We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Analysis.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Analysis(si) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.

Analysis Product List

91～120 item / All 193 items

Displayed results
Extreme point measurement

Extreme point measurement

XRD: X-ray diffraction method

Pole figure measurement is a method that focuses on specific crystal planes and evaluates the distribution of crystal orientations by directing X-rays from various directions onto the sample. The detector is fixed at the diffraction angle (2θ) of the crystal plane of interest, and the two parameters, α (the tilt angle of the sample) and β (the in-plane rotation angle of the sample), are varied to measure crystal planes tilted in all directions. This indicates that the crystal orientations are concentrated in the directions where high diffraction intensity is observed. Additionally, the measurement results are represented in a pole figure as shown in the diagram at the bottom right.

  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of electronic components and materials using TEM.

Analysis of electronic components and materials using TEM.

TEM (Transmission Electron Microscope) meets a wide range of requirements for observing failure sites of electronic components, length measurements, elemental analysis, crystal structure analysis, and material evaluation.

TEM can perform not only high-magnification observation but also elemental analysis using EDS and EELS, as well as analysis of crystal structure, surface orientation, lattice constants, and more through electron diffraction.

  • Contract Analysis
  • Other semiconductors
  • Other contract services
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Information Magazine 201905-01 Crystal Orientation Analysis with High Spatial Resolution

Technical Information Magazine 201905-01 Crystal Orientation Analysis with High Spatial Resolution

The technical information magazine The TRC News provides the latest information on analytical techniques that are useful for research and development, solving production troubles, and quality control.

**Abstract** Using the TEM-based crystal orientation analysis system "ASTAR," it is possible to achieve higher spatial resolution than that of SEM-based EBSD (with spatial resolution of various EBSD methods being around tens of nanometers, while the ACOM-TEM method using ASTAR achieves 2 to 5 nm). Additionally, it is characterized by the ability to identify a greater variety of crystal structures. By obtaining crystal orientation maps, crystal phase maps, and grain size distributions that are difficult to acquire through conventional TEM analysis, quantitative interpretation becomes possible. Furthermore, since measurements can be taken in the same field of view as TEM observations, it allows for complex analyses combined with (S)TEM-EDX/EELS and the use of in-situ TEM. **Table of Contents** 1. Introduction 2. ACOM-TEM Method Using ASTAR 3. Examples of Analysis Using ASTAR 4. Conclusion

  • Contract Analysis
  • Contract measurement
  • Technical and Reference Books
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Overview and Characteristics of SNP Analysis

Overview and Characteristics of SNP Analysis

Differences between real-time PCR method and mass array method.

SNP (Single Nucleotide Polymorphism) refers to the parts of the DNA sequence that differ by a single nucleotide among individuals. It is believed that SNPs can lead to different characteristics such as physical traits and are also related to drug response. Therefore, SNP analysis is expected to be applied in personalized medicine. This document introduces the characteristics of real-time PCR and mass array methods among SNP analysis techniques. It is effective to choose the method according to the specific SNP locations, number of SNPs, and their frequencies that need to be investigated.

  • img_B0298_2.jpg
  • img_B0298_3.jpg
  • img_B0298_4.jpg
  • Contract Analysis
  • Contract measurement
  • Contract Inspection
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
★A Must-See for Designers! 【SOLIDWORKS Technical Manual】

★A Must-See for Designers! 【SOLIDWORKS Technical Manual】

Packed with time-saving tips for using SOLIDWORKS! This book compiles techniques to improve work efficiency, from the basics to advanced applications!

Currently, the cumulative sales of the licensed software SOLIDWORKS have surpassed 3 million copies, and it is widely used by many companies in Japan. Have you ever felt while working with SOLIDWORKS that it could run a bit more smoothly? In fact, you can improve your work performance with just a few techniques! We are offering a collection of know-how for SOLIDWORKS users as a free gift! This book is packed with tips for time-saving and efficiency improvement, gathering the essentials for utilizing SOLIDWORKS. *You can view the entire collection of know-how through the PDF download. 【Practical Seminar】Analyze with 3D CAD! SOLIDWORKS CAD Design × Analysis Seminar (Limited to 4 companies per session) ◯ Apply here ◯ https://www.digitaldesign-s.co.jp/seminar/event/dms2019/ (Please note that applications will be accepted on a first-come, first-served basis.) Location: Digital Design Service Co., Ltd. Headquarters Capacity: 4 people ★ For details on the date and time of the event and to apply, please check our website.

