日本スターテクノ Product Lineup

It demonstrates high precision performance in high-pressure applications up to 10,000 psig / 689 bar(g). Equilibar's high-pressure regulators are available in standard low-flow models for applications such as high-pressure reactors and ultra-low-flow models for applications like high-pressure core testing. They achieve high precision and stable control for liquid, gas, and multiphase fluids. Equilibar has announced the U20L, a new ultra-low-flow BPR with a rated pressure of 20,000 psig / 1375 bar(g), integrated into DCI Test Systems' ABPR-20. The BPR shown on the right, H10P, has a rated pressure of 10,000 psig / 689 bar(g). Since Equilibar regulators are dome-loaded, the dome reference port requires a pilot setting reference pressure equal to the desired inlet pressure (at a 1:1 ratio). This pilot setting pressure is typically supplied from a high-pressure inert gas cylinder, such as nitrogen. Customers usually control this reference setting pressure using a manual pressure-reducing regulator, but there are other methods to apply pressure load to the dome of the Equilibar BPR.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

By upgrading to an SS316 diaphragm and Kalrez O-ring, the operating temperature range can be extended to 300°C/527°F. Using a metal diaphragm also allows the pressure range to be increased to a maximum of 10,000 psig/689 bar(g). The standard PTFE/glass composite diaphragm can be used under conditions of low pressure up to 232°C (450°F), but considering the mechanical stress reduction of PTFE at high temperatures, the SS316 diaphragm is more practical for most high-temperature applications. In some applications, diaphragms made of Hastelloy C276 are also available.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The BR series back pressure regulators with block resistance. This series is particularly ideal for specialized applications such as supercritical CO2 (SCO2) extraction, but is also useful in any process where clogging, blockage, or freezing may occur. This series integrates unique design features that allow customers to achieve precise control by reducing the Joule-Thomson effect as supercritical process fluids pass through the unit. The main design feature of this regulator series is a downstream expansion cavity that continuously increases the cross-sectional area to eliminate convergence points caused by ice accumulation. Furthermore, this large thermal capacity increases the heat transfer area for heating the discharge fluid in multiple ways. Finally, this series has specially designed O-ring grooves to reduce stress during rapid depressurization, extending the lifespan of the O-rings. This series offers several custom fitting options, including outlet flanges, tube stubs, or NPT fittings.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

Equilibar offers two form factors within this size range: the IC Industrial Collection and the BD Series, each with its own unique advantages. The optimal choice depends on the application requirements, so please consult with our application engineers regarding that. Both models are designed with Equilibar's dome-loaded porous technology, enabling precise control across a wide flow range. Port sizes are available as standard from 1.5 inches to 4 inches, with custom sizes available upon request.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

When high-precision electronic control is required, the Equilibar back pressure regulator is often used as a pilot regulator. - Designed for static to low flow applications of inert gases such as nitrogen and air - Compatible with all non-corrosive gases - Very high resolution with 0.25% accuracy - Digital or analog communication - Direct operation from a keypad - Controls pressures up to 3,000 psig

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

EVR maintains precise control despite changes in supply vacuum and flow rate. The Equilibar precision vacuum regulator operates differently from traditional vacuum control valves. They use a flexible diaphragm as the only moving part. This diaphragm seals directly against the orifice of the internal valve, eliminating the "stiction" commonly seen in traditional vacuum control valves that rely on dynamic O-rings or wiper-type seals. Equilibar's design is frictionless and can control vacuum with very high resolution. Let's learn more about how it works.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

Designed for pilot scale and manufacturing scale, these models are widely used for electrolysis, fuel cell testing, continuous API manufacturing, pressure bypass control, and high-resolution flow control. Trim and body materials can be customized to meet process requirements. Common stock materials include SS316L and PVC, but depending on the application, GS backpressure regulators can also be made from materials such as aluminum, Hastelloy C276, Monel, PTFE, and PEEK. O-ring and diaphragm materials are also available in various materials to suit process needs.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

