山本ビニター List of Products and Services

Yamamoto Vinitar's high-frequency application technology, which boasts top-level status in the world, is also utilized in wood processing.

High-frequency mini board edge gluing machine, high-frequency board edge gluing and framing machine, high-frequency panel processing gluing machine, high-frequency continuous board edge gluing machine.

Corner bonding of frames, door frames, and decorative frames. Simultaneous corner bonding of frames, box frames, lighting frames, and doll cases. Simultaneous corner bonding of frames, door frames, altars, flash core materials, and mirror frames.

Simultaneous bonding of all four sides of the box frame, etc. Bonding of wooden box corners, etc. Fully automatic mass production type bonding for wooden boxes. Mass production type bonding for wooden boxes. Bonding of the bottom board of wooden boxes. (Available in single-sided and double-sided types)

Manufacturing with engineered wood

High-frequency flash bonding machine, high-frequency continuous flash bonding machine, high-frequency roller bonding machine (continuous type)

Laminated and molded adhesive for wood. Furniture components (tables, chairs) and R plywood for construction. Adhesive for structural and engineered veneer lumber (LVL).

The "TECHBOX-3WS model" is a compact and multifunctional adhesive machine designed to accommodate a wide variety of box products, including wooden and paper boxes. It features a head slide-type electrode mechanism that significantly increases production capacity. Additionally, it is capable of board bonding adhesive processing. 【Features】 ■ Efficient operation possible with slide head device ■ No need for separate collection with glue bonding ■ Capable of bonding V-cut products ■ Easy to move with casters *For more details, please refer to the PDF materials or feel free to contact us.

"Worex" is a high-frequency ceramic exterior corner adhesive machine that allows for the next material to be set during heating with a rotary design. By setting it in a V shape and heating it in an inverted V shape, it becomes easier to align the peaks. After adhesion, the amount of adhesive that sticks to the product is reduced, minimizing finishing work. Additionally, the upper part of the machine is designed with ample space, making it easy to install automatic feeding and extraction devices in the future. 【Features】 ■ Complete adhesion in a short time due to high-frequency heating ■ Adhesion possible with a small amount of adhesive application ■ No curing space required ■ Stability in strength and quality by performing high-frequency heating under pressure ■ Immediate processing after adhesion, enabling short delivery times *For more details, please refer to the PDF document or feel free to contact us.

The "PANEX-15L model" is a board edge gluing machine that meets all processing sizes. While processing one pallet, another pallet can be set up for extraction. Additionally, there are openings on both sides of the main body, allowing for the gluing of floor materials and other items over 3 meters in length. 【Features】 ■ Improved productivity with a dual-side pallet changer ■ Easy adaptation for small-batch production of various types ■ Capable of processing long materials over 3 meters ■ Automation line possible with the addition of a material handling device for one-man operation *For more details, please refer to the PDF document or feel free to contact us.

The "BONDEX-8R model" is a space-saving high-frequency flash bonding machine designed for order production. It can handle a variety of small lots and short delivery times, from custom production of interior doors to the production of components for kitchens and entrance storage. Additionally, it is equipped with an automatic feeding device, allowing it to accommodate long products without changing the setup. 【Features】 ■ Capable of producing a wide variety of small quantities ■ Equipped with an automatic feeding device for handling long materials ■ Short bonding time ■ Reduced warping of products ■ No marks from core materials appear on the decorative surface *For more details, please refer to the PDF document or feel free to contact us.

At Yamamoto Binita Co., Ltd., we offer a handy, portable high-frequency compact heating adhesive machine. It allows for spot adhesion with just one touch. Additionally, it comes standard with an automatic tuning device, eliminating the need for cumbersome adjustments. 【Features】 ■ Usable with a household power supply of 100V ■ The tip iron part and gun can be exchanged with one touch ■ Equipped with an automatic tuning device as standard, no troublesome adjustments required ■ No preheating needed; heating work can be performed immediately after powering on *For more details, please refer to the PDF document or feel free to contact us.

