We will hold a 'delivery exhibition.' Please feel free to reach out!

We offer contract processing for analytical chips for electrochemical (bio) measurements.

Are you facing any of these issues? - It's difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven't put it into a drawing, but can you provide consultation? - I want to achieve fine wiring, but I would like advice on film materials. - Can you accept just pattern processing? - Can you handle line and space (L/S) down to 10μm? 1) We realize fine pattern processing. We achieve fine patterning through photolithography, etching, and metal masks. We select the best processing method and resist according to the customer's requirements. 2) We can provide integrated production from substrate procurement to film formation. At Adachi New Industry, we can respond to custom orders consistently from substrate procurement to film processing, fine processing, and chip processing. It is also possible to cut into any shape and ship as components. However, we need detailed drawings, etc. 3) We accommodate cleanroom requirements. The working environment maintains the necessary cleanliness for each stage from film formation to inspection, and we have a thorough system in place to address minor film defects (such as foreign substances in the film).

• Surface treatment contract service

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary surface with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film that utilizes the principle of interference by alternately depositing dielectrics with different refractive indices, reducing the reflectance of specific wavelengths and improving transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Is there a way to improve visibility and achieve clearer image quality? - Looking to reduce internal reflections and prevent flare? - Want to increase light levels to contribute to energy savings? - Can we design an anti-reflective coating (AR) that takes the angle of incidence into account?

• Other optical parts
• lens
• Sensors

We propose silicone adhesives, potting materials, and encapsulants that can also be used for conventional general-purpose devices requiring heat dissipation.

Adachi New Industry, as a distributor for Momentive, offers various silicone solutions for thermal management. 【1】Thermal Gap Filler Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. It is liquid and can be automatically applied using a dispenser. This silicone is ideal for customers facing issues with stress relief and thermal control. 【2】Thermal Silicone Adhesive With excellent thermal conductivity and physical/chemical stability, it allows for thin film application, effectively reducing thermal resistance. It is optimal as a thermal interface adjacent to heating elements, heat spreaders, and heat sinks. 【3】Thermal Potting Compound Silicone sealants exhibit thermal conductivity and contribute to the long-term reliability of devices that generate heat. We offer a range of materials that cure into soft rubber or gel-like forms, including low to medium viscosity products suitable for potting applications. 【4】Thermal Silicone Grease Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. Its ability to be applied as a thin film significantly reduces thermal resistance.

• Rubber
• Other polymer materials

This is a thin film coating agent designed to protect electronic printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry, as a special distributor for Momentive, offers various silicone products for electrical and electronic components. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked under black light.

• Rubber
• Other polymer materials

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

It is an optical filter that selectively transmits ultraviolet wavelengths (255 nm) while blocking light of other wavelengths (using a substrate from Gohsui Seiko Glass).

Applications in the ultraviolet region are on the rise. At Itsuki Seiko Glass, we have developed filter glass substrates in the IHU series that have a transmission limit wavelength in the ultraviolet range and improved weather resistance to ultraviolet light. Recently, we have successfully deposited dielectric multilayer films to create bandpass filters in the ultraviolet region, as shown in the chart (measured data). (Are you facing these challenges?) ■ I want to transmit only specific wavelengths using aspheric lenses or lens arrays. ■ Is it possible to achieve pinpoint transmission at the UV-C wavelength of 254 nm? ■ Given the limited substrates and deposition materials, is anti-reflective coating feasible? ■ I've heard that measurement difficulty after film deposition is high; can you accommodate this? ■ Is it true that controlling the thickness in the UV region is very challenging due to its thinness? Based on our achievements in visible light, we can achieve high transmission rates in the ultraviolet wavelength range by controlling the deposition process. Additionally, by leveraging our ability to mold aspheric lenses and lens arrays in combination with our deposition technology, we can propose new applications.

• Other optical parts
• Other semiconductor manufacturing equipment
• Sensors

We would like to introduce the "96 Non Jacket Tubes 1.0ml Type" that we handle. The tube has a rotation prevention feature that is compatible with automatic cap removal machines. Using a pickup stick makes it easy to attach and detach the cap. Please feel free to contact us when you need assistance. 【Features】 ■ Rack lid lock function ■ Rotation prevention feature ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor *For more details, please refer to the related links or feel free to contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

In February of this year, we inquired about "paperlogic" using the Ministry of Economy, Trade and Industry's gray zone resolution system regarding the "provision of electronic contract services to the construction industry," and received a response stating that "paperlogic meets the standards related to construction contracts under the Construction Business Act Enforcement Regulations (Article 13-4, Paragraph 1, Item 1 (h) and Paragraph 2)." ◆ Accelerating DX in the Construction Industry with 'Official Approval' The construction industry faces challenges in digitizing contract operations due to the complexity of contracts, the presence of numerous stakeholders, and legal requirements and security concerns. However, due to the nature of the business, detailed contract operations occur frequently in the construction industry. Therefore, by digitizing contract operations, this sector can benefit significantly from cost reductions, such as stamp duty and labor costs, as well as shortened timeframes for contract execution. ◆ Package Plans for the Construction Industry Also Available paperlogic offers the 'paperlogic Construction Document DX Pocket' to facilitate smoother transactions between general contractors and partner companies. Please feel free to try our trial service from the "Service Application" section.