We solve critical performance issues for laboratories and gas analysis systems around the world. They are particularly popular in applications such as catalyst research and reservoir core analysis. Equilibar features a design in the Research Series with multiple trim styles and a variety of diaphragm materials, accommodating many demanding research environments. The back pressure regulators in the Research Series handle a very wide range of flow rates, pressures, and temperatures. Materials include Hastelloy, SS316L, PTFE, and FFKM (Kalrez). The maximum temperature range for research back pressure regulators is standard at 150°C, with a maximum of 200°C using Viton seals and metal diaphragms, and up to 325°C with Kalrez seals and metal diaphragms. For extreme temperatures, the High-Temperature (HT) model can be used in processes up to 450°C.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The IMX gas mixing platform, designed for high-flow applications at percentage levels, is ideal for larger commercial-scale operations. It creates precise blends with composite flow rates of 0 to 20 SLPM and 0 to 3200 SLPM. Real-time process control and gas supply options prioritize flow and pressure. The IMX is a gas mixer capable of 24-hour operation in the most demanding commercial and industrial environments, featuring a robust all-steel chassis. Consistent and accurate gas mixing ratios are controlled by MFCs. Individual channels are adjusted to provide precise mixed gas, outlet pressure control, and rapid response to changing process conditions. The accuracy of the target mix ratio is ±0.6%. The flow control response time is typically 25 to 125 ms (T63). It comes with a color TFT display screen and can blend up to four gas streams using pure or pre-mixed feed sources. It supports many corrosive and refrigerant gases. The rear panel connections include an integrated EMO switch, optional external EMO input, and 24V alarm output. It is designed for safe continuous operation 24 hours a day, with a focus on durability.

• Flow Meter
• Flow Control
• Food Packaging Machinery

◆An industrial form factor with the same features and functions as the benchtop remote MXM ◆MFCs ranging from 2 to 10 units (from 0-100 SCCM to 0-12,000 SLPM) ◆19-inch 4U rack space, steel chassis, rear pressure port ◎MAP Packaging (Modified Atmosphere Packaging) In the food and beverage packaging industry, accurate and reliable gas mixing is essential to ensure product quality and safety. Traditional systems are often susceptible to temperature and pressure changes, leading to waste and inefficiency. Allicat's mass flow-based mixing technology enables stable mixing and smooth operation, contributing to manufacturers' quality improvement and cost reduction. ◎Benefits of FusionFlow IMX for packaging lines and compliance - Accurate multi-gas mass flow measurement allows for constant precise tracking of mixed gas quantities. - High-speed control response offsets pressure fluctuations. - On-site mixing saves costs typically spent on pre-mixed bottled solutions. - The all-in-one configuration allows for easy gas mixing without a computer.

• Flow Meter
• Flow Control
• Filling and packaging machine

◆Remote Control Interface Box ◆Available for 2 to 10 MFCs (from 0-100 SCCM to 0-12,000 SLPM units) ◆Increased range for fixed flow applications and dynamic pressure control ◆Compact tabletop controller ◎MAP Packaging (Modified Atmosphere Packaging) In the food and beverage packaging industry, accurate and reliable gas mixing is essential to ensure product quality and safety. Traditional systems are often vulnerable to changes in temperature and pressure, leading to waste and inefficiency. Allicat's mass flow-based mixing technology achieves stable mixing and smooth operation, contributing to manufacturers' quality improvement and cost reduction. ◎Benefits of FusionFlow IMX for Packaging Lines and Compliance - Accurate multi-gas mass flow measurement allows for constant precise tracking of mixed gas quantities. - High-speed control response offsets pressure fluctuations. - On-site mixing saves costs typically spent on pre-mixed bottled solutions. - All-in-one configuration enables easy gas mixing without a computer.