This is a high-frequency adhesive machine for ceramic exterior wall corners that achieves high efficiency in the subsequent process and energy savings, while also overcoming intensifying competition with high cost performance. Thanks to high-frequency bonding, products of various sizes and designs can be fully bonded in a short time. Additionally, there is no need for jigs to be stacked or tightened after bonding, significantly improving work efficiency. The traditional curing space is no longer necessary, contributing to space-saving improvements. *For more details, please refer to the PDF document or feel free to contact us.*

Traditionally, contractors for exterior wall siding have been purchasing corner pieces from corner manufacturers. Recently, due to cost reduction efforts, there has been an increase in projects where corners are processed in-house and used for on-site construction. As a way to overcome the challenges posed by the COVID-19 pandemic, how about trying your hand at corner processing? Our company is a manufacturer of siding corner adhesive machines that utilize high-frequency radio wave heating technology. If you consult with us, we can also propose ancillary equipment beyond just the adhesive machine. Currently, subsidies for the restructuring of small and medium-sized enterprises are likely to apply to this matter, so we encourage you to consider this opportunity.

Traditionally, offcuts have been subjected to secondary processing and reused as biomass fuel or paper resources. However, these processes require large-scale secondary processing, resulting in significant energy consumption and costs. Therefore, we propose a new option to bond offcuts together for reuse as wood.

Our company has a core technology with a 70-year history: High Frequency. With over 40 years of experience in the woodworking industry, the 'High Frequency Flash Bonding Machine BONDEX Series' is widely adopted by major door manufacturers. Now, a specialized model for custom production of furniture and fittings, focusing on small quantities and a variety of products, has been introduced! <Latest Model> Small Quantity, Variety, Space-Saving Type 'BONDEX-8R' - Capable of producing a wide variety of small lots and short delivery times, from custom production of interior doors to components for kitchens and entrance storage. - Optional side pressure function available! Can bond edge-glued panels! 【Made Possible by High Frequency!】 ■ Supports small quantity and variety production with short delivery times ■ Significantly improves quality (warping, core marks) ■ No need for fast drying! Works with white glue (one-component vinyl acetate)! ■ Simple operation! A bonding machine that requires no skilled operators! The BONDEX-8R is permanently displayed in our Kanto showroom! We offer free bonding demonstrations and tests at any time. (Please contact us before your visit as staff may not always be present.) 【Demonstration Event Announcement!】 November 18 - 20, 2021, from 10 AM to 5 PM We will hold a demonstration event at our Kanto showroom. The BONDEX-8R will also be demonstrated, so please stop by!

"BONDEX" is a high-frequency flash adhesive machine that is easy to operate. Once the materials are prepared and set, just press a button to start the adhesion. With quick activation and simultaneous bonding of multiple items, production time can be significantly reduced. High-frequency bonding has a short press time, which minimizes the appearance of core material marks on the surface material. We have newly added the space-saving "BONDEX-V," which accommodates custom furniture and interior doors, and the high productivity "BONDEX-VX," which finishes interior doors with two presses. 【Features】 ■ Once the materials are prepared and set, just press a button to start the adhesion. ■ Easily change the setting conditions to meet the needs of small-batch production of various types. ■ Achieve speed bonding in just 30 seconds even when using woodworking glue. ■ Quick activation and simultaneous bonding of multiple items significantly reduce production time. ■ Since only the adhesive is heated by high frequency, deformation and warping are minimized. ■ High-frequency bonding has a short press time, making it less likely to leave core material marks on the surface material. *For more details, please refer to the PDF materials or feel free to contact us.

This product is a lightweight, portable high-frequency compact heating adhesive machine that operates on a 100V power supply. It comes standard with an automatic tuning device, eliminating the need for troublesome adjustments. No preheating is required, so you can start heating work immediately after turning on the power. It can be used for edge bonding, fastening bonding, corner bonding, and for bonding wood, paper, and cardboard. 【Features】 ■ Usable with a household 100V power supply ■ The tip iron and gun can be exchanged with a single touch ■ No preheating required; you can start heating work immediately after turning on the power ■ Comes standard with an automatic tuning device, eliminating the need for troublesome adjustments *For more details, please refer to the PDF document or feel free to contact us.

The "WALLEX-5VAD" is a high-frequency outer wall corner adhesive machine that requires fewer processes compared to natural curing, allowing for the effortless production of consistently high-quality products even without skilled workers. By applying pressure to the materials with an air cylinder while quickly and evenly heating the adhesive surface, bonding is completed in just about "45 seconds." It can accommodate short delivery orders and easily respond to custom production, while also eliminating the need for space for curing or jet heaters, contributing to space-saving in factories. 【Features】 ■ Start bonding in just 3 easy steps ■ Reduces the hassle of gluing and repairs ■ Complete bonding in just about 45 seconds ■ Supports short delivery times and custom production ■ Unique beauty of high-frequency bonding ■ High bonding strength and stable quality *For more details, please refer to the PDF document or feel free to contact us.

The "MP Series" is a high-frequency flat-panel heat treatment device that eliminates "twisting" during drying while allowing for the retention of thickness for commercialization. Since there is no need to consider machining allowance, it can be dried in a thin state. Once the heating schedule is set, it operates fully automatically until the end. Additionally, the moisture content becomes uniform, minimizing the return after processing. 【Features】 ■ Eliminates "twisting" during drying ■ Allows for commercialization while retaining thickness ■ Improves yield ■ Reduces drying costs ■ Fully automatic operation ■ Minimizes return *For more details, please refer to the PDF document or feel free to contact us.

The "BONDEX-V" is a high-frequency flash bonding machine that can widely accommodate custom furniture and interior doors. In cold pressing, the curing time for flash panels takes several tens of minutes to several hours, making it impossible to move on to the next task immediately. However, with the "BONDEX-V," bonding of flash panels can be completed in just "30 seconds," leading to overwhelming productivity improvements. Additionally, because it heats with high frequency, it reduces material warping and eliminates core material marks, resulting in superior "finish quality." The new space-saving model "BONDEX-V" has been made more compact, with a depth of about 60 cm, due to the integration of the high-frequency oscillator and the main unit, as well as the miniaturization of high-frequency components (see the third photo). Also, with casters, it is easy to transport and move! The structure of the grid electrodes, which alternate between positive and negative electrodes, has been significantly improved, reducing maximum input by about 31% (compared to the conventional model BONDEX-8R), contributing to energy cost savings. *For more details, please refer to the PDF document or feel free to contact us.

The "BONDEX-VX" is a high-frequency flash bonding machine designed for high productivity, finishing interior doors in two presses. In cold pressing, the curing time for flash panels takes from several minutes to several hours, preventing immediate transition to the next task. However, with the "BONDEX-V," bonding of flash panels can be completed in just "30 seconds," leading to overwhelming productivity improvements. Additionally, because it heats with high frequency, it reduces material warping and eliminates core material marks, resulting in superior finish quality. Achieve higher quality finishes with "Focus Matching"! The acceleration of machine operation enhances work efficiency. Furthermore, the "pendant-type operation panel," which can be adjusted to match the working position, improves usability. 【Features】 ■ Realizes Level 2.5 automation technology for high-frequency flash bonding ■ Integrated oscillator reduces installation space by approximately 35% ■ "Direct Grid Electrode" reduces energy costs ■ Higher quality finishes with "Focus Matching" ■ Electrode cleaning function (optional) *For more details, please refer to the PDF document or feel free to contact us.

The "BONDEX-8R" is a high-frequency flash bonding machine that can be widely used for desktops and interior doors. The newly equipped "BONDEX-8RD" model not only produces flash panels but also enables "laminating boards and wood edges" thanks to its side pressure function! It is suitable for order production and can be installed in a space-saving manner. By selecting from three sizes (large, medium, small) on the touch panel, heating time, current value, and pressure can be automatically set. Therefore, regular operation is as simple as "one touch"! Additionally, with the automatic feeding device, it can endlessly accommodate long materials! 【Features】 ■ Reduces labor costs and losses due to defective products through high-speed, high-quality bonding ■ The core material marks do not appear on the decorative surface, resulting in a smooth and beautiful finish ■ Capable of flash bonding, surface lamination, and melamine lamination ■ Supports small-batch production of various types ■ Improves the working environment as it uses a one-component adhesive *For more details, please refer to the PDF materials or feel free to contact us.

"I want to process a single slab table, but it's warped and can't be planed!" Are you throwing away wood that is still usable like this? Wood has the property of warping easily when heated. By utilizing this, we can eliminate warping by applying high frequency while applying pressure to the warped board. The board that was supposed to be discarded can be used!! Benefits: 1. By heating from the inside of the material, it becomes soft and can be bent without destroying the interior. 2. Heating allows for a reduction in moisture content. Additionally, since it is heated with high frequency, moisture evaporates from the areas with high moisture content inside, resulting in a more uniform moisture content throughout the wood. 3. When planing warped materials, it takes about five minutes on one side, then after flipping it over and planing again, another five minutes. This process needs to be repeated about ten times. However, when using high frequency, the number of planing operations is reduced, and the need to flip the material is eliminated, leading to increased productivity. - There are many more benefits. Our company website features characteristics of such devices and usage videos. We have successfully flattened materials that seemed impossible to fix, so please take a look.

The high-frequency flash bonding machine BONDEX-8R, which can widely accommodate custom furniture and interior doors, is succeeded by the latest model, BONDEX-V. We would like to introduce the evolved features. 1. Elimination of cumbersome condition input This device has achieved "Automation Level 2.5," which is condition-based automation. By simply following the simple guidance on the touch panel to input conditions, it automatically calculates heating time and curing time. Additionally, it automatically adjusts the pressure based on the automatic measurement of the workpiece width and temperature detection. 2. Space-saving design The high-frequency oscillator necessary for the high-frequency heating device was placed at the back of the BONDEX-8R, but in the BONDEX-V, we have successfully placed it inside the device. It has been miniaturized to approximately 60 cm in depth. 3. Increased productivity We have made significant modifications to the high-frequency grid electrodes from the BONDEX-8R, successfully reducing energy costs by about 30%. Furthermore, we have increased the workpiece transfer speed and the rise and fall speed of the electrodes, resulting in a significant improvement in workability. A reduction in cycle time is anticipated.

Are you having trouble with the handling of glue that drips and sticks to the product after processing with fiber cement siding? The WALLEX-5VAD solves that problem! The WALLEX series is a device that flows high frequency through the set materials in fiber cement siding, allowing for quick adhesion in a short time. In particular, this device can be easily set with the corners facing up when setting the materials, and during processing, it rotates 180°, allowing for adhesion with the corners facing down, ensuring that all glue drips come directly above the corners. This simplifies the handling of glue after processing and contributes to improved takt time. (See video) Additionally, since the next material can be set while the current material is being heated, the takt time is improved by about 1.5 times compared to conventional devices. *Please note that due to ongoing improvements in specifications, the current shape of the device may differ from the shape shown in the photos. For more details, please visit our company website.

Are you having trouble adjusting the angle when aligning materials for adhesion with fiber cement siding? The WALLEX-3AE will solve that problem! The WALLEX series is a device that flows high frequency through the set materials in fiber cement siding, allowing for quick adhesion in a short time. Previous devices required the insertion of thin shims for angle adjustments, but with this device, you can easily make fine adjustments by simply sliding the jig at hand after adjusting the height with spacers to a certain level. (See the video) By reducing the time spent on angle adjustments, it also contributes to an overall increase in productivity! For more details, please visit our company website.

When performing adhesive processing on furniture and musical instruments, are you using nails or tape for temporary fixing? With the high-frequency adhesive machine TECNOGAN, those are no longer necessary! TECNOGAN locally heats and dries the areas where adhesive is applied, making the process quick and easy for post-processing. Additionally, it requires no preheating and can be used immediately after turning on the power! Furthermore, depending on the application, it is also possible to replace the handheld jig with an iron-shaped one!

Are you spending too much time on the adhesion of wooden boxes and paper boxes? Our TECHBOX adhesive device for wooden and paper boxes will solve your problem! TECHBOX has a proven track record in the production of decorative gift boxes for ceramics, lacquerware, sake, wine, somen noodles, osechi, and food items. ~Processing Details~ By setting the materials coated with adhesive and pressing a button, the device automatically applies pressure and performs adhesion processing using high frequency. Since it achieves complete adhesion with high frequency, there is no need for tools to fix materials like rubber bands, and no curing space is required, leading to cost and space savings. Of course, it supports both fastening and potato processing. We offer various models of TECHBOX according to production volume, so please visit our company website for more details.

The "BONDEX-8R model" is a space-saving high-frequency flash bonding machine designed for order production. It is capable of processing a wide variety of materials, from custom production of interior doors to components for kitchen and entrance storage. Additionally, during the summer, the heating time per cycle is approximately 15 seconds, making it very fast and suitable for small lot production, which leads to shorter delivery times. By using adhesives designed for high frequency, it achieves reduced warping. It can also process long products with automatic feeding until the end! Material discharge can be done from either the front or back, allowing for flexible adaptation to the work line! 【Features】 ■ Capable of small lot production of various types ■ Equipped with an automatic feeding device, suitable for long materials ■ Short bonding time ■ Reduced warping of products ■ No marks from core materials appear on the decorative surface *For more details, please refer to the PDF document. Testing can also be conducted at our factory, so please feel free to contact us.

This device is primarily designed for use with legged furniture such as desks and chairs. By applying high frequency to difficult-to-fix areas, such as curved joints, it allows for precise adhesion. It can be easily transported with a 100V power supply! There is no need for troublesome adjustments or preheating, so you can start working immediately after turning on the power. 【Features】 ■ Usable with standard household 100V power supply ■ The tip iron and gun can be easily exchanged with one touch ■ No preheating required; you can start heating work immediately after powering on ■ Equipped with an automatic tuning device, eliminating the need for complicated adjustments *For more details, please refer to the PDF document or feel free to contact us.

This device looks the same as a household iron and is used in the same way. By applying high frequency to the areas where adhesive is applied, pinpoint adhesion is possible. It is especially recommended for those manufacturing relatively small products! It can be easily transported with a 100V power supply! There is no need for troublesome adjustments or preheating, so you can start working immediately after turning on the power. It can be used for edge bonding, fastening, corner bonding, and for adhering wood, paper, and cardboard. It is also used for temporarily securing flash panels! 【Features】 ■ Usable with a household 100V power supply ■ The tip iron part and gun can be exchanged with one touch ■ No preheating required; you can start heating work immediately after turning on the power ■ Equipped with an automatic tuning device as standard, eliminating the need for troublesome adjustments *For more details, please refer to the PDF document or feel free to contact us.

A device for bonding flash panels using high frequency. Among them, the BONDEX-40L is particularly designed for drying adhesives on large flash panels. This is a press size that can heat flash panels used in typical residential doors and closets in one go. It is quite large compared to our other flash panel bonding devices and is perfect for those who want to significantly increase production in large batches, and who are dissatisfied with the wasted space and materials currently used for cold pressing to dry adhesives. Testing in our factory is of course available, and visits to the factories of customers who have actually implemented the device are also possible, so please feel free to contact us.

High-frequency bonding processing of laminated wood can be performed in a short time. Of course, short-length processing is possible, and since the door on the side of the device can be opened and closed, long-length products can also be processed in two operations! 【Features】 ■ Compatible with long-length products ■ Short bonding time *For more details, please refer to the PDF document. You can also contact us for testing at our factory.

Our company conducts wood heating using high frequency and handles devices that quickly dry adhesives for products such as flash panels, laminated wood, LVL, and CLT, as well as devices that heat and straighten single boards. Some customers who are considering our products may be concerned about how much their operational efficiency will improve and the quality of the products. For such customers, we would like them to visit the factories of customers who have actually implemented our devices and be satisfied with the results. If you have any concerns, please feel free to contact us.

The high-frequency board laminating and framing adhesive device MWY-8HL is a relatively compact model among our equipment for the same processing content. Its design allows materials to be leaned against it like a panel saw, making material setup easy. Additionally, it supports not only board laminating but also framing processing!

Some customers who are considering our high-frequency flash bonding machine, the BONDEX series, ask questions like, "Will the material warp after bonding?" Since our high-frequency flash bonding equipment uses a special adhesive for high frequency, the amount of adhesive applied is minimal, and warping hardly occurs. If you would like to see the extent of warping, we can conduct tests at our factory with your materials. Additionally, visits to the factories of customers who have already introduced our equipment are also possible, so please feel free to contact us if you are interested.

The high-frequency flat-panel heat treatment device REFIX-8 is a machine that straightens warped single boards using high-frequency power. Natural wood single boards are prone to warping as drying progresses, and if the material is cut about 50mm thicker than the product to account for warping, the yield becomes very poor. With this device, it is possible to minimize the finishing allowance, reduce losses during the cutting process, and extract more from a single piece of precious wood. The greatest appeal of a single board is that there is nothing else like it in the world. Conversely, this means that a processing program tailored to all materials is necessary. This is where our "interactive navigation system," designed with ease of use in mind, comes into play. Once processing starts, the device measures the amount of deflection in the material, and when the change is minimal, the device requests the next instruction from the operator. The operator selects additional instructions from the conditions provided by the device. In this way, the operator and the device engage in a dialogue, adjusting the heating according to the individuality and changes of the board. Additionally, the heating history is recorded as data, allowing for better processing by considering measures against warping and types of surface treatment.

As a new heating process, how about "microwave heating"? It has a wide range of applications, including "heating," "drying," and "sterilization and disinfection treatment," and we can propose equipment types tailored to your processing needs. Microwave heating allows for high-efficiency heating in a short time by heating from within the material, and it is used for heating hollow fiber membranes used in dialysis treatment, as well as other medical products, resins, and fibers. Since there is no need to heat the surrounding air, energy efficiency can also be improved. It can be used in conjunction with other heat sources (such as hot air or steam). Additionally, there are methods to increase heating efficiency by reducing pressure within the furnace according to the situation. We will propose the optimal equipment type from various types of microwave heating devices.

The "BONDEX-V" is a space-saving type high-frequency flash bonding machine that can widely accommodate custom furniture and interior doors. With the "Direct Grid Electrode," it reduces energy costs, and through "Focus Matching," it enables a higher quality finish. Additionally, we offer a lightweight, portable "High-Frequency Compact Heating Bonding Machine (Techno Gun / Techno Iron Type)" that can be used with a household power supply of 100V. 【Features】 ＜BONDEX-V＞ ■ Easy condition setting with automatic condition detection and RF navigation ■ Increased speed of electrode elevation and transport, shortening the operation cycle time ■ High-frequency managed with high precision through focus matching ■ Achieves high-frequency flash bonding automation technology "Level 2.5" ■ Integrated oscillator reduces installation space by approximately 15% *For more details, please download the PDF or feel free to contact us.