ナセル List of Products and Services

Abaco's reflective memory is an interface board for sharing memory in real-time between 2 to 256 systems. Data written to the RAM of a specific node is immediately reflected across the entire network. ■ Japanese technical documents for MIL-STD-1553 / ARINC 429 / AFDX are available. If you would like to see them, please contact sales@nacelle.co.jp ■

• Other network tools

The AS5643 I/F board comes in USB, LAN, and PCI/cPCI types. The AS5643 supports speeds of 100/200/400/800 bps. The bus analysis analyzer software FireSpy Mil1394 provides functions for Monitor, Recorder, Commander, Generator, Filter/Trigger, and Scriptor. ■ Japanese technical documentation for the AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp. Alternatively, it can also be downloaded from the catalog page.

• Other network tools

FireCore integrates the PHY and link layer requirements necessary for common 1394 devices into a single IP core. Based on the FireGate PHY IP core and FireLink LLC IP core, FireCore is designed to support data rates from S100 to S3200 and various host interfaces such as generic, OHCI, and OHCI (with AS5643 option). DapTechnology's new FireCore package offers unprecedented technical capabilities, features, flexibility, and options for customization and future expansion. Together with FireStack (DapTechnology's 1394 software stack), FireCore is designed to fully leverage the capabilities of the AS5643 extension. It aims to completely abstract the 1394 protocol layer and the AS5643 protocol layer, allowing implementers to focus entirely on system-level functionalities such as fault tolerance, fault isolation, and redundancy.

• others

FireLink, a synthesizable IEEE-1394-2008 beta link layer controller (LLC) core, is based on the link layer controller that has been used in DapTechnology's FireSpy analyzer products for several years. FireLink is a mature core implemented on FPGAs from Xilinx, Altera, and Microsemi. FireLink is available in three configurations: Basic, Extended, and GPLink. ■Japanese technical documentation for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp■

• others

Advantages of implementing a complete 1394 I/O interface using FPGA Standalone solution: By combining PHY IP with link layer IP, it is possible to create smaller products. Additional components can be added to create a system-on-chip (SoC) solution. Flexible number of ports: Commercially available PHY chips have a fixed number of ports, which is often excessive for small peripherals. On the other hand, host adapters are likely to benefit from three or more ports, and hubs can have even more ports. In the case of PHY based on FPGA technology, users can customize the number of ports as needed. Optional debugging and testing features: Optionally, debugging and testing features such as BERT (Bit Error Rate Testing) can be included. Field upgradable: The FPGA used is field-upgradable, allowing new features and bug fixes to be added even when the device is already in the field. Cost-effective ASICs: Once the design is complete, the IP solution provides a very cost-effective way to spin custom ASICs.

• others

The Triple Series USB/Ethernet host-type FireSpy3810 and FireSpy3410bT incorporate three FireSpy bus analyzers in one compact package. Designed to meet the requirements of the AS5643-based triple-redundant bus architecture, the FireSpy3x10(bT) allows a single FireSpy to connect to three synchronized analysis engines while connecting to three IEEE-1394 buses. Based on the Gen2 hardware platform, the FireSpy3x10(bT) features 1GB of internal memory and a powerful processor, providing the necessary resources for all three buses. With USB 2.0 and Ethernet host interfaces, communication with the FireSpy is achieved at speeds 10 to 40 times faster than that of Basic series products. ■Japanese technical documentation for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp■

• others

The FireSpy3822bT and FireSpy3422bT bus analyzers are the latest 3-bus IEEE-1394 protocol analyzers. The FireSpy3422bT/3822bT is based on the fourth generation of FireSpy analyzer architecture and is the most advanced 1394 test device. With seamless integration of the SAE AS5643 protocol, the FireSpy3422bT/3822bT has become a suitable tool for many aerospace and defense development tasks. DapTechnology continuously updates the analyzer's capabilities in accordance with implementation requirements and ongoing standardization efforts to fully support the AS5643 protocol across all major functional areas of the FireSpy3x22bT. The FireSpy3422bT/3822bT is equipped with 5GB of internal memory and can be connected to a host computer using a PCIe interface. On the host, the FireSpy can be controlled using a graphical user interface, allowing for the analysis and display of bus traffic in a user-friendly manner.

