FIRSTEC CORPORATION List of Products and Services

【Easy to Grind for Anyone】 The FastTech drill sharpening machine is a revolutionary device that allows anyone to easily sharpen drills to X-shining. Most workpieces can be drilled without a pilot hole. 【X-Shining】 Thanks to patented technology, the secondary relief angle can be sharpened, resulting in a split point (X-shining). 【Straight Flute】 The straight flute drill sharpening machine for steel frames sharpens to a straight shape with a secondary relief angle and split point. 【Chuck with Steel Collet】 A high-precision steel collet is used for chucking the drill. 【High Precision and Durability with Built-in Bearings】 To prevent collet wear, bearings are inserted into the collet holder and sharpening unit. 【Adjustable Chisel Section of the Drill】 By adjusting the amount of sharpening on the secondary relief, the chisel section can be adjusted. 【High Precision and Durability with Electroplated Wheels】 For high-speed steel, CBN electroplated wheels are provided, and for carbide, SDC electroplated wheels are available. With normal use, approximately 5,000 drills can be sharpened. 【Exhibition Demonstrations and Demo Machine Rentals】 We participate in exhibitions in various regions and conduct demonstration performances. We also offer demo machine rentals through tool dealers.

The FastTech X Shinning Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to grind the tips of drills ranging from 12mm to 26mm to a 2-flute relief angle with a split point (X Shinning) in the same way. (By adding a collet, it can sharpen drills up to 7mm to 32mm.) By holding the drill in a collet-equipped holder and positioning it, you only need to insert it into the sharpening unit to grind the first and second relief angles and form the split point (X Shinning). As a result, it produces drills with excellent cutting performance. Additionally, the patented unique bearing-integrated holder prevents collet wear, so there is no concern about drill misalignment. The second sharpening unit can also be adjusted to modify the chisel width. It easily rejuvenates broken drills or drills that have lost their cutting edge, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but by using the separately sold SDC wheel, carbide drills can also be sharpened. Note: Drills that are broken and have no flutes left, or drills that are too short to be held by the collet, cannot be sharpened.

The Fast Tech Drill Sharpener is a revolutionary drill sharpening machine that allows anyone, from beginners to veterans, to sharpen drills ranging from 3mm to 20mm to a two-flute relief angle with a split point (X-shining) in the same way. By holding the drill in a collet holder and positioning it, you only need to insert it into the sharpening unit, and it will sharpen to the two-flute relief angle and split point (X-shining). The unique patented technology with a built-in bearing holder prevents collet wear, so there is no worry about drill misalignment. You can also adjust the chisel width by adjusting the second sharpening unit. It easily revives broken drills and those that have lost their cutting edge, contributing to cost reduction and efficiency within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to sharpen carbide drills. Note: Drills that are broken and have no groove left, or those that are too short to be held by the collet, cannot be sharpened. [For more details, please download the catalog or feel free to contact us.]

The Fast Tech Drill Sharpener can grind drills from 3mm to 20mm into an optimal flat shape for thin plate drilling, regardless of whether the operator is a beginner or a veteran. Furthermore, by grinding the second relief angle, it can also grind to a split point (X-shining), making it a revolutionary drill sharpener. By holding the drill in a collet holder and positioning it, you simply insert it into the grinding unit to grind the flat shape, the second relief angle, and the split point (X-shining). The holder, which incorporates unique patented technology with built-in bearings, prevents collet wear, eliminating concerns about drill misalignment. You can also adjust the chisel width by adjusting the second grinding unit. Broken drills that are not used in the factory and drills that have lost their cutting edge can be easily restored, contributing to cost reduction and efficiency within the company. A CBN wheel for high-speed steel drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or drills that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

The Fast Tech Flat Three-Stage Drill Grinding Machine is a revolutionary drill grinder that allows anyone, from beginners to veterans, to grind drills from 2mm to 13mm into a flat shape with a three-stage relief angle, optimized for high-speed machining. Due to its shape being suitable for high-speed machining, it is ideal for drills used in drilling operations on machining centers. The grinding method involves holding the drill in a collet-equipped holder, positioning it, and then simply inserting it into the grinding unit to grind the first, second, and third relief angles. With a unique patented technology that incorporates bearings in the holder, it prevents collet wear, eliminating concerns about drill misalignment. It easily rejuvenates broken drills and those that have lost their cutting edge, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no flutes left, or those that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

