MONOVATE(旧：日東金属工業) Product Lineup

- There is no need to hold the hose during water injection or when pouring liquid materials. - You can perform other tasks while injecting water, which improves work efficiency. - It prevents losses caused by the hose falling or scattering due to the hose flailing. - You can choose the type of bracket according to your application. - We also offer fittings that can be attached to the end of the hose as an option. - If you want to avoid metal contact with the container, please choose the series with pads.

• hose

This is a container designed to quickly filter the solution or other materials introduced into it by creating a reduced pressure inside the container. By sucking out the air from the container through the suction port on the lid, the inside is brought to a reduced pressure state. By creating a vacuum inside the container, the solution introduced into the hopper is quickly sucked in and filtered. The feature is that it can filter much faster due to suction rather than relying on its own weight. Liquid is filtered through a catch net located between the hopper at the top of the container and the container itself. The opening rate of the hopper and catch net can be adjusted according to your preferences. Inside the outer container, which can be easily opened with a catch clip, there is an inner container. The inner container has a hanging handle, and it weighs about 1/2 to 1/3 of the outer container, making it easy to extract liquids and reducing the burden on the operator. Since this product is made entirely of stainless steel, unlike glass filters, there is no concern about breakage of the container, associated injury accidents, or contamination by foreign substances. By removing the hopper and closing the ferrule part to create a reduced pressure, it can also be used for simple vacuum degassing. In addition to the container body (outer container and inner container), a vacuum gauge is included.

• Filtration Equipment

〇 "Bernoulli Flow Stirrer" that can suppress foaming and air incorporation during mixing We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the time required for dissolution by 30%!" The "Bernoulli Flow Stirrer" can be selected according to usage, including models suitable for use under sealed conditions, in explosion-proof areas, and cost-effective models. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and blending without temperature control or pressure adjustments. - Bernoulli Flow Stirring Temperature Control Unit A unit equipped with a jacketed container that can handle heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that must avoid contact with air and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can create from just one unit.

• tank

A unit with a stainless steel container equipped with a weighing function. The frame comes with a base for installing a mixer. Unit contents: Stainless steel container, mobile frame, load cell, control panel. It can be used in various ways linked to "weighing": - Measuring the amount during raw material input - (In combination with an automatic valve) precise input and discharge of raw materials - (In combination with an automatic valve and mixer) precise input of mixing materials, mixing, and precise discharge The weight is measured using the load cell attached to the frame. The measurement results can be checked on the monitor of the control panel. It is designed to minimize measurement errors even when the container is shaking due to mixing, etc. The shape of the container is a dished type that excels in mixing efficiency. The container and frame can be separated, allowing the container to be removed for cleaning. *The photo is for illustration purposes. The actual specifications will be designed according to the customer's usage.

• Weighing Machine

〇 "Bernoulli Flow Stirrer" that can suppress foaming and air incorporation during mixing We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the dissolution time by 30%!" The "Bernoulli Flow Stirrer" can be selected based on usage, including models suitable for use under sealed conditions, in explosion-proof areas, and cost-effective options. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and blending without temperature control or pressure adjustment. - Bernoulli Flow Stirring Temperature Control Unit A unit equipped with a jacketed container that can handle heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that should not come into contact with air and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can create from just one unit.

• tank

〇 "Bernoulli Flow Stirrer" that suppresses foaming and air incorporation while stirring We have received positive feedback from pharmaceutical manufacturers who have adopted our product, stating, "We were able to reduce the time required for dissolution by 30%!" The "Bernoulli Flow Stirrer" can be selected according to usage, including models that can be used under sealed conditions, models suitable for explosion-proof areas, and cost-effective models. 〇 "Bernoulli Flow Stirring Unit" Leveraging our strengths as a manufacturer of stainless steel containers and stirrers, we offer stirring devices suitable for various applications. These compact stirring devices are ideal for prototype development and small-batch production, ranging from 35L to 200L. - Bernoulli Flow Stirring Unit A simple unit specialized for stirring and mixing without temperature control or pressure adjustment. - Bernoulli Flow Stirring Temperature Control Unit A unit with a jacketed container that can accommodate heating for dissolution, temperature uniformity, and cooling. - Bernoulli Flow Stirring Pressure Unit A unit with a pressure vessel and Bernoulli flow stirrer designed for stirring that requires avoiding air exposure and involves defoaming. 〇 Custom Orders Welcome! We are a manufacturer skilled in custom production! We can manufacture from just one unit.