• Flow Meter
• Flow Control
• Other packaging machines

◆A compact form factor version of the turnkey MXM for low flow applications ◆Range from 2 to 6 integrated MFC units (0–10 SCCM to 0–10 SLPM, for non-corrosive gases only) ◆Full rear panel connections compatible with all gases and connections ◆Aluminum flow path ◎MAP Packaging (Modified Atmosphere Packaging) In the food and beverage packaging industry, accurate and reliable gas mixing is essential to ensure product quality and safety. Traditional systems are often vulnerable to changes in temperature and pressure, leading to waste and inefficiency. Allicat's mass flow-based mixing technology achieves stable mixing and smooth operation, contributing to manufacturers' quality improvement and cost reduction. ◎Benefits of FusionFlow IMX for packaging lines and compliance - Accurate multi-gas mass flow measurement allows for constant precise tracking of mixed gas quantities. - High-speed control response offsets pressure fluctuations. - On-site mixing saves costs typically spent on pre-mixed solutions in bottles. - The all-in-one configuration enables easy gas mixing without a computer.

• Flow Meter
• Flow Control
• Food Packaging Machinery

◆Gas blend for tabletop in a single box ◆Integrated MFC from 2 to 6 (any unit from 0-100 SCCM to 0-100 SLPM) ◆Stainless steel flow path ◎MAP Packaging (Modified Atmosphere Packaging) In the food and beverage packaging industry, accurate and reliable gas mixing is essential to ensure product quality and safety. Traditional systems are often vulnerable to changes in temperature and pressure, leading to waste and inefficiency. Allicat's mass flow-based mixing technology achieves stable mixing and smooth operation, contributing to quality improvement and cost reduction for manufacturers. ◎Benefits of FusionFlow IMX for packaging lines and compliance - Accurate multi-gas mass flow measurement allows for constant precise tracking of mixed gas quantities. - High-speed control response offsets pressure fluctuations. - On-site mixing saves costs typically spent on bottled mixed solutions. - All-in-one configuration enables easy gas mixing without a computer.

• Flow Meter
• Flow Control
• Other food packaging

Supports 98 types of gases, including mixed gases. High accuracy of ±0.6% RD (16.7–100% FS) with a fast response time of 10 ms.

• Flow Meter
• Flow Control
• Coriolis flow meter

The "MC/MCP/MCR series" is a mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup that supports 128 types of gases, including corrosive gases and refrigerant gases, such as the "MCS/MCRS series," "MCW/MCRW series," and "MCV/MCVS series." 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 12000 SLPM ■ Standard analog output and RS 232C communication ■ Supports mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Flow Control
• Coriolis flow meter

The "M Series" is a mass flow meter manufactured by ALICAT that can measure 98 types of gas flow rates, including mixed gases, with a single unit. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10 ms to quickly follow flow changes. In addition, the lineup includes the "MS Series," which supports 130 types of gases including corrosive gases and refrigerants, and the "MW Series," which can measure with extremely low differential pressure. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The "MQ Series" is a high-pressure mass flow meter manufactured by ALICAT that can measure the flow of 98 types of gases, including mixed gases, with a single unit. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and quickly responds to flow changes with a fast response time of 10 ms. 【Features】 ■ Maximum operating pressure is 320 PSIA (2.2 MPaA). ■ Pressure resistance is 400 PSIA (2.7 MPaA). ■ Fast response time of 10 ms ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Available flow range from 0.5 SCCM to 5000 SLPM ■ Standard equipped with analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The "MS Series" is a mass flow meter manufactured by ALICAT that can measure the flow of 130 types of gases, including corrosive gases and refrigerant gases, with a single unit. It provides accurate flow measurements of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10ms, allowing it to quickly follow changes in flow. Additionally, it includes models like the "MW Series," which can measure with extremely low differential pressure. 【Features】 ■ 10ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 3000 SLPM ■ Standard analog output and RS-232C communication ■ Standard backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The "MW Series" is a mass flow meter manufactured by ALICAT, which can measure with very small differential pressure, resulting in minimal pressure loss, making it ideal for environments where low pressure is used. It provides accurate flow measurement of ±(0.8% Reading + 0.2% F.S.) and has a fast response time of 10 ms, quickly adapting to changes in flow. In addition, we offer the "MS Series," which supports 130 types of gases, including corrosive gases and refrigerants. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 1000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The "MB Series" is a portable mass flow meter manufactured by ALICAT that can measure 98 types of gas flow, including mixed gases. It offers accurate flow measurement with an accuracy of ±(0.8% Reading + 0.2% F.S.) and a fast response time of 10 ms to quickly follow flow changes. In addition, we offer the "MBS Series," which supports 130 types of gases including corrosive gases and refrigerants, and the "MWB Series," which can measure with extremely low differential pressure. 【Features】 ■ 10 ms fast response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS-232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Flow Meter
• Other flow meters

