I added the 'comb-shaped electrode - gold pattern (Au)' to the artisan pattern.

We offer contract processing for analytical chips for electrochemical (bio) measurements.

Are you facing any of these issues? - It's difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven't put it into a drawing, but can you provide consultation? - I want to achieve fine wiring, but I would like advice on film materials. - Can you accept just pattern processing? - Can you handle line and space (L/S) down to 10μm? 1) We realize fine pattern processing. We achieve fine patterning through photolithography, etching, and metal masks. We select the best processing method and resist according to the customer's requirements. 2) We can provide integrated production from substrate procurement to film formation. At Adachi New Industry, we can respond to custom orders consistently from substrate procurement to film processing, fine processing, and chip processing. It is also possible to cut into any shape and ship as components. However, we need detailed drawings, etc. 3) We accommodate cleanroom requirements. The working environment maintains the necessary cleanliness for each stage from film formation to inspection, and we have a thorough system in place to address minor film defects (such as foreign substances in the film).

• Surface treatment contract service

This is a thin film coating agent designed to protect electronic printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry, as a special distributor for Momentive, offers various silicone products for electrical and electronic components. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked under black light.

• Rubber
• Other polymer materials

This is a "comb-shaped electrode chip" made by thin-film pattern processing of various metals. We handle everything from electrode configuration to thin-film processing and chip processing in a consistent system.

Are you troubled by such issues? - It’s difficult to manage delivery times when ordering thin film processing and pattern processing separately. - I haven’t put it into a drawing, but could you provide some consultation? - I want to achieve fine wiring, but I would like advice on the deposition materials. - Can you accept orders for pattern processing alone? - Can you accommodate a line and space (L/S) of 10μm? ■ Microfabrication Technology We realize fine patterning through photolithography, etching, and metal masks. Depending on customer requirements, we select the best processing methods and resists. However, it is necessary to align conditions such as deposition materials, substrates, film thickness, and thin film stacking configurations. Please consult us regarding sub-micron or nanometer level patterns. ■ Small-scale prototyping is also possible. In manufacturing, the cycle of hypothesis and verification is an essential process. No matter how advanced simulation technology becomes, verification cannot be omitted. Therefore, at Adachi New Industry, we are happy to undertake prototyping for characteristic verification. Please contact us first.

• Circuit board design and manufacturing
• Other physicochemical equipment
• Analytical Equipment and Devices

Sputtering is a physical thin film formation technology (PVD) that allows for the coating of metals and dielectrics on the surfaces of substrates such as glass and plastic.

Sputtering is a new surface treatment technology that applies ion engineering, characterized by the absence of pollution issues like those associated with resin plating, and the ability to plate chromium (Cr), which is difficult with vacuum deposition. It can also plate Cr on various engineering plastics other than ABS resin, marking the dawn of a new era in plastic surface treatment with this new technology. In addition to Cr, almost all metals can be used, and it can produce color tones similar to resin-plated Cr, among many other excellent features. As a result, the range of applications is broad, and sputtering products are expected to be widely used for decorative purposes in automobiles, consumer electronics, audio equipment, cosmetics, and more.

• Processing Contract
• Surface treatment contract service

Vacuum deposition is a processing technique that heats and evaporates metals or oxides in a high vacuum to deposit them onto a substrate surface.

Our company has been establishing vacuum deposition technology since the 1950s. A representative deposition metal is aluminum, which is deposited on the surface of glass substrates and plastic molded products, and further coated with oxide films such as SiO2 and TiO2 using electron beam deposition, being utilized as high-reflective mirrors like reflectors.

• Processing Contract
• Surface treatment contract service

The 【 HDA-0100 series 】 currently available from Fukuda Corporation is a "Portable Hydrogen Leak Detector." ■ Compact and lightweight, convenient for carrying (approximately 400 g, including battery) ■ Battery-operated and cordless (continuous usage time of approximately 8 hours) ■ High sensitivity and wide range (0.5 ppm to 5000 ppm) hydrogen measurement is possible in a handy type It has features such as these. "What is a Hydrogen Leak Detector?" It is a tester that can measure leaks in small areas that could not be measured in air leak tests and can also identify leak points. It uses a tracer gas consisting of 5% hydrogen and 95% nitrogen, an industrial mixed gas (non-flammable gas: ISO10156:2017). For more details, please refer to the links below for related links, product information, and catalogs.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.