FIRSTEC CORPORATION Product Lineup

This is a very powerful magnetic chuck with a strong magnetic force of over 3500 gauss, making it ideal for holding materials that are difficult to adhere to magnets, such as superhard materials. It features an ON/OFF switch for the magnet.

• Processing Jig

This is a very powerful magnetic chuck with a strong magnetic force of over 3500 gauss, making it ideal for holding materials that are difficult to adhere to magnets, such as carbide. It features an ON/OFF switch for the magnet.

• Processing Jig

Since its launch in 1995, it has continued to be loved by customers worldwide. Industry-leading safety factor of 3.5 times, with a 16.6% increase in magnetic force compared to competitors. Thanks to patented technology, it has been further miniaturized compared to conventional products, with a weight reduction of up to 54.7% compared to competitors and a decrease in the adsorption surface area of up to 42.8% compared to competitors. 【Features】 ■ Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting extremely strong magnetic force. (The ELM-600 has a lifting capacity of 600 kg and a weight of 22.0 kg, whereas comparable Japanese products weigh 33.0 kg.) ■ The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■ Compared to other products, the strong magnetic force with a safety factor of 3.5 times has further improved safety. ■ Its compact and lightweight design makes it easy to use and enhances work efficiency. ■ Repair and regular inspections (for a fee) are available. ■ Manufacturer's three-year warranty. ■ Covered by product liability insurance. *For more details, please request materials or view the PDF data available for download.

• Processing Jig

Since its launch in 1995, it has been continuously loved by customers worldwide. Industry-leading safety factor of 3.5 times, with a 16.6% increase in magnetic force compared to competitors. Thanks to patented technology, it has been further miniaturized compared to conventional products, with a weight reduction of up to 54.7% compared to competitors and a reduction in the suction surface area of up to 42.8% compared to competitors. 【Features】 ■ Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting a very powerful magnetic force. (The ELM-600 has a lifting capacity of 600 kg and a weight of 22.0 kg, while comparable Japanese products weigh 33.0 kg.) ■ The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■ Compared to other products, the powerful magnetic force with a safety factor of 3.5 times has further improved safety. ■ Its compact and lightweight design makes it easy to use and increases work efficiency. ■ Repair and regular inspections (for a fee) are available. ■ Manufacturer's three-year warranty. ■ Covered by product liability insurance. *For more details, please request materials or view the PDF data from the download section.

• Processing Jig

☆Since its launch in 1995, it has been continuously loved by customers worldwide. ☆Industry-leading safety factor of 3.5 times Magnetic force increased by 16.6% compared to competitors ☆Thanks to patented technology, it has been further miniaturized compared to conventional products Weight reduced by up to 54.7% compared to competitors Adsorption surface area decreased by up to 42.8% compared to competitors 【Features】 ■Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting extremely strong magnetic force. (The ELM-600 has a lifting capacity of 600 kg and a weight of 22.0 kg. In contrast, equivalent Japanese products weigh 33.0 kg.) ■The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■Compared to other products, the strong magnetic force with a safety factor of 3.5 times has further improved safety. ■Being compact and lightweight makes it easy to use and enhances work efficiency. ■Repair and regular inspections (for a fee) are available. ■Manufacturer's 3-year warranty ■Covered by product liability insurance *For more details, please request materials or view the PDF data from the download.

• Processing Jig

Since its launch in 1995, it has continued to be loved by customers worldwide. Industry-leading safety factor of 3.5 times, with a 16.6% increase in magnetic force compared to competitors. Thanks to patented technology, it has been further miniaturized compared to conventional products, with a weight reduction of up to 54.7% compared to competitors, and a maximum decrease of 42.8% in the adsorption surface area compared to competitors. 【Features】 ■ Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting extremely strong magnetic force. (The ELM-600 has a lifting capacity of 600 kg and a weight of 22.0 kg. In contrast, equivalent products made in Japan weigh 33.0 kg.) ■ The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■ Compared to other products, the strong magnetic force with a safety factor of 3.5 times has further improved safety. ■ Its compact and lightweight design makes it easy to use and enhances work efficiency. ■ Repair and regular inspections (for a fee) are available. ■ Manufacturer's 3-year warranty. ■ Covered by product liability insurance. *For more details, please request documentation or view the PDF data available for download.