• others

The FireSpy3832bT and FireSpy3432bT bus analyzers are the latest 3-bus IEEE-1394 protocol analyzers. The FireSpy3432bT/3832bT is based on the fourth generation of FireSpy analyzer architecture and is the most advanced 1394 test device. With seamless integration of the SAE AS5643 protocol, the FireSpy3432bT/3832bT has become a suitable tool for many aerospace and defense development tasks. DapTechnology continuously updates the analyzer's capabilities in accordance with implementation requirements and ongoing standardization efforts to fully support the AS5643 protocol across all major functional areas of the FireSpy3x32bT. The FireSpy3432bT/3832bT is equipped with 5GB of internal memory and can be connected to a host computer using a USB3.0 interface. On the host, the FireSpy can be controlled using a graphical user interface, allowing for the analysis and display of bus traffic in a user-friendly manner.

• others

The FireSpy810, FireSpy410b, and FireSpy410bT bus analyzers are second-generation IEEE-1394 analyzers from Dap Technology. The FireSpyx10(bT) is a small and compact device equipped with 1024MB of internal memory, providing extensive hardware filtering and triggering through an efficient FPGA and onboard processor. They support transfer speeds of up to 800Mb and are fully compliant with IEEE-1394b. Two bilingual 1394b ports facilitate connection to the system under test. The FireSpyx10(bT) can be connected to a host computer via a USB2.0 interface, and the Ethernet port allows for easy network integration and remote control. The GUI operates on Windows OS, is intuitive to use, and makes data display and user control straightforward. Additionally, the included API enables the development of custom control software and interfaces using C/C++ or LabVIEW.

• others

The FireDiagnostics Suite is software used in conjunction with Dap Technology's FireSpy. This software integrates 1394 analysis, simulation, and interface tools for a wide range of applications. In addition to hardware-assisted analyzer tools such as monitors, recorders, generators, commanders, scriptwriters, and Mil1394 signal monitors, this suite also provides a set of software tools designed to integrate FireSpy products into various test applications. The FireDiagnostics Suite is created through an application programming interface (API), and applications for the FireSpy analyzer equipped with interfaces for development environments such as C/C++ and LabVIEW TM on Microsoft Windows OS are highly flexible. By using the API library, you can control all hardware-assisted analyzer tools such as recorders and generators, as well as lower-level 1394 bus functions.

• others

MIL1394, like the commercial IEEE1394 FireWire, has limitations on the length of the connection cable. Therefore, to extend a 1394 connection, it is necessary to use thicker wires or add signal repeaters. DapTechnology has developed a wide variety of repeater models, offering about 25 different configurations, including simple pass-through, multi-pass-through, fiber optic conversion, and EMI-enhanced solutions. Various cable harnesses are also available, using the proven GORE FireWire cables. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

There is a growing demand for more streamlined hardware systems for processing AS5643 data streams used for defense purposes. In particular, advanced error insertion capabilities, which cannot be achieved with commercial link layer implementations, are required for simulation purposes. FireTrac is designed to natively support AS5643 (not just as an add-on protocol). In addition to standard IEEE1394 functionality, FireTrac is designed to provide hardware-level support for SAE AS5643, particularly alleviating the burden on the host processor for tasks such as packet encapsulation, data extraction, and receive/transmit STOF offsets. Importantly, FireTrac is highly accurate as it fully processes AS5643 transmission timing in hardware. Support for this protocol is built into the hardware, rather than relying solely on a software layer as is commonly provided by other solutions that depend on COTS OHCI chipsets. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

There is a growing demand for more streamlined hardware systems for processing AS5643 data streams used for defense purposes. In particular, advanced error insertion capabilities, which cannot be achieved with commercial link layer implementations, are required for simulation purposes. FireTrac is designed to natively support AS5643 (not just as an add-on protocol). In addition to standard IEEE1394 functionality, FireTrac is designed to provide hardware-level support for SAE AS5643, specifically alleviating the burden on the host processor for tasks such as packet encapsulation, data extraction, and receive/transmit STOF offsets. Importantly, FireTrac is highly accurate as it fully processes the transmission timing of AS5643 in hardware. Support for this protocol is built into the hardware, rather than relying solely on a software layer as is commonly provided by other solutions that depend on COTS OHCI chipsets. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

