MONOVATE(旧：日東金属工業) Product Lineup

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for heating and melting cosmetic raw materials (wax) in the cosmetics industry. This unit heats the silicone oil inside the jacket (outer tank) using a heater attached to the container, warming the contents like a water bath. By installing a lifter under the container, the height can be adjusted to an appropriate level according to the process. 【Case Overview】 ■ Dimensions: Inner diameter φ470mm × Height H965mm (from container bottom to stirrer base) ■ Container Material: SUS304 ■ Capacity: 100L (Effective capacity 82L) ■ Heater Power Supply: 3-phase 200V ■ Operating Temperature: 150℃ *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the small-batch production of various solutions in the chemical industry. The customer was experiencing an increase in small-scale contract production projects, but their existing large production line could not accommodate these demands. In response, we manufactured a tank with a smaller capacity than the existing one. We supported two different installation methods for the stirrer, allowing for changes in stirring methods according to the type of solution. Additionally, we applied a fluororesin coating to prevent high-viscosity liquids from sticking. [Case Overview] ■ Customer Challenges - Want to accommodate small-batch production of various types - Unable to meet demands with the existing large production line ■ Solution - Manufactured a tank with a smaller capacity than the existing one - Supported two installation methods for the stirrer to allow changes in stirring methods according to the type of solution *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring temperature control unit was adopted for stirring liquids containing insoluble powders in the pharmaceutical industry. This is a set of a stirring container and a temperature control unit (hot water circulation device). The hot water produced by the temperature control unit is supplied to the jacket of the stirring container via a heat-resistant hose and a pump, circulating to heat the liquid inside the container. Although this separate type incurs higher initial costs compared to consolidating functions into one unit, it allows the temperature control unit to be used with other containers, which can lead to a reduction in equipment costs in the long run. 【Case Overview】 <Stirring Container> ■ Dimensions: Inner diameter of container φ470mm × Height H1480mm (when stirring machine is installed) ■ Container Material: SUS304 ■ Capacity: 100L ■ Temperature: 133℃ (jacket section) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the melting and heating of wax in the chemical industry. After heating the white solid wax to liquefy it, the unit supplies the wax to the machine that applies it. A heater inserted into the jacket section warms the water in the jacket, heating the contents like a double boiler. The stirring element features anchor wings shaped to fit the container. It forcibly moves the contents from the bottom of the container to the walls, allowing for liquefaction while preventing the wax from sticking. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ565mm × Height H2200mm (when the stirrer is installed) ■ Container Material: SUS304 ■ Capacity: 150L (Effective capacity 125L) ■ Heater Output: 7.5kW ■ Power Supply: 3-phase 200V ■ Temperature: Room temperature to 80℃ *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for the production of binder liquids in the chemical industry. To shorten the dissolution time, a submersible heater that can directly heat the liquid instead of using a jacket was employed. The lid features notches for the stirrer, an opening and closing section for the insertion of the submersible heater, an opening and closing section for material addition and internal inspection, and processing for a helix. 【Case Overview】 ■ Dimensions: Inner diameter of container φ565mm × Height H1095mm (excluding stirrer base) ■ Material: SUS304 ■ Capacity: 150L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel mixing and temperature control unit was adopted for cooling and mixing pharmaceutical formulation materials. This unit stirs while directly cooling the contents with a cooling coil, and the lid and container can be lifted and moved with a lifter even while the stirrer and cooling coil are attached. Additionally, to prevent contamination, two lifters are used: one for clean room applications and another for outdoor use. 【Case Overview】 ■ Dimensions: Container inner diameter φ470mm × height H1395mm (when stirrer is installed) ■ Material: SUS316L ■ Capacity: 60L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring temperature control unit was adopted for the temporary storage and warming of edible oils in the food industry. An ultrasonic level sensor that can measure levels without contact with the contents is used. The pump is used for transferring liquid to the next process. Hot water is circulated within the jacket of the chiller to maintain the edible oil at a constant temperature. An external temperature sensor is connected to the chiller to manage the temperature of the internal solution, and the stirring machine keeps the contents flowing to achieve a uniform temperature. 【Case Overview】 ■ Dimensions: Container inner diameter φ1000mm × height H1470mm (floor to control panel) ■ Container and cart material: SUS304 ■ Capacity: 400L *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where a stainless steel stirring and temperature control unit was adopted for dissolving and degassing powders and liquids in the pharmaceutical industry. This unit combines a magnetic stirrer, a constant temperature water circulation device, and peripheral equipment in a pressure vessel. Powder materials are gradually added from the upper eccentric hopper into a container filled with liquid, where they are stirred. The added materials are heated and temperature-controlled with warm water circulated through the jacket, mixed with the upper and lower stirrers, and the completed solution is pumped to other equipment through a tube strainer from the bottom valve of the tank. 【Case Overview】 ■ Dimensions: Inner diameter of the container φ396 × height H1680mm (when stirrer is installed) ■ Material: SUS316L ■ Capacity: 30L ■ Pressure resistance: -0.1MPa to 0.18MPa *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers

We would like to introduce a case where the wheel material of a container transport cart was changed from rubber wheels or nylon urethane wheels to white nylon wheels. Regular carts often have wheels that are dark-colored, such as black, which can leave black marks on the floor. However, with white nylon wheels, there are no black marks left on the floor. Additionally, the level of dirt on the wheels is easy to see, allowing for hygienic use. We offer a lineup tailored to the sizes of stainless steel containers made by Nitto Metal Industry, allowing you to choose the material of the casters according to the usage environment. 【Product Specifications】 ■ Cart Material: SUS304 ■ Bolts and Nuts: SUS304 ■ Casters ・Wheel Material: Nylon (White) ・Fitting Material: Stainless Steel or SS (Uni-chrome Plated) *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

• Trolley

We would like to introduce a case where a pharmaceutical manufacturer adopted a "ball valve with scale." Before the introduction, each operator opened and closed the valve based on their own judgment, resulting in varying degrees of opening among operators. To address this, a manual ball valve was introduced to adjust the liquid volume during the granulation process of the drug, along with a scale plate that indicates the opening angle for standardizing operations. After the introduction, tasks could be clearly specified, such as "60 degrees for 10 seconds," leading to the standardization of operations and improvement in quality. [Case Overview] ■ Challenges before introduction - Operators opened and closed the valve based on their own judgment, resulting in different degrees of opening among operators. ■ After introduction - Tasks could be clearly specified, such as "60 degrees for 10 seconds." - Led to the standardization of operations and improvement in quality. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• valve

This is a custom-made example of a lid for a stirring tank used for culture liquid (water + powder) supplied to a pharmaceutical manufacturer. The customer used a standard tapered container and also utilized a standard accessory sealed lid. However, since the lid had no opening, it was necessary to open the lid every time a submersible heater or stirrer was used, which made the work difficult. Therefore, a specification for an easy-to-clean opening and closing lid was adopted. When adding powder, it prevents the powder from scattering, and the stirrer and submersible heater can be used without having to leave the lid open. [Issues] - The customer used a standard tapered container and a standard accessory sealed lid. - Since there is no inlet on the lid, the lid must be removed when adding powdered materials, which causes the powder to scatter as it opens fully. - Because there is no opening in the lid, it is necessary to open the lid every time a submersible heater or stirrer is used, making the work difficult. *Other examples can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This is a custom case of a container capable of stirring 100L of liquid containing insoluble powder delivered to a pharmaceutical manufacturer. When there is a need to heat the inside of the container with warm water and stir, it is often proposed to combine the stirring function and temperature control function into one unit, like the "HU" heater unit. However, in this product, a separate type has been adopted. The temperature control unit is mounted on a cart, making it easy to move to the required process. Although it incurs higher costs compared to an integrated stirring and temperature control container, it can lead to reduced equipment costs in the long term. [Case Overview] - Consists of a jacketed stirring container and a temperature control unit (warm water circulation device). - A manual tank ball valve is used for the outlet. - A Bernoulli flow stirrer is adopted, which is less likely to incorporate air and allows for uniform stirring. - Changing the rotation speed is easy with the standard controller. - Both the stirring container and temperature control unit are equipped with "ECK" insulation covers. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Mixer/agitator