• Processing Jig

Since its launch in 1995, it has continued to be loved by customers worldwide. Industry-leading safety factor of 3.5 times, with a 16.6% increase in magnetic force compared to competitors. Thanks to patented technology, it has been further miniaturized compared to conventional products, with a weight reduction of up to 54.7% compared to competitors and a maximum decrease of 42.8% in the adsorption surface area compared to competitors. 【Features】 ■ Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting extremely strong magnetic force. (The ELM-600 has a lifting capacity of 600 kg with a weight of 22.0 kg. In contrast, equivalent Japanese products weigh 33.0 kg.) ■ The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■ Compared to other products, the strong magnetic force with a safety factor of 3.5 times has further improved safety. ■ Its compact and lightweight design makes it easy to use and enhances work efficiency. ■ Repair and regular inspections (for a fee) are available. ■ Manufacturer's three-year warranty. ■ Covered by product liability insurance. *For more details, please request materials or view the PDF data available for download.

• Processing Jig

Since its launch in 1995, it has been continuously loved by customers worldwide. Industry-leading safety factor of 3.5 times Magnetic force increased by 16.6% compared to competitors Thanks to patented technology, it has been further miniaturized compared to conventional products Weight reduced by up to 54.7% compared to competitors Adhesive surface area decreased by up to 42.8% compared to competitors 【Features】 ■ Developed a unique magnetic circuit, this lifting magnet is very compact and lightweight while boasting extremely strong magnetic force. (The ELM-600 has a lifting capacity of 600 kg and a weight of 22.0 kg. In contrast, equivalent Japanese products weigh 33.0 kg.) ■ The use of permanent magnets (rare earth neodymium NeFeB magnets) eliminates the need for a power supply. This means there is no risk of failure in electrical wiring systems. ■ Compared to other products, the strong magnetic force with a safety factor of 3.5 times has further improved safety. ■ Its compact and lightweight design makes it easy to use and enhances work efficiency. ■ Repair and regular inspection (for a fee) are available. ■ Manufacturer's 3-year warranty ■ Covered by product liability insurance *For more details, please request documentation or view the PDF data available for download.

• Processing Jig

Ideal for holding dial gauges! The arm can be easily positioned and fixed freely. It can be easily fixed to machine tables or steel-based workpieces with a permanent magnet.

• Other measurement, recording and measuring instruments

This is an electric stand that can be fixed with a powerful magnet base with a holding force of 80 kg, and it also has a flexible arm, allowing you to direct the light freely.

• Processing Jig

It is a very inexpensive and convenient safety guard.

• Glasses and goggles

The Fast Tech Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to sharpen drills ranging from 3mm to 20mm to a two-flute relief angle with a split point (X-shining) in the same way. By holding the drill in a collet holder and positioning it, you only need to insert it into the sharpening unit, and it will sharpen to the two-flute relief angle and split point (X-shining). The unique patented technology with a built-in bearing holder prevents collet wear, so there is no worry about drill misalignment. You can also adjust the chisel width by adjusting the second sharpening unit. It easily revives broken drills and those that have lost their cutting edge, contributing to cost reduction and efficiency within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to sharpen carbide drills. Note: Drills that are broken and have no groove left, or those that are too short to be held by the collet, cannot be sharpened. [For more details, please download the catalog or feel free to contact us.]

• drill

The FastTech X Shinning Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to grind the tips of drills ranging from 12mm to 26mm to a 2-flute relief angle with a split point (X Shinning) in the same way. (By adding a collet, it can sharpen drills up to 7mm to 32mm.) By holding the drill in a collet-equipped holder and positioning it, you only need to insert it into the sharpening unit to grind the first and second relief angles and form the split point (X Shinning). As a result, it produces drills with excellent cutting performance. Additionally, the patented unique bearing-integrated holder prevents collet wear, so there is no concern about drill misalignment. The second sharpening unit can also be adjusted to modify the chisel width. It easily rejuvenates broken drills or drills that have lost their cutting edge, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but by using the separately sold SDC wheel, carbide drills can also be sharpened. Note: Drills that are broken and have no flutes left, or drills that are too short to be held by the collet, cannot be sharpened.