DapTechnology's FireStealth810bN is the world's first "stealth mode" IEEE-1394b analyzer equipped with non-intrusive bus monitoring technology. The FireStealth IEEE-1394b analyzer does not participate in the bus topology, so topology reconfiguration and node ID reassignment do not occur. It becomes invisible to all other devices on the bus and does not participate in bus management activities such as root contention, cycle start generation, and transmission arbitration. FireStealth is a compact device equipped with 1024MB of internal memory. This device provides extensive hardware filtering and triggering through efficient FPGA and onboard processors. It supports transfer rates of up to 800MB. FireStealth connects to a host PC via USB2.0 or Ethernet. The GUI software operates on Windows and is intuitively operable. Additionally, the included API allows for the development of custom control software using C/C++ or LabVIEW.

• Other network tools

Edgewater Inc. (Canada) has standardized Extended 1553 as STANAG7221. This new technology enables 100Mbps communication using existing MIL-STD-1553B wiring. It is compatible with the existing MIL-STD-1553B and provides a separate 100Mbps communication channel. It is suitable for programs aimed at enhancing aircraft capabilities. Adoption is increasing in fixed-wing and rotary-wing aircraft in the U.S. and Europe. Demonstrations are available. ■ Japanese technical documentation for STANAG7221 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Other network tools

The Edgewater EHS-7221-EVK lab evaluation kit is a complete testing package for evaluating STANAG 7221 data bus traffic in a lab environment. The EHS-7221-EVK is designed to familiarize developers with the standard early in the development process, allowing them to modify and reconfigure bus components to test the performance of STANAG 7221 on representative data buses. ■ Japanese technical documentation for STANAG 7221 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

Edgewater Inc. (Canada) has standardized the Extended 1553 as STANAG7221. This new technology enables 100Mbps communication using the existing wiring of MIL-STD-1553B. It is compatible with the existing MIL-STD-1553B, allowing communication without mutual interference, while a separate 100Mbps communication channel is secured. It is suitable for programs aimed at enhancing the capabilities of existing aircraft. Adoption is increasing in fixed-wing and rotary-wing aircraft in the U.S. and Europe. Demonstrations are available. ■ Japanese technical documentation for STANAG7221 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

Edgewater Inc. (Canada) has standardized the Extended 1553 as STANAG7221. This new technology enables 100Mbps communication using the existing wiring of MIL-STD-1553B. It can coexist with the existing MIL-STD-1553B without mutual interference, and a separate 100Mbps communication channel is secured. It is suitable for programs aimed at enhancing the capabilities of existing aircraft. Adoption is increasing in fixed-wing and rotary-wing aircraft in the U.S. and Europe. Demonstrations are available. ■ Japanese technical documentation for STANAG7221 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

Edgewater Inc. (Canada) has standardized the Extended 1553 as STANAG7221. This new technology enables 100Mbps communication using the existing wiring of MIL-STD-1553B. It is compatible with the existing MIL-STD-1553B, allowing communication without mutual interference, and a separate 100Mbps communication channel is secured. It is suitable for programs aimed at enhancing the capabilities of existing aircraft. Adoption is increasing in fixed-wing and rotary-wing aircraft in the U.S. and Europe. Demonstrations are available. ■ Japanese technical documentation for STANAG7221 is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Expansion Boards

The MAMBA series consists of 3.3V CMOS devices that provide a host processor and MIL-STD-1553B bus interface. Each IC includes BC, MT, and RT, allowing for simultaneous operation with any combination of 1553 functions. Valid terminals communicate with the MIL-STD-1553 bus via a shared on-chip dual bus transceiver and external transformers. There are four types based on functionality: - HI-6138: BC, MT, RT - HI-6137: BC, RT - HI-6136: MT, RT - HI-6135: RT Users can allocate 16KByte (8K×17Bit words) of on-chip SRAM between devices according to application requirements. The HI-613x communicates with the host via a 40MHz 4-wire SPI. Programmable interrupts provide terminal status to the host processor.