This is a custom-made pressure vessel delivered to a pharmaceutical manufacturer, designed with a focus on acid resistance and made from nickel alloy instead of stainless steel. There was a request for a container that could withstand the use of hydrochloric acid for liquid preparation and pumping, so we manufactured a pressure vessel. It is difficult to prevent corrosion from hydrochloric acid with standard stainless steel like SUS304. Therefore, based on our flange-open pressurized vessel with legs "PCN-O-L-30," we made the contact parts from nickel alloy. 【Case Overview】 - The lid is equipped with a view window (integrated) with a hygienic connection "NMB." - The discharge section uses a tank bottom valve that minimizes liquid accumulation. - The inner surface of the valve is coated with highly corrosion-resistant PFA. - The stirrer has been modified to use nickel alloy for the shaft and stirrer, which are in contact with the liquid, creating an acid-resistant Bernoulli flow stirrer "NTME-A." *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made case of a tapered stainless steel container used for the storage and supply of purified water delivered to a pharmaceutical manufacturer. The ball tap is equipped with a float ball, which lowers when the water in the tank decreases, automatically starting the water supply. When the water is supplied, the float ball rises and stops the water supply at approximately 100 liters. Additionally, the container adopts a tapered design that slopes towards the outlet, allowing the water to flow out smoothly until the very last drop. [Case Overview] - A stainless steel ball tap is installed for automatic water supply. - The mechanism for water supply and stoppage is also used in toilet tanks, etc. - A level sensor is attached to the helix on the lid for monitoring. - A vent pipe is attached to the lid. - A cheese fitting is attached to the outlet, allowing connection to two pipes. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made stainless steel hopper delivered to a pharmaceutical manufacturer, designed to allow internal inspection from the side. It features a vertically elongated hopper with a container-integrated elongated viewing window (a custom product of the square flange viewing window "KNM"). The handle is a round rod handle (sanitary type) that prevents liquids and dirt from accumulating. Typically, the window length is up to 280mm, but to maximize the visible area, the window for this product is 460mm long. 【Case Overview】 ■ Equipped with a container-integrated elongated viewing window ■ The window length is 460mm to maximize the visible area ■ Additional brackets for fixing on the container side ■ The handle is a round rod type that prevents liquids and dirt from accumulating *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made stainless steel base used for immersing a strip-shaped film in a chemical solution, delivered to a bio-related manufacturer. It is made from SUS316L material, which has excellent chemical resistance. The thin, special strip film is inserted into this base and immersed in a tray containing the chemical solution. Since the film itself has delicate properties, any burrs or sharp edges on the partition plates or base could scratch the film and degrade its quality. Therefore, the surface has been processed to be smooth, eliminating any burrs or edges. 【Case Overview】 ■ The thin, special strip film is inserted into this base and immersed in a tray containing the chemical solution. ■ Numerous slotted plates are attached to prevent the films from coming into contact with each other. ■ The surface has been processed to be smooth, eliminating any burrs or edges. ■ Made from SUS316L material, which has excellent chemical resistance. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom case of containers made of nickel alloy used in the liquid preparation process, delivered to a pharmaceutical manufacturer. The customer requested a stirring tank with acid resistance, and after considering various materials, they decided on nickel alloy. When the stirrer (stirring machine) is not in use, a PTFE cover is placed over the cut-out section to prevent foreign matter contamination. The gasket is made of PTFE, which has excellent chemical resistance. After buff polishing, electro-polishing is applied to remove surface contaminants such as buff dust and oil, improving cleanliness by creating a smooth surface. [Case Overview] - The lid has a cut-out section to allow the stirrer to be used while closed. - The stirrer is mounted on a dedicated frame with a control panel, allowing for smooth movement and elevation. - The gasket is made of PTFE, which has excellent chemical resistance. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container

