シロ産業 List of Products and Services

The Vickers hardness testing machine can be widely used for various metal materials, small heat-treated parts, and is also suitable for special tests such as case hardening layer hardness, maximum hardness of welds, high-temperature hardness, and the fracture toughness of ceramics.

• Other measurement, recording and measuring instruments

Quality control starts with the materials, and the hardness testing machine delivers results.

• Other measurement, recording and measuring instruments

It's pocket-sized and can be carried anywhere.

• Other measurement, recording and measuring instruments

In the conventional "sound hitting method" (a method where the roll surface is tapped and the sound is heard), there was a heavy reliance on the inspector's intuition, making it impossible to manage quality quantitatively. The paper film winding hardness tester can be easily operated even by those without measurement experience, yielding accurate inspection results. The inspection results are quantified based on a unique principle, aiding in quality management.

• Other measurement, recording and measuring instruments

● The adoption of a new type of motor has significantly improved the deviation in lifting speed. ● A printer with built-in calculations is included.

• Other measurement, recording and measuring instruments

● Automatic recognition of test direction is possible. (360°) ● Average value setting is possible.

• Other measurement, recording and measuring instruments

Place the sample on the sample stage, and as you turn the handle to gradually lower the pressure attachment, the dial indicator moves in conjunction, showing the resistance of the sample.

• Other measurement, recording and measuring instruments

●Can be easily used even in dark factories. ●Complies with ASTM E-10. ●There are two types of reading: 0.01mm and 0.05mm. ●Very compact and convenient to carry. ●Can be used continuously for 200 hours. ●M1458F-562001H has very small reading errors due to the movement of the scale.

• Other measurement, recording and measuring instruments

This is a hardness tester that measures the resistance force that appears internally when an object is subjected to external forces, rather than measuring load. The measurement range is from 10N to 100N. It determines pass or fail with comparator judgment display. It has a memory function that can store 1000 measurement data points. It uses USB as an interface, making it easy to connect with a computer.

• Other measurement, recording and measuring instruments

This is a hardness tester that measures the resistance force that appears internally when an object is subjected to external forces, rather than measuring load. The measurement range is from 10N to 100N. It determines pass or fail using comparator judgment display. It has a memory function that can store 1000 measurement data points. It adopts USB as an interface, making it easy to connect with a computer.

• Other measurement, recording and measuring instruments

Zero point adjustment, pointer type

• Other measurement, recording and measuring instruments

Hardness measurement is an important item for the characterization of various rubber, elastomer, and plastic products, and durometers (spring-type rubber hardness testers) are widely used as instruments to obtain that data.

• Other measurement, recording and measuring instruments

This is the latest mini hardness tester characterized by high precision, a wide measurement range, and ease of operation. It is suitable for measuring the hardness of ordinary metals and is widely applicable in many industrial sectors such as petrochemical machinery and the power industry.

• Other measurement, recording and measuring instruments

Compact and portable pocket size, with a single button to quickly complete any tedious adjustments. You can measure %MVC immediately after turning it on.

• Other measurement, recording and measuring instruments

The handheld hardness tester is completely different from conventional hardness testing machines; instead of measuring the size of the indentation on the material using a microscope, it applies a diamond indenter with a constant load to the material surface and measures hardness by providing ultrasonic longitudinal vibrations.

• Other measurement, recording and measuring instruments

The measurement time (load holding) can be set arbitrarily, enabling the measurement of soft workpieces that could not be measured with conventional hardness standards. By adopting a voice coil motor in the load generation mechanism, load settings can be adjusted according to the target workpiece. (※1) Since it is possible to set a low load starting from 0.002N, it allows for the measurement of soft workpieces that could not be measured conventionally. The stress relaxation time of the workpiece can be determined. Additionally, since the measurement time can also be set arbitrarily, it is possible to quantify the softness of gel-like materials that have no rebound force.

• Other measurement, recording and measuring instruments

Hardness tester

• Other measurement, recording and measuring instruments

Schmidt test hammer for normal and high-strength concrete

• Other measurement, recording and measuring instruments

Anyone can easily conduct hardness tests with just one touch, making it widely applicable for various test subjects on-site. ● Abundant Detector Variations In addition to the standard universal detector (Type D), we offer a wide range of specialized detectors (sold separately) for various applications. For bearings and gears, we have the D+15 type. For narrow surfaces such as the bottoms of small gears and weld seams, we provide the DL type.