• Other electronic parts

The HI-2130 is a product that combines the functionality of Holt's HI-6130 16-bit parallel bus interface and HI-6131 SPI device, integrating MIL-STD-1553 protocol logic, dual transceivers, and dual transformers into a single compact package. The slim 15×15×4.4mm HI-2130LBxx is one of the world's smallest single-package 1553 terminals with integrated transformers, making it ideal for use in applications such as switched mezzanine cards (XMC) or PCI mezzanine card (PMC) assemblies. The BGA package is available in both RoHS compliant and Sn/Pb options, providing customers with a solution for Sn/Pb assemblies without the need for expensive re-balling.

• Other electronic parts

■Adoption Results ・F-16 – Cockpit display update (HI-6110 adopted) ・A3 Bradley Fighting Vehicle (numerous parts) ・Joint Direct Attack Munition (JDAM) (HI-1567 adopted) ・Commercial use: A-350 flight control (HI-1581 adopted) Additionally, HOLT Corporation holds the world's number one share in ARINC429! The company has over 400 adoption results. ■Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp.

• Dedicated IC

■Adoption Results ・F-16 – Cockpit display update (HI-6110 adopted) ・A3 Bradley Fighting Vehicle (numerous components) ・Joint Direct Attack Munition (JDAM) (HI-1567 adopted) ・Commercial use: A-350 flight control (HI-1581 adopted) Additionally, HOLT Corporation holds the world's number one share in ARINC429! The company has over 400 adoption results. ■Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp.

• Dedicated IC

HOLT's ARINC429 products have the industry's largest lineup, ranging from simple analog bus interface chips like line receivers to protocol ICs with on-chip FIFO and RAM. Additionally, HOLT holds the number one market share for ARINC429 in the world, with over 400 companies having adopted their products. ■ Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• Dedicated IC

The HI-6110 from HOLT is a CMOS IC designed to be installed between a host processor and a dual-redundant MIL-STD-1553 data bus. It contains everything necessary for processing MIL-STD-1553 messages in a small package. Additionally, HOLT holds the number one share in ARINC429 worldwide! The company has over 400 adoption records. ■ Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Other semiconductors

The HOLT HI-6120/6121 is an IC for 3.3V driven MIL-STD-1553 remote terminals. It is available in both 16-bit parallel host interface type and SPI interface type. It can perform message encoding/decoding, error detection, illegal command detection, and data buffering. Additionally, HOLT is the world's number one in ARINC429 market share! The company has over 400 adoption records. ■ Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp.■

• Other semiconductors

HOLT's HI-1579/1581 offers three types of packages. It holds the heat sink and allows for use even in harsh environmental conditions. Additionally, HOLT is the world's number one in ARINC429 market share! The company has over 400 adoption records. ■ Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• Dedicated IC

The HI-8582/HI-8583 from HOLT is a silicon gate CMOS device designed to be combined with a 16-bit parallel data bus directly connected to the ARINC429 serial bus. Additionally, HOLT holds the number one share in the world for ARINC429! The company has over 400 adoption records. ■ Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp. ■

• Dedicated IC

The HI-8597 is a 3.3V single-supply ARINC 429 line driver equipped with internal lightning protection circuitry. The internal lightning protection circuitry allows compliance with RTCA/DO-160G, Section 22 Level 3. The internal 37.5Ω resistance for each output enables direct connection to the ARINC 429 bus. Additionally, this device includes a dual-polarity voltage doubler, allowing it to operate with just four external capacitors using a single +3.3V power supply. Other features include a high-impedance output (tri-state) when both data inputs are high, enabling multiple line drivers to be connected to a common bus. The bus pin has built-in 8kV ESD input protection (HBM), while all other pins are equipped with 6kV functionality. All logic inputs are compatible with 5V or 3.3V. The HI-8597 line driver is intended for use when there is a need to convert logic signals to ARINC 429 levels, such as when using FPGAs or the HI-3586 ARINC 429 protocol IC.