This is a custom-made case of a stainless steel pressure vessel used in the production of active pharmaceutical ingredients, combined with a filtration device owned by the customer, delivered to a pharmaceutical manufacturer. Due to the high hygiene grade required for the process, an order was placed to switch from existing resin tanks to stainless steel tanks. The contents of the tank are pressurized and filtered, then filled into a separate receiving tank. By raising the lifter to create a height difference with the receiving tank, the time required for filling can be reduced. 【Case Overview】 - Compared to resin tanks, stainless steel tanks reduce the risk of contamination. - The lid is equipped with spring-loaded hinges for easy opening and closing. - The inner surface of the container is electropolished. - A stainless steel top plate that is resistant to rust is installed so that the entire lifter base can be washed thoroughly. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made split lid (mountain split lid) consisting of two pieces, used for containers that house stirrers supplied to a pharmaceutical manufacturer. The split lid, which prevents debris from entering the container during stirring and allows for easy opening and closing, is well-suited for use with stirrers. The current split lid also seals the mountain part on the side, further preventing foreign substances from mixing in. We also accept orders for shapes tailored to existing equipment and facilities, as well as for original sizes, so please feel free to consult with us. 【Case Overview】 ■ The split lid prevents debris from entering the container during stirring and allows for easy opening and closing, making it compatible with stirrers. ■ The current split lid seals the mountain part on the side, making it possible to further prevent foreign substances from mixing in. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

This is a custom-made stainless steel product designed to prevent foreign matter contamination in stirrers supplied to pharmaceutical manufacturers. When using a portable stirrer, notches are created in the lid for the shaft to pass through, but these notches become open areas where foreign matter can potentially enter. Therefore, a foreign matter catcher is installed on the shaft of an open-type stirrer, such as a portable (submersible) stirrer, to prevent the intrusion of foreign matter as much as possible. [Case Overview] <Recommended usage based on the rotation speed of the stirrer> ■ At low speeds: Install to catch foreign matter with a plate ■ At high speeds: Install the plate upside down to deflect foreign matter *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

This is a custom-made stainless steel tray with a coating on both the inner and outer surfaces to prevent corrosion, delivered to a pharmaceutical manufacturer. One reason for applying a fluororesin coating is to improve chemical resistance. Typically, the coating is applied only to the inner surface that comes into contact with the contents, but in this case, it was also applied to the outer surface for corrosion prevention. Since the entire surface is protected with a fluororesin coating, it can prevent corrosion not only during the use of corrosive chemicals but also during instances of liquid splatter and cleaning processes. [Case Overview] - Coating applied to the outer surface of the tray for corrosion prevention - Prevents corrosion during liquid splatter and cleaning processes, in addition to when chemicals are in use *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made example of a drip-proof beaker with a specialized lid supplied to a pharmaceutical manufacturer. The "BK-SMA-DP" has a spout that is not horizontal, so the lid was created to match the shape of the spout. The interior surface has been electropolished. Additionally, laser marking has been applied to the side of the beaker for content identification. [Case Summary] - The lid was made to match the shape of the spout since it is not horizontal. - Laser marking for content identification has been applied to the side of the beaker. - The interior surface has been electropolished. *Other examples can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made case of a square stainless steel container used as a waste liquid receiving vessel delivered to a medical supplies manufacturer. It is used as a tank to receive waste liquid from equipment in the manufacturing process and direct it to the waste outlet. Its square shape makes it easy to integrate into equipment and effectively utilize space. Additionally, it adopts a single taper shape with an inclined bottom plate, allowing for piping to be connected to the outlet to completely discharge the waste liquid, and it is equipped with a fixed base (bracket). [Case Overview] - Used as a tank to direct waste liquid to the outlet - Square shape makes it easy to integrate into equipment and effectively utilize space - Adopts a single taper shape with an inclined bottom plate - Piping connected to the outlet to completely discharge waste liquid - Equipped with a fixed base (bracket) *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container

