral response and the standard photopic curve V(λ) is calculated as the error f'1. Calibration of the probe is performed by comparing it with a photometer that has been calibrated by a primary metrology standard institution. The calibration procedure complies with CIE Document No. 69 (1987) "Method of Characterizing Illuminance Meters and Luminance Meters." Measurements are conducted by illuminating the probe with standard light A. The outdoor installation type is the MC8P-PHOT3S series.

• Spectroscopic Analysis Equipment

The 【WPLP-PAR-01】 measures the number of light quanta incident on a surface per second in the spectral range of 400 to 700 nm, and the ratio to the unit area (m²). This quantity is defined as PAR, or Photosynthetically Active Radiation. The calibration of the probe is performed using a halogen lamp, with specific spectra being referenced against known spectral radiation. The spectral response of the probe is slightly affected by temperature. Thanks to the special structure of the diffuser and probe, it also responds to changes in the angle of incidence on the diffuser, which is corrected for the cosine law. The outdoor installation type is the MC8P-PHOT3S series.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

WPLP-RAD-01 measures the radiant intensity (W/m²), defined as the ratio of the radiant flux (W) incident on a surface to the unit area (m²), in the VIS-NIR spectral range (400–1050 nm). These features are applicable to instruments suitable for measurements in the visible and near-infrared regions. The calibration of the probe uses the 577/579 nm line of a Xe-Hg (xenon-mercury) lamp through a spectral interference filter. The outdoor installation type is the MC8P-PHOT3S series.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

It measures the irradiance (W/m²), defined as the ratio of the radiation flux (W) incident on a surface to the unit area (m²), in the UVA / UVB / UVC spectral range. With the adoption of a new photodiode, it is insensitive to ? and infrared light. The outdoor installation type is the MC8P-PHOT3S series. ■mV signal output In the spectral regions of VIS-NIR, UVA, UVB, and UVC, it measures light and radiation amounts as illuminance (lux) or irradiance (W/m²). Additionally, it is capable of measuring the number of photons per unit time and unit area in the photosynthetically active radiation (PAR) wavelength range of 400–700 nm. The WPLP series does not require an external power supply.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● Waterproof design for the front panel ● Data hold function ● Peak value display function ● Maximum and minimum value display function

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● Light source selection function (4 types) ● Front panel waterproof design ● Data hold function ● Peak value display function ● Maximum and minimum value display function

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The liquid crystal digital display allows for a wide measurement range of 0.00 to 40000 lx, which can be performed in auto range or with a switch between four ranges.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● Three range switchable from low illumination to high illumination (200/2000/20000 lux) ● Equipped with a data hold function. ● The light sensor and main unit are separable, allowing for measurements at the optimal position.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

■Features ●Convenient operation method ●Production of 5 types of cushions ●Technology verified in the United States and Europe

• Other packaging machines

■Features ● With a production speed of 8 meters per minute, a large amount of cushioning material can be produced in a short time. ● The adjustment button allows you to set the optimal air volume for your needs. ● From the design and manufacturing of the machine body to the production of specialized films, we are responsible for manufacturing under the management of the manufacturer.

• Other packaging machines

1. It is an environmentally friendly cushioning material. The composition of the film is carbon and hydrogen, so there is no generation of harmful substances. 2. The cost is one-third that of expanded polystyrene. Compared to conventional cushioning materials, the running costs are very low. *Costs may vary depending on usage. Please request a detailed running cost comparison. 3. It enables waste reduction. It can be compactly processed by being easily crushed and clean, which is a benefit for the customers who receive it. 4. It requires very little storage space. You can produce cushioning material only when needed, so there is no need to stock bulky cushioning materials. From one roll of film (200mm width x 500m), 290 times the amount of cushioning material can be produced. *Refer to the cost comparison of Air Ready.

• Other packaging machines

○ This is a UV integrative light meter that enables absolute light quantity management (mV/cm²) in the ultraviolet to vacuum ultraviolet range. ○ The sensor head is interchangeable, allowing for light quantity management at three wavelengths (172 nm, 185 nm, and 254 nm). ○ It adopts a "filterless method" that minimizes DUV light degradation, directly detecting specific ultraviolet light without using filters or similar devices.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Equipped with a measurement angle of 20 degrees suitable for measuring surfaces with a gloss level exceeding 70 at measurement angles of 60 degrees and 60 degrees. ●Improved operability compared to conventional products (STMS-723). ●Calibration is automatically performed sequentially for zero and span by simply pressing the SPAN button.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Simply align the light intake section of the measuring device (on the back of the main unit) with the light source, and it will immediately display the digital reading. ●It is very convenient for measuring the radiation amount of ultraviolet generation equipment and the transmission amount.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