• drill

The Fast Tech Drill Sharpener can grind drills from 3mm to 20mm into an optimal flat shape for thin plate drilling, regardless of whether the operator is a beginner or a veteran. Furthermore, by grinding the second relief angle, it can also grind to a split point (X-shining), making it a revolutionary drill sharpener. By holding the drill in a collet holder and positioning it, you simply insert it into the grinding unit to grind the flat shape, the second relief angle, and the split point (X-shining). The holder, which incorporates unique patented technology with built-in bearings, prevents collet wear, eliminating concerns about drill misalignment. You can also adjust the chisel width by adjusting the second grinding unit. Broken drills that are not used in the factory and drills that have lost their cutting edge can be easily restored, contributing to cost reduction and efficiency within the company. A CBN wheel for high-speed steel drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or drills that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

• drill

The Fast Tech Drill Grinder can be used by anyone from beginners to veterans to grind drills from 7mm to 32mm into an optimal shape for thin plate drilling. Additionally, by grinding the second relief angle, it can be ground into a split point (X-shining), making it a revolutionary drill grinding machine. By holding the drill in a collet holder and positioning it, you only need to insert it into the grinding unit to grind the shape, the second relief angle, and the split point (X-shining). The holder with built-in bearings, using our unique patented technology, prevents collet wear, so there is no concern about drill misalignment. You can also adjust the chisel width by adjusting the second grinding unit. Broken drills that are not being used in the factory and drills that have become dull can be easily revived, contributing to cost reduction and streamlining within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or drills that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

• Grinding Machine

The Fast Tech Flat Three-Stage Drill Grinding Machine is a revolutionary drill grinder that allows anyone, from beginners to veterans, to grind drills from 2mm to 13mm into a flat shape with a three-stage relief angle, optimized for high-speed machining. Due to its shape being suitable for high-speed machining, it is ideal for drills used in drilling operations on machining centers. The grinding method involves holding the drill in a collet-equipped holder, positioning it, and then simply inserting it into the grinding unit to grind the first, second, and third relief angles. With a unique patented technology that incorporates bearings in the holder, it prevents collet wear, eliminating concerns about drill misalignment. It easily rejuvenates broken drills and those that have lost their cutting edge, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no flutes left, or those that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

• Grinding Machine

The Fast Tech Flat Three-Stage Drill Grinding Machine is a revolutionary drill grinder that allows anyone, from beginners to veterans, to grind drills ranging from 12mm to 26mm into an optimal flat shape for high-speed machining. (By adding a collet, it can grind drills up to 7-32mm.) Due to its shape suitable for high-speed machining, it is ideal for drills used in drilling operations on machining centers. The grinding method involves holding the drill with a collet-equipped holder, positioning it, and then simply inserting it into the grinding unit to grind the first, second, and third reliefs. With its unique patented technology of a bearing-integrated holder, it prevents collet wear, eliminating concerns about drill misalignment. It easily rejuvenates broken drills and those with diminished cutting performance that are not being used in the factory, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or those that are too short to be grasped by the collet, cannot be ground. [For more details, please refer to the catalog.]

• Grinding Machine

The Fastex Three-Rake Drill Sharpener EDSG-313 is a revolutionary drill sharpening machine that can grind drills from 3mm to 13mm into a three-rake shape, ensuring consistent results whether operated by a novice or an experienced user. It sharpens drills with a three-rake design, which is also adopted by the Nachi SG-ESS drill. The three-rake shape is a thinning design for drills without a chisel tip, offering excellent concentricity and high drilling precision. However, due to chipping issues, it is not suitable for carbide drills. The sharpening method involves holding the drill in a collet-equipped holder for positioning, and then setting the sharpening unit to match the drill diameter. After that, simply inserting the drill into the sharpening unit will grind it into the three-rake shape. The holder, equipped with our unique patented bearing technology, prevents collet wear, eliminating concerns about drill misalignment. It allows for the easy regeneration of broken drills and those with diminished cutting performance that are not being used in the factory, contributing to cost reduction within the company. Note: Drills that are broken and lack a groove, or those that are too short to be grasped by the collet, cannot be sharpened. [For more details, please refer to the catalog.]

• Grinding Machine

[Video streaming is available on our website http://www.firstec.co.jp] The Fast Tech drill and end mill cutting machine for sizes ranging from 3mm to 16mm is a revolutionary cutting machine that allows anyone, from beginners to veterans, to easily cut high-speed steel (HSS) and carbide drills and end mills. By utilizing compressed air for forced air cooling, the cutting time can be significantly reduced. The standard included wheel is an SDC wheel for carbide, but a separately sold CBN wheel can also cut HSS.

• Grinding Machine

Uses high-quality industrial diamonds. The cutting edges are firmly established thanks to excellent electroplating technology, providing outstanding cutting performance. Ideal for grinding and deburring of hard alloys, glass, and other non-ferrous metals.

• Other cutting tools

■Easy-to-use ratchet mechanism ■Convenient mini size for portability ■S-shaped hooks are rust-resistant and have a gentle vinyl coating for your belongings

• Other work tools