This is a custom-made stand used to measure airborne bacteria, delivered to a pharmaceutical manufacturer. A Petri dish containing agar medium is placed on the top and left for a certain period. A lid can be placed on the middle section, and since it is made entirely of stainless steel, it is hygienic. Customization options include changing the height, adjusting the diameter of the part where the Petri dish is placed (made to fit the size of the dish), and increasing or decreasing the number of tiers. [Case Overview] - A Petri dish containing agar medium is placed on the top and left for a certain period. - A lid can be placed on the middle section. - The height of the tiers can be changed. - Made entirely of stainless steel, ensuring hygiene. *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel utensils and containers

This is a custom-made case of stainless steel bottles that can manage contents, used for weighing, delivered to a pharmaceutical manufacturer. The bottles are straight 316L with a neck finish and feature laser marking, with identification numbers printed on the side of the container, the cap neck, and the clamp band. Stainless steel products made by Nitto Metal Industry can have text, management numbers, company logos, and more printed using laser marking. [Case Overview] - Laser marking applied to straight 316L neck finish bottles - Identification numbers printed on the side of the container, the cap neck, and the clamp band - Two-dimensional codes are also printed on the side of the container and the cap neck, allowing for instant data management with a barcode reader - Text, management numbers, company logos, and more can be printed using laser marking *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel utensils and containers

This is a custom case of a diaphragm-type tank bottom valve used for liquid discharge, delivered to a pharmaceutical manufacturer. Typically, the discharge outlet is only in one direction, but since the customer requires discharge in two directions, this valve is designed to allow discharge in both directions. It is a diaphragm valve that excels in discharge and agitation, directly mounted on the bottom of the container. By closing one direction with a cap or similar, it can also be used as a one-direction valve. 【Case Overview】 ■ Can discharge in two directions ■ Diaphragm valve that excels in discharge and agitation ■ Directly mounted on the bottom of the container ■ Can be used as a one-direction valve by closing one direction with a cap or similar *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• valve

This is a custom-made stainless steel basket used for disinfecting pipettes, delivered to a pharmaceutical manufacturer. It is made entirely of stainless steel and is manufactured to the size of the pipettes owned by the user. It features a simple locking mechanism that prevents the lid from opening during autoclave loading and unloading, ensuring that the pipettes do not fall. Additionally, it is designed for use in a clean room, eliminating any burrs or protrusions from each part. [Case Overview] - Manufactured to the size of the pipettes owned by the user - Made entirely of stainless steel - Designed for use in a clean room, eliminating burrs and protrusions from each part - Features a simple locking mechanism to prevent pipettes from falling when the lid opens and closes during autoclave loading and unloading *Other cases can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel utensils and containers

This is a custom-made stainless steel cart used for transporting stainless steel tanks delivered to a pharmaceutical manufacturer. The customer originally used a cart with non-white urethane wheels and requested white wheels. Additionally, it was difficult to lift the tank off the cart when transferring it to a pallet. Therefore, we adopted white wheels (made of nylon) so that the tank could be transferred by sliding it without lifting it. [Customer Requests and Issues] ■ Requested white wheels (originally used a cart with non-white urethane wheels) ■ It was difficult to lift the tank off the cart when transferring it to a pallet. *Other examples can be viewed via "PDF Download." *For more details, please refer to the PDF materials or feel free to contact us.