• Other measurement, recording and measuring instruments

This is a hardness meter that is convenient for measuring the hardness of tofu. Comes with an adapter (disk).

• Other measurement, recording and measuring instruments

Rubber and plastic hardness tester

• Other measurement, recording and measuring instruments

Recently, the trend towards larger machines and structures has become prominent, and consequently, the need for simple and rapid inspection methods for large components has increased. This device is designed to be as portable as possible while maintaining sufficient accuracy without the typical decrease in precision that often accompanies miniaturization. Additionally, it takes into account improved stability during handheld measurements. Combined with ease of operation and lightweight design, it demonstrates its true value in the field.

• Other measurement, recording and measuring instruments

● Not only for test specimens, but also for any products or materials other than hollow thin-walled pipes, testing can be easily conducted regardless of size. ● The testing method is as follows: (1) Place the 5mm diameter steel ball at the tip of this device perpendicular to the surface of the test material, (2) Press the rounded part of this device with your hand, (3) Due to the internal mechanism, a constant force is applied to the steel ball, creating an indentation in the test material. (4) Measure the diameter of the indentation with the attached microscope and determine the Brinell hardness from the hardness table. ● In the case of steel, there is a nearly constant relationship between Brinell hardness and tensile strength, so tensile strength can also be estimated approximately using a separate table. * Manufactured according to the manufacturer's internal standards. * Not compliant with JIS. * The standard "hardness table" is for steel. * There is also an "aluminum hardness table," but it serves as a reference based on the manufacturer's experimental values.

• Other measurement, recording and measuring instruments

● Compact, lightweight, and easy to operate. It has no structural failures. ● A portable type that is convenient to carry, capable of measuring any size or shape of workpiece (sample). ● The hardness reading is Shore hardness. It can be quickly converted to Rockwell, Brinell, and Vickers values using a hardness conversion table. * Items with a mass of 4 kg or less, hollow (thin-walled) items, and thin plates cannot be measured. ● Differentiation based on application The SPS1 is ideal for measuring the hardness of flat and curved surfaces (convex surfaces). It is convenient for cases where measurement of special shapes, such as the tooth bottom of gears, is not required. The SPS2 has a contact part with the workpiece that is shaped with sharp angles. Therefore, it can measure the hardness of gear tooth bottoms (module 3 or higher) and special recesses. Additionally, by attaching a cap for flat measurements, it can also measure the hardness of flat surfaces and both concave and convex surfaces.

• Other measurement, recording and measuring instruments

This device is a portable hardness tester capable of measuring the hardness of various samples with cutting-edge high precision, a wide measurement range, and easy operation. It is ideal for hardness testing under various conditions and environments.

• Other measurement, recording and measuring instruments

A flat-type device that can precisely measure soft soil, primarily used for measuring the mud of rice fields and the sediment of lakes and ponds.

• Other measurement, recording and measuring instruments

● Custom corrections can be incorporated by the user. ● Automatic recognition of test directions is possible. (360°)

• Other measurement, recording and measuring instruments

Anyone can easily perform hardness tests with just one touch, making it widely applicable to various testing subjects on-site. ■ Abundant Variety of Detectors In addition to the standard universal detector (Type D), we offer a wide range of specialized detectors (sold separately) that can accommodate various applications. For testing the hardness of pipe inner walls that could not be tested with the Type D, we have the DC type. For bearings and gears, we offer the D+15 type. For narrow surfaces such as the bottom of small gears and corners of welds, we have the DL type available.

• Other measurement, recording and measuring instruments

●Principle: Ultrasonic type ●Applicable materials: Metal, resin, ceramics ●Conversion scale: Converts Vickers (HV) values to HRC, HRB, HB, etc.

• Other measurement, recording and measuring instruments

The Shore hardness tester generally belongs to what is called a rebound hardness tester, which measures hardness by dropping a diamond hammer weighing approximately 36g from a height of about 19mm and measuring the rebound height of the hammer. The uniformity of the weight of the diamond hammer is high at ±1g, and it achieves high precision with a drop height of 19mm ±0.3. Additionally, by maintaining high precision, it features high compatibility of parts, making it easy to replace the diamond hammer. It also adopts a unique mechanism that allows for easy adjustments of the machine, making maintenance straightforward.

• Other measurement, recording and measuring instruments

The adoption of a new type of motor has significantly improved the deviation in lifting speed. Customers can perform calibration using the optional calibration set. It can measure up to 40 kg (392 N), making it possible to measure very hard samples. A printer with calculation capabilities is built-in. Users can switch between Kgf and N display.

• Other measurement, recording and measuring instruments

The samples to be measured for hardness vary from soft sponges to hard plastics. Additionally, the measurement locations on the samples are diverse, including flat surfaces, holes, and the bottoms of grooves.

• Other measurement, recording and measuring instruments

Place the sample on the sample stage, and as you turn the handle to gradually lower the pressure attachment, the dial indicator will rotate in conjunction with the resistance of the sample. At this time, the dial indicator will rotate while pressing against the auxiliary indicator (red).

• Other measurement, recording and measuring instruments

This is a new evaluation system for material strength in micro-regions that cannot be addressed by conventional testing machines, including semiconductors, LSI, ceramics, hard disks, vapor-deposited films, and coated films. It can also be used for hardness evaluation of plastics and rubber.

• Other measurement, recording and measuring instruments

L-shaped seals for small boxes and cosmetic boxes can be easily and reliably applied. The tape seal is smoothly applied in a designated position. It can also be used for small packages.

• Shrink Wrapping Machine

Power: 3-phase AC 200V 50/60Hz 0.37kW Capacity: Maximum 1,200 cases per hour Tape width: 36mm to 50mm

• Shrink Wrapping Machine

●Manual operation for welding & clamping ●Welding time is determined by the operator's judgment.

• Shrink Wrapping Machine

● Compatible with various materials for food packs By adopting a vertical vibrator, the heating efficiency is improved, allowing for reliable point sealing even with a wide range of food pack materials. It can also seal different materials. ● No fatigue even during long hours of work The lightweight and easy-to-grip resin handle ensures that you won't get tired even during extended work sessions. ● Stable finishing accuracy The oscillation time can be set with a timer, ensuring stable finishing accuracy for seals. It performs point sealing with small dimensions and high peel strength. ● Ready to use immediately It generates heat through vibration only during the sealing process, eliminating the need for preheating time. You can start using it immediately after turning on the switch.

• Shrink Wrapping Machine

● A tape dispenser with a convenient tab feature. ● Easy to stick and easy to peel off, significantly improving work efficiency.

• Shrink Wrapping Machine

● Non-adhesive tape can also be cut. ● Can be cut from as short as 5mm, bobbin-free. ● Achieves high power, high speed, and long life. ● Cuts not only tape but also film, tubes, and aluminum foil. ● Can accommodate tapes of all sizes without a bobbin. ● Easily cuts tough tapes such as filament, strong, Kapton, acetate, glass cloth, and double-sided tape. ● Powerful performance in a compact body compatible with cell systems.

• Shrink Wrapping Machine

● The tedious tape cutting process can be done by simply pressing a switch, arranging the tape halfway around the turntable. ● The tape width can be used from 3mm to 25mm. ● The cutting dimensions of the tape can be freely adjusted from 13mm to 60mm. One machine can cut many types of tape. ● It has a straight blade.

• Shrink Wrapping Machine

We will conduct gas piping airtightness and leakage tests. ● With temperature correction function ● Built-in printer ● Transferable to a computer ● 400 data registrations

• Other environmental analysis equipment

For measures to prevent global warming caused by refrigerant gas leaks.

• Other environmental analysis equipment

The detection output is triggered at a hydrogen gas concentration of 1.5% in the detection area, and for safety reasons, the power supply will be turned off, but the detection output will be maintained. Other combustible gases can also be detected.

• Other environmental analysis equipment

- Intrinsically safe explosion-proof structure - Can be used as explosion-proof equipment even in hydrogen and acetylene atmospheres

• Other environmental analysis equipment