ジェイエムエス Product Lineup

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. Hydrogen sulfide gas is generated in sulfuric acid treatment and wastewater treatment facilities at recycling, paperboard, and cardboard manufacturing plants. Even trace amounts of hydrogen sulfide gas that do not affect human health can have a significant impact on equipment. Hydrogen sulfide gas at levels of just a few tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is a simple and low-cost solution for addressing hydrogen sulfide gas. ＊＊＊＊Exhibition Information＊＊＊＊ We will be exhibiting at the Sewerage Exhibition 25 in Osaka. Event Period: 2025/7/29-8/1 Booth Number: 2-317

Chlorine gas is removed using a chemical adsorbent. Since the gas is removed through a chemical reaction, there is no concern about the gas being released again, allowing for reliable removal of the gas. Our chemical adsorbent-based color shooter purifies the air and removes chlorine gas within the control panel of the device.

Hydrogen sulfide gas is generated in the wastewater treatment process of meat processing plants. Even at gas concentrations of a few ppb (1/1000 of ppm), this hydrogen sulfide gas can have a significant impact on equipment. The contact points of the equipment in the wastewater treatment facility can corrode, leading to equipment failure. JMS Corporation provides comprehensive support from the investigation of corrosive gases (hydrogen sulfide gas) to countermeasures. First, we conduct an investigation into the pathways and causes of hydrogen sulfide gas intrusion, as well as an environmental risk analysis. After the investigation, we will propose optimal environmental improvements tailored to your site.

By installing it at sites where equipment is failing due to corrosion from hydrogen sulfide gas, you can monitor the timing of hydrogen sulfide gas intrusion in real-time. The gas concentration meter is battery-operated, so there is no need for complicated power installation. You can monitor hydrogen sulfide gas concentration simply by installing the meter at the concerned site. Communication uses mobile networks, so it can be installed anywhere there is mobile signal coverage. When the concentration of hydrogen sulfide gas rises, it will notify you of the gas information via LINE. You can share information about hydrogen sulfide gas concentration within a LINE group, which can be utilized for collective improvement activities at the site. The chromatogram of hydrogen sulfide gas data can be checked online, making it easy to confirm using a mobile phone or computer.

◆Effective for maintaining control panel equipment! You can reduce the frequency of maintenance!◆ It protects independently installed control panels and operation panels from internal corrosion caused by corrosive gases, preventing various losses due to troubles with control and electrical equipment inside the panel. Additionally, it can be adapted to control panels installed in various locations, such as those outside the instrument room or in areas where corrosive gases are present. 【Features】 ■Removal speed: Approximately 0.0 ppm (hydrogen sulfide) in about 400 seconds from 2.0 ppm ■Removal efficiency of over 95% (due to the airtightness of the control panel) ■Three types of MODELS available according to installation space ■Adsorbent modules use recycled paper, considering the environment *For more details, please request materials or download the catalog.

In the tire factory's vulcanization process, sulfur-based gases are generated. The emitted sulfur-based gases are at a low concentration of several tens of ppb, which do not affect the human body, but they are highly corrosive and can cause failures in the contact parts of machinery. Additionally, corrosion of chip resistors can change their resistance values, leading to reported cases of affecting the operation of control devices. JMS Corporation provides comprehensive support from the investigation of sulfur gases to countermeasures. First, we conduct an investigation into the entry routes and causes of sulfur-based gas, as well as an environmental risk analysis. After the investigation, we will propose the most suitable environmental improvements tailored to the customer's site.

The Coro Shooter protects equipment from corrosive gases caused by air pollution. India is experiencing significant economic development. On the other hand, air pollution has become a major social issue. The SOx and NOx contained in air pollution have high corrosive components, which can lead to equipment failure. The Coro Shooter removes SOx and NOx to purify the air and prevent equipment failure caused by corrosive gases.

The main reason hydrogen sulfide gas is generated during the manufacturing process of sulfide-based solid-state batteries is due to the materials and reactions used in the manufacturing process. In the manufacturing process, the materials that make up the components of sulfide-based solid-state batteries include sulfides. When these sulfides are heated or undergo chemical treatment, they may decompose and produce hydrogen sulfide gas. In battery manufacturing, multiple reactions can occur simultaneously. In some reaction processes, sulfides may change, resulting in hydrogen sulfide being produced as a byproduct. The manufacturing of sulfide-based solid-state batteries may involve high-temperature processing. When materials change at high temperatures, there is a possibility that sulfides will decompose and generate hydrogen sulfide. If incomplete reactions occur during the process or if impurities are present, this may contribute to the generation of hydrogen sulfide from sulfides. Since hydrogen sulfide gas is toxic and hazardous, monitoring and removal of hydrogen sulfide gas are necessary in factories and research facilities.