• Trolley

We would like to introduce a case where we custom-made a "10L Liquid Storage Square Tank" and delivered it to a pharmaceutical manufacturer. This product is a square stainless steel container used for liquid storage, designed to utilize storage space efficiently by being square-shaped, with handles that do not extend beyond the width of the container. To facilitate easy liquid discharge, the outlet is designed in a hopper shape. 【Product Overview】 ■ Designed in a square shape to utilize storage space efficiently ■ Handles are designed not to extend beyond the width of the container ■ Outlet is in a hopper shape for easy liquid discharge ■ The discharge outlet is a helical design, allowing for airtight storage ■ Made of SUS316L with excellent corrosion resistance and an electropolished interior *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

• tank

We would like to introduce a custom-made case of the "Stainless Steel Cart with HEPA Unit" delivered to a pharmaceutical manufacturer. This product is battery-operated and has the advantage of being able to move while maintaining positive pressure protection with clean air, making it suitable for transporting products filled in a sterile environment in a sterile manner. Additionally, it is designed to allow height adjustment for storing vials in a multi-stage freeze dryer. 【Features】 ■ Used in the manufacturing process of sterile injectable products ■ Battery-operated ■ Equipped with a digital differential pressure gauge to monitor positive pressure levels ■ Height adjustable for storage in a multi-stage freeze dryer *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

• Trolley

We would like to introduce a case of a custom-made stainless steel container (bottle) used for sampling. The "30ml Heller-style small container" is a sampling container for quality verification during the production process. With a capacity of 30ml, it is suitable for storing small quantities of various samples. Due to the heavy upper part with the cap Heller and Heller clamp, the bottom of the container has been made larger and heavier to improve stability and prevent tipping. 【Features】 ■ With a small capacity of 30ml, it is suitable for storing small quantities of various samples. ■ Heller structure allows for easy disassembly and cleaning. ■ The bottom of the container is larger and heavier to enhance stability and prevent tipping. ■ The Heller gasket is made of PTFE, which has excellent chemical resistance. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Stainless steel container

We would like to introduce a case where we custom-made a 50ml sample bottle and delivered it to a pharmaceutical manufacturer. This product, with a capacity of 50ml, is suitable for storing a small quantity of various samples. The cap is hexagonal for easy manual tightening and torque management, and it is made entirely of stainless steel, making it resistant to breakage, heat, and impact, unlike glass bottles. 【Features】 - With a capacity of 50ml, it is suitable for storing a small quantity of various samples. - The cap is hexagonal for easy manual tightening and torque management. - Made entirely of stainless steel, it is resistant to breakage, heat, and impact like glass bottles. - Suitable for storing and transporting hazardous chemicals and important reagents. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Stainless steel container

We would like to introduce a case of custom-made stainless steel containers (bottles) used for the storage and pumping of delivery reagents. The liquid contact parts of the "100ml Pressure Container Helical Type" are all subjected to high-quality electropolishing, and the gasket is made of silicone rubber compliant with food sanitation laws. Due to the heavy upper part with the cap helical, helical clamp, and fittings, the outer dimensions of the container's bottom are made larger and heavier to prevent tipping. 【Features】 ■ The cap helical comes in two types: for storage and for pumping - Storage: Equipped with a handle for easy carrying - Pumping: Uses a φ8mm PFA tube attached to the push connector ■ All liquid contact parts are subjected to high-quality electropolishing ■ The gasket is made of silicone rubber compliant with food sanitation laws *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Stainless steel container

We would like to introduce a case where we custom-manufactured a 1L long-term storage container for a pharmaceutical manufacturer. The wetted parts are made of SUS316L, which has excellent corrosion resistance, pitting resistance, and intergranular corrosion resistance. The interior surface has been electropolished to enhance corrosion resistance. Numbers and other information are printed using laser marking, allowing for validation management of the container. 【Features】 ■ Used for long-term storage of samples and observation of sample aging changes ■ Wetted parts are made of SUS316L, which has excellent corrosion resistance, pitting resistance, and intergranular corrosion resistance ■ The interior surface has been electropolished to enhance corrosion resistance ■ A T-shaped handle is attached to the lid (cap hurl) ■ Numbers and other information are printed using laser marking * For more details, please refer to the PDF document or feel free to contact us. * Other cases can be viewed from the "PDF Download" section.

