MONOVATE(旧：日東金属工業) Product Lineup

Stirring Unit with Jacketed Container for Heating and Cooling【KTTK-J-L】 This is a stirring unit equipped with a jacket for heating and cooling, attached to our stainless steel tank【KTTK】. It is effective not only in stirring and mixing processes that require heating or cooling but also in storage and discharge processes. It comes with a base that allows for the attachment of a clamp-type portable stirrer, making it easy to attach and detach. The drain outlet is located on the side of the container, allowing for shorter piping arrangements, and the bottom plate of the inner tank is sloped, facilitating smooth discharge of contents. The unit is equipped with caster legs, making it easy to move between processes. You can connect a pump for liquid transfer. Specifications can be modified to suit your applications and equipment.

• Stainless steel container

Stainless Steel Container: Stainless Steel and Surface Treatment - Electrolytic Polishing and Fluororesin Coating Manual" Introducing electrolytic polishing and fluororesin coating for stainless steel and stainless steel containers! ● About Stainless Steel We explain SUS304, SUS316, and SUS316L. Our company manufactures containers from these stainless steel plates, primarily providing them to pharmaceutical manufacturers, as well as cosmetics, food, and chemical manufacturing companies. ● About Electrolytic Polishing We introduce the methods for performing electrolytic polishing on the stainless steel (SUS304, SUS316L) we use, as well as the characteristics exhibited by electrolytic polishing. ● About Fluororesin Coating We explain the characteristics of fluororesin coatings and the selection of materials. Characteristics of fluororesin coatings: "Chemical resistance," "Non-stick," "Non-wetting," "Heat resistance," "Cold resistance," "Weather resistance," "Slip properties," "Wear resistance," "Electrical properties." Fluororesin coating materials: "PFA," "FEP," "ETFE.

• Stainless steel container

Nitto Metal Industry Co., Ltd. has installed a jacket on the stainless steel tank [DTM]. By circulating temperature-controlled water or similar fluids through the jacket, it allows for stirring and discharging while maintaining heat or cooling. The tank valve minimizes liquid accumulation, enabling efficient extraction. The absence of dead space improves stirring efficiency. It comes with a base that allows for the attachment of a clamp-type portable stirrer, and the stirrer can be easily removed by taking off the lid. The lid features a split design suitable for checking the contents and adding raw materials. The bottom has a bowl shape, making it ideal for stirring and discharging. The main body is equipped with caster legs, allowing for the movement of the stirrer and contents together with the container. Specifications can be modified to suit different applications.

• Stainless steel container

We have added a base for mounting a stirrer to our stainless steel tank [DT-L]. A clamp-type portable stirrer is attached to the base for use. It features a split lid suitable for checking the contents and adding raw materials. The stirrer can be easily removed by taking off the lid. The bottom has a bowl shape for efficient stirring, and the drain is located in the center of the bottom, allowing for efficient discharge of contents. It comes with caster legs, enabling the entire container to be moved while the stirrer is attached. We also offer the [DTK-J] model with a jacket for heating and cooling. Specifications can be modified to suit your needs.

• Stainless steel container

Stirring Unit with Jacketed Container (Helical) [DTK-J] This is a stirring unit equipped with a jacket for heating and cooling, attached to our stainless steel tank [DTK]. It is effective not only in stirring and mixing processes that require heating or cooling but also in storage and discharge processes. It comes with a base that allows for the attachment of a clamp-type portable stirrer, making it easy to attach and detach. The drain is located at the center of the bottom of the dish, allowing for smooth discharge of contents. The main body is equipped with caster legs, enabling the stirring machine and contents to be moved together with the container. Specifications can be modified to suit different applications and equipment.

