The material is SUS430/bonded steel plate! It can be attached to the side of a container filled with liquid for heating or insulation purposes.
The "plate heater" is a flat heater that consists of a mica board with a strip-shaped heating wire wrapped around it, insulated between two other mica boards, and further protected by a stainless steel plate as an outer casing. The power supply typically has lead wires coming out from the thickness part or has terminals (M5 bolts) raised on the surface. If there are obstacles such as bolt heads on the mounting surface, it is also possible to pre-process the plate heater with holes or notches to accommodate them. Standard products include a rich lineup such as "PPH-05080" with a length of 80mm and "PPH-15450" with a length of 450mm. 【Specifications (partial)】 ■ Possible width: 25–300mm ■ Possible length: 50mm and up ■ Thickness: 4mm ■ Maximum operating temperature: 350℃ ■ Power supply voltage: 100v/116v/200v/220v/240v ■ Recommended watt density: up to 3.5w/cm2 *For more details, please refer to the PDF document or feel free to contact us.
Inquire About This Product
basic information
【Standard Product Lineup (Partial)】 ■PPH-05080: Width 50mm / Length 80mm / Voltage 220V / Capacity 80W ■PPH-10100: Width 100mm / Length 100mm / Voltage 220V / Capacity 200W ■PPH-12200: Width 120mm / Length 200mm / Voltage 220V / Capacity 500W ■PPH-15200: Width 150mm / Length 200mm / Voltage 220V / Capacity 600W *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
【Application】 ■ For plastic molding molds, rubber molding molds, and T-die sections of extrusion molding machines ■ Can be attached to the sides of containers filled with liquids for heating or insulation purposes *For more details, please refer to the PDF document or feel free to contact us.
catalog（1）
Download All Catalogs
Company information
Proheat Co., Ltd. customizes various electric heaters, including cartridge heaters, to your specified requirements. For "band heaters," we offer options for heating molding machine cylinders, as well as for pipe heating and container heating. For "plate heaters," we provide solutions for molding dies and heating plates. In addition, we handle "silicone rubber heaters" and "sheath heaters," creating heating and moisture retention solutions.
![Single End Radiant Tube Burner [TRF Burner]](https://image.mono.ipros.com/public/product/image/c08/2000793597/IPROS40624651388633756578.png?w=280&h=280)
![Inclined immersion type electric heater holding furnace [oxide reduction type]](https://image.mono.ipros.com/public/product/image/c7e/2000804160/IPROS67190141477188481135.jpeg?w=280&h=280)
![Challenging Decarbonization Technologies! Introduction to the Thermal Technology Research Institute [Latest Information for 2026!]](https://image.mono.ipros.com/public/product/image/3d5/2000834196/IPROS99631596500298700026.jpeg?w=280&h=280)
![Introduction of decarbonization and low-carbon technology for thermal equipment [Hydrogen Gas Burner 2025]](https://image.mono.ipros.com/public/product/image/55c/2000954311/IPROS89619989136030453322.jpeg?w=280&h=280)
![Latest! Introduction of decarbonization and low-carbon technology for thermal equipment [Exhibition Participation]](https://image.mono.ipros.com/public/product/image/d25/2001437189/IPROS51685098099233337342.png?w=280&h=280)