The Fastex Three-Rake Drill Sharpener EDSG-313 is a revolutionary drill sharpening machine that can grind drills from 3mm to 13mm into a three-rake shape, ensuring consistent results whether operated by a novice or an experienced user. It sharpens drills with a three-rake design, which is also adopted by the Nachi SG-ESS drill. The three-rake shape is a thinning design for drills without a chisel tip, offering excellent concentricity and high drilling precision. However, due to chipping issues, it is not suitable for carbide drills. The sharpening method involves holding the drill in a collet-equipped holder for positioning, and then setting the sharpening unit to match the drill diameter. After that, simply inserting the drill into the sharpening unit will grind it into the three-rake shape. The holder, equipped with our unique patented bearing technology, prevents collet wear, eliminating concerns about drill misalignment. It allows for the easy regeneration of broken drills and those with diminished cutting performance that are not being used in the factory, contributing to cost reduction within the company. Note: Drills that are broken and lack a groove, or those that are too short to be grasped by the collet, cannot be sharpened. [For more details, please refer to the catalog.]

The Fast Tech Drill Grinder can be used by anyone from beginners to veterans to grind drills from 7mm to 32mm into an optimal shape for thin plate drilling. Additionally, by grinding the second relief angle, it can be ground into a split point (X-shining), making it a revolutionary drill grinding machine. By holding the drill in a collet holder and positioning it, you only need to insert it into the grinding unit to grind the shape, the second relief angle, and the split point (X-shining). The holder with built-in bearings, using our unique patented technology, prevents collet wear, so there is no concern about drill misalignment. You can also adjust the chisel width by adjusting the second grinding unit. Broken drills that are not being used in the factory and drills that have become dull can be easily revived, contributing to cost reduction and streamlining within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or drills that are too short to be held by the collet, cannot be ground. [For more details, please refer to the catalog.]

The Fast Tech Flat Three-Stage Drill Grinding Machine is a revolutionary drill grinder that allows anyone, from beginners to veterans, to grind drills ranging from 12mm to 26mm into an optimal flat shape for high-speed machining. (By adding a collet, it can grind drills up to 7-32mm.) Due to its shape suitable for high-speed machining, it is ideal for drills used in drilling operations on machining centers. The grinding method involves holding the drill with a collet-equipped holder, positioning it, and then simply inserting it into the grinding unit to grind the first, second, and third reliefs. With its unique patented technology of a bearing-integrated holder, it prevents collet wear, eliminating concerns about drill misalignment. It easily rejuvenates broken drills and those with diminished cutting performance that are not being used in the factory, contributing to cost reduction within the company. A CBN wheel for HSS drills is included as standard, but if you use the optional SDC wheel, it is also possible to grind carbide drills. Note: Drills that are broken and have no groove left, or those that are too short to be grasped by the collet, cannot be ground. [For more details, please refer to the catalog.]

**Clearance Sale! Up to 63% OFF** We are selling over 60 stock items, including precision vises, magnetic equipment, scroll chucks, LED lights, and punch formers, at discounts of up to 63% off the regular price! **Limited Stock! First Come, First Served!** - The sale will end as soon as stock runs out. - This is a limited-time offer until Thursday, July 31, 2025. **Product Warranty & Maintenance** Even for clearance items, the product warranty applies as usual. We also offer maintenance services such as repairs, so you can rest assured. **Regarding Product Discontinuation** Some products will be discontinued, but we have alternative products available. **About Pricing** Prices will return to normal once stock runs out or the promotional period ends. Take advantage of this opportunity to purchase related products necessary for your daily processing at a great price! *Clearance Sale Overview* - **Period**: Until Thursday, July 31, 2025 (Ends when stock runs out) - **Eligible Products**: Over 60 machine tool products, including precision vises, magnetic equipment, scroll chucks, etc. - **Discount Rate**: Up to 63% OFF - For more details, please download the PDF or contact us.