• Other semiconductors
• Dedicated IC

The HI-8460 and HI-8461 are insulated single ARINC 429 line receivers equipped with internal lightning protection circuits. This device provides 800V isolation between the line receiver and the logic interface. It is an ideal device for protecting the host interface or for systems that require different grounds. While the power supply and ground are isolated between the line receiver and the logic interface, the IC only requires one 3.3V power supply and ground, making the HI-8460 pins compatible with Holt's existing line receivers, HI-8450, HI-8591, and HI-8588. Therefore, this device offers a cost-effective solution for adding galvanic isolation to existing designs.

• Other semiconductors

The HI-35930 from Holt is a CMOS integrated circuit designed to connect SPI-compatible microcontrollers to the ARINC 429 serial bus. This device features two receivers, each with user-programmable label recognition for any combination of 256 possible labels, a 32×32 receive FIFO, three priority label quick access double buffer registers, and an analog line receiver. Both line receivers meet the lightning protection requirements of RTCA/DO-160G, Section 22, Level 3. The independent transmitter includes a 32×32 transmit FIFO and an integrated line driver. The line driver operates on a single 3.3V power supply and includes an on-chip DC/DC converter that generates the bipolar ARINC 429 differential voltage levels necessary to directly drive the ARINC 429 bus. The status of the transmit and receive FIFOs and the priority label buffer can be monitored using a programmable external interrupt pin or by polling the status register.

• Other semiconductors

The Holt HI-3582A/HI-3583A is a CMOS device designed to directly interface a 16-bit parallel data bus with an ARINC 429 serial bus. Compared to the previous HI-3582/HI-3583 products, the HI-3582A/HI-3583A offers a high-speed host CPU interface. This device provides two receivers with label recognition, a 32×32 FIFO, and an analog line receiver. Up to 16 labels can be programmed for each receiver. The independent transmitter includes a 32×32 FIFO and a built-in line driver. The status of all three FIFOs can be monitored using external status pins or by polling the HI-3582A/HI-3583A status register. Other features include a programmable option for the 32nd bit to be either data or parity, and the ability to unscramble 32-bit words.

• Other semiconductors

Holt's ARINC 825 (CAN) controllers come in four types. ■HI-3110 This is a standalone CAN controller with a built-in transceiver. This device provides a cost-effective solution for avionics applications compliant with the CAN 2.0B specification and can be configured to comply with both ARINC 825 and CANaerospace standards. The HI-3110 can transmit and receive standard data frames, extended data frames, and remote frames. The internal transceiver allows for direct connection to the host bus without the need for external components, minimizing board space when combined with the host's SPI. ■HI-3111 This is the digital-only version of the HI-3110. An external transceiver is required separately. ■HI-3112 This model offers an option for a CLKOUT pin instead of a SPLIT pin, which can be used as the main system clock or as a clock input for other devices in the system. ■HI-3113 This provides all options (both CLKOUT and SPLIT pins) in a very compact QFN-44 package.

• Other semiconductors

The HI-8400 is an isolated 4-channel discrete-digital sensor designed to output sensor data via SPI or a parallel bus interface. The isolation provides 800V of separation between each sensor and the logic interface, making it an ideal device for systems that need to accommodate various grounds. Each input can be individually pin-configured as GND/OPEN or 28V/OPEN. The discrete input thresholds comply with Airbus ABD0100H and MIL-STD-704 specifications. This device operates with a digital power supply of 3.3V (±5%) or 5.0V (±5%) for each isolated sensor and a 28V analog power supply. When GND/OPEN mode is selected on its pin, a 1mA wetting current is supplied from the input network of each SENSE input. The wetting current helps prevent dry relay or switch contacts. The sensor output interrupt pin alerts the system to changes in the sensor input, avoiding the need for regular polling via SPI to check the status.

