List of Scientific and Physics Equipment products
- classification：Scientific and Physics Equipment
496～540 item / All 35297 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
Introducing a case study on resolving bridging at the outlet of the raw material hopper in the conveying system.
- Mixer/agitator
Introducing a case where we assisted with the selection and placement planning of Brodisk models.
- Mixer/agitator
Solving user challenges in one go! Introducing examples of improving carbon fluidity.
- Mixer/agitator
Proposals tailored to the user's conditions based on past experiences! Introducing installation examples of the Brodisk Mini.
- Mixer/agitator
Measures against rat holes! Introducing a case where a Brody disk was installed in a feed tank.
- Mixer/agitator
Introducing a case where all four Brody disks (mini) were simultaneously turned ON/OFF! The bridge issue has been resolved.
- Mixer/agitator
Two Brody Disk Minis installed at different heights! Here is an example of installation in the raw material hopper of a tablet press.
- Mixer/agitator
Air ON with 8 Brodisks in pairs with a time difference! Introducing case studies.
- Mixer/agitator
- Other powder equipment
Easily solve powder bridging! We will introduce case studies of BroaDisk implementation.
- Mixer/agitator
Easily solve powder bridging! We will inform you of a suitable implementation plan considering costs.
- Mixer/agitator
Can be used with inert gases such as nitrogen gas or argon gas instead of regular air!
- Mixer/agitator
Introducing a case where a total of 6 Brodisk Mini units were installed in 2 stages, with 3 units each.
- Mixer/agitator
Most cases, such as bridges and rat holes, can be easily resolved with this equipment!
- Mixer/agitator
Easily solve unsolvable powder bridges! No more expensive equipment needed.
- Mixer/agitator
We can provide guidance on model selection, placement, and control according to the user's requirements!
- Mixer/agitator
If we can take a look at the hopper diagram and contents, we can provide a cost-conscious introduction plan!
- Mixer/agitator
Place the Brody Disk Mini to mitigate the risk of clogging at the discharge port! Introducing a case study on solving rat holes.
- Mixer/agitator
We will introduce a case where four units were simultaneously turned on for cost efficiency, using the standard type of blow disk.
- Mixer/agitator
Increase aeration frequency! Introducing a case study that solved the "unmanageable bridge."
- Mixer/agitator
Introducing a case that solved the issue of poor incineration ash discharge with 8 Brodisk standard type (BD-15) units arranged!
- Mixer/agitator
Introducing a case where three Brody Disk Minis are operated simultaneously in air intermittent operation, installed on a screw conveyor!
- Mixer/agitator
No effect even with hammering! Install the Brodisk and Brodisk Mini to solve the problem.
- Mixer/agitator
A bridge in the hopper of the quantitative feeder! After a few seconds of air ON, the bridge collapse was resolved and everything is good.
- Mixer/agitator
Easily solve powder bridging! We will introduce case studies of BroaDisk.
- Mixer/agitator
- Other powder equipment
Easily solve powder bridging! We will introduce case studies of BroaDisk implementation.
- Mixer/agitator
Easily solve powder bridging! We will introduce case studies of BroaDisk.
- Mixer/agitator
Resolving blockages near the discharge section! Here is a case where the air ON frequency for the lower four units was increased.
- Mixer/agitator
Guidance on the arrangement of the Brodisk and its control plan! Introducing a case that resolved the bridging of adhesive fine powder.
- Mixer/agitator
Our company can provide the best solutions for users based on our extensive experience!
- Mixer/agitator
This equipment is used in various ways for bridge measures against crushed materials of various resins!
- Mixer/agitator
Introducing a case where we are struggling with the discharge of feed!
- Mixer/agitator
A case where a mobile container could not discharge its contents due to the rat-hole phenomenon!
- Mixer/agitator
Introducing an example of a dust collector installed for the cutting dust generated in the resin cutting process!
- Mixer/agitator
Installed in the lower hopper of the dismantling machine to improve discharge troubles! A case resolved by the installation position.
- Mixer/agitator
Installing a Brody Disk in a salt manufacturing plant to prevent bridging! Case study of trouble resolution.
- Mixer/agitator
PS recycling equipment's crushing material hopper! Here we introduce an example of how this equipment solved bridging issues.
- Mixer/agitator
We have solved the bridging phenomenon that occurs in the hopper of the quantitative supply screw feeder in one go!
- Mixer/agitator
The purpose is to ensure thoroughness, especially since it is not a case of concern regarding the bridge, so it is installed only near the discharge area!
- Mixer/agitator
If you send us the hopper drawings, we can provide guidance on a reasonable layout, etc.!
- Mixer/agitator
Configuration and other aspects are important! We provide detailed advice from our company to achieve problem resolution!
- Mixer/agitator
Successful results and adoption! A case of installing our product at the corners of gentle slopes and gentle slopes.
- Mixer/agitator
Eliminating the bridge phenomenon! Introducing a case study of a dry fine powder hopper for water-saturated clay.
- Mixer/agitator
Cost-focused control! Introducing a case that eliminated rat-hole residuals.
- Mixer/agitator
Install a broad disk on each inclined surface to solve the bridge and adhesion issues.
- Mixer/agitator
Install a Brody Disk Mini near the discharge area! Example of use by a customer performing sandblasting.
- Mixer/agitator