The "MC/MCP/MCR series" is a standard type mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup such as the "MCHQS/MCRQS series," which can accommodate 128 types of gases, including corrosive gases and refrigerant gases. 【Features】 ■ 100ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 12000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter
• Other flow meters
• Flow Control

The "MC/MCP/MCR series" is a high-pressure mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup such as the "MCHQS/MCRQS series," which supports 128 types of gases, including corrosive gases and refrigerant gases. 【Features】 ■ 100ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other flow meters
• Flow Control

The "MCS/MCRS series" is a mass flow controller manufactured by ALICAT that can measure 128 types of gas flow, including corrosive gases and refrigerant gases, with a single unit. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. Additionally, it includes the "MW series," which can measure with extremely small differential pressures. 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 3000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other flow meters
• Flow Control

The "MCW/MCRW series" is a mass flow controller manufactured by ALICAT, ideal for environments where low pressure is used, as it can measure with very small differential pressure, resulting in minimal pressure loss. It achieves fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer the "MCS/MCRS series," which supports 128 types of gases, including corrosive gases and refrigerants. 【Features】 ■ 100 ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Range from 0.5 SCCM to 1000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other flow meters
• Flow Control

The "MCE/MCES series" is a mass flow controller manufactured by ALICAT, featuring a built-in valve that complies with SEMI standards. It achieves a fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. 【Features】 ■ 100ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 10 SCCM to 20 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other semiconductor manufacturing equipment
• Flow Control

The "MCV/MCVS series" is a mass flow controller manufactured by ALICAT, equipped with a shut-off valve for vacuum applications. It achieves a fast response through a laminar flow method (differential pressure type). It is equipped with a highly accurate differential pressure sensor to measure flow rates precisely. 【Features】 ■ 100ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Available from 10 SCCM to 20 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Vacuum Equipment
• Flow Control

The "MCD/MCDS series" is a mass flow controller manufactured by ALICAT that can handle 98 different types of diverse gases with a single unit. It achieves fast response through a laminar flow method (differential pressure type). Equipped with a highly accurate differential pressure sensor, it measures flow rates precisely. In addition, we offer a lineup that supports 128 types of gases, including corrosive gases and refrigerant gases, such as the "MCDS series" and "MCDW series." 【Features】 ■ 100ms control response ■ High flow accuracy of ±(0.8% RD + 0.2% FS) ■ Lineup from 0.5 SCCM to 5000 SLPM ■ Standard analog output and RS 232C communication ■ Compatible with mixed gases ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Flow Control
• Flow Meter
• Other flow meters

The 【BIO Series】 is a mass flow controller manufactured by ALICAT that features a laminar flow method (differential pressure type) with a fast response time of 10 ms. - Long-term stability: Extremely low zero drift - Assurance against process water contamination - High contrast, clear display - ASME (American Society of Mechanical Engineers) recommended: 316L stainless steel and USP Class VI, FDA (Food and Drug Administration) grade elastomers - Gas selection switching possible without recalibration and without loss of accuracy - Industrial Ethernet - Wide range flow: 1 SCCM to 5000 SLPM - Response speed of 10 ms enables high-speed data recording - Flexible process connection (SAE standard)