  • 3D CAD
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Analysis of Organic EL (OLED) Emission Layer

[Analysis Case] Analysis of Organic EL (OLED) Emission Layer

Quantitative evaluation of the guest in the light-emitting layer and film thickness is possible.

Organic EL displays are advancing towards practical use by leveraging advantages such as high brightness, high-resolution color, and thinness due to their self-emission principle. In the emission layer, guest molecules are doped into host molecules to enhance the emission efficiency. In this study, we identified the emission layer materials for red pixels in organic EL display elements. Additionally, we conducted thickness evaluation of the emission layer using a newly developed step gauge and quantified the guest materials within the emission layer. This allows for qualitative and quantitative analysis of guest molecules in the emission layer, as well as evaluation of the thickness of the emission layer. Measurement methods: TOF-SIMS, TEM, XPS Product field: Displays Analysis purpose: Composition evaluation, identification, thickness evaluation For more details, please download the materials or contact us.

  • C0033_2.png
  • C0033_3.png
  • LCD display
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Information on Cloud Migration Support Services

Information on Cloud Migration Support Services

Cloud migration support service for conducting feasibility studies (implementation viability verification).

We provide cloud migration support services to assist in smooth consideration and decision-making within a limited timeframe. We will listen to your requests regarding cloud implementation and determine the systems/services to be migrated to the cloud based on the refined requests. We will conduct a feasibility study on the core components of the targeted systems and services. 【Service Contents】 ■ Hearing ■ Goal Setting ■ Feasibility Study ■ Development of Cloud Migration Guidelines *For more details, please download the PDF or contact us.

  • Other services
  • Other network tools
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microarray analysis service

Microarray analysis service

Analysis service that delivers accurate data certified by Illumina.

We offer microarray analysis services using Illumina and Agilent chips. As an officially designated service provider by Illumina, we can provide accurate data certified by Illumina. Additionally, we also accept general analysis consultations based on bioinformatics. 【Types of Services】 ■ Illumina Microarray ■ Agilent Microarray ■ Affymetrix Microarray ■ Validation 　・ RealTime PCR (Expression) 　・ TaqMan SNP assay *For more details, please feel free to contact us.

  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What is FMEA (Failure Mode and Effects Analysis)?

What is FMEA (Failure Mode and Effects Analysis)?

A clear explanation of the specific benefits, classifications, and steps for implementing FMEA in seven easy-to-understand steps!

One of the measures to prevent potential risks in product development and manufacturing processes is "FMEA (Failure Mode and Effects Analysis)." By utilizing FMEA, it becomes possible to predict and evaluate potential failure modes and their effects during the design and process planning stages, allowing for proactive measures. This contributes not only to quality improvement and cost reduction but also to the avoidance of significant troubles. This article will clearly explain the basic concepts and objectives of FMEA, as well as why it is considered important in quality management. Additionally, it will discuss the main types of FMEA, such as Design FMEA and Process FMEA, their characteristics, and the specific benefits gained from implementing FMEA. *For more detailed content of the article, please refer to the link below.*

  • Internal Control and Operational Management
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coupled analysis with 3D simulation (VPS)

Coupled analysis with 3D simulation (VPS)

Introduction to the current situation regarding updates on coupled analysis with VPS.

I would like to introduce the current situation regarding updates on coupled analysis with VPS (Virtual Performance Solution). In the GUI, we create models for coupled analysis using ESI Group's integrated GUI environment, VE (Visual Environment), specifically Visual-Systems. With the release of VE 13.5, the number of available components has increased. Specifically, in the previous version, the outputs from the VPS model were limited to position, displacement, angle, and angular velocity. However, in the current version, it now supports displacement and load, and the outputs to the VPS model have expanded to include not only load and pressure sensors but also displacement, velocity, and moment. This significantly broadens the range of cases for conducting coupled analysis. *For more details, please feel free to contact us.*

  • Other analyses
  • simulator
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Practical Modal Analysis for Automobiles

Practical Modal Analysis for Automobiles

We are publishing information about OMA (Operational Modal Analysis) and EMA (Experimental Modal Analysis)!