• Mixer/agitator

A cover lid that can be opened and closed halfway / airtight lid. The lid is divided in half and connected with hinges for easy opening and closing. The opening is wide, making it easy to work with. Available with 1S and 1.5S handles. The size and type of fittings can be changed. *This product is designed to fit stainless steel containers made by Nitto Metal Industry.

• Stainless steel container

A cover lid that can be opened and closed halfway / airtight lid. It has a notch for a stirrer. The lid is divided in half and connected with hinges for easy opening and closing. The opening is wide for easier operation. It comes with a 1S and 1.5S helix. Baffles and temperature sensors can be connected. The size and type of fittings can be changed. *This product is designed to fit stainless steel containers made by Nitto Metal Industry.

• Stainless steel container

A cover lid that can be partially opened and closed / a sealed lid. The opening has no fasteners, allowing it to be opened immediately when needed. It is recommended for high-frequency opening and closing. Joints and notches can be added optionally as desired. *This product is designed to fit stainless steel containers made by Nitto Metal Industry Co., Ltd.

• Stainless steel container

The "Bernoulli Flow Stirrer" excels in agitation while minimizing foaming. It is a MONOVATE original stirrer characterized by "low foaming" and "powerful" stirring. If you are struggling with "foaming" or "insufficient stirring" in processes such as resin dissolution, chemical mixing, or paint stirring, please consider this stirrer. Customers who have adopted the Bernoulli Flow Stirrer have reported, "We were able to reduce the time required for dissolving raw materials by 30% (pharmaceutical manufacturer)." The Bernoulli Flow Stirrer comes in a wide range of options tailored to various applications, including cost-effective types and those with adjustable pressure. We also offer demo experiments for those who wish to confirm specifications before purchasing. As a manufacturer of stainless steel stirring tanks, we will select stirrers considering compatibility with tanks and contents. If you have any questions about which stirrer is suitable, please feel free to consult us.

• Mixer/agitator

◆We solve these problems with stainless steel hoppers! "Poor usability," "Size doesn't fit," "Contents don't flow out smoothly." ◆Here’s what sets our stainless steel hoppers apart "You can specify the height." You can specify the height of the hopper body and the leg height in 10mm increments. This allows you to choose according to the installation location and work content, leading to increased work efficiency. "You can choose the discharge outlet." You can select fittings (such as unions, sockets, nipples, flanges) that match the connection destination. This prevents issues where the "type of fitting differs" or the "size of fitting differs" from the connection destination. "You can choose the hopper angle." You can choose the hopper angle from 45° (eccentric), 60°, or 90°. The hopper angle can affect the flowability of the contents, and selecting the hopper angle according to the contents can lead to improved workability, time savings, and stable quality. For more details, please refer to the PDF.

• Stainless steel utensils and containers

- When introducing lightweight and easily airborne powder, it is installed at the top of the receiving container. - This reduces cleaning time after powder introduction and improves the hygiene environment of the workspace. - A large hood efficiently collects dust. The hood can be connected to a dust collector (sold separately). - By replacing the receiving container, it can accommodate multiple containers. - It is made of stainless steel, which is resistant to rust and hygienic. - It comes with caster legs for smooth movement and setup. The DC-L is designed based on the height of our containers placed on the floor. The DC-LH is designed based on the height of our containers placed on our carts. When using other manufacturers' containers, carts, or drums, please check the inner diameter and height of the hood and use one that fits. *Custom manufacturing is also possible.