• Flow Meter
• Other flow meters
• Biogas

The "Coriolis CODA Series" is a Coriolis mass flow meter/controller manufactured by ALICAT that can accurately measure high-pressure, low-flow, and various types of fluids. It can accurately measure fluids from low flow rates in the food industry to high-pressure applications. It also accommodates variable fluid mixtures and corrosive liquids. 【Dosing】 In catalyst research and food production, the precise dosing of additives is crucial. The CODA series is ideal for measuring and controlling components with its ultra-low flow functionality. 【High-Pressure Operation】 In fuel cell and rocket research, it is necessary to meet high precision requirements. It can accurately measure fluids at 4,000 PSI both on the ground and in the air. 【Variable Systems】 Accurate measurement is important even in processes where the composition of the fluid is unknown. It enables flexible measurement in changing environments, such as in bioreactors, variable fluid mixtures, and measuring outflows in chemical reactions. 【Corrosive Liquids】 From chemical coatings to semiconductors, corrosive liquids pose challenges in material compatibility for many fluid control systems in manufacturing. It is designed to handle corrosive fluid environments. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Coriolis flow meter
• Flow Control

The "Coriolis CODA Series" is a Coriolis mass flow meter/controller manufactured by ALICAT that can accurately measure high-pressure, low-flow, and various types of fluids. It can accurately measure fluids from low flow rates in the food industry to high-pressure applications. It also accommodates variable fluid mixtures and corrosive liquids. 【Dosing】 In catalyst research and food production, the precise dosing of additives is crucial. The CODA series is ideal for measuring and controlling components with its ultra-low flow capability. 【High-Pressure Operation】 In fuel cell and rocket research, it is necessary to meet high precision requirements. It can accurately measure fluids at 4,000 PSI both on the ground and in the air. 【Variable Systems】 Accurate measurement is important even in processes where the composition of the fluid is unknown. It allows for flexible measurement in changing environments, such as in bioreactors, variable fluid mixtures, and measuring outflows in chemical reactions. 【Corrosive Liquids】 From chemical coatings to semiconductors, corrosive liquids pose challenges in material compatibility for many fluid control systems in manufacturing. It is designed to handle corrosive fluid environments. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Coriolis flow meter
• Flow Control

The "Coriolis CODA Series" is a Coriolis mass flow meter/controller manufactured by ALICAT that can accurately measure high-pressure, low-flow, and various fluid characteristics. It can accurately measure fluids from low flow in the food industry to high pressure. It also accommodates variable fluid mixtures and corrosive liquids. 【Dosing】 In catalyst research and food production, the precise dosing of additives is crucial. The CODA series is ideal for measuring and controlling components with its ultra-low flow capability. 【High-Pressure Operation】 In fuel cell and rocket research, there is a need to meet high precision requirements. It can accurately measure fluids at 4,000 PSI both on the ground and in the air. 【Variable Systems】 Accurate measurement is important even in processes where the composition of the fluid is unknown. It enables flexible measurement in changing environments, such as in bioreactors, variable fluid mixtures, and measuring outflows in chemical reactions. 【Corrosive Liquids】 From chemical coatings to semiconductors, corrosive liquids pose challenges in material compatibility for many fluid control systems in manufacturing. It is designed to handle corrosive fluid environments. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Coriolis flow meter
• Flow Control

The "Coriolis CODA Series" is a Coriolis mass flow meter/controller manufactured by ALICAT that can accurately measure high-pressure, low-flow, and various types of fluids. It can accurately measure fluids from low flow rates in the food industry to high-pressure applications. It is also compatible with variable fluid mixtures and corrosive liquids. 【Dosing】 In catalyst research and food production, the precise dosing of additives is crucial. The CODA series is ideal for measuring and controlling components with its ultra-low flow functionality. 【High-Pressure Operation】 In fuel cell and rocket research, it is necessary to meet high precision requirements. It can accurately measure fluids at 4,000 PSI both on the ground and in the air. 【Variable Systems】 Accurate measurement is important even in processes where the composition of the fluid is unknown. It allows for flexible measurement in changing environments, such as in bioreactors, variable fluid mixtures, and measuring outflows in chemical reactions. 【Corrosive Liquids】 From chemical coatings to semiconductors, corrosive liquids pose challenges for material compatibility in many fluid control systems in manufacturing. It is designed to handle corrosive fluid environments. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Coriolis flow meter
• Flow Control