This document reports on cases of OMA (Operational Modal Analysis) using multi-point simultaneous measurements on SUV test vehicles, followed by cases of OMA and EMA (Experimental Modal Analysis) using multi-point non-simultaneous measurements on convertible car test vehicles. As a practical modal analysis for automobiles using a relatively small-scale system, OMA proposes a method to determine natural frequencies and damping ratios using SSI (Stochastic Subspace Identification), and to obtain mode shapes using ODS (Operational Deflection Shape). Additionally, EMA proposes a combination of sinusoidal excitation using a small electromagnetic shaker and the least squares complex frequency method. 【Contents】 ■ Preface ■ OMA (Operational Modal Analysis) ■ EMA (Experimental Modal Analysis) ■ Discussion ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

  • Other analyses
  • others
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of genetic polymorphisms related to drug metabolism

Analysis of genetic polymorphisms related to drug metabolism

The mass array method allows for the simultaneous analysis of multiple genetic polymorphisms.

There are individual differences in drug metabolism activity, and these differences are believed to be due to genetic polymorphisms. In the field of pharmacogenomics (PGx), there is an expectation for the application of personalized medicine that takes into account the effects of drugs, side effects, and drug interactions by investigating genetic polymorphisms. This document introduces the analysis of genetic polymorphisms related to drug metabolism using a designed analysis tool based on mass array methods. Genetic polymorphisms will be determined from the analysis results of SNPs (Single Nucleotide Polymorphisms) and CNVs (Copy Number Variations) for 20 drug metabolism-related genes.

  • img_B0305_1.jpg
  • img_B0305_2.jpg
  • Contract measurement
  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Series] Thermal Fluid, Strength Analysis

[Analysis Series] Thermal Fluid, Strength Analysis

Analysis with multiple conditions is possible! Achieve speed and low cost with new dedicated analysis software!

"Thermal Fluid and Strength Analysis" conducts thermal fluid and strength analysis swiftly from the creation of 3D models to the preparation of analysis result reports. Based on the analysis results, we can propose shape optimization. We are capable of creating 3D models for analysis and can produce suitable models by listening to the analysis requirements. 【Features】 ■ Analysis under multiple conditions is possible ■ Steady-state and unsteady-state analysis are possible ■ Based on the analysis results, we can propose shape optimization ■ Achieves speed and low cost with new analysis-specific software ■ Capable of creating 3D models for analysis, producing suitable models by understanding the analysis content *For more details, please refer to the PDF materials or feel free to contact us.

  • Thermo-fluid analysis
  • Other analyses
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Door opening and closing durability analysis

Door opening and closing durability analysis

We will consider the surface contact near the spot welding area to make it possible to reproduce the actual phenomenon!

It is possible to reproduce phenomena that are difficult to replicate with general modeling. When in contact, forces are generated, and when separated, no forces are generated, allowing for the reproduction of actual phenomena through contact consideration. This is suitable for durability analysis of door opening and closing in passenger cars and commercial vehicles. For details, please refer to the downloadable materials and contact us. 【Features】 ■ Consideration of surface contact near spot welds and bolted joints ■ Actual phenomena can be reproduced through contact consideration ■ Forces are generated when in contact, and no forces are generated when separated *For more information, please refer to the PDF materials or feel free to contact us.

  • image_30.png
  • Mechanism Analysis
  • Stress Analysis
  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Analysis Case] Analysis of Stray Losses in Power Transformers

[Analysis Case] Analysis of Stray Losses in Power Transformers

Analyze stray load losses under the condition of the presence or absence of leakage flux blocking components in the transcoil!

We would like to introduce the "Analysis of Power Transformer Stray Losses" conducted by our company. The analysis mode is frequency response analysis (Time Harmonic), and the rated capacity of the power transformer is 100 MVA. The input frequency is 50 Hz/AC. As a result of the analysis, it was found that the leakage magnetic flux generated from the transformer coil is significantly and extensively collected at the shunt wall. 【Analysis Conditions】 ■ Analysis Mode: Frequency Response Analysis (Time Harmonic) ■ Power Transformer Rating: 100 MVA ■ Input Frequency: 50 Hz/AC ■ Shunt Wall (Flux Collector): Magnetic Material ■ Frame Material, Tank Material: Carbon Steel *Details of the case can be viewed through the related links. For more information, please feel free to contact us.