• tank

We would like to introduce a case of a custom-made stainless steel container used to create a coating agent for coating the surfaces of tablets and other items. The lid of the "200L Liquid Preparation Tank" can be removed in halves, making it easier to load materials and check the interior. Additionally, the interior has been electropolished to enhance cleanliness. Furthermore, a jacket for heating or cooling the contents has been installed. 【Features】 ■ The lid can be removed in halves, making it easy to load materials and check the interior. ■ The interior has been electropolished to improve cleanliness. ■ A jacket for heating or cooling the contents has been installed. ■ A tank bottom valve that allows for smooth discharge without liquid residue is used at the outlet. ■ Numbers and other markings are applied to the lid and body for validation management. *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• tank

We would like to introduce a case where we custom-made a "Heller-type pressure vessel with mixer and lifter" and delivered it to a pharmaceutical manufacturer. We adopted a magnetic stirrer (mixer) that allows for mixing under pressure (in a sealed environment). The container is equipped with brackets and casters, allowing for movement with the lifter and the casters. 【Features】 ■ Adoption of a magnetic stirrer (mixer) ■ Mixing while cooling the contents with a cooling coil ■ Brackets are attached to the lid ■ A tank bottom valve is used to ensure smooth discharge of contents without residue ■ When checking the condition inside the container, a viewing window and flashlight are used *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• tank

This is a customized product based on the requests "The existing glass filtration device does not have enough capacity" and "I want to use a handheld poly bottle for collecting the filtrate." It can perform suction filtration of about 2 liters at a time. Application: Filtration of ceramic raw materials. Although it is larger than typical glass laboratory filters, it is made of sturdy stainless steel, allowing for safe handling. Reinforcements have been added to the bottom of the container to prevent tipping.

• Filtration Equipment
• Ceramics

We would like to introduce a case where we custom-made a "pure water storage container" and delivered it to a traditional Chinese medicine manufacturing company. This product injects a certain amount of purified pure water using an ultrasonic level gauge, and during storage, it suppresses bacterial growth with a UV sterilization lamp. The next process is controlled by an electromagnetic valve for discharge, and during discharge, air is introduced through an external air intake valve with a filter. 【Features】 - Injects a certain amount of purified pure water using an ultrasonic level gauge - Suppresses bacterial growth during storage with a UV sterilization lamp - The content volume can be checked with a Teflon tube level gauge - A control panel is mounted on the side of the container - Adopts an easy-to-open catch-clip type sealed container *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from "PDF Download."

• tank

We would like to introduce a case where we manufactured a custom-made "sanitary bat" and delivered it to a pharmaceutical manufacturer. All corners are rounded, making it easy to work with and clean. It is made of SUS316L, a stainless steel with excellent corrosion resistance, and the interior has been electropolished. The edges have no rolled or folded seams, eliminating dead spaces where foreign substances or powders can accumulate, making it very hygienic. 【Features】 ■ Made of SUS316L, a stainless steel with excellent corrosion resistance ■ Interior is electropolished ■ All corners are rounded, making it easy to work with and clean ■ No rolled or folded seams at the edges ■ No dead spaces for foreign substances or powders to accumulate, making it very hygienic * For more details, please refer to the PDF document or feel free to contact us. * Other cases can be viewed from the "PDF Download" section.