• Stainless steel container

This is a stirring unit with a mirror bottom that has converted the bottom drain of our stainless steel tank [DTK] into a tank valve. Thanks to the tank valve, there is almost no liquid accumulation, allowing for efficient extraction. The absence of dead space improves stirring efficiency. It comes with a base that allows for the attachment of a clamp-type portable stirrer, and the stirrer can be easily removed by taking off the lid. The lid is a split type suitable for checking the contents and adding raw materials. The bottom has a bowl shape, making it ideal for stirring and discharging. The main body is equipped with caster legs, allowing for the movement of the stirrer and contents together with the container. We also offer the [DTM-J] with a jacket for heating and cooling. Specifications can be modified to suit your application.

• Stainless steel container

A stainless steel general-purpose tank [ST] and a lever band type sealed tank [CTL] have been equipped with a jacket. - By circulating hot or cold water through the jacket, it is possible to store contents while heating or cooling them. - This stainless steel tank is ideal for temporary storage of liquids, etc. It is resistant to rust and can be reused, making it suitable for various fields such as pharmaceuticals, cosmetics, food, and chemicals. - The corners of the bottom are designed with an R structure, making it difficult for dirt to accumulate, which enhances cleanliness and hygiene. - For moving the stainless steel tank, a separately sold stainless steel container cart (KM series) can be used. - Depending on the application, you can choose the lid, and custom processing allows for the installation of fittings for charging or equipment connection on the lid, or it can be made with a split lid. * Nitto Metal Industry's stainless steel tanks can be custom processed according to applications, such as "dimensions," "materials," and "additional nozzles."

• Stainless steel container

A jacket has been attached to the tapered stainless steel tank [KTT]. - By circulating hot or cold water in the jacket section, it is possible to store contents while heating or cooling them. - The discharge outlet is located on the side of the container, allowing for shorter piping arrangements, and the inner tank has a sloped bottom, making it easy to discharge the contents. - The corners of the bottom are designed with an R structure, which makes it difficult for dirt to accumulate, resulting in good cleanability and hygiene. - For moving the stainless steel tank, it is convenient to use a dedicated stainless steel cart (KM series). - The included lid can be fitted with an inlet or equipment connection fitting according to the application, or it can be made into a split lid. - A pump can be connected for liquid transfer. * Nitto Metal Industry's stainless steel tanks can be custom processed to suit applications such as "dimensions," "materials," and "additional nozzles."

• Food storage equipment and facilities

A jacket has been installed on the hopper-type stainless steel tank [HT]. - By circulating hot or cold water in the jacket section, liquid raw materials can be heated or cooled while being fed into equipment or large containers. - The bottom plate of the inner layer has a funnel (conical) shape, which is particularly effective for liquid discharge. - As it is made to order, this discharge container can be custom processed to suit specific applications, such as "dimensions," "materials," and "additional nozzles." - The lid can also be selected according to the application. It can be fitted with joints for feeding or equipment connection, or designed as a split lid.

• Stainless steel container

- A jacket has been attached to the legged tapered stainless steel tank [KTT-L]. - By circulating hot or cold water through the jacket, the contents can be stored and discharged while being heated or cooled. - Since the drain outlet is located on the side of the container, the piping can be kept short, and the bottom plate of the inner tank is sloped, allowing for smooth discharge of the contents. - The caster legs make it easy to move between processes. - The lid can be selected according to the application, and custom processing allows for the addition of fittings for charging or equipment connection, or it can be made as a split lid. - A pump can be connected for liquid transfer. - Customization options are available for changes in container material, finish, dimensions, and more.

• Stainless steel container

A jacket has been installed on the legged hopper-type stainless steel tank [HT-L]. - By circulating hot or cold water in the jacket section, it allows for the storage and discharge of liquid raw materials while heating or cooling them. - The bottom plate of the inner tank has a funnel (conical) shape, making it an excellent tank for discharge. - It is easy to move between processes due to the caster legs. This stainless steel container can be custom processed (customized) according to applications such as "dimensions," "materials," and "additional nozzles."