  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power product electrical analysis services

Power product electrical analysis services

Design and development support considering the transmission line characteristics of power products.

Our company provides design support based on a wide range of experience in semiconductor application products, from LSI to power electronics. In the field of power electronics, represented by inverters, which has gained attention in recent years, solving challenges during switching is a key point. We can offer comprehensive design support, from transmission line analysis using electromagnetic field analysis simulators to product evaluation, and further to analysis and verification of circuit simulations.

  • Calibration and repair
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Behavior Analysis of Diaphragm Springs through Nonlinear Static Analysis

[Case Study] Behavior Analysis of Diaphragm Springs through Nonlinear Static Analysis

Non-linear static analysis of diaphragm spring behavior conducted! Reproduction of the jumping phenomenon.

We would like to introduce our analysis titled "Behavior Analysis of Diaphragm Springs Using Nonlinear Static Analysis." When a load is applied to a disc spring, the shape of the spring is complex, leading to not only bending but also twisting and buckling. Additionally, the support conditions are not constant, making it impossible to determine the load and stress using simple cantilever beam theory. In this analysis example, we were able to reproduce the jumping phenomenon of a diaphragm spring used in automotive clutches by conducting nonlinear static analysis on its behavior. 【Case Overview】 ■ Analysis Content: Nonlinear Static Analysis ■ Analysis Result: Reproduction of bidirectional jumping deformation of the diaphragm spring *For more detailed information about this case, please refer to the related links. For further inquiries, feel free to contact us.

  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study Analysis: "Scuttle Shake Analysis of Open Cars by OMA"

Case Study Analysis: "Scuttle Shake Analysis of Open Cars by OMA"

Scuttle shake analysis of open cars using OMA (Operational Modal Analysis).

We would like to introduce a case study by F-MA Consulting, a specialist in vibration noise analysis technology, titled "Scuttle Shake Analysis of Open Cars Using OMA (Operational Modal Analysis)." The definition of scuttle shake is: "a phenomenon commonly seen in open cars with low body rigidity," "which manifests as a 'shaking sensation' when driving in urban areas at speeds of 40 to 60 km/h," and "is generally said to be caused by low-frequency (10 to 20 Hz) twisting modes of the body." 【Experimental Analysis Using ModalVIEW】 - Collection of acceleration and deceleration data from actual vehicle runs at each measurement point - Pole extraction using SSI from time history data - Calculation of mode shapes at each point from the extracted modes - Display of vibration modes in the operational state For more details, please contact us or download the catalog.

  • Other analyses
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PCB and FPC substrate analysis service <Parts list>

PCB and FPC substrate analysis service <Parts list>

You can check the mounting positions on the layout! We also accept requests for parts lists solely for cost investigation purposes.

Our PCB and FPC board analysis service investigates components removed from the boards and identifies their types and element constants. The part numbers are common with the "schematics" and "component placement," allowing for verification of the specifications, usage in the circuit, and placement on the layout. Thanks to our unique database, we can identify the functions of most ICs, but there may be cases where we cannot identify special ICs like ASICs. In such cases, we can extract the IC chip for verification of the manufacturer and function estimation through chip marking, so please consult us separately. 【Features】 ■ Investigate components removed from the board and identify their types and element constants ■ Verify specifications, usage in the circuit, and placement on the layout ■ Requests for parts lists solely for cost investigation purposes are also possible *For more details, please refer to the PDF materials or feel free to contact us.

  • Printed Circuit Board
  • Contract Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Campaign Launch】Single Cell Analysis Service Now Available

【Campaign Launch】Single Cell Analysis Service Now Available

Single-cell analysis enables the analysis of individual cells until June 30, 2020 (Tuesday)!

KOTAI Biotechnologies Co., Ltd. is holding an opening campaign to commemorate the start of its contract services until June 30, 2020. Using the Chromium Single Cell Kit from 10x Genomics, we will perform library preparation, sequencing, and Cell Ranger analysis. Please take advantage of this campaign period. 【Campaign Details】 ■ Period: Until June 30, 2020 (Tuesday) for quoted estimates ■ Eligible Services - Single Cell Repertoire (BCR/TCR)-Seq - Single Cell RNA-Seq ■ Cell Acceptance Conditions - Frozen state - At least 1 million cells - Survival rate of 80% or higher - (For human biological samples and clinical specimens) Information must be anonymized *For more details, please refer to the PDF document or feel free to contact us.