• Stainless steel utensils and containers

This is a PDF document summarizing the product lineup of sight glasses manufactured by Nitto Metal Industry, which are used as sight glasses mounted on stainless steel tanks. It introduces a total of 13 types of products with both hose connection (NMB series/NM series) and flange connection. Additionally, it showcases custom-made sight glasses. Various specifications can be changed, such as size and material, so please feel free to contact us.

• Stainless steel utensils and containers

Stainless containers are characterized by their resistance to rust. Environments that use such stainless containers often have high hygiene standards and robust measures against foreign matter contamination. The PDF document introduces "measures against foreign matter contamination that can be implemented around stainless containers in the storage and input processes." Please feel free to download and take a look.

• Stainless steel utensils and containers

Stainless steel containers used in high hygiene grade locations. In such environments, measures against foreign matter contamination are often a focus. This PDF document introduces "measures against foreign matter contamination that can be implemented around stainless steel containers during mixing and cleaning processes." Please feel free to download and take a look.

• Stainless steel utensils and containers

A stirring temperature control unit is a stirring device that can stir while maintaining the temperature of the contents by circulating a heat transfer medium in the jacket (outer tank) of a stainless steel container. Nitto Kinzoku Kogyo offers custom-made stirring temperature control units based on a combination of stainless steel containers, stirrers, and temperature control devices (such as heaters and circulation systems), tailored to the purpose, contents, and customer preferences, starting from just one unit. It is also possible to manufacture units with the assumption of combining them with your existing stirrers or temperature control devices. This case study collection introduces some examples of stirring temperature control units that have been delivered so far. You can view it immediately by downloading the PDF.

• Stainless steel container

There are various models of mixers released by different manufacturers, and it is often thought, "There are too many types, I don't know which one is good!" "Will it mix properly?" "How do I buy one?" This PDF document introduces tips for choosing a mixer that you should know when purchasing one, as well as how to buy a mixer. It is recommended for those who are in charge of purchasing a mixer for the first time and for those who are considering getting a mixer.

• Mixer/agitator

In recent years, the trend of automation (robotization/factory automation) has accelerated in pharmaceutical and cosmetic factories. At our company, we have seen an increase in custom orders for stainless steel containers from customers who want to use them on automated production lines. By customizing stainless steel containers to match the equipment and work processes, we can fully utilize the performance of the equipment and solve process-related issues. This explanatory document introduces recommended customizations and products for stainless steel containers to be introduced into automated processes.

• Stainless steel container

When using stainless steel containers, you may think things like, "I want to make this task easier," "I want to eliminate dangerous parts," or "I want to prevent injuries during work." In this document, we will introduce safety measures that can be achieved through "slight customization" of our products. By using stainless steel containers tailored to the specific tasks, you can improve work efficiency and help prevent injuries.

• Stainless steel container

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a food manufacturer. A 400L stainless steel jacketed container was equipped with a stirrer, pump, and level sensor. Hot water is circulated within the jacket using a temperature control unit to maintain the internal solution at a constant temperature. The container, pump, and control panel are mounted on a single cart for easy mobility. 【Case Overview】 - Connect an external temperature sensor to the temperature control unit to manage the temperature of the internal solution, and use the stirrer to ensure uniform temperature throughout the solution. - By using an ultrasonic level sensor, the level can be measured without contact with the internal solution. - The pump is used for transferring liquid to the next process. - The control panel manages the ON/OFF operation and speed adjustment of the pump and stirrer, as well as displays the liquid level. *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. This is a jacketed stirring container with a cart, and the air motor is designed to be explosion-proof and difficult to ignite. The cart's basin is equipped with a discharge outlet for draining accumulated liquid during container cleaning. 【Case Overview】 - The contents are heated by the jacket while being mixed by the air motor stirrer. - The air motor is explosion-proof and difficult to ignite. - A full-bore ball valve attached to the drain allows for smooth discharge of the contents. - The cart's basin has a discharge outlet for draining accumulated liquid. - The cart with a handle facilitates easy movement between production equipment. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed through "PDF Download."