• Stainless steel container

A stainless steel tank with a footed mirror plate type "DT-L" has been equipped with a jacket. - By circulating hot or cold water in the jacket section, it allows for the storage, stirring, and discharge of liquid raw materials while heating or cooling them. - The bottom plate has a mirror bottom shape, which provides excellent stirring and discharge properties (especially for liquids). - The drain is located at the very bottom of the mirror bottom, allowing for complete discharge of the internal solution without any residue. - It is equipped with caster legs, making movement between processes smooth. - Changes to the material, finish, and dimensions of the container are also possible.

• Stainless steel container

This is an all-stainless steel beaker. It uses SUS316L material, which has excellent corrosion resistance, not only in the parts that come into contact with liquids but throughout the entire container. Being made of stainless steel, it can be reused, making it economical. Compared to our stainless steel beaker [BK], the handle is attached with seamless welding all around, preventing foreign substances and cleaning solutions from accumulating, resulting in a hygienic sanitary structure. The large spout is not only convenient for pouring contents but also designed to minimize drips, enhancing work efficiency. It is used in various fields, including experiments and production lines in pharmaceutical manufacturers.

• Stainless steel container

Stirring Vessel with Jacket and Mirror Plate (Tank Bottom Valve) [DTM-J] This is a stirring vessel equipped with a jacket for heating and cooling, attached to our stainless steel tank [DTM]. The bottom has a bowl shape, making it effective in the stirring and discharge processes. A clamp-type portable stirrer can be attached to the main body, and there are no dead spaces inside the vessel, resulting in efficient stirring. The tank valve at the bottom allows for complete discharge without residue. The lid is a split type, suitable for checking the contents and adding raw materials, and can be easily removed to detach the stirrer. With caster legs, the stirrer and contents can be moved along with the vessel. Specifications can be modified to suit specific applications.

• Stainless steel container

This is a catch-clip type storage container that replaces the silicone packing included with our stainless steel tank [CTH] with PTFE packing, enhancing chemical resistance, solvent resistance, and oil resistance. Due to the stainless steel tank, it is resistant to rust and can be reused multiple times. It has a handle for smooth transportation and movement when using a dedicated cart (KM series). The corners of the bottom are designed with an R structure, making it difficult for dirt to accumulate, which improves cleanability and hygiene.

• Stainless steel container

Identification and management can be done using the color of the packing, allowing for differentiation with colored packing in cases where the contents may transfer odors to the packing. Due to the color, it is easier to detect if the packing is chipped and has mixed into the contents. The packing comes in four colors (red, blue, green, and white) and is attached to the rim of the container for use. It is ideal for temporary storage of powders and liquids that are sensitive to moisture and outside air, as it is a sealed stainless steel tank. With a handle, it allows for smooth transportation and movement when using a dedicated cart (KM series). The corners of the bottom have an R structure, making it difficult for dirt to accumulate, resulting in good washability and hygiene.

• Stainless steel container

We have attached a padlock to our stainless steel airtight container [CTL]. The stainless steel container is resistant to rust and can be reused multiple times. You can lock it simply by inserting the key into the hook hole of the included lever band. By locking it, you can prevent unauthorized access and use of the contents, allowing for better management of the contents, as well as preventing the lever band from falling off during transport. It has a handle for smooth transportation, especially when using a dedicated cart (KM series). The corners of the bottom are designed with an R structure, making it difficult for dirt to accumulate, which enhances its cleanliness and hygiene. Empty containers can be stacked, saving space.

• Food storage equipment and facilities

The body of the lever band type stainless steel airtight container [CTL] has been ribbed. It can be sealed with a single touch using the included lever band, preventing the scattering of contents and the intrusion of foreign substances such as dust. Made of stainless steel, it is resistant to rust and can be reused repeatedly, and the ribbing provides greater strength compared to standard products. The width and position of the ribs can be determined as desired. When the inverted lifter is installed, the ribs act as a non-slip feature, making it an inverted discharge container when used in conjunction with the discharge chute [HTL].

• Stainless steel container

This is a sealed stainless steel tank that is optimal for temporary storage of powders, liquids, and other materials that are sensitive to humidity and outside air. By placing a gasket between the container and the lid and tightening it with a catch clip, it prevents the scattering of contents and the intrusion of foreign substances such as dust. Made of stainless steel, it is resistant to rust and can be reused, making it suitable for various fields including pharmaceuticals, cosmetics, food, and chemicals. It features a handle for easy transport and smooth movement when using a dedicated cart (KM series). The bottom corners have an R structure, making it difficult for dirt to accumulate, thus ensuring good cleanability and hygiene. The gasket is attached to the edge of the container (for containers over 150L, it is of the type that fits into the lid).

• Stainless steel container

This is a sealed stainless steel tank that is optimal for temporary storage of powders and liquids that dislike humidity. Made of stainless steel, it is resistant to rust and can be reused multiple times. The included lever band allows for one-touch sealing, preventing spillage of contents and contamination from dust and other foreign substances, making it suitable for various fields such as pharmaceuticals, cosmetics, food, and chemicals. It features a handle for easy transportation and smooth movement when using a dedicated cart (KM series). The bottom corners have an R structure, making it difficult for dirt to accumulate, which enhances its cleanability and hygiene. Empty containers can be stacked without taking up much space (stacking is not possible for containers over 150L).

• Stainless steel container

It is used in processes such as transportation, movement, and loading of contents. Of course, it is also ideal for temporary storage and storage of powders and liquids, featuring a suspended handle (hook) made of stainless steel. The sealed type [CTB] is a sealed container, which prevents the scattering of contents and the intrusion of foreign substances such as dust. It can be easily sealed with a clip. The general-purpose type [STB] comes with a cover and is easy to handle, making it a standard tank. It is used in various applications. Nitto Metal Industry's stainless steel tanks have a rounded corner design at the bottom, making them less likely to accumulate dirt, easy to clean, and hygienic! Stainless steel tanks are resistant to rust and can be reused, making them suitable for various fields such as pharmaceuticals, cosmetics, food, and chemicals. A dedicated cart (KM series) is available for use.

• Stainless steel container

This is an introduction to the lids for stainless steel tanks from Nitto Metal Industry Co., Ltd. There are mainly four types in the lineup. ○ Stock Lid [SF] This is the lid for ST/STB containers. It is a cover type and is common. ○ Flat Lid [HF] This is the lid for ST/STB containers. It is a cover type and is mainly used for larger capacities. ○ Sealing Lid [MF] This is the lid for CTH/CTB containers. This lid is used for catch clip type sealed containers. ○ CTL Lid [CF] This is the lid for CTL containers. This lid is used for lever band type sealed containers.

• Stainless steel container

It is ideal for storing powders that dislike humidity. It is a bottle (container) with excellent airtightness, tightened with a clamp band. You can choose the diameter and gasket according to the application and contents. Made of SUS316L material, it has excellent corrosion resistance. The cap has a handle, making it easy to open and close. Customization options are available for changing the capacity, handle shape, and surface treatments such as electropolishing!

• Other laboratory equipment and containers

This is a stainless steel tank made of SUS316L, ideal for temporary storage of powders, liquids, and more. Being made of stainless steel, it is resistant to rust and can be reused repeatedly. Compared to SUS304, it has superior corrosion resistance to hydrochloric acid, strong acids, and strong alkalis, as well as excellent resistance to pitting corrosion in seawater and intergranular corrosion near welded areas. The corners of the bottom are designed with a rounded structure, making it hygienic and preventing dirt accumulation. It comes with a handle or a hanging handle (hook) for smooth transportation and movement when using a dedicated cart. A lid made of SUS316L is included.

• Stainless steel container

Specialized stainless steel container manufacturer, Nitto Metal Industry Co., Ltd. Our company has a wealth of experience not only in standard containers but also in custom manufacturing! Here, as just one example, we showcase frequently ordered processing cases such as nozzle (fitting) processing, handle processing, and leg processing! We can design and manufacture completely custom-made products from a single item to meet the type and use of the contents, as well as surrounding equipment and facilities! If you have any of the following needs: - What you are looking for is not available in commercial products - You have been turned down by other companies for manufacturing - You want specifications tailored to your equipment Please feel free to consult with us! We can also manufacture not only containers but also lids, tools, and parts!

• Stainless steel container

Nitto Metal Industry Co., Ltd., a manufacturer specializing in stainless steel containers! We have a proven track record of supplying to pharmaceutical manufacturers, chemical manufacturers, and cosmetic manufacturers! Our stainless steel containers are active in a wide range of fields! Lids for stainless steel containers can also be completely custom-made from a single item according to customer needs. With many years of manufacturing experience and a wealth of expertise, we design and produce specifications tailored to applications, contents, processes, equipment, piping, and more!

• Stainless steel container

This is a transport cart specifically designed for Nitto Metal Industry Co., Ltd.'s stainless steel taper tanks (TP-ST/TP-CTH/TP-CTL). The cart is made of stainless steel, making it resistant to rust and hygienic. The 43 and 47 sizes are lightweight plate types, while the 565 and 565H sizes are angle types focused on strength. It comes with four swivel casters, two of which have brakes, allowing the cart to be secured in place. The wheels of the "KM-TP" are rubber, while the wheels of the "KMS-TP" are made of polyurethane, which minimizes wheel marks and is less likely to damage floors, making it ideal for clean rooms. Custom processing and changes in wheel material are possible!

• Trolley

This is a silicone packing that can be used for stainless steel containers from Nitto Metal Industry Co., Ltd., such as the catch-clip type airtight container "CTH," the hanging type stainless steel airtight container "CTB," and the lever band type airtight container "CTL."

• Stainless steel container

- Made of all stainless steel, it is resistant to rust, sturdy, and hygienic. It is ideal for use in production lines and laboratories in pharmaceuticals, cosmetics, chemicals, food, and more. - It has a large pouring spout, making it convenient to open the contents. - It has a handle, making it easy to lift. The 10L and 20L models come with dual handles for a secure grip. - The 1 to 5L models have measurement markings, making it convenient to check the remaining contents. - It is also possible to create completely custom-made beakers according to customer requests!

• Stainless steel container

○ Stainless Steel Bucket (with Spout) 【BA】 - This stainless steel bucket is made entirely of stainless steel, making it resistant to rust, hygienic, and suitable for various uses. It features an easy-to-hold handle and a large spout for convenient pouring. - The rounded edge at the top of the bucket prevents dirt from accumulating and ensures that contents do not remain inside. - Made of SUS304, it is used across a wide range of industries including pharmaceuticals, cosmetics, chemicals, and food. - Available in three capacities: 10L, 15L, and 20L. A separately sold dedicated lid can prevent dust and other contaminants from entering. (Lid for Stainless Steel Bucket 【BAF】) ○ Lid for Stainless Steel Bucket 【BAF】 - Equipped with a handle for easy opening and closing, it prevents dust and other contaminants from entering the bucket. - Made entirely of stainless steel SUS304, it is easy to handle. Please choose the size that fits your stainless steel bucket.

• Stainless steel container

○All Stainless Steel This is a stainless steel bat made of SUS304. It is ideal for use in laboratories and factories in the pharmaceutical, chemical, cosmetics, and food industries. ○Rounded corners! The edges are rounded to prevent residue from accumulating (R processing). ○Wide variety of sizes & custom processing available! In addition to a wide range of sizes, custom processing can be done to any dimensions due to sheet metal processing. Examples: - Custom sizes to fit equipment or machinery - Punching processing - No edge rolling - Adding a flange to the edge - Increasing depth - Adding handles - Changing finishes (electropolishing, fluororesin coating, etc.) - Manufacturing specialized lids etc...

• Stainless steel container

- Both the cup and handle are made of all stainless steel. The handle is made of stainless steel, making it sturdier and more durable than wooden handles. Due to the stainless steel, it is resistant to rust and hygienic. High-quality all stainless steel ladles are used in a wide range of industries, including pharmaceuticals, chemicals, cosmetics, and food. - There are no gaps due to full circumferential welding. The connection between the cup and handle is fully welded, leaving no gaps, preventing the accumulation of contents or cleaning solutions, making it hygienic and easy to clean! - It has a spout. The cup features a spout, making it convenient for portioning out the right amount. - Length can be selected. The handle length can be chosen from three different options. - Custom-made production is available. - Electropolished finish (improves corrosion resistance and cleanability) - Adding a hook to the handle for hanging - Customizing the handle length to the desired length etc...

• Food Conveyor Equipment

By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder or granular material can be discharged (or loaded). It can be used as a discharge chute when using an inversion lifter. It is easy to handle due to its thin and lightweight design. Specifications can be modified according to the application.

• Stainless steel container

These are optional parts specifically for our stainless steel airtight containers (catch clip type) "CTH" and hanging airtight containers "CTB." They will be installed by welding. Once installed, it will allow the "CTH/CTB," which cannot be stacked due to its structure, to be stacked, thereby saving space.

• Stainless steel container

● This is a stainless steel tank with a sloped bottom towards the discharge outlet. ● The slope allows for smooth discharge of the contents. ● Since the discharge outlet is located on the side of the container, piping can be arranged more compactly. ● There are three types available: the KTT-ST with a cover lid, the KTT-CTH with a catch clip sealing type, and the KTT-CTL with a lever band sealing type. ● If placed on a separately sold stainless steel container cart (KM series), moving between processes becomes easy. ● Immediate delivery available! (20L, 35L, 65L, 100L, 150L, and 200L are in stock.) Specifications can be modified according to your needs.

• Stainless steel container

We have attached legs to our stainless steel container "KTT." The bottom has a slope towards the discharge outlet, allowing for smooth discharge of contents. With the legs, the container can be moved between processes. Since the discharge outlet is located on the side of the container, piping can be arranged more efficiently. There are several types available: KTT-ST-L with a cover lid, KTT-CTH-L with a catch clip type sealing, and KTT-CTL-L with a lever band type sealing. We also offer the KTT-J-L, which comes with a jacket for insulation or cooling. Specifications can be modified to suit your needs. You can connect a pump for liquid transfer.

• Stainless steel container

This is a stainless steel tank used as a temporary receiving container attached to equipment or large containers between raw material input and processes. The bottom is designed as a hopper, providing excellent discharge capability. The junction between the body and the hopper has an R structure, preventing dirt and contents from accumulating, ensuring hygiene. There are also models with a jacket, the 【HT-J】, and with caster legs, the 【HT-L】. Specifications can be modified to suit different applications.

• Stainless steel container

We have added legs to our stainless steel tank [HT]. Since the legs are equipped with casters, the container can be moved between processes. A separate container for receiving (portioning) can be placed under the hopper container. The bottom has a funnel (conical) shape, which provides excellent discharge capability. The boundary between the body and the hopper has an R structure, preventing dirt and contents from accumulating, making it hygienic. We also have the jacketed model [HT-J-L]. Specifications can be changed according to your needs.

• Stainless steel container

- The bottom of the container has a mirror-like shape that makes it easy to clean. - Due to the mirror-like shape, it is suitable for stirring with a hand mixer. - Due to the mirror-like shape, it is suitable for extracting contents with a hand pump. - Specifications can be changed to suit the application and equipment.

• Food storage equipment and facilities

This is a stainless steel tank with a bowl-shaped bottom (mirror plate). It has a drain in the central area where the contents gather, allowing for smooth discharge. With caster legs, the entire container can be moved between processes, and a separate container for receiving (portioning) can be placed under the drain. The mirror bottom has no corners, making it suitable for stirring operations. There are three types available: the cover lid type [DT-ST-L], the catch clip sealed type [DT-CTH-L], and the lever band sealed type [DT-CTL-L]. Specifications can be modified according to the intended use.

• Stainless steel container

This is a water jug-type container with a stainless steel ball valve attached to our stainless steel general-purpose container [ST] and sealed container [CTH]. It is ideal for dispensing liquids into beakers or supplying water to equipment. Since both the container and valve are made of stainless steel, they are resistant to rust and hygienic. The valve is sealed with PTFE, providing excellent chemical and solvent resistance. The nozzle tip has a threaded joint, allowing for connection with couplers and other fittings. There are two types available: the cover-type [STV] and the sealed-type [CTHV]. The CTHV is a sealed container, preventing spills during transport. Equipped with a handle, it allows for smooth transportation, especially when using a dedicated cart (KM series). (The cart and nozzle do not interfere!) Additionally, there are outlet types with a faucet design, [ST-W] and [CTH-W]. At Nitto Metal Industry Co., Ltd., we offer custom solutions, including the addition of scales, surface treatments (electropolishing, coating), and dimension changes, allowing for fully customized production from a single item! Please feel free to contact us for more details!

• Stainless steel container

We have installed a faucet with a side water tap on our stainless steel tanks 【ST】 and 【CTH】. This is a water jug type stainless container that allows for easy dispensing and filling of contents from the container to beakers, simply by turning the faucet. The container is made of stainless steel, which is resistant to rust, and the faucet can be removed for cleaning, ensuring hygiene. It has a handle for smooth movement and transportation. The 【CTH-W】 is a sealed container, making it ideal for temporary storage of contents that dislike exposure to outside air and humidity, as it prevents spills during transport. We also offer custom options such as changing the material of the gasket, altering the faucet installation position, and installing level gauges! Please feel free to consult with us!

• Stainless steel container

This is a transport cart specifically designed for Nitto Metal Industry Co., Ltd.'s straight tanks (ST/CTH/CTL/STB/CTB). The cart is made of stainless steel, making it resistant to rust and hygienic. The sizes 30 to 47 are lightweight dish types, while sizes 565 to 77H are angle types focused on strength. It comes with four swivel casters, two of which have brakes to secure the cart in place. The caster wheels are made of SS rubber. Custom manufacturing and wheel changes are possible. Please contact us for more details!

• Trolley

This is a dedicated cart for stainless steel tanks (ST/CTH/CTL/STB/CTB) from Nitto Metal Industry Co., Ltd. The cart and casters are made of stainless steel, making them resistant to rust. Additionally, the nylon urethane wheels do not damage the floor and are less likely to leave marks, which is why they are widely used in clean rooms. Sizes 30 to 47 are lightweight dish types, while sizes 565 to 77H are angle types focused on strength. The cart comes with four swivel casters, two of which have brakes to secure the cart in place. Custom orders are available! We can accommodate notches, drainage holes, wheel changes, and more. Please feel free to contact us for more details!

• Stainless steel container

This is a dedicated cart for our straight tanks (ST/CTH/CTL/STB/CTB). It uses conductive wheels to prevent disasters caused by static electricity. With excellent conductivity, it removes static electricity and prevents dust adhesion, making it suitable for clean rooms. The cart is made of stainless steel, which is resistant to rust and hygienic. Sizes 30 to 47 are lightweight plate types, while sizes 565 to 77H are angle types focused on strength. It comes with four swivel casters (two conductive wheels and two rubber wheels with brakes) that allow the cart to be secured in place. Custom processing and material changes are possible!

• Stainless steel container