  • Cell-related contract
  • Analysis and sequencing services
  • Other contract services
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Guide to Statistical Analysis

[Information] Guide to Statistical Analysis

Appropriate research planning, actual surveys, aggregation, and analysis tailored to the theme! We will clearly resolve your research issues.

This document serves as a guide for statistical analysis. It includes Quantification Type I, II, III, cluster analysis, PSM analysis, correspondence analysis, and paired comparison evaluation methods. At Plus One Research, we provide suitable research planning, actual surveys, aggregation, and analysis to clearly resolve research issues according to the theme. [Contents] ■ Quantification Type I: Creating predictive model formulas from qualitative data ■ Quantification Type II: Analyzing factors that differentiate groups ■ Quantification Type III: Scoring the similarity of people and objects ■ Cluster Analysis: Grouping samples and variables ■ Correspondence Analysis: Creating positioning maps from cross-tabulation tables *For more details, please refer to the PDF document or feel free to contact us.

  • Analysis Services
  • Contract Analysis
  • Other analyses
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gut microbiome analysis service

Gut microbiome analysis service

It is possible to comprehensively evaluate the types and distribution of bacteria contained in the sample.

We offer intestinal microbiome analysis services. This is a contracted service using 16S rRNA gene analysis, conducted with next-generation sequencers, allowing you to understand what microorganisms are present in your fecal samples. Additionally, by utilizing our uniquely established anaerobic bacterial culture techniques, we can quantitatively analyze the number of bacteria per weight of feces individually. Please feel free to consult us if you have any requests. 【Analysis Overview】 ■ Analysis Area: v3-v4 region ■ Software: QIIME ■ Database: SILVA ■ Number of Reads: Over 10,000 reads ■ Analysis Model: MiSeq *For more details, please download the PDF or feel free to contact us.

  • Analysis and sequencing services
  • Other analysis and sequence
  • Other Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Numerical analysis solution

Numerical analysis solution

Supporting your product development and problem-solving with fluid analysis and structural analysis using 3D CAE!

Our company supports model-based development, which is increasingly in demand in the automotive industry, by providing necessary CAE for requirement analysis, control design (control target models), and verification tools (MILS, HILS). Leveraging this know-how, we conduct analysis work that concretizes the physical phenomena required for products in the upstream stages of product development using 1D CAE. In model-based development, we advance the development while verifying based on the "model" created on the computer. We assist in addressing challenges (efficiency, quality assurance) in the development process by developing tools tailored to our customers' needs. 【Features】 - Development of tools for 1D simulation used in the requirement analysis stage of products and conducting analysis work using 1D simulation. - Conducting model-based development, including the creation of control target models (plant models) using MATLAB/Simulink. - Development and verification of necessary verification tools (MILS, HILS) in the downstream part of model-based development. *For more details, please refer to the PDF materials or feel free to contact us.

  • Contract Analysis
  • Other analyses
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RTL Code Visual Analysis "HDL Auto SpecDraw"

RTL Code Visual Analysis "HDL Auto SpecDraw"

*Only the HDL language source code remains! At such times, I will strongly support your analysis!

"HDL Auto SpecDraw" analyzes source code written in Verilog-HDL/VHDL languages. [Are you facing these issues?] "Only the source code remains, with no comments." "There is no design specification document, and it's disorganized." "Additional modifications are not reflected in the documentation." "The behavior changed in places different from where the changes were made." "The designer is no longer available, and no one understands." ★Even for analysis, we can no longer allocate the time of skilled engineers! [Features] ■Draw multiple source files within the same project in a schematic style 　⇒Visually capture the entire project ■Highlight any signal lines 　⇒Trace the connections of modules ■Output various reports 　⇒Support analysis *For more details, please refer to the PDF materials or feel free to contact us.

  • Other analyses
  • ASIC
  • Other semiconductors
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis of "CytoScan HD Array"

Analysis of "CytoScan HD Array"

Analyzing chromosomal displacement from micro-regions to the whole genome level!