• Other semiconductors

The HI-2579/HI-2581 is a low-power CMOS dual transceiver designed to meet the requirements of MIL-STD-1553/MIL-STD-1760 specifications, featuring an integrated transformer. The dual transceiver with an integrated transformer provides a single-part solution for interfacing protocol ICs or FPGAs to a dual-redundant MIL-STD-1553 bus. This single-package solution significantly reduces footprint and cost, and its low-profile design makes it ideal for applications using cards with height restrictions for components such as PMC and XMC. ■ Japanese technical documentation on MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to view it, please contact sales@nacelle.co.jp. ■

• Other semiconductors

The 3.3V CMOS HI-613x devices provide a complete single or multifunction interface between the host processor and the MIL-STD-1553B bus. It includes BC, MT, and 2×RT, which can be enabled to operate simultaneously in any combination. Users can allocate 64KByte of on-chip SRAM to the device according to application requirements. ■ Host Interface - HI-6130: 16-Bit Parallel Bus - HI-6131: 4-Wire Serial Peripheral Interface (SPI) ■ Japanese technical documentation on the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp.

• Other semiconductors

Holt provides free evaluation boards for each MIL-STD-1553 protocol IC. The standalone evaluation kit consists of two boards: a protocol IC board and an ARM M3 microcontroller board. The kit comes with a pre-written demo program, allowing for immediate demonstration right out of the box. A demo project file for the IAR Systems Embedded Workbench for ARM, which is available for free, is also included, enabling users to modify the program and customize it to their specifications. These boards are separable, allowing the protocol IC board to be connected and used with a familiar microcontroller/FPGA.

• Evaluation Board

The Mini PCIe card can be used in COM Express, PC/104, VPX, notebook, and tablet PC systems. The schematics and layouts can be used in any board design that requires connecting PCI Express to one or more channels of MIL-STD-1553. The HI-2130LBx MIL-STD-1553 terminal is an industry-leading solution that integrates a complete 1553 protocol, optional ECC with 64KByte of shared RAM, dual transceivers, and dual transformers into a compact 15×15 mm square BGA package. Each 1553 channel supports BC, MT, and 2×RT. All 1553 protocol modes can operate simultaneously. The PCI Express interface is designed using the cost-effective Xilinx Artix-7 FPGA. The FPGA source code is also included, allowing for free modifications to the hardware processing to meet requirements.

• Evaluation Board

Holt has announced a MIL-STD-1553 terminal that is compatible with many DDC MIL-STD-1553 terminals in both pin configuration and software register levels. All families provide a complete shape, fit, and functional alternative that allows users to drop in to existing 1553 designs without changing existing board layouts or software.

• Other semiconductors

MilesTek's MIL-STD-1553 connector cables are always in stock as catalog items. We also create custom cables compatible with various connector types not listed in the catalog (such as Trompeter and Raychem) with a short lead time. ■ Japanese technical documentation for the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

We offer box-style couplers and inline bus couplers for MIL-STD-1553. They are compatible with various connector types (Tronpeita, Raychem). ■ Japanese technical documentation for the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

MilesTek's MIL-STD-1553 terminators come with a lineup of standard 78Ω bus terminators as well as stub terminators of 1,000/2,000/3,000Ω. Products with chains for drop prevention are also available. Additionally, there are accessories such as dust caps and adapters for changing connector angles. ■ Japanese technical documentation on the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

MilesTek has both PVC (30-02001) and PFA (Teflon) (M17 / 176-00002) jacketed Twinax cables in stock for laboratory and high-temperature applications, available for quick delivery. ■ Japanese technical documentation for the MIL-STD-1553 communication standard is available. If you would like to see it, please contact sales@nacelle.co.jp ■

• others

This portable PC boasts desktop-level expandability with selectable expansion slots tailored to your needs. It features a robust aluminum construction that is resistant to impacts. You can choose between a battery-operated type or one with a built-in power supply. The power supply type is very portable and does not require an AC adapter.

• Desktop PC

NTP functionality with both server and client capabilities (RFC 5905) and optional support for PTP (IEEE 1588-2008). Commercial GNSS receivers (such as U-Blox), or secure SAASM M-Code GPS receiver data, external 1PPS UTC rollover reference clock, a reference clock with a maximum of 100MHz, and support for amplitude modulation (AM) or DC level shift AM (DCLS) IRIG input as synchronization means via VITA 67.3C backplane RF connectors.

• Embedded Board Computers