Potassium carbonate removes sulfur gas/sulfide gas in one go. It is ideal for countermeasures against hydrogen sulfide gas (H2S) and sulfur dioxide gas (SO2). Reaction equation with hydrogen sulfide gas: H2S + 2KOH + 2O2 → K2SO4 + 2H2O Reaction equation with sulfur dioxide gas: SO2 + 2KOH → K2SO3 + H2O

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. In the wastewater process of food factories, trace amounts of hydrogen sulfide gas are generated. Although it is said that trace amounts of hydrogen sulfide gas do not affect human health, the impact on equipment is significant. Even hydrogen sulfide gas at levels of a few tens of ppb can cause equipment failure due to corrosion. If you install the Coro Shooter inside the control panel where the equipment is housed, it will purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is possible to implement measures against hydrogen sulfide gas easily and at a low cost.

This is an adsorbent that removes chlorine gas through a chemical reaction. It prevents corrosion caused by chlorine gas. Unlike physical adsorbents like activated carbon, chemical adsorbents remove gas through chemical reactions, so there is no concern about gas re-release.

There are various methods for removing hydrogen sulfide gas. In this instance, we conducted comparative experiments using (1) chemical adsorbent methods and (2) photocatalytic methods, which are commonly adopted for hydrogen sulfide gas countermeasures. We filled a 1m³ container with 3.4 ppm (3400 ppb) of gas and compared the removal performance of the chemical adsorbent method and the photocatalytic method. According to the data in the graph, it was found that the chemical adsorbent method sharply decreased the gas concentration compared to the photocatalytic method. While the photocatalytic method took about 120 seconds to reduce the concentration from 3.4 ppm to 0 ppm, the chemical adsorbent completed the removal in approximately 40 to 50 seconds. It can be concluded that by adopting a removal device using a chemical adsorbent, it is possible to minimize the time that electronic devices are exposed to hydrogen sulfide gas when it intrudes.

Hydrogen sulfide gas is highly toxic, and concentrations of hydrogen sulfide gas above 10 ppm can lead to a diminished sense of smell, with headaches and nausea potentially occurring quickly. At high concentrations around 800 ppm, the risk of acute poisoning increases, and the possibility of death arises. However, even at low concentrations of hydrogen sulfide gas at the ppb (0.05 ppm) level, which have no impact on the human body, the effects on equipment can be significant. According to ISA standards, gas management for electrical control equipment is required to be below 50 ppb. Machinery is more vulnerable to hydrogen sulfide gas than humans, necessitating strict management.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. In the vulcanization process at tire and rubber factories, trace amounts of hydrogen sulfide gas are generated. Although these trace amounts of hydrogen sulfide gas do not affect human health, their impact on equipment is significant. Even hydrogen sulfide gas at levels of a few tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is possible to implement measures against hydrogen sulfide gas easily and at a low cost. [Advertisement] We will be demonstrating the Coro Shooter at INCHEM TOKYO 2023. https://www.jma.or.jp/INCHEM/ We look forward to your visit. Date: September 20-22, 2023 Venue: Tokyo Big Sight Booth Number: 2X07

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. Although trace amounts of hydrogen sulfide gas may not affect human health, the impact on equipment is significant. Even hydrogen sulfide gas at concentrations of a few tens of ppb can cause equipment failures due to corrosion. Hydrogen sulfide gas generated during wastewater treatment can infiltrate control equipment through pipes and cables. Low-concentration hydrogen sulfide gas floats within factories, and visualizing this invisible gas is very challenging. JMS Co., Ltd. acts as an expert in hydrogen sulfide gas, providing visualization of hydrogen sulfide gas and assisting in process improvements.

Floating microscopic particles (including metal flakes and metal particles) and reactive gases can adversely affect servers, either alone or in combination with environmental factors such as humidity and temperature. The risks posed by excessively small particles or high concentrations of harmful gases may lead to server malfunctions or, in the worst case, complete system failures. IBM and AWS may have specified design environment specifications to manage data centers at level G1 of ASI/ISA71.04-1985. By measuring with corrosion gas test specimens, which are an environmental analysis method compliant with ISA S71.04-2013, it is possible to visualize the environment of the data center.

Oxidation of microorganisms and organic matter: Potassium permanganate has the ability to react with and oxidize microorganisms and organic matter. This helps to remove unpleasant odors and harmful microorganisms from the air, demonstrating a purifying effect. Odor removal: Potassium permanganate is particularly effective as an oxidizing agent against organic matter, allowing it to decompose and neutralize substances that cause unpleasant or foul odors. By keeping the amount of potassium permanganate, which needs to be handled with care, to a minimum, safety is ensured. It can also be used safely during handling.

It is a chemical adsorbent that removes ammonia gas through a chemical reaction. Since it removes gas through chemical adsorption, there is no re-release of the gas, making it possible to reliably eliminate ammonia gas.

The VR-500 series products are spray can types of phenolic resin-based paint, which can be easily applied for corrosion protection as they air dry. The VR-500 series products create a protective film that excels in durability, adhesion, and flexibility, making them suitable for use in corrosive gas environments, saline corrosive atmospheres, and high humidity locations. Since they come in a spray can type, a primer is not necessary. For more details, please download and view the catalog. They are available for procurement on Amazon.

In the rubber industry, measures against odors caused by sulfur gases generated during the vulcanization process are required. These odors not only worsen the working environment but also raise concerns about their impact on nearby residents. Additionally, sulfur gases can corrode the contact parts of control equipment, leading to failures. Our products have been developed to address these challenges. 【Application Scenarios】 - Vulcanization process in rubber factories - Locations where odor control is necessary - Places where the risk of control equipment failure needs to be reduced 【Effects of Implementation】 - Improvement of the working environment due to odor reduction - Reduction of the risk of control equipment failure - Increased factory operating rates

In the food processing industry, hygiene management of the manufacturing environment is crucial for maintaining product quality. Chlorine gas generated during the cleaning process can lead to product quality deterioration and corrosion of manufacturing equipment. Our chlorine gas removal filter system effectively removes chlorine gas using chemical adsorbents, contributing to the preservation of product quality. 【Usage Scenarios】 - Cleaning processes in food processing plants - Quality control departments - Protection of manufacturing equipment 【Benefits of Implementation】 - Reduced risk of product quality deterioration - Extended lifespan of manufacturing equipment - Stable supply of quality products

In the livestock industry, the odor caused by hydrogen sulfide gas generated from livestock waste is a significant issue. This unpleasant smell not only leads to complaints from nearby residents but can also adversely affect the health of workers and the growth environment of livestock. Our product removes sulfur gases and sulfide gases through chemical reactions, addressing the odor problem. It is ideal for countering hydrogen sulfide gas (H2S) and sulfur dioxide gas (SO2). 【Usage Scenarios】 - Livestock barns - Composting facilities - Wastewater treatment facilities - Other livestock-related facilities where odors occur 【Benefits of Implementation】 - Reduction of unpleasant odors - Improvement of the working environment - Measures against complaints from nearby residents - Enhancement of the growth environment for livestock

In the pulp industry, measures against hydrogen sulfide gas are required to protect the health and safety of workers. In particular, the generation of hydrogen sulfide gas from waste paper processing and wastewater treatment facilities not only deteriorates the working environment but also causes equipment failures due to corrosion. The Koro Shooter removes hydrogen sulfide gas and contributes to the improvement of the working environment. 【Usage Scenarios】 * Waste paper processing plants * Wastewater treatment facilities * Protecting the health and safety of workers 【Benefits of Implementation】 * Improvement of the working environment * Prevention of equipment failures due to corrosion * Cost-effective measures against hydrogen sulfide gas

In the water treatment industry, chlorine gas is used in the disinfection process. This gas can corrode control equipment and surrounding facilities, potentially leading to failures. Equipment downtime affects the continuity of the water treatment process and can hinder stable supply. Our chlorine gas removal filter system eliminates chlorine gas using a chemical adsorbent, reducing the risk of equipment corrosion. 【Usage Scenarios】 - Near sources of chlorine gas in the disinfection process - Inside control panels - Within water treatment facility equipment 【Benefits of Implementation】 - Extended equipment lifespan - Maintenance of a stable water treatment process - Reduction in maintenance costs

In the warehousing industry, maintaining the quality of stored items is crucial. It protects the refrigerant pipes of refrigerators from hydrogen sulfide gas generated by food. 【Usage Scenarios】 - Storage of food ingredients - Storage of products - Storage of chemicals - Protection of equipment within the warehouse 【Benefits of Implementation】 - Maintenance of the quality of stored items - Preservation of product value - Gaining customer trust - Prolonging the lifespan of equipment

In the seafood processing industry, hygiene management is extremely important, and equipment deterioration due to corrosion increases the risk of product quality decline and foreign matter contamination. In particular, seafood processing plants are prone to corrosion from salt and moisture, which can lead to early equipment deterioration. Our product protects equipment from corrosion and maintains a hygienic environment, ensuring product quality and safety. 【Usage Scenarios】 - Storage of ingredients - Storage of products - Storage of chemicals - Protection of equipment in warehouses 【Benefits of Implementation】 - Maintenance of storage quality - Preservation of product value - Gaining customer trust - Prolonging equipment lifespan

In the production line of automobile manufacturers, the manufacturing process of sulfide-based all-solid-state batteries may generate hydrogen sulfide gas due to materials, reactions, high-temperature treatments, and incomplete reactions. Hydrogen sulfide gas is toxic, making its monitoring and removal crucial for ensuring the safety of workers and the stable operation of the production line. 【Usage Scenarios】 - Manufacturing line for sulfide-based all-solid-state batteries - Heating and chemical processing of materials - Reaction processes - Research and development facilities 【Benefits of Implementation】 - Ensuring a safe working environment - Stable operation of the production line - Support for compliance with regulations

In the rubber product manufacturing industry, it is necessary to address sulfur-based gases generated during the vulcanization process. Even at low concentrations, these sulfur-based gases can be highly corrosive and may cause failures in control equipment. Changes in resistance values due to corrosion of chip resistors can potentially affect the operation of control devices. JM Solutions Co., Ltd. provides comprehensive support from the investigation of sulfur-based gases to countermeasures, proposing environmental improvements tailored to our customers' sites. 【Application Scenarios】 - Measures against sulfur-based gas generation during the vulcanization process - Prevention of control equipment failures - Maintenance and improvement of factory operating rates 【Benefits of Implementation】 - Reduction of equipment failure risks due to corrosive gases - Achievement of stable operation of control equipment - Stabilization of production lines