The "CytoScan HD Array Analysis" allows for the rapid analysis of chromosomal variations from micro-regions to the whole genome level. It enables the detection of chromosomal copy number abnormalities across the entire human genome and allows for comparison with reference data, including samples from the International HapMap Project. This product is ideal for those who wish to conduct research on hereditary diseases, perform screening for chromosomal copy number abnormalities, or analyze the correlation between gene discovery and copy number. 【Features】 ■ Rapid analysis of chromosomal variations from micro-regions to the whole genome level ■ Detection of chromosomal copy number abnormalities ■ Comparison with reference data *For more details, please refer to the catalog or feel free to contact us.

  • Other analysis and sequence
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Moving Boundary: Analysis of Wind Pressure Acting on a Running Train

Moving Boundary: Analysis of Wind Pressure Acting on a Running Train

We analyzed the aerodynamic pressure acting on a moving train.

Moving Boundary: The analysis of wind pressure acting on a moving train was conducted using numerical simulations that take into account the moving boundary. There are concerns that strong winds, such as those caused by typhoons, can overturn moving trains. Therefore, understanding the wind pressure acting on a moving train is crucial. For more details, please download the catalog.

  • simulator
  • Contract Analysis
  • Structural Analysis
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Energy-saving compared to the old model! High output! Corrugated pipe extrusion machine series.

Energy-saving compared to the old model! High output! Corrugated pipe extrusion machine series.

The "NG" series equipped with new technology! A variety of products such as solEX NG and uniEX are available in the lineup!

We would like to introduce the "Extruder for Corrugated Pipes" that we handle. We offer a diverse lineup of products including solEX NG 75-40, uniEX 45-30, and New design. The model "solEX NG" brings various benefits in the manufacturing of corrugated pipes, such as optimized shear, perfect melt uniformity, and significantly reduced axial pressure profile. 【Benefits of solEX NG (excerpt)】 ■ Lower melt temperature: approximately 10°C lower compared to the old model "solEX" ■ Reduced energy consumption: about 15% less compared to "solEX" ■ Increased output: approximately 20% more compared to "solEX" ■ Low pressure profile = less wear = longer lifespan ■ The new grooved barrel concept extends the transport of "grooved bush" to the end of the melt zone. *For more details, please download the PDF or feel free to contact us.

  • コルゲートパイプ用押出機2.JPG
  • コルゲートパイプ用押出機3.JPG
  • Extrusion Machine
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analysis Series: Pinpoint Analysis

Analysis Series: Pinpoint Analysis

Making analysis more accessible! A light-type analysis service that you can request from one location.

【New Service】 Pinpoint analysis is a service that meets the needs of engineers who want to "check the analysis values for this specific part." Please make use of it in situations where you want to know the results quickly and cheaply. If you provide a 3D model for analysis, we can achieve even faster and cheaper results. 【Standard Analysis】 The "Analysis Series" by Eyes conducts thermal fluid and strength analysis quickly, from the creation of 3D models to the preparation of analysis result reports. We can propose shape optimization based on the analysis results. We are capable of creating 3D models for analysis and can produce suitable models by hearing the details of the analysis content. 【Features】 ■ Analysis under multiple conditions is possible ■ Steady-state and unsteady-state analysis are possible ■ We can propose shape optimization based on the analysis results ■ Achieves speed and low cost with new analysis-specific software ■ Capable of creating 3D models for analysis, producing suitable models by hearing the analysis content *For more details, please refer to the PDF materials or feel free to contact us.

  • Analysis Services
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Entrusted Analysis Service "Resin Flow Analysis"

Entrusted Analysis Service "Resin Flow Analysis"

Leveraging 35 years of experience, our "masters" in numerical analysis provide simulation techniques that are beneficial to each individual!

We offer contracted analysis for plastic injection molding simulation using resin flow analysis. If you want to shorten the design and development period, are in urgent need of countermeasures due to mass production defects, or wish to conduct resin flow analysis but find it difficult to implement the software, we can respond to various requests, so please feel free to contact us. 【Recommended for the following individuals】 ■ Those who want to shorten the design and development period ■ Those who are facing mass production defects and need urgent countermeasures ■ Those who want to conduct resin flow analysis but find it difficult to implement the software ■ Those who wish to introduce resin flow analysis in the future but want to conduct analysis before implementation ■ Those who lack manpower for analysis work and would like someone to conduct the analysis for them *For more details, please refer to the PDF document or feel free to contact us.

  • Contract Analysis
  • Contract Analysis
  • Analysis Services
  • Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Analysis

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.