シロ産業 List of Products and Services

■Features In addition to VOC measurement, this is a versatile type that allows for the measurement of ammonia, ozone, carbon monoxide, and more by exchanging sensors. Various sensors are pre-calibrated, and sensor replacement can be done with a single touch.

• Other environmental analysis equipment

While maintaining the well-received concept of "a small, lightweight, compact body that can be observed anywhere without being location-specific," we have upgraded the basic performance. In addition to its stylish appearance, we have improved operability with a rubber grip on the side. We have also added a scale display and switching function for "grid" and "cross," which is convenient for simple measurements. Furthermore, we have made it possible to set a white balance that accommodates various modes and conditions, an EV shift that allows brightness correction in ±2.0 increments, and an LED cover that reduces halation, enabling clearer and higher-quality imaging of subjects. Additionally, it now supports video recording. Of course, the captured data can be saved to an SD card and linked to external devices such as computers and printers. It has evolved into a high-performance digital microscope suitable for professional use, not only for verification purposes but also for recording purposes.

• Other microscopes

■Features The monocular is an intelligent device that excels in both design and practicality. The metal body, which fits comfortably in the hand, not only enhances the joy of holding it but also boasts excellent operability. The impressive sliding focus lever reflects Minox's commitment to craftsmanship.

• Other microscopes

There are five types available depending on the pressure measurement range and recording period.

• Pressure

■Features ●Equipped with four types of measurement functions (K-type thermocouple thermometer, temperature and humidity meter, illuminance meter, anemometer).

• Other measurement, recording and measuring instruments

■Features ●Measurement temperature range: -50 to 70℃ ●High accuracy: ±0.5℃ ●Upper and lower limit alarm ●Maximum/Minimum/Hold function ●Convenient table stand with magnet ●RoHS compliant, CE compliant ●EN13485 compliant

• Thermometer

Digital temperature display using large LED with a character height of approximately 100mm.

• Thermometer

■Features Easy data recording with SD card. Temperature T1-T2 calculation function, MAX/MIN display, data hold, backlight, and auto power-off function included. Compatible with K thermocouples and platinum resistance temperature sensors.

• Thermometer

● The device has a built-in temperature sensor, allowing simultaneous monitoring of external temperature and internal temperature (measurement location) on two channels. ● The temperature data logger is installed outside the liquid nitrogen freezing storage container or freezer, while the temperature sensor probe is placed inside the liquid nitrogen freezing storage container. ● The temperature inside the container can always be viewed on the LCD screen of the temperature data logger (large backlit LED display). ● The device has 8 keys, allowing easy key operation to check the maximum, minimum, average, and current temperatures in real-time during measurement. ● The measurement program and temperature data can be read by connecting the logger to a computer with analysis software installed via a USB cable. No special reading device is required. ● The Japanese version software compatible with Windows 7/8/10 easily displays temperature data in both numerical tables and graphs. ● Measurement data can also be displayed in Excel.

• Thermometer

■Features The MI1T-SCK-PBM simultaneously measures temperature at two locations: an internal temperature sensor and an external probe temperature sensor, with up to 1,365 memories per channel. For example, it is possible to monitor the center temperature of a product using the probe temperature sensor while simultaneously monitoring the storage temperature of the product with the internal temperature sensor. The battery life is long (approximately 10 years or 3 million measurements), so there is no need to worry about the hassle of replacement. The measurement program and temperature data reading are done by inserting the main unit into a reader and connecting it via USB to a computer with the analysis software installed. The measured data is displayed in numerical tables and graphs. It is also possible to display the measurement data in Excel.

• Thermometer

■Features To read the measurement program and temperature data, insert the main unit into the reader and connect it via USB to a computer with the analysis software installed. The measured data is displayed in numerical tables and graphs. It is also possible to display the measurement data in Excel.

• Thermometer

■Features This is a multifunctional illuminance meter that can utilize features such as a backlight function that allows visibility in dark places, a measurement hold function, minimum or maximum illuminance measurement modes, light pulse peak minimum or maximum measurement modes, and illuminance error measurement modes. It comes packaged with the main unit, sensor, and battery in a hard case.

• Other measurement, recording and measuring instruments

■Features Equipped with a peak hold function, it can memorize the maximum and minimum illuminance that changes in units of 1/100,000 seconds. By using this function, it is possible to measure the illuminance of light pulses that change in very short time intervals. Additionally, it has a maximum and minimum illuminance memory that changes in units of 0.77 seconds, hold function, illuminance change value measurement, and a backlight function that allows visibility of values even in dark places, making it a multifunctional illuminance meter.

• Other measurement, recording and measuring instruments

● The wetted parts are made of SUS304/303. ● It is suitable for measuring the flow characteristics of non-Newtonian fluids. ● You can utilize the know-how accumulated through extensive experience.

• Viscometer

■Features The non-contact temperature can be adjusted to match the measured object with an emissivity range of 0.01 to 1.00. The distance coefficient is 11:1 to ensure accurate measurements of distant objects. The MI1RA-TEM can display the maximum temperature, minimum temperature, deviation between maximum and minimum temperatures, and average temperature during measurement. It also has a function to sound an alarm when the specified maximum and minimum temperatures are reached. In infrared radiation thermometer mode, the device will automatically stop after 60 seconds of inactivity, but it also includes a lock mode to disable the automatic stop for continuous surface temperature measurements. For the food industry, the MI1RA-TEM can be delivered as a set with a piercing temperature sensor and probe sterilization wipes (70 sheets) in a hard case.

• Radiation thermometer

● Dual display of kilograms and newtons is possible ● Bright and easy-to-read red LED display (brightness can be adjusted in 5 levels) ● Basic operations such as tare can be performed via remote control

• Scale

K thermocouple Auto power off Data hold Burnout indication

• Thermometer

■Easy-to-use automatic mode ● The alarm automatically activates when the heat stroke index reaches 28°C or 31°C. ● Displays the danger level rank of the heat stroke index (4 ranks: Caution, Warning, Severe Warning, Danger) ■Setting mode where alarm values can be changed ● Allows arbitrary setting of the heat stroke index alarm value (setting range: 21°C to 60°C) ● Timer function to manage work and break times (setting range: 1 minute to 4 hours)

• Other environmental analysis equipment

■Features ●Easy Operation Simply point the sensor towards the direction you want to measure and press the switch for 2 to 3 seconds to easily measure the distance to the target. *Measurement may not be possible if the target is sludge or seaweed.

• Distance measuring device

● The real-time oxygen concentration can be monitored on a large LCD. ● Compact and easy to hold design. There is a soft case available as an option. ● Alarm concentration settings can be configured in two stages, with options for upper and lower limits. ● The alarm features an easily identifiable electronic buzzer sound. ● Two red LEDs indicate the alarm. ● You can choose between alarm hold or automatic reset. ● Using external alarm output, control of rotating lights and solenoid valves is possible. ● An analog output of 0-1V can be used to extract oxygen concentration externally.

• Other environmental analysis equipment

■Features ●10x to 40x zoom lens The magnification can be continuously adjusted using the side dial.

• Other microscopes

Low-cost binocular stereo microscope with upper and lower LED lighting.

• Other microscopes

■Features ●Fully automatic operating environment All complex operations of the X-ray equipment, from initial adjustments (calibration) to inspection and power off, are performed automatically. ●High-precision sensor Using a high-precision X-ray line sensor, it can capture foreign objects as small as 300μm (micrometers). (Note: The standard is based on SUS balls, and depending on the material, clear images may not be obtained.) ●Ultra-fast processor Equipped with a 64-bit ultra-fast CPU (Core i7) and a large 8GB memory to process large-capacity X-ray images at high speed, achieving more than double the processing capability (compared to our company). Specifications may change without notice for performance improvement. ●Dual monitor Standard dual monitors allow for simultaneous inspection while displaying a total of six screens, including different screen settings and point magnification. ●Full-color display The full-color inspection screen makes it easier to detect foreign objects. ●Variable speed shooting Depending on the target product, shooting can be selected at three speed levels: high speed, standard, and low speed (high precision).

• X-ray inspection equipment

■Installation example of the illuminance transmitter MC8D2021T series for monitoring the intensity of lighting. Generally, for this type of application, the MC8D2021T series should be installed on the ceiling close to the area where illuminance monitoring is needed. If necessary, measure the installation position of the transmitter with a reference illuminance meter and use this as a basis to fine-tune the output values of the MC8D2021T series.