●Sleek and smart form ●Sensor is a separate type

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

The sensor unit and the main body are separated, allowing for measurements to be taken at the optimal position.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● Equipped with a hold function to fix the displayed value ● Displays the measured maximum and minimum values

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

● The combination of aperture and shutter speed is easily recognizable at a glance. ● By using the included shoe mount plate, it can be permanently attached to the camera's shoe.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

It is a compact and lightweight size that is convenient for carrying.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

It is optimal for fields such as coatings, textiles and dyeing, rubber and plastics, agriculture, forestry and fisheries, food, housing, ceramics, and medical and academic fields. By reducing color variation, consistent color management is possible not only within the company but also with business partners.

• Spectroscopic Analysis Equipment
• Other environmental analysis equipment

Simple micro hardness tester for thin sheet hardness.

• Other measurement, recording and measuring instruments

Although not specified in the standards, the hardness of materials such as soft rubber and foam sponge can be measured using the manufacturer's unique standards.

• Other measurement, recording and measuring instruments

It is a durometer (rubber and plastic hardness tester) that quantifies and expresses the degree of hardness of soft materials such as rubber, indicating whether they are hard or soft.

• Other measurement, recording and measuring instruments

It is a durometer (rubber and plastic hardness tester) that quantifies and expresses the degree of hardness of soft materials like rubber, indicating whether they are hard or soft.

• Other measurement, recording and measuring instruments

It is a durometer (rubber and plastic hardness tester) that quantifies and expresses the degree of hardness of soft materials like rubber, indicating whether they are hard or soft.

• Other measurement, recording and measuring instruments

It is a durometer (rubber and plastic hardness tester) that quantifies and expresses the degree of hardness of soft materials such as rubber, indicating whether they are hard or soft.

• Other measurement, recording and measuring instruments

●This is a durometer (rubber and plastic hardness tester) that quantifies and expresses the hardness level of soft materials such as rubber, indicating whether they are hard or soft. ●Compliant with JIS K 6253 ●This durometer complies with JIS K 6253 (new JIS). It consists of three types: Type A for medium hardness, Type D for high hardness, and Type E for low hardness. The central Type A tends to show values that are 1 to 2 points higher compared to the old JIS A-type hardness tester. Type D is suitable for hard rubber with a measurement value of 90 or above using Type A, while Type E is suitable for soft rubber with a measurement value of 20 or below using Type A. Additionally, Type A's MD15S-A719NT is specified in JIS A 1108 "Method for Compression Testing of Concrete" for the unbonded capping test. Furthermore, Type E is referred to as Type AO durometer in ISO 7619.

• Other measurement, recording and measuring instruments

This is an automatic rubber hardness measurement system that conducts measurements at the operation speed, measurement mass, and pressure surface dimensions specified in IS K 6253 "Vulcanized Rubber and Thermoplastic Rubber - Method for Determining Hardness."

• Other measurement, recording and measuring instruments

■Manual stand for hardness measurement (with speed controller) ●The descent speed adjustment unit employs a highly reliable speed controller. ●Equipped with an alignment unit that achieves high adhesion between the durometer's indenter (measuring probe) and the sample.

• Other measurement, recording and measuring instruments

When measuring hardness with a durometer using a hand-held method, factors such as individual differences can lead to variations in the measurement values. Therefore, the measurement stand, which has been commercialized as a more stable and reproducible measurement method, is specified by JIS and ISO standards.

• Other measurement, recording and measuring instruments

It is a hardness tester that quantifies and expresses the degree of hardness, whether hard or soft, of soft materials such as rubber.

• Other measurement, recording and measuring instruments

It is a testing machine that quantifies the hardness and texture of food, such as crushing, cutting, and breaking, allowing for data management.

• Other measurement, recording and measuring instruments

●Tip sizes: 3, 6, 8, 11mm ●Interface (RS-232C/USB) ●Peak hold ●0 to 5,000g measurement ●Low battery indication

• Other measurement, recording and measuring instruments

This is a hardness tester that measures the hardness of rubber and plastic. It complies with JIS and ISO standards.

• Other measurement, recording and measuring instruments

This is an economy-type Rockwell hardness tester. We offer five models in both digital and analog display types.

• Other measurement, recording and measuring instruments