• Mixer/agitator

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. Raw materials are loaded through a top-opening lid and discharged from the bottom to the manufacturing equipment at the destination. The frame is equipped with handles, movable casters, and brackets for a stirrer, and at the top, there are temperature sensors and a ferrule for introducing chemicals. 【Case Overview】 ■ A jacket is attached to the bottom container to stir and mix chemicals at a constant temperature. ■ The frame includes handles, movable casters, and brackets for a stirrer. ■ Temperature sensors and a ferrule for introducing chemicals are arranged at the top. *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

We would like to introduce a case where a custom pressure vessel was manufactured at the request of a pharmaceutical manufacturer. This vessel is designed to dissolve powders and liquids, degas, and transfer the contents to other equipment. The internal state of the vessel can be checked through a viewing window, which is equipped with a light for illumination and a wiper. 【Case Overview】 - Powder materials are gradually added to the liquid inside the vessel from an eccentric hopper with a butterfly bubble. - The added contents are heated with warm water circulated through a jacket. - The heated contents are mixed using upper and lower stirrers. - Bubbles formed during stirring are degassed under reduced pressure. - The resulting solution is transferred to other equipment through a tube strainer. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Mixer/agitator

We would like to introduce a case where we manufactured a custom pressure vessel at the request of a pharmaceutical manufacturer. This is an intermediate container in the injection drug manufacturing process, featuring a filter case that removes impurities from the drug solution. The clamp screw of the ferrule has a surface treatment to prevent galling, and the inner surface is electropolished to avoid contamination from the surface and provide a high level of corrosion resistance. 【Case Overview】 ■ Filter case for removing impurities from the drug solution ■ Equipped with a viewing window to check the condition of the filter ■ The clamp screw of the ferrule has a surface treatment to prevent galling ■ The inner surface is electropolished to avoid contamination from the surface and provide a high level of corrosion resistance *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Mixer/agitator

We would like to introduce a case where we manufactured a custom pressure vessel at the request of a chemical fiber manufacturer. This is a jacketed stirring vessel with a cart that allows for the introduction of chemicals without exposure to the outside air. After stirring and degassing under reduced pressure, the chemicals are pumped from the bottom of the tank. The cart designed specifically for in-factory equipment has narrow caster widths, and small casters are added for rollover prevention. 【Case Overview】 - Chemicals are introduced without exposure to the outside air, stirred, and after degassing under reduced pressure, the chemicals are pumped from the bottom of the tank. - The chemicals after stirring and degassing are transported to the manufacturing equipment using the cart, and the chemicals are pumped. - The cart designed specifically for in-factory equipment has narrow caster widths, and small casters are added for rollover prevention. *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

We would like to introduce a case where we manufactured a custom pressure vessel at the request of a pharmaceutical manufacturer. This is a mobile pressure vessel equipped with an opening and closing assist mechanism, and the pressure gauge and safety valve are also made of SUS (stainless steel). The container lid is equipped with hinges for opening and closing, and it can be kept open with a stopper plunger. 【Case Overview】 ■ Mobile pressure vessel with an opening and closing assist mechanism ■ The container lid has hinges for opening and closing ■ The lid can be kept open with a stopper plunger ■ Swing bolts are used to secure the lid, preventing the loss of removed bolts *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. This is a sealed container with a cyclone used for small-scale production in the manufacturing process, where the pumped-in drug is separated into air and drug in the cyclone section. The container and the cyclone lid are sealed with a silicone rubber packing and catch clips. 【Case Overview】 - The pumped-in drug is separated into air and drug in the cyclone section. - The drug accumulates in the lower receiving container, while the air is discharged through the opening of the cyclone lid. - An exhaust duct is attached to the cyclone opening, leading to an external dust collection device. - The container and the cyclone lid are sealed with a silicone rubber packing and catch clips. *For more details, please refer to the PDF materials or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Stainless steel container