• Contract manufacturing

We would like to introduce a case of a custom-made wrench socket for clamp bands. This product is used by inserting the wing nut of the clamp band into the groove on the surface after attaching the socket to a torque wrench. By setting the tightening torque with a digital torque wrench, it is possible to prevent variations due to individual differences. This is a product you would want to have as a set when filling hazardous material transport containers. 【Features】 ■ Tighten the Heller clamp band while measuring torque ■ Prevent variations due to individual differences by setting the tightening torque ■ A product you would want to have as a set when filling hazardous material transport containers * For more details, please refer to the PDF document or feel free to contact us. * Other cases can be viewed from the "PDF Download" section.

• Contract manufacturing

We would like to introduce a case where we custom-manufactured a stainless steel cart and delivered it to a pharmaceutical manufacturer's research laboratory. The cart is designed to be inserted into chambers and benches installed in the laboratory, allowing for the movement and exchange of multiple chambers of the same size while keeping the test materials on them. It is manufactured to fit the sizes of the chambers and benches. 【Features】 - Used in combination with raft chambers (critical exhaust devices) and clean benches (sterile benches) - Allows for the movement and exchange of multiple chambers of the same size while keeping the test materials on them - Manufactured to fit the sizes of the chambers and benches *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Trolley

Here is an example of a custom-made "Sterilization Box with a Perforated Plate Structure." The top cover features a ring-shaped knob and is secured to the case with a slide lock mechanism. By removing the front shutter, the contents can be discharged. Once the front shutter is removed and the top cover is taken off, cleaning the interior becomes easy. 【Features】 ■ Full perforated plate structure ■ The top cover is secured to the case with a slide lock mechanism ■ The top cover has a ring-shaped knob ■ The contents can be discharged by removing the front shutter ■ Removing the front shutter and taking off the top cover allows for easy cleaning of the interior *For more details, please refer to the PDF document or feel free to contact us. *Other examples can be viewed from the "PDF Download" section.

• Contract manufacturing

We would like to introduce a case where we custom-made an all-stainless steel cart for use in a clean room and delivered it to a pharmaceutical manufacturer. This product is capable of steam sterilization using an autoclave, and the edges of the cargo deck are raised by bending. To prevent impact during contact, silicone rubber pads are attached to the four corners of the cargo deck. 【Features】 ■ Capable of steam sterilization using an autoclave ■ Wheels can be locked during loading and unloading ■ The foot brake is equipped with a silicone tube for noise reduction ■ The underside of the cargo area is reinforced for load-bearing ■ The height from the floor to the handle is 850mm * For more details, please refer to the PDF document or feel free to contact us. * Other cases can be viewed from the "PDF Download" section.

• Contract manufacturing

We would like to introduce a case where we custom-made an "all stainless steel pump bottle" and delivered it to a pharmaceutical manufacturer. The discharge can be in spray or liquid form, and since it is made of stainless steel, both the container and pump can be steam sterilized. It is fully disassemblable and has excellent cleanability. No leaching of environmental hormones from the material has been confirmed. 【Features】 ■ Designed for use with alcohol ■ Both the container and pump can be steam sterilized due to stainless steel construction ■ Discharge can be in spray or liquid form ■ Excellent cleanability ■ No leaching of environmental hormones from the material has been confirmed *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed via "PDF Download."

• Contract manufacturing

We would like to introduce a case where we custom-made a "drip-proof beaker" for liquid dispensing and delivered it to a food manufacturer. Designed and manufactured in a capacity (10L) that is not available in the standard lineup. It can pour various liquids, from thin to highly viscous, without causing drips. When pouring raw materials or chemicals into large tanks, it allows for work to be done without soiling clothing or the surrounding area. 【Features】 ■ Can pour various liquids without causing drips ■ Allows for work to be done without soiling clothing or the surrounding area ■ The welded parts of the handle are fully welded with no gaps ■ The rim of the container is designed with a sanitary specification without any folds ■ The handle is a pipe handle that makes it easy to apply force when lifting *For more details, please refer to the PDF document or feel free to contact us. *Other cases can be viewed from the "PDF Download" section.

• Stainless steel container