List of Design and production support products
- classification：Design and production support
3931～3960 item / All 12291 items
Isn't the layout of the insulation material time-consuming?
- Other CAD
- Other services
A circuit model specially adjusted to faithfully mimic the hysteresis effect has been developed!
- simulator
Create a digital twin for a single process simulator in steady mode, hydraulic sizing mode, and dynamic simulation.
- simulator
![[Case Study of Problem Solving] Rew...](https://image.mono.ipros.com/public/product/image/85f/2000764816/IPROS99684923308373954649.jpeg?w=280&h=280){kind=small}
Initial defective products can be refurbished by our company! You can also leave the new maintenance (refurbishment) to us.
- Calibration and repair
- Other contract services
Announcement of the establishment of new bases in the east and west.
Our company provides services such as inspection, renewal, and kitting, primarily focusing on repair and maintenance support for electronic devices in collaboration with manufacturers. 1. Eastern Japan Repair Center We are operating in Toyosu, Koto-ku, Tokyo, and have completed renovation work in part of the area used as a warehouse in Shinozaki-cho, Edogawa-ku, allowing us to conduct operations there as well. The work area can be partitioned with vinyl curtains to prevent dust contamination and is equipped to handle tasks requiring electrostatic measures. The first and second floors serve as temporary storage for products and parts, while the third floor is designated as the work area. Work area: Approximately 150 square meters Work contents: Environmental testing, functional (performance) inspection, inspection, kitting, rework tasks, etc. Capacity: 100 to 10,000 units/month We can also respond flexibly to requests outside of the above. 2. Western Japan Repair Center We have established a new base near the Western Japan Repair Center in Itami City, Hyogo Prefecture. It can be contracted as a repair and maintenance base. Total floor area: Approximately 1,000 square meters (warehouse + work area) Work contents: Inspection, rework tasks, assembly, kitting, etc. Capacity: 100 to 10,000 units/month Please feel free to consult with us.
In 3D printing, compared to traditional methods, there is a high degree of design freedom, and mass production is also possible!
- 3D Printer
【Material sample available】This is a resin material that allows for large-scale modeling at a low cost. It is ideal for producing prototypes at an affordable price!
- 3D Printer
【Material sample available】Despite its low price, it is an excellent material with outstanding durability and water resistance, as well as superior toughness and strength, making it often used for fun...
- 3D Printer
We will automate the cooling, transportation, and primary processing after extrusion to reduce labor costs!
- Machinery and equipment installation/dismantling/relocation
![[Free Webinar] NC Programming Autom...](https://image.mono.ipros.com/public/product/image/2ce/2001193228/IPROS13834976476380162237.jpg?w=280&h=280){kind=small}
<Manufacturing DX Webinar> Challenges of labor shortages, declining productivity, and cost reduction!! Solved through complete automation of NC programming!!
- Other CAM related software
Preliminary predictions with CAE static analysis! A production system that pursues high efficiency and high quality.
- 3D CAD
We are developing efforts to improve production efficiency! We have gained the trust of many customers.
- 3D CAD
If you request directly from us, a cost reduction of about 25% is possible!
- 3D CAD
Introduction to the simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.
- simulator
- Thermo-fluid analysis
- Contract Analysis
A customer case study of KYB Corporation has been published! "Fluid Analysis (CFD) of a Vane Pump Using SimericsMP+ (formerly known as Pumplinx)"
As a user case of Simerics MP+, we have published a fluid analysis (CFD) of a vane pump using Simerics MP+ (formerly known as Pumplinx), with the cooperation of the people from the Foundation Technology Research Institute of KYB Corporation!
![[Case Study] Cause of Liquid Leakag...](https://image.mono.ipros.com/public/product/image/8d8/2001227851/IPROS66933081960524905201.png?w=280&h=280){kind=small}
Liquid leakage from the gap between the mixer shaft and the tank! A unique case study of problem-solving by our company.
- Analysis Services
A component that branches one pipe into two or three! Introducing our branching pipe prototype development service.
- Prototype Services
Start with a free 3D cutting NC simulator! The lathe has finally arrived!
- simulator
Distributes and supplies reference signals such as 10MHz. Low cost and high performance. A distribution amplifier for distributing reference signals with 8 output ports!
- Calibration and repair
Generate reference signals synchronized to frequency national standards using GPS as an intermediary! Achieve frequency remote calibration through contracts with calibration service providers!
- Calibration and repair
Factor 44 achieves even higher molding precision and reproducibility with industrial-grade quality.
- 3D Printer
Quickly and efficiently select and configure subassemblies! Support for rapid design and estimation.
- Other CAD related software
The use of thermal fluid simulation is advancing in various aspects of plant design, such as stratified air conditioning, heat stroke prevention, and ensuring cleanliness, etc.
- Thermo-fluid analysis
Asia's first! 'PA12W White | MJF' overwhelming strength and weather resistance
- 3D Printer
On-site first scaffolding maintenance management! Providing equipment and facilities that ensure safety.
- Calibration and repair
We provide a service for 3D scanning of physical objects for both corporate and individual customers. The standard size starts at 20,000 yen per item.
- 3D Printer
Compatible with full-color acrylic! Introducing available 3D printers.
- 3D Printer
Introducing 3D printers that can handle titanium, allowing for the creation of structures with the strength of metal parts!
- 3D Printer
Introduction to a simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.
- simulator
- Thermo-fluid analysis
- Contract Analysis
A customer case study of KYB Corporation has been published! "Fluid Analysis (CFD) of a Vane Pump Using SimericsMP+ (formerly known as Pumplinx)"
As a user case of Simerics MP+, we have published a fluid analysis (CFD) of a vane pump using Simerics MP+ (formerly known as Pumplinx), with the cooperation of the people from the Foundation Technology Research Institute of KYB Corporation!
![[Performance Introduction] Lubricat...](https://image.mono.ipros.com/public/product/image/649/2000772701/IPROS61581863882980269865.png?w=280&h=280){kind=small}
We will introduce a case where we minimized the customer's burden necessary for considering changes in the operation of lubricant manufacturing equipment and carried out the design and construction!
- Machinery and equipment installation/dismantling/relocation