FIRSTEC CORPORATION Product Lineup

"Do not stop the machine. Dramatically improve equipment operating rate with external 3-axis presetting and zero point." The Gintech "EWC Series" is a high-precision wire cut electrical discharge machining vice that completes most setup tasks externally in conjunction with a zero point system. Traditionally, the three-axis presetting of "parallel alignment, centering, and clamping" was performed on the machine; now it can be done externally in advance, allowing for one-touch attachment to the machine at the zero point. This minimizes machine downtime and enables continuous operation of the electrical discharge machine. **Main Features** - External 3-axis presetting support: Adjustments for workpiece tilt and reference positions can be pre-set externally, significantly reducing the cumbersome dial gauge measurements and fine-tuning work on the machine. - High reproducibility with zero point: The vice preset externally can be attached and detached with one touch, ensuring repeatable positioning accuracy and allowing immediate processing after replacement. - Maximization of machine operating rate: While one machine is performing electrical discharge machining, the next workpiece can be preset externally. This is ideal for small-batch production of various types and long hours of unmanned operation. - High corrosion resistance and high rigidity stainless steel structure: Selected special heat-treated stainless materials are used to maintain high precision and rust resistance.

• Processing Jig

Amid rising various costs, there is a strong demand for reducing production costs through the improvement of machine tool "operating rates." The MagVice instantly clamps workpieces using magnetic force, dramatically shortening the labor-intensive setup time. By enabling simultaneous processing of multiple parts and five-sided machining in one go, it significantly enhances processing efficiency and achieves shorter delivery times. Concerns such as "Will chips stick?" are completely unnecessary if used correctly. At the upcoming JIMTOF2026 (West Hall W2073), we will have a live demonstration and a "Special Consultation Corner." Our sales team will kindly and thoroughly explain everything from the properties of magnets to efficient usage methods in response to questions like "Can we use this in our company?" Please bring your company's drawings and actual workpieces. We will provide concrete solutions that directly address your challenges, such as optimal clamping methods and simulations for reducing setup time. Free machining tests using demonstration machines at our booth are also available. To make effective use of your limited time and ensure you take home reliable solutions, we kindly ask you to make a reservation in advance via the link.

• Chuck

The "Fast Grip Self-Centering Vice" is a practical product that can be used for a wide range of applications, including 3-axis vertical, 4-axis horizontal, and 5-axis machining centers. Simple and smart. It is fundamentally composed of eight parts, with the design of each individual component simplified, and the basic shape determined by its function. The jaws can be easily exchanged with minimal lift-off. Additionally, the swing-type jaws have improved gripping power. Center fine adjustment is possible after spindle replacement. 【Features】 ■ The jaws can be easily flipped 180 degrees for quick expansion of the clamping range. ■ The jaws adopt a 1.5° swing on one side, significantly enhancing gripping power. ■ A special angle locking mechanism prevents workpieces from lifting. ■ Unique fine adjustment center mechanism allows for easy center adjustment. ■ Repeatability: 0.005mm *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We offer the "Fasgrip Self-Centering Vice" with a jaw width of 75mm, which features a special angle locking mechanism that prevents workpieces from lifting. The swing-type jaws enhance gripping power, and fine adjustments to the center can be made after spindle replacement. It is fundamentally composed of eight parts, with the design of each individual component simplified, and the basic shape determined by functionality. This generates benefits in terms of maintainability, operability, and flexibility. 【Features】 ■ The jaws can be easily flipped 180 degrees for quick expansion of the clamping range. ■ Adopting jaws that swing 1.5° on one side significantly improves gripping power. ■ The special angle locking mechanism prevents workpieces from lifting. ■ The unique fine adjustment center mechanism makes center adjustments easy. ■ Repetitive accuracy: 0.005mm *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

Introducing the "Fast Grip Self-Centering Vice," which features a jaw that swings 1.5° to one side, significantly enhancing grip strength. Simple yet smart. It is fundamentally composed of eight parts, with the design of each component simplified, and the basic shape determined by functionality. It is practical and can be used for a wide range of applications, including 3-axis vertical, 4-axis horizontal, and 5-axis machining centers. 【Features】 ■ The jaws can be easily flipped and replaced 180 degrees, allowing for quick expansion of the clamping range. ■ The adoption of a jaw that swings 1.5° to one side greatly improves grip strength. ■ A special angle locking mechanism prevents workpieces from lifting. ■ Unique fine adjustment center mechanism allows for easy center adjustment. ■ Repeatability: 0.005mm *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).

• byte

Since it is a type that tightens with a handle, it allows for easy attachment and detachment of the workpiece.

• byte

● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).

• byte

● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).

• byte

● Use gauge blocks to set accurate angles. ● Please obtain the necessary gauge blocks from the trigonometric table (gauge blocks are not included, so please prepare them separately).

• byte

● The angle can be easily read using the main scale and the vernier scale. ● It can rotate 360° horizontally and tilt 45° vertically. ● Minimum vernier scale division: 5 minutes. ● The vice section uses a wedge lock type vice. It is a precision vice designed with a robust design that can firmly grip the workpiece.

• byte

● The scale allows for easy setting to the desired angle. ● Can rotate 360° horizontally and tilt 45° vertically. ● Minimum vernier scale: 5 minutes.

• byte

● Chuck part: ER collet ● ER collet is not included ● It has a scale, allowing for easy setting of the possible angle ● Can rotate 360° horizontally and tilt 45° vertically ● Vernier minimum scale: 5 minutes ● Swivel body auxiliary scale: 5 minutes

• byte

●Chuck part: 3-jaw scroll chuck, 3 inches ●Easy to set to the desired angle due to the scale ●Can tilt 360° horizontally and 45° vertically ●Minimum scale of the vernier: 5 minutes ●Minimum scale of the vernier: 5 minutes

• byte

●Chuck part: 4-inch 3-jaw scroll chuck ●Easy to set to the desired angle due to the scale ●Can tilt 360° horizontally and 45° vertically ●Vernier minimum scale: 5 minutes ●Vernier minimum scale: 5 minutes

• byte

Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P).

• byte

● The angle can be easily read using the main scale and the vernier scale. ● Minimum division of the vernier: 5 minutes. ● Can rotate 360° horizontally. ● Can tilt 45° vertically.

• byte

Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P).

• byte

Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P).

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

Compatible with EROWA's centering plate 100M8 (ER-011599) and System-3R's macro base holder (3R-651/7E-P).

• byte

Compatible with EROWA's centering plate 100M8 (ER-011599) and System-3R's macro base holder (3R-651.7E-P).

• byte

Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651/7E-P).

• byte

Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P).

• byte

●Compatible with EROWA's centering plate 50 (ER-009214) and System-3R's macro base holder (3R-651.7E-P) ●The plate and chucking plug shown in the photo are not included.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

● The lower limit stopper is removable. ● Heat treatment: vacuum hardening and sub-zero treatment.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

It uses heat-treated stainless steel, which is resistant to rust and has magnetic properties.

• byte

● The lower limit stopper is removable. ● Heat treatment: vacuum hardening and sub-zero treatment.

• byte

●Heat treatment: Vacuum hardening and sub-zero treatment

• byte

●Heat treatment: vacuum hardening and sub-zero treatment

• byte

●Heat treatment: Vacuum hardening and sub-zero treatment

• byte

Heat treatment: vacuum hardening

• byte

Heat treatment: vacuum quenching

• byte

Heat treatment: vacuum hardening

• byte

●Heat treatment: Vacuum hardening and sub-zero treatment

• byte