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a pharmaceutical manufacturer. The powder placed in the hopper is supplied through suction while being vibrated by a vibrator. An air introduction valve prevents powder clogging in the piping. [Case Overview] - Powder placed in the hopper is vibrated - Supplied through suction while being vibrated by a vibrator - An air introduction valve prevents powder clogging in the piping - Equipped with movable casters - Includes automatic and manual valves for preventing powder clogging *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container

We would like to introduce a case where we manufactured custom storage and discharge containers at the request of a formulation equipment manufacturer. The container features a split lid with a removable handle and a knocker's receiving seat to prevent powder clogging caused by bridging. The hopper angle is 60°, and the container with a rope bottom prevents foreign objects from falling during powder loading. 【Case Overview】 - A knocker's receiving seat was provided to prevent powder clogging due to bridging. - Compact angle legs for space-saving. - Hopper angle is 60°. - The container with a rope bottom prevents foreign objects from falling during powder loading. - A bag containing powder can be torn while resting on the rope, allowing the contents to be poured into the container. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

• Stainless steel container

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for heating and stirring liquids in the chemical industry. The unit heats the liquid using a heater inserted into the jacket section and mixes it with a stirrer installed at the top. A thermometer is attached to allow for temperature monitoring of the liquid inside. Additionally, to ensure smooth discharge of the liquid, a single tapered design is used, with the bottom of the container sloping towards the discharge side. 【Case Overview】 ■ Dimensions: Container inner diameter φ565mm × height H1050mm (excluding stirrer base) ■ Container material: SUS304 ■ Capacity: 150L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for heating and melting cosmetic raw materials (wax) in the cosmetics industry. This unit heats the silicone oil inside the jacket (outer tank) using a heater attached to the container, warming the contents like a water bath. By installing a lifter under the container, the height can be adjusted to an appropriate level according to the process. 【Case Overview】 ■ Dimensions: Inner diameter φ470mm × Height H965mm (from container bottom to stirrer base) ■ Container Material: SUS304 ■ Capacity: 100L (Effective capacity 82L) ■ Heater Power Supply: 3-phase 200V ■ Operating Temperature: 150℃ *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the small-batch production of various solutions in the chemical industry. The customer was experiencing an increase in small-scale contract production projects, but their existing large production line could not accommodate these demands. In response, we manufactured a tank with a smaller capacity than the existing one. We supported two different installation methods for the stirrer, allowing for changes in stirring methods according to the type of solution. Additionally, we applied a fluororesin coating to prevent high-viscosity liquids from sticking. [Case Overview] ■ Customer Challenges - Want to accommodate small-batch production of various types - Unable to meet demands with the existing large production line ■ Solution - Manufactured a tank with a smaller capacity than the existing one - Supported two installation methods for the stirrer to allow changes in stirring methods according to the type of solution *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring temperature control unit was adopted for stirring liquids containing insoluble powders in the pharmaceutical industry. This is a set of a stirring container and a temperature control unit (hot water circulation device). The hot water produced by the temperature control unit is supplied to the jacket of the stirring container via a heat-resistant hose and a pump, circulating to heat the liquid inside the container. Although this separate type incurs higher initial costs compared to consolidating functions into one unit, it allows the temperature control unit to be used with other containers, which can lead to a reduction in equipment costs in the long run. 【Case Overview】 <Stirring Container> ■ Dimensions: Inner diameter of container φ470mm × Height H1480mm (when stirring machine is installed) ■ Container Material: SUS304 ■ Capacity: 100L ■ Temperature: 133℃ (jacket section) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the melting and heating of wax in the chemical industry. After heating the white solid wax to liquefy it, the unit supplies the wax to the machine that applies it. A heater inserted into the jacket section warms the water in the jacket, heating the contents like a double boiler. The stirring element features anchor wings shaped to fit the container. It forcibly moves the contents from the bottom of the container to the walls, allowing for liquefaction while preventing the wax from sticking. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ565mm × Height H2200mm (when the stirrer is installed) ■ Container Material: SUS304 ■ Capacity: 150L (Effective capacity 125L) ■ Heater Output: 7.5kW ■ Power Supply: 3-phase 200V ■ Temperature: Room temperature to 80℃ *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the production of binder liquids in the chemical industry. To shorten the dissolution time, a submersible heater that can directly heat the liquid instead of using a jacket was employed. The lid features notches for the stirrer, an opening and closing section for the insertion of the submersible heater, an opening and closing section for material addition and internal inspection, and processing for a helix. 【Case Overview】 ■ Dimensions: Inner diameter of container φ565mm × Height H1095mm (excluding stirrer base) ■ Material: SUS304 ■ Capacity: 150L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel mixing and temperature control unit was adopted for cooling and mixing pharmaceutical formulation materials. This unit stirs while directly cooling the contents with a cooling coil, and the lid and container can be lifted and moved with a lifter even while the stirrer and cooling coil are attached. Additionally, to prevent contamination, two lifters are used: one for clean room applications and another for outdoor use. 【Case Overview】 ■ Dimensions: Container inner diameter φ470mm × height H1395mm (when stirrer is installed) ■ Material: SUS316L ■ Capacity: 60L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring temperature control unit was adopted for the temporary storage and warming of edible oils in the food industry. An ultrasonic level sensor that can measure levels without contact with the contents is used. The pump is used for transferring liquid to the next process. Hot water is circulated within the jacket of the chiller to maintain the edible oil at a constant temperature. An external temperature sensor is connected to the chiller to manage the temperature of the internal solution, and the stirring machine keeps the contents flowing to achieve a uniform temperature. 【Case Overview】 ■ Dimensions: Container inner diameter φ1000mm × height H1470mm (floor to control panel) ■ Container and cart material: SUS304 ■ Capacity: 400L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for dissolving and degassing powders and liquids in the pharmaceutical industry. This unit combines a magnetic stirrer, a constant temperature water circulation device, and peripheral equipment in a pressure vessel. Powder materials are gradually added from the upper eccentric hopper into a container filled with liquid, where they are stirred. The added materials are heated and temperature-controlled with warm water circulated through the jacket, mixed with the upper and lower stirrers, and the completed solution is pumped to other equipment through a tube strainer from the bottom valve of the tank. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ396 × height H1680mm (when stirrer is installed) ■ Material: SUS316L ■ Capacity: 30L ■ Pressure resistance: -0.1MPa to 0.18MPa *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where the wheel material of a container transport cart was changed from rubber wheels or nylon urethane wheels to white nylon wheels. Regular carts often have wheels that are dark-colored, such as black, which can leave black marks on the floor. However, with white nylon wheels, there are no black marks left on the floor. Additionally, the level of dirt on the wheels is easy to see, allowing for hygienic use. We offer a lineup tailored to the sizes of stainless steel containers made by Nitto Metal Industry, allowing you to choose the material of the casters according to the usage environment. 【Product Specifications】 ■ Cart Material: SUS304 ■ Bolts and Nuts: SUS304 ■ Casters ・Wheel Material: Nylon (White) ・Fitting Material: Stainless Steel or SS (Uni-chrome Plated) *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

• Trolley

We would like to introduce a case where a pharmaceutical manufacturer adopted a "ball valve with scale." Before the introduction, each operator opened and closed the valve based on their own judgment, resulting in varying degrees of opening among operators. To address this, a manual ball valve was introduced to adjust the liquid volume during the granulation process of the drug, along with a scale plate that indicates the opening angle for standardizing operations. After the introduction, tasks could be clearly specified, such as "60 degrees for 10 seconds," leading to the standardization of operations and improvement in quality. [Case Overview] ■ Challenges before introduction - Operators opened and closed the valve based on their own judgment, resulting in different degrees of opening among operators. ■ After introduction - Tasks could be clearly specified, such as "60 degrees for 10 seconds." - Led to the standardization of operations and improvement in quality. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• valve

This is a custom-made example of a lid for a stirring tank used for culture liquid (water + powder) supplied to a pharmaceutical manufacturer. The customer used a standard tapered container and also utilized a standard accessory sealed lid. However, since the lid had no opening, it was necessary to open the lid every time a submersible heater or stirrer was used, which made the work difficult. Therefore, a specification for an easy-to-clean opening and closing lid was adopted. When adding powder, it prevents the powder from scattering, and the stirrer and submersible heater can be used without having to leave the lid open. [Issues] - The customer used a standard tapered container and a standard accessory sealed lid. - Since there is no inlet on the lid, the lid must be removed when adding powdered materials, which causes the powder to scatter as it opens fully. - Because there is no opening in the lid, it is necessary to open the lid every time a submersible heater or stirrer is used, making the work difficult. *Other examples can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This is a custom case of a container capable of stirring 100L of liquid containing insoluble powder delivered to a pharmaceutical manufacturer. When there is a need to heat the inside of the container with warm water and stir, it is often proposed to combine the stirring function and temperature control function into one unit, like the "HU" heater unit. However, in this product, a separate type has been adopted. The temperature control unit is mounted on a cart, making it easy to move to the required process. Although it incurs higher costs compared to an integrated stirring and temperature control container, it can lead to reduced equipment costs in the long term. [Case Overview] - Consists of a jacketed stirring container and a temperature control unit (warm water circulation device). - A manual tank ball valve is used for the outlet. - A Bernoulli flow stirrer is adopted, which is less likely to incorporate air and allows for uniform stirring. - Changing the rotation speed is easy with the standard controller. - Both the stirring container and temperature control unit are equipped with "ECK" insulation covers. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Mixer/agitator

This is a custom-made pressure vessel delivered to a pharmaceutical manufacturer, designed with a focus on acid resistance and made from nickel alloy instead of stainless steel. There was a request for a container that could withstand the use of hydrochloric acid for liquid preparation and pumping, so we manufactured a pressure vessel. It is difficult to prevent corrosion from hydrochloric acid with standard stainless steel like SUS304. Therefore, based on our flange-open pressurized vessel with legs "PCN-O-L-30," we made the contact parts from nickel alloy. 【Case Overview】 - The lid is equipped with a view window (integrated) with a hygienic connection "NMB." - The discharge section uses a tank bottom valve that minimizes liquid accumulation. - The inner surface of the valve is coated with highly corrosion-resistant PFA. - The stirrer has been modified to use nickel alloy for the shaft and stirrer, which are in contact with the liquid, creating an acid-resistant Bernoulli flow stirrer "NTME-A." *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made case of a tapered stainless steel container used for the storage and supply of purified water delivered to a pharmaceutical manufacturer. The ball tap is equipped with a float ball, which lowers when the water in the tank decreases, automatically starting the water supply. When the water is supplied, the float ball rises and stops the water supply at approximately 100 liters. Additionally, the container adopts a tapered design that slopes towards the outlet, allowing the water to flow out smoothly until the very last drop. [Case Overview] - A stainless steel ball tap is installed for automatic water supply. - The mechanism for water supply and stoppage is also used in toilet tanks, etc. - A level sensor is attached to the helix on the lid for monitoring. - A vent pipe is attached to the lid. - A cheese fitting is attached to the outlet, allowing connection to two pipes. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made stainless steel hopper delivered to a pharmaceutical manufacturer, designed to allow internal inspection from the side. It features a vertically elongated hopper with a container-integrated elongated viewing window (a custom product of the square flange viewing window "KNM"). The handle is a round rod handle (sanitary type) that prevents liquids and dirt from accumulating. Typically, the window length is up to 280mm, but to maximize the visible area, the window for this product is 460mm long. 【Case Overview】 ■ Equipped with a container-integrated elongated viewing window ■ The window length is 460mm to maximize the visible area ■ Additional brackets for fixing on the container side ■ The handle is a round rod type that prevents liquids and dirt from accumulating *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container