シロ産業 Product Lineup

Lightweight yet sturdy, suitable for transport, and can be used for multiple purposes. The interior is made of urethane foam, making the inside of the case resistant to scratches and protecting the stored items from impacts.

• container

■Features ●Can be stacked for use. ●Holes are made in the bottom surface to enhance ventilation.

• container

Stable performance with high dust collection efficiency and power.

• Dust collector

High performance & energy-saving compact design

• Dust collector

Stable suction airflow is maintained due to the cyclone effect.

• Industrial Vacuum Cleaners
• Dust collector

Since it is made of urethane leather, it can be easily wiped clean even if it gets dirty.

• Other work tools

●Very compact The machine is very compact despite being able to package long products. There is no trouble with installation space. ●No restrictions on product length. Adopting an edge seal method for the top seal. Continuous sealing while unwinding the film is possible. It accommodates a wide range of products from multi-packs of cans and bottles to large items like building materials. ●Easy size change Width and height can be easily changed with a handle operation. If individual product data is registered on the touch panel, unnecessary work is not required.

• Shrink Wrapping Machine

■Stacking is OK *The six-wheeled version cannot be stacked. ■With multi-layer stacking, storage space is sufficient for one unit (anti-shift brackets). ■Excellent maneuverability and straight-line stability are perfectly combined.

• palette

■Features ● Equipped with an automatic shaking device as standard, enhancing dust collection efficiency ● Collects coarse dust through cyclone effect, resulting in less clogging ● Both filter area and processing air volume allow for ample collection of high-concentration, large amounts of dust ■High-Performance Cyclone Separates and recovers coarse dust using centrifugal force. ■Automatic Shaking Device as Standard Equipment The shaking motor vibrates the filter, efficiently dislodging dust adhered to the inner surface of the filter.

• Dust collector

■Specifications Size (mm) (W)×(D)×(H) 482×602×935

• others

■Specifications Size (mm) (W) × (D) × (H) 570 × 795 × 955

• Other conveying machines

■Features ●Stable voltage due to the adoption of AVR (Automatic Voltage Regulator)! ●Large fuel tank for extended operation time! ●Equipped with an environmentally friendly new engine! ●Ultra-low noise and low noise, designated by the Ministry of Land, Infrastructure, Transport and Tourism! ●Standard equipment includes a voltmeter, fuel gauge, and oil sensor! ●Standard equipment includes DC output (outlet) for battery charging!

• Generators and transmission motors

■Features ● High-quality output usable for computers with low noise and fuel efficiency By utilizing inverter control, it achieves high-quality output at home power supply levels with a frequency fluctuation rate of less than 1% and a waveform distortion rate of less than 2.5%, allowing for safe use in various situations as a power source for precision machinery and computers. ● Tough output with safety design Equipped with the OHC EX engine, known for its "toughness," it integrates safety features such as output control functions, electronic circuit breakers, and oil sensors into the inverter unit, achieving robust output and high safety.

• Generators and transmission motors

■The middle shelf can be adjusted in 50mm increments. ■The base is a welded integrated type, making it very sturdy. ■With resin adjusters Screw diameter: M12×P1.75 ■It is possible to use the shelf all the way to the end of the side (in the width direction).

• Other conveying machines

■Easy to assemble. The shelves can be easily installed and reconfigured by one person, as they only need to be placed on the shelf supports and secured with screws, eliminating the need for two people as in traditional methods. ■Straight-line stability hardware Includes hardware to stop the rotation of the swivel casters. You can choose the installation based on the site and application you will be using. *The color of the hardware is for explanatory purposes. The actual color will be chrome.

• Other conveying machines

■Features ●Reliable portability with a sturdy structure Inside the exterior resin cover, a unique high-rigidity resin frame structure is arranged, allowing for safe use in various situations from home to business. Furthermore, the bottom surface of the frame is made of high-rigidity aluminum material, enhancing durability against potential impacts. ●Significantly improved environmental performance An auto power save function that automatically adjusts the engine speed according to the power consumption of connected electrical devices, a high-efficiency multi-pole magnet outer rotor generator, optimization of the cooling structure, a dedicated large silent muffler, and optimal placement of sound-absorbing materials have all contributed to achieving low noise levels.