The "Coriolis CODA Series" is a Coriolis mass flow meter/controller manufactured by ALICAT that can accurately measure high-pressure, low-flow, and various types of fluids. 【Dosage】 Accurate dosing of additives is crucial in catalyst research and food production. The CODA series is ideal for measuring and controlling components with its ultra-low flow capability. 【High-Pressure Operation】 In fuel cell and rocket research, it is necessary to meet high precision requirements. It can accurately measure fluids at 4,000 PSI both on the ground and in the air. 【Variable System】 Accurate measurement is important even in processes where the composition of the fluid is unknown. It enables flexible measurement in changing environments, such as in bioreactors, variable fluid mixtures, and measuring outflows in chemical reactions. 【Corrosive Liquids】 From chemical coatings to semiconductors, corrosive liquids pose challenges for material compatibility in many fluid control systems in manufacturing. It is designed to handle corrosive fluid environments. *For more details, please refer to the PDF materials or feel free to contact us.

• Flow Meter
• Coriolis flow meter
• Flow Control

The "P Series" is a pressure gauge manufactured by ALICAT that offers fast response and stability. The "PC/PC3/PCD/PCR Series" is a controller from ALICAT that enables stable pressure control with fast response. The laminar flow method (differential pressure type) achieves fast response. It is equipped with a highly accurate differential pressure sensor that measures flow accurately. 【Features】 ■ Control response of 100 ms ■ High pressure accuracy of ±(0.30% FS) ■ Standard equipped with analog output and RS 232C communication ■ Standard equipped with a backlit LCD display *For more details, please refer to the PDF document or feel free to contact us.

• Pressure
• Pressure Control
• Other Pressure Gauges

The "L Series" is a liquid flow meter manufactured by ALICAT that features a laminar flow method (differential pressure type) with a high-speed response of 20 ms. It quickly follows changes in flow rate, allowing for real-time flow rate monitoring. The flow range is 50:1 from 2 to 100% F.S., with the 0.5 CCM type capable of measuring from 0.01 mL/min. It comes standard with external outputs of 0 to 5 VDC and RS-232C communication, and includes a NIST traceable inspection certificate. Additionally, we offer liquid flow controllers in the "LC/LCR Series" and a portable type with an optional battery. 【Compatible Liquids】 Pure water, methanol, isopropanol, ethanol, ammonia, dimethyl ether, isopentane, thiophene, iso-octane, heptane, acetone *Other compatible liquids may also be available. 【Features】 ■ 20 ms high-speed response / 100 ms control response ■ ±2% F.S. flow accuracy ■ From 0.5 CCM to 10 LPM ■ Display with backlit LCD ■ Standard analog output and RS-232C communication

• Flow Meter
• Other flow meters
• Other measurement, recording and measuring instruments

The "LC/LCR Series" is a liquid flow controller manufactured by ALICAT that can quickly control to a specified flow rate with a response speed of 100 ms using a laminar flow method (differential pressure). It allows for the desired flow rate to be achieved in a short time. Flow rate settings can be easily operated via a front switch, and settings can also be made through analog input or communication. It comes standard with an LCD display, allowing for real-time flow rate monitoring due to its fast response speed. Standard external outputs include 0-5 VDC output and RS-232C communication. A NIST traceable inspection certificate is included as standard. 【Compatible Liquids】 Pure water, methanol, isopropanol, ethanol, ammonia, dimethyl ether, isopentane, thiophene, isooctane, heptane, acetone *Other liquids may also be compatible. 【Features】 ■ 20 ms fast response / 100 ms control response ■ ±2% F.S. flow accuracy ■ From 0.5 CCM to 10 LPM ■ Display with backlit LCD ■ Standard analog output and RS-232C communication *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Other flow meters
• Flow Control

Mass flow measurement is performed using MEMS sensors combined with ALICAT's standard control valves and PID algorithms. ■ 100ms control response - Achieves target flow quickly through PD control. It rapidly follows flow changes and provides stable flow control. - Warm-up time is 70ms, allowing for immediate operation. ■ Standard analog output/input and RS-485 communication - Control flow can be set using a 0-5VDC input. - Current flow is output as 0-5VDC, allowing for recording with loggers and other devices. - RS-485 is standard, enabling centralized monitoring with PLCs and other systems.