• Other measurement, recording and measuring instruments

■Features ● Newly developed MLSS detector with reference light A high-performance MLSS detector equipped with a reference light sensor that constantly monitors the brightness of the LED, automatically compensating for light fluctuations due to LED degradation and temperature changes, which can lead to measurement errors. ● High-sensitivity MLSS detector for near-infrared light that is unaffected by external light ● Shock-absorbing rubber for the detector ● Selectable measurement modes for different applications Based on 30 years of accumulated technology and rich data, measurement modes that are linearized for specific applications can be selected, and on-site zero and span four-point calibration is also possible. Examples: - Dairy and food sludge mode - Food sludge mode - Combined sewage treatment tank mode - Sewage treatment sludge mode - Excreta treatment sludge mode - Sedimentation concentration sludge mode ● Ergonomic design with anti-slip structure ● Measurement range: 0 to 20000 mg/L, with a maximum display of up to 30000 mg/L ● Waterproof according to IP67 standards ● Economy type, popular model, high-sensitivity MLSS meter dedicated to MLSS measurement. While it does not have a water depth measurement function, it offers high performance equivalent to the SS-5Z at an economical price.

• Water quality testing

● Newly developed MLSS detector with reference light Equipped with a reference light sensor that constantly monitors the brightness of the LED, this high-performance MLSS detector automatically corrects measurement errors due to variations in light intensity caused by LED degradation or temperature changes. ● Near-infrared high-sensitivity MLSS detector unaffected by external light ● Shock-absorbing rubber for the detector ● Simultaneous measurement of MLSS and water depth (interface) with a single unit MLSS and water depth (interface) are displayed simultaneously, and near the set sludge concentration, the display's "ALM" and "mg/l" indicators blink to signal the sludge interface. ● Selectable measurement modes for different applications Based on 30 years of accumulated technology and rich data, measurement modes that are linearized for specific applications can be selected, and zero and span four-point calibration can also be performed on-site. ● Examples: - Dairy and food sludge mode - Food sludge mode - Combined sewage treatment tank mode - Sewage treatment sludge mode - Excreta treatment sludge mode - Settled concentrated sludge mode

• Water quality testing

■mV Mode In mV mode, it is possible to measure the electrode's activation force and determine its quality. ■Handling of Ion Electrodes When measuring the concentration of sample water using chloride ion electrodes or fluoride ion electrodes, it is necessary to add an ionic strength adjuster during calibration and measurement to ensure that the measurement is not affected by the ionic activity strength or pH of the sample water.

• Water quality testing

■Overview The fluoride ion electrode uses a single crystal of lanthanum fluoride (LaF3) as the sensing membrane to measure the concentration of free fluoride ions in aqueous solutions. It cannot measure the total fluoride concentration of complexed fluoride compounds. It is used in fields such as process control in semiconductor manufacturing plants, glass factories, and fluoropolymer manufacturing plants, as well as in water quality management for factory wastewater and drinking water. ■Fluoride Ion Electrode with Automatic Temperature Compensation The semiconductor temperature element automatically corrects errors due to temperature changes. ■High-Performance Fluoride Ion Electrode A fluoride ion electrode capable of measuring from low to high concentrations. It can measure with a linear characteristic from 0.1 to 1999 mg/L. As with the chloride ion electrode, it is necessary to add an ionic strength adjusting agent (ISAB) during calibration and measurement to maintain constant pH and ionic strength. ■mV Mode In mV mode, it is possible to measure the electrode's activation force and determine its condition. ■Automatic Measurement Range Switching Function In the measurement range of 100 to 2000 mg/L, it automatically switches to a resolution of 1 mg/L, and below 99.9 mg/L, it switches to a resolution of 0.1 mg/L.

• Water quality testing

■Waterproof structure (equivalent to IP67) ● Waterproof / drip-proof plug / connector, waterproof gasket adopted It can be safely used even in outdoor conditions during rain or in case of emergencies, as the instrument is waterproof. ■Backlight function ● With a backlight function, it can be read in dark places. During measurement mode, press the backlight switch → LED lights up → automatically turns off after 3 seconds. ■Measurement value memory function ● Pressing the MEMO. key will store the measurement value. You can recall the memory data using the ▲▼ keys. It can store and recall up to 30 measurement values.

• Water quality testing

●Low residual current galvanic type ●Cartridge-type diaphragm replacement unit ●Water quality meter with anti-slip and drop prevention features, IP65 compliant waterproof structure ●Standard included dirt-resistant vinyl cover ●Seawater/freshwater switching measurement function ●With backlight function ●With memory function

• Water quality testing

● Lightweight design weighing approximately 11 kg, emphasizing portability. ● 2-way power supply (batteries or AC adapter) that can be used anywhere. * The AC adapter is an optional item.

• Scale

● Large weighing platform of 1100mm × 1100mm Cable length to the display unit: approximately 5m, pallet material: polypropylene (PP), weighing frame material: steel (SS400) ● Sorting weighing function ● Cutting weighing function For weighing bulk bags, etc. ● Counting function Ideal for managing the count of large parts. Equipped with digital tare function. ● Memory function Four types of memory convenient for counting. ● Display stand included as standard, built-in printer available separately.

• Scale

●Memory Function Four types of memory convenient for counting devices. ●Standard display stand included, with an optional built-in printer available for purchase.

• Scale

● Handheld digital torque gauge that can be used with an integrated display. When the display is separated, it becomes a stationary digital torque gauge. By separating the display and using a table attachment (sold separately), it transforms into a professional micro digital torque meter. ● Available in four series, compatible with 0.1 to 5 cN·m (1 to 50 mN·m). ● Ideal for torque measurement of electronic components such as small motors, encoders, and potentiometers. ● Accuracy ±2% + 1 digit, CE marked. Compliant with RoHS directive. ● Can store 999 data points. Equipped with USB output. ● Measurement can be performed using an external AC power supply via a USB power adapter (sold separately: MD31A-5T) and connection cable (sold separately: MD31384T). ● When connected to a computer, it can draw power from the computer for measurement. Data communication is also possible. ● Data acquisition software "Excel Receiver" can be downloaded for free from the website, allowing for data collection, analysis, graphing, and printing. * "Excel Receiver" is a data input tool. Please prepare a PC with Excel installed separately.

• Torque Meter

The digital viscometer MG1C-10 can measure a wide viscosity range from 1 mPa·s to 800 Pa·s. (The low viscosity CC type is a dedicated model.) ● It uses a coaxial double cylinder rotational viscometer and a spiral pump structure to measure highly thixotropic materials with good reproducibility, allowing for continuous measurement of viscous substances that change viscosity due to stirring. (Shear rate and shear time are constant.) ● High-precision measurements can be performed for LED materials and general electronic materials. ● By exchanging three types of rotors (A, B, C), a wide measurement range can be achieved. ● Automatic measurement and data analysis can be performed with a dedicated program via USB communication. (Optional) ● A special specification AA type that supports up to 2000 Pa·s is also available in the lineup.

• Viscometer

■Fast Measures in just 2 seconds, 1/5 the speed of thermistor thermometers ■Clean Washable structure that can be rinsed with water ■Clear Large LCD display that is easy to read ■Durable Resistant to drops and not easily broken Functions normally after falling from a height of 1 meter ■Long-lasting Product lifespan of over 2 years with 3 hours of use per day (over 2500 hours) *Battery replacement is not possible to maintain waterproof structure. ■Reliable High-quality Japanese manufacturing Issuance of inspection reports and traceability certificates available (sold separately)

• Thermometer

● The handheld refractometer allows anyone to easily measure sugar content by simply placing juice or other samples on the sample plate and pressing the measurement button. ● The handheld refractometer has a wide measurement range of 0-85% and achieves high accuracy with a precision of ±0.2%. It covers almost all food samples with this one device. Its compact design allows for a firm grip, making it easy to operate with one hand, whether left or right. ● The handheld refractometer features a newly designed measurement section that is resistant to external light, allowing measurements to be taken outdoors in environments where direct sunlight does not hit, such as under the shade of fruit trees or eaves of work sheds. ● The handheld refractometer is waterproof (IP65). After measurement, cleaning is simple—just rinse the sample with tap water to easily clean it. After that, just wipe off any moisture and store it, and you can use it for a long time. Additionally, the handheld refractometer floats on water, so you can be assured if it falls into the water.

• Other measurement, recording and measuring instruments

Weighing only 150g, it can brightly capture targets and approach up to 35cm. It is completely waterproof and filled with argon gas, ensuring it won't fog up.

• Optical microscope

The Becquerel meter, certified by ISO 9001, is designed so that even those without specialized knowledge can easily check for gamma radiation contamination in various foods, vegetables, water, milk, fish, meat, soil, powders, and solid materials. It uses cutting-edge technology with CsI scintillators and silicon photodiodes, allowing measurement results to be obtained in a few minutes to 45 minutes. For example, if a vegetable contains 3000 Bq (Becquerel) of radioactive material per kg, good test results can be obtained in about 10 minutes. The Becquerel meter can perform zero calibration for background radiation in the atmosphere, ensuring high-accuracy measurements. Gamma radiation activity measurement is displayed in Bq/L or Bq/kg, with a measurement error of ±10% or less (for cesium-137), covering a wide range from approximately 25 Bq/kg to 10 MBq/kg.

• Radiation detector

●Large lenses that are easy to see with both eyes ●Includes a protective cover for the lens ●White glass lens that does not change the color of what you see ●Uses an inverter system that eliminates flickering when the switch is turned on

• Optical microscope

■Features This is a temperature and humidity transmitter equipped with a data logger function. In addition to analog output of current or voltage, it also offers RS232C/RS485 serial communication (available on all models) and control ON/OFF output (only for models ending in -R). A major feature is the compatibility of the probes, allowing users to replace the probes with spare ones without interrupting the process for long periods if a probe replacement is necessary. The temperature and humidity probes are common to both series and consist of three types: a rear probe (S.TO) directly connected to the main housing, a downward probe (S.TV), and a separated probe (S.TC) that connects to the main housing via cables (2m/5m/10m). The rear probe (S.TO) and downward probe (S.TV) are made of stainless steel AISI304, while the separated probe (S.TC) is made of AISI304 or 'POCAN' (plastic). The temperature and humidity probes are calibrated before shipment, so no adjustment is needed before use. The probes are equipped with a SICRAM2 module, which stores the calibration data for each probe and enables probe compatibility.

• Thermo-hygrometer

■Features This is a temperature and humidity transmitter equipped with a data logger function. In addition to analog output of current or voltage, it also offers RS232C/RS485 serial communication capabilities (available on all models) and control ON/OFF output (only for models ending in -R). A major feature is the compatibility of the probes, allowing users to replace the probes with spare ones without interrupting the process for long periods if a probe replacement is necessary. The temperature and humidity probes are common to both series and consist of three types: a rear probe (S.TO) directly connected to the main housing, a downward probe (S.TV), and a separated probe (S.TC) that connects to the main housing via cables (2m/5m/10m). The rear probe (S.TO) and downward probe (S.TV) are made of stainless steel AISI304, while the separated probe (S.TC) is made of AISI304 or 'POCAN' (plastic). The temperature and humidity probes are calibrated before shipment, so no adjustment is needed before use. The probes are equipped with a SICRAM2 module, which stores the calibration data for each probe and enables probe compatibility.

• Thermo-hygrometer

■ It can switch between combustible gas and refrigerant gas detection with one unit. By replacing the sensor at the probe tip, it is possible to switch between combustible gas detection and refrigerant gas detection. ● The level is displayed with an LED. ● It can provide audio alerts (with mute function). ● The probe tip lights up according to the gas level. ● It performs automatic zero calibration, eliminating the need for regular calibration. ● It is an automatic suction type.

• Other measurement, recording and measuring instruments
• Odor Testing
• Other inspection equipment and devices

● Large LCD display ● Temperature and humidity readings automatically switch every 14 seconds ● Simple design

• Thermo-hygrometer

● Environmentally friendly solar-powered thermometer ● Large digital display, character height 45mm ● Convenient three mode switching A: Current temperature display B: Alternating display of current temperature and current time C: Alternating display of current temperature, maximum temperature, minimum temperature, and current time

• Thermometer