• Generators and transmission motors

■ Max mode is convenient for measuring inner diameters! ■ Min mode is convenient for measuring outer diameters in hard-to-see places! ● Useful in situations like this! ⇒ Lathe processing (difficult reading posture for the caliper) ⇒ Measuring deep inside a machining machine (hard to see the display) ⇒ Measuring the width of large grooves Of course, normal measurements are possible when not in Max or Min mode.

• Other measurement, recording and measuring instruments

It keeps white coats, work clothes, hats, and indoor shoes clean with the strong sterilizing and deodorizing power of ozone. High safety is ensured through various mechanisms.

• Sterilizer

■Overview ● Since it does not use a motor, there are no failures. ● It generates a vacuum instantly with a small amount of compressed air. ● Its box shape makes installation easy, allowing it to be set up on various machines. ● The vacuum level is always constant. ● Developed using Breas's unique technology with compressed air, it is an ultra-powerful vacuum generator. ● It has an explosion-proof specification with a compressor air drive system (note: grounding wire, etc. is required). ● There are no rotating parts inside, so there is almost no concern for failure. ● We can also flexibly respond to other specification changes.

• Vacuum Equipment
• Vacuum pump
• Vacuum forming machine

It has excellent gas barrier properties and supports large capacities (1 to 3 liters).

• Packaging Bags

We use gas barrier aluminum foil. (M223P16GA-1000C) We use a film with excellent gas barrier properties. (M223P16GW-1000C)

• Packaging Bags

We will add a new 110mm thick blade with a square edge to accommodate various applications.

• cutter
• Cutter/Scissors

■The legs are marked with scales. *The legs have scales, making adjustments easy. ■The legs are adjustable in length.

• Other conveying machines

Our load capacity display is based on a safety factor of 20%. This cart is designed to minimize scratches on the surface due to powder coating. ■ The type with a floor stopper allows the cart to be fixed in any position. ■ The handle and corner parts are made of polypropylene resin.

• Trolley

■With punching panel The upper three sides of the storage cabinet and the back of the door are equipped with a punching panel, allowing for the organization and storage of tools using hooks, etc. (Tools are not included) The punching panel (side) is adjustable at 50mm pitch.

• Other conveying machines

- Maximum measurement current AC1000A - Tear-drop shape convenient for measuring in complicated wiring - Diameter of the conductor to be measured φ33mm - Multifunctional design with AC/DC voltage and resistance ranges - Minimum resolution 0.01A - Safety design compliant with international safety standard IEC61010-1 CAT. III ■ Method for measuring current Open the tip of the current sensor and clamp only one side of the conductor to be measured, then read the indicated value. Ensure that only one side (one wire) is clamped. ■ Method for measuring voltage Contact the measurement leads with the circuit to be measured and perform the measurement.

• Ammeter

For signal measurement in process instrumentation and building automation.

• Ammeter

The height can be adjusted according to the work. *Our uniform load-bearing capacity is based on a safety factor of 20%. *The gas spring type ranges from H645 to 895 (fixed type) and H700 to 950 (mobile type).

• Other conveying machines

The height can be adjusted to match the work. *Our uniform load capacity display considers a safety factor of 20%. *The gas spring type ranges from H645 to 895 (fixed type) and H700 to 950 (mobile type).

• Other conveying machines

Access to Android apps via wireless communication functionality *Please note that measurements can be made with multiplexing, sharing, and structural grounding, but measurements with standalone grounding are not possible.

• Other measurement, recording and measuring instruments

This product is a measuring instrument capable of checking miswiring of grounded outlets. ● It can determine miswiring of live wires between N-E (Neutral-Earth), which was previously difficult. ● It measures a current (approximately 10 mA) that does not trip a leakage breaker of 30 mA or more, even with N-E miswiring. ● Normal/miswired conditions are indicated by LED (green/red) lamps and a buzzer. ● An LCD display clearly shows the miswiring situation at a glance. ● Voltage measurement (between L-N) and grounding resistance measurement (between N-E). ● The LCD backlight automatically turns on with a light sensor, supporting measurements in dark places. ● The included conversion adapter allows compatibility with 3-prong/2-prong outlets.

• Defect Inspection Equipment
• Other electric meters
• Other electronic measuring instruments

● Uses 60×30 square pipes, offering excellent durability. The bottom plate has been changed from wood to steel. ● This is a reasonably sized workbench designed for solo work. There are various types available, including fixed, mobile, for seated work, and for standing work, allowing you to choose one that meets your needs.

• Other conveying machines

● Uses 60×30 square pipes, offering excellent durability. The base plate has been changed from wood to steel. ● This is a reasonably sized workbench designed for solo use. There are various types available, including fixed, mobile, for seated work, and for standing work, allowing you to choose one that suits your needs.

• Other conveying machines

● Variable magnification, straight-type scope with LED lighting The variable focal zoom function, which extends the length of the optical tube, allows for magnification changes from 30× to 50× / 70× to 100×. ● Erect image type for easy viewing like a loupe While typical microscopes produce inverted images, this product uses a Dach prism in its optical system, allowing for observation without inversion, providing an erect image. This makes it easy to handle and operate, similar to a loupe. ● Built-in 8-light high-brightness white LED illumination The bright LEDs illuminate the specimen, and the interior of the optical tube has a special anti-reflection treatment, making it gentle on the eyes and providing a clear image.

• Microscope

■ Thorough pursuit of measurement convenience ● Realization of hands-free measurement through the adoption of a "new concept" shoulder bag case that thoroughly pursues usability ● Airflow calculation and measurement functions for average, maximum, and minimum ● Integrated probe with extension rod for easy measurement at heights and inside ducts

• Wind Speed/Volume Meter

● The large display with a character height of 100mm offers excellent visibility. ● An ultra-thin display with a thickness of 18.8mm (excluding protrusions). It also excels in design when installed. ● With a 10m sensor cable, the display unit and sensor can be installed in separate locations.

• Thermometer

Height (for seated work) H740mm Caster 100φ During movement: 250kg / Lifting capacity up to 250kg

• Other conveying machines

Height (for seated work) H740mm Caster 100φ During movement: 250kg / Lifting capacity up to 250kg

• Other conveying machines

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe in explosive environments. Since the power source is compressed air from a compressor, it can be safely used in explosive areas. *If you are concerned about static electricity, please ground a separate grounding wire.

• Other conveying machines

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe in explosion-proof environments. Since the power source is compressed air from a compressor, it can be safely used in explosion-proof areas. *If you are concerned about static electricity, please ground a separate grounding wire.

• Other conveying machines

Can be used without sealing the drum. Since it is not a type that applies internal pressure to the drum, it can be used without sealing the can like an air pressure pump. Air-operated is safe even in explosion-proof environments. Since the power source is compressed air from a compressor, it can be safely used in explosion-proof areas. *If you are concerned about static electricity, please ground a separate grounding wire.

• Other conveying machines

With the AC adapter included, it can be used immediately after powering on. The emissivity can be set. ■Features ●Wide measurement temperature range: -40 to 600℃ ●No cooling required, usable at ambient temperatures up to 180℃ ●Protection structure IP65, durable stainless steel head ●Class-leading ultra-compact sensor head M12 ●Long focus D:S ratio 15:1 ●Small spot measurement of φ0.8mm/10mm (when using CF lens)

• Radiation thermometer

●We are using a rotating type hook. ●It comes with a fixed double lock mechanism. ●It can be easily removed.

• Other conveying machines

It can be used as a super compact temperature recorder, making it ideal for measuring the temperature of moving objects. Since it can record the measured data within the button, it allows for usage such as connecting to a computer to collect data only when necessary.

• Data Logger
• Thermometer
• Temperature and humidity measuring instruments

■Features ● Both the main unit and probe are waterproof with IP65/IP67 (short time) ● Measurement range: -200 to +250℃, wide range ● High accuracy: ±0.1℃ ±1 digit (in the range of -20 to +100℃) ● 1m cable and grip are heat-resistant up to 250℃ (MI1MH-2710KM) ● Fast response time (within 10 seconds) ● Long battery life: approximately 4000 to 6000 hours ● Maximum and minimum temperature memory display ● Hold function ● Comes with manufacturer's temperature calibration certificate

• Thermometer