• Other measurement, recording and measuring instruments
• Thermal Flow Meter
• Flow Control

We would like to introduce the "Back Pressure Regulator" that we handle. It features a dome-shaped multi-orifice design and employs a flexible diaphragm. It boasts instantaneous response and can simultaneously handle two-phase flow of liquids and gases. It exhibits unparalleled precision and has a very wide flow range capability. Additionally, it is compatible with harsh temperatures and chemical substances. Please feel free to contact us when you need assistance. 【Features】 ■ Dome-shaped multi-orifice design ■ Unparalleled precision ■ Very wide flow range capability ■ Instantaneous response ■ Compatibility with harsh temperatures and chemicals ■ Simultaneous handling of two-phase flow of liquids and gases *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Back Pressure Regulator" from Equilibar, which we handle. This product features a dome-shaped multi-orifice design with a flexible diaphragm, ensuring compatibility with harsh temperatures and chemical substances. Additionally, it can simultaneously handle two-phase flow of liquids and gases. It maintains an extremely wide flow range capability and unparalleled accuracy. Please feel free to contact us when you need assistance. 【Features】 ■ Dome-shaped multi-orifice design ■ Unparalleled accuracy ■ Extremely wide flow range capability ■ Instantaneous response ■ Compatibility with harsh temperatures and chemicals ■ Simultaneous handling of liquid and gas two-phase flow *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Dome-Type Multi-Orifice Valve" is a product that achieves excellent precision and stable operation without friction. Since 2007, Equilibrar has been providing innovative fluid control technology for challenging applications. This product is known as the standard for precision. It enables excellent precision and frictionless control for flow rates, multiphase fluids, corrosive media, sanitary conditions, and extreme temperatures. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent precision ■ Realizes frictionless control ■ High-quality regulator *For more details, please download the PDF or feel free to contact us.

• valve

The "Dome-Type Multi-Orifice Valve" that we handle is a product of Equilibar, which provides innovative fluid control technology. This product features a multi-orifice design that employs a diaphragm, achieving excellent precision and stable operation without friction. It allows for precise and frictionless control over flow rates, multiphase fluids, corrosive media, sanitary conditions, and extreme temperatures. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent precision ■ Realizes frictionless control ■ High-quality regulator *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce the "Vacuum Regulator" from Equilibar, handled by Nippon Star Tech Co., Ltd. This product is a high-quality regulator that achieves excellent precision and frictionless control. Additionally, it offers outstanding precision and frictionless control for flow rates, multiphase fluids, corrosive media, sanitary conditions, and extreme temperatures. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent precision ■ Achieves frictionless control ■ High-quality regulator *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Vacuum Regulator" from Equilibar, handled by Nippon Star Tech Co., Ltd. It offers excellent precision and frictionless control against flow rate, multiphase fluids, corrosive media, sanitary conditions, and extreme temperatures. This is a high-quality regulator that achieves outstanding precision and frictionless control. Please feel free to contact us if you have any inquiries. 【Features】 ■ Excellent precision ■ Achieves frictionless control ■ High-quality regulator *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce our velocity/time measuring instrument, the 'ES2100TN'. It supports either 1 sensor or 2 sensors. It can measure speed and time in one direction or in both directions, with a minimum time measurement of 0.01 ms, allowing for high-speed measurements. 【Features】 ■ Capable of measuring speed and time in one direction or in both directions ■ Supports 1 sensor or 2 sensors ■ Capable of measuring as fast as 0.01 ms *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments