Coating Product List and Ranking from 567 Manufacturers, Suppliers and Companies

Problem-solving during adhesive tape manufacturing! Super Coating Series

We introduce a coating that exhibits excellent non-adhesive properties to prevent sticking of sticky materials such as labels and adhesive tapes.

Adhesive tape often sticks to machines and other materials during the manufacturing process due to its nature. To prevent such issues, it is essential to employ coating technologies that exhibit non-adhesive properties, especially against sticky adhesives. By using appropriate coating technologies, the ease of handling materials on the production line can be significantly improved, contributing to the preservation of product quality. Introduction to Coating Technologies ■ Super TP and TP Series Composed entirely of fluororesin, these can be used in silicone-free environments. The use of fluororesin eliminates concerns about the transfer or contamination of silicone oil, and it is expected to improve non-adhesiveness by reducing contact area. ■ Super CTT Series This silicone-based series features excellent non-adhesiveness and slip resistance. Since it uses silicone, consideration must be given to the transfer to the counterpart material. ■ Super Alloy Coating Consisting of both fluorine and silicone types, it achieves a balance of flexibility and high hardness. Surface treatment of HV600 can also be applied to resins and sponge rubber, achieving high durability. *For more details, please download the PDF or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating for plating jigs for electronic substrates.

New standard for plating jigs that achieve high durability and high insulation properties.

The fluororesin coating for plating jigs provided by Yoshida SKT Co., Ltd. addresses the challenges of quality stabilization and cost reduction in the electronic circuit board manufacturing industry. To overcome the deterioration and reduced insulation properties that were difficult to manage with conventional PVC-coated jigs, we adopted a special fluororesin coating. This coating offers superior processability compared to standard PFA coatings and allows for thick film processing. This results in the following advantages: - Increased lifespan: Achieves overwhelming durability compared to PVC coatings, reducing the frequency of jig replacements. - Reduced carryover of plating solution: Excellent water repellency prevents the carryover of plating solution to the next process over an extended period. - Stable insulation properties: Minimal deterioration from plating solution allows for long-term maintenance of insulation performance. - Total cost reduction: Although initial investment is higher, the increased lifespan of jigs and reduced maintenance frequency lead to long-term cost savings. As electronic devices become smaller and more high-performance, Yoshida SKT's innovative coating technology aims to enhance the performance and efficiency of plating jigs. *For more details, please refer to the PDF document or feel free to contact us.*

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS-free high-temperature resistant lubricating coating 'FFLC-101'

Maintains hardness even at 200℃! Achieves lubrication and durability in high-temperature ranges without PFAS.

"FFLC-101" is a PFAS-free high-temperature lubricant coating that demonstrates excellent performance, particularly in high-temperature environments ranging from 100°C to 200°C. Even at 200°C, the coating hardness does not decrease, maintaining high lubricity and wear resistance. Despite being a graphite-based material, its design suppresses transfer, making it suitable for various industrial applications. It is ideal for machine parts that require stable lubrication effects under high temperatures. *For more details, please click on "PDF Download" or feel free to contact us.*

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS-free premium film lubrication coating 'FFLC-211'

Proven even in the Taper Test! Provides the highest durability in the series with PFAS-free and temperature range up to 250°C.

"FFLC-211" is a PFAS-free lubricating coating equipped with a high-quality lubricating film, providing exceptional durability in temperature ranges from room temperature to 250°C. It has demonstrated excellent results in friction wear durability tests and Taber wear tests, making it suitable for use in harsh environments. It is particularly ideal for machine parts and industrial equipment that require high durability and lubrication performance. 【Features】 ■ PFAS-free non-fluorinated coating ■ Excellent durability performance due to high-quality lubricating film ■ Specialized in friction wear durability in temperature ranges from room temperature to 250°C *For more details, please click on "PDF Download" or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Prevention of resin adhesion in the welding heater block of the packaging bag manufacturing process.

Zero resin adhesion even in high-temperature environments! Achieved 4 months of durability with our uniquely developed surface treatment.

■Issue We want to prevent the adhesion of resin films in a high-temperature environment of up to 180°C. A surface treatment that can accommodate both polypropylene bags and aluminum vapor-deposited bags is necessary. The current treatment has a short lifespan and requires frequent replacements. ■Background The heater block is an important component in the sealing process of packaging bags. When heat is applied to bond the resin film, there is a problem where the resin from the film easily adheres to the surface of the block. The customer tried surface treatments from other companies but did not achieve sufficient results, making the realization of stable non-stick properties and long lifespan urgent. ■Adopted Treatment We developed our unique "TP Coating" and applied it to the surface of the heater block. ■Features - Excellent release properties that prevent resin adhesion - Stable performance even in high-temperature environments - Selection process for the treatment ■Effects - Achieved a lifespan of about 4 months with an operating frequency of 10 times per minute - Reduced cleaning frequency and operational losses by maintaining non-stick properties - Improved operational efficiency of the production line with stable performance under high temperatures For more details, please refer to the catalog or contact us directly.

Company：吉田ＳＫＴ
Price：Other

Secondary Cells/Batteries
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Doubling the durability of mold surface treatment in automotive motor parts manufacturing.

Durability improved by about 2 times! Dramatically enhanced productivity of injection molding molds.

■Issue In injection molding components, the durability of the mold surface treatment is poor, requiring frequent replacements and hindering productivity. ■Solution Gradually adjust a surface treatment that is resistant to wear from molten resin and has lasting effectiveness, adopting the optimal coating. ■Customer's Challenge A manufacturer of automotive parts faced the following issues in the injection molding process of motor components: ■Details of the Issue Even with surface treatment, epoxy resin adhered, necessitating replacement after about 2,000 shots. Frequent mold changes led to decreased productivity and increased costs. ■Conditions for Surface Treatment Selection Contact with molten epoxy resin under high temperature (150°C) and high pressure. Improving wear resistance is the top priority. ■Solution Method To improve the durability of the surface treatment, tests were conducted with multiple coating specifications to consider the optimal treatment. The following surface treatments were tested: - Bi-Coat NYK-11-S Durability comparable to conventional products - Bi-Coat TYS-03K Lifespan of a few hundred shots - Bi-Coat NYK-01 (Adopted) Durability improved to twice that of conventional products Recommended for those facing issues with resin adhesion prevention and wear-resistant coatings. Please feel free to contact us!

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comparison of heat resistance of fluororesins

Fluororesin is used in various industries due to its excellent heat resistance, chemical resistance, and non-stick properties.

This comparison table summarizes the characteristics of representative fluoropolymers and their maximum operating temperatures (heat resistance). 【Comparison of Types of Fluoropolymers and Heat Resistance】　Name　　 Maximum Operating Temperature (Heat Resistance) 　PTFE　　 260℃ 　FEP　　　 200℃ 　PFA　　　 260℃ 　ETFE　　 150℃ 　ECTFE　　 150℃ 　PCTFE　　 120℃ 　PVdF　　 150℃ 【Selection of Fluoropolymers】　Highest heat resistance (260℃): PTFE, PFA 　Slightly lower heat resistance (below 200℃): FEP, ETFE, ECTFE, PCTFE, PVdF 　Balance of chemical resistance and non-stick properties is important: selection according to application is necessary ▶ For details on each fluoropolymer, please download and check the "Fluoropolymer/Super Engineering Plastic Properties Summary Table."

Company：吉田ＳＫＴ
Price：Other

Resin mold
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For the release and non-stick properties of solution polymerized styrene-butadiene rubber (S-SBR)!

Introducing coating technology that achieves non-stick and release properties on contact surfaces.

With the expansion of electric vehicle (EV) adoption, the tire industry is rapidly developing EV-specific tires that have different performance characteristics compared to traditional gasoline vehicles. Among these, SSBR is gaining attention as a material that significantly improves tire performance due to its unique molecular structure compared to conventional styrene-butadiene rubber (E-SBR). On the other hand, SSBR is inherently a highly adhesive substance, increasing the need for non-adhesive coatings in the manufacturing process. [Need for Non-Adhesive Coatings in the Manufacturing Process] ■ Adhesion prevention is necessary during the storage and transportation of uncured rubber. ■ Adhesion prevention is necessary when handling extruded products and pre-formed products. ■ Adhesion prevention is necessary in the tire manufacturing process. If you are experiencing troubles or decreased productivity due to adhesion issues in the manufacturing process, please consider non-adhesive coatings. Yoshida SKT offers a variety of coating options. We will propose non-adhesive coatings that match each process. *For more details, please refer to the PDF materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment processing service - Surface treatment of stainless steel

We will introduce surface treatment and coating processes that can add characteristics to stainless steel surfaces.

■What about the surface of stainless steel? Among stainless steels, the surface of austenitic stainless steel (SUS304) is covered with a passive film, making it resistant to rust in normal environments and maintaining a beautiful luster. However, in specific environments, it may corrode, and when used as machine parts, properties such as slip resistance and wear resistance become necessary. 【Types of Surface Treatment and Coating for SUS304】 - Electropolishing - Sandblasting / Bead blasting - Plating - Teflon coating There are methods like the above to modify the surface of stainless steel. Generally, these methods provide sufficient functionality, but if you want to further enhance durability, slip resistance, and non-stick properties, we would like to introduce a coating that can meet such demands. 'Bicoat,' with its hard coating of HV700-900 and the lubricating properties of fluororesin, combines wear resistance, slip resistance, and non-stick properties, making it recommended for those who are not satisfied with conventional surface treatments and coatings. If you are interested in more detailed product information about 'Bicoat(R),' please download the PDF materials to learn more.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contract Coating Services

Professional contract coating services! Yoshida SKT helps create new value with coating technology.

Yoshida SKT is a company that has been leading innovations in fluoropolymer processing technology for over half a century. Starting with the licensing agreement with DuPont in the United States in 1968, we have focused on the introduction and development of fluoropolymer coating technologies, including Teflon(TM). Our technological capabilities extend beyond Teflon fluoropolymer coatings and have led to the development of a variety of coating technologies. 【Key Surface Treatment Technologies】 Teflon Fluoropolymer Coating Features non-stick properties, chemical resistance, heat resistance, and cold resistance, making it suitable for a wide range of applications. MY Lining(R) A permeation-resistant PFA lining, ideal for handling chemical substances. SafeLON(R) A fluoropolymer coating with anti-static properties, enhancing safety. Non-Stick Coating Series A series of coatings specifically designed to address adhesive substances. BICOAT(R) An organic-inorganic composite coating system boasting ultra-durability. NanoProcess(R) A precision thin-film coating process that meets cutting-edge technological demands. From extensive material selection to the provision of test pieces, Yoshida SKT offers meticulous support tailored to the specific needs of each customer.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Achieve slip resistance with wear-resistant coating! Coating solution case studies available.

An alternative to fluororesin coatings! A case study of a coating that achieves both wear resistance and slip properties that were previously given up on.

The resin caps immediately after molding are sticky and are coated with fluororesin to provide slip properties. However, fluororesin is prone to wear, and when it wears down, it can lead to foreign matter contamination. The document describes a solution to enhance "slip properties" without wear. For details, we will introduce a case study of mirin caps for a major beverage manufacturer! *For more information, please contact us or refer to the catalog.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS regulation compliance fluoropolymer alternative engineering plastic coating

Proactive response to environmental regulations! High-performance non-fluorinated coatings as alternatives to fluoropolymer.

Introducing the "Non-Fluorinated Engineering Plastic Coating" provided by Yoshida SKT. In preparation for the recent strengthening of PFAS regulations, we have started new contract processing using engineering plastics (EPL) as an alternative coating technology that does not use fluororesins. We offer five types of engineering plastic materials, including PEEK, PPS, PI, PAI, and PES, and will propose the most suitable coating for your application. 【Features】 ■ Proactive response to PFAS regulations ■ Excellent properties such as high strength, heat resistance, and chemical resistance ■ Five types of engineering plastic materials: PEEK, PPS, PI, PAI, PES ■ A lineup of our uniquely developed PFAS-free coatings (FFLC series, CAS) ■ Free coating technology consultation by technical sales representatives 【Applications】 Surface treatment for manufacturing equipment and parts such as aircraft components, automotive parts, medical devices, semiconductor manufacturing equipment, electronic substrates, and electrical connectors. *We will listen to your challenges and propose the optimal coating. For more details, please download the materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Performance that surpasses fluororesin. The potential of PFAS-free coatings.

Not a substitute, but an evolution. Choose based on performance, the next-generation coating, the FFLC series has arrived!

The "Non-Fluorinated High Lubrication Coating FFLC Series" is a high-performance coating developed with the aim of achieving a sustainable society, featuring excellent lubrication properties. It combines lubrication comparable to fluoropolymer coatings with superior high-temperature durability. ■ PFAS-Free: This product does not use PFAS (perfluoroalkyl and polyfluoroalkyl substances). ■ Lubrication Performance: It provides lubrication performance equal to or greater than that of fluoropolymer coatings, ensuring smooth operation of equipment and reducing energy loss. ■ Durability: It exhibits excellent friction and wear durability even in high-temperature environments, making it suitable for use under conditions that are difficult to address with conventional fluoropolymer coatings. *For more details, please click on "PDF Download" or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Solve adhesion troubles in the molding and cutting process! PFAS-free coating.

Non-stick and easy to peel off. Reliable release properties even without fluoropolymer.

Release coatings that prevent undesirable adhesion of materials, reducing line stoppages, equipment maintenance frequency, and material loss. Excellent release properties can be achieved even without PFAS. Silicone-based "MRS Coating" that is strong against highly adhesive materials like duct tape. "CAS" that enables smooth release through convex surface formation. "Bi-Coat" that accommodates micron precision molds, among others, we propose alternative coatings based on usage conditions, the adhesive properties of the counterpart materials, and applications. 【PFAS-Free Coating Lineup】 ■ Non-stick coating "MRS Coating" Model number: MRS-102, etc. ■ Convex surface formation coating "CAS" Model number: CAS-CX102, etc. ■ High hardness coating "Bi-Coat" Model number: NYK-52, etc. ■ Lubricating coating "FFLC Series" All model numbers ■ Corrosion-resistant coating "Cerashield" Model number: CST-1508, etc. ■ High hardness coating "PEEK Coating" Model number: YEK-0001, etc. *For coatings considering PFAS regulation proposals, please contact us.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Protecting chemical plants! PFAS-free coatings that withstand harsh environments.

To both acids and alkalis. A powerful protective film that shuts out chemical solutions.

Corrosion resistance is essential for equipment used in corrosive environments, such as chemical plants, storage tanks, piping, and pumps. Fluororesins have properties that make them resistant to degradation by most acids, alkalis, and organic solvents, and there are applications where PFAS-free alternatives are possible. The "Cerashield," with its high cross-link density coating, protects the substrate by shutting out water and chemicals even in harsh environments. 【PFAS-Free Coating Lineup】 ■ Non-stick Coating "MRS Coating" Model Number: MRS-102, etc. ■ Convex Forming Coating "CAS" Model Number: CAS-CX102, etc. ■ High Hardness Coating "Bicoat" Model Number: NYK-52, etc. ■ Lubricating Coating "FFLC Series" All model numbers ■ Corrosion Resistant Coating "Cerashield" Model Number: CST-1508, etc. ■ High Hardness Coating "PEEK Coating" Model Number: YEK-0001, etc. *For coatings considering PFAS regulations, please contact us.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Achieving speed-up of the transport line. PFAS-free lubrication coating.

Smooth, fast, and energy-efficient. Surface treatment that maximizes transport efficiency.

Conveyors, chutes, guide rails, and other components require excellent lubrication for efficient transport processes. Fluoropolymer coatings provide low friction coefficients for smooth transport, but under heated conditions, PFAS-free alternatives with even better performance have emerged. The "FFLC series" achieves performance that surpasses fluoropolymers in terms of friction and wear durability under heated conditions. 【PFAS-Free Coating Lineup】 ■ Non-stick Coating "MRS Coating" Model Number: MRS-102, etc. ■ Convex Surface Forming Coating "CAS" Model Number: CAS-CX102, etc. ■ High Hardness Coating "Bi-Coat" Model Number: NYK-52, etc. ■ Lubricating Coating "FFLC Series" All model numbers ■ Corrosion-Resistant Coating "Cerashield" Model Number: CST-1508, etc. ■ High Hardness Coating "PEEK Coating" Model Number: YEK-0001, etc. *For coatings considering PFAS regulations, please contact us.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PAI coating, PFAS regulation compliance, fluoropolymer alternative coating

Proactive response to environmental regulations! High-performance non-fluorinated coatings as alternatives to fluoropolymer.

PAI (Polyamide Imide) is one of the super engineering plastics and is utilized for the following performance characteristics and applications. ■ Main Performance - Low creep - Heat resistance - Chemical resistance, etc. ■ Main Applications - Aircraft components - Automotive parts - Electrical and electronic components - Bearings, etc. At Yoshida SKT, we offer PAI coatings as engineering plastic coatings. *For more details, please download the materials or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Food Sanitation Law Compliance and PL (Positive List) Compliant Coating Series

Balancing hygiene and efficiency in manufacturing equipment. Coating compliant with the Food Sanitation Act positive list - Download materials.

We introduce coatings that comply with food sanitation laws to enhance safety and production efficiency in food manufacturing and processing equipment. Our lineup includes coatings that meet the food sanitation law (positive list system) and can be used in applications that come into direct contact with food, covering essential functions required in manufacturing environments such as slip resistance, non-stick properties, release properties, heat resistance, anti-static properties, and high durability. 【Applications】 Our coatings are suitable for a wide range of food manufacturing environments, including bread and bakery, confectionery, meat processing, dairy products, frozen foods, noodles, seafood processing, rice and bento, side dishes and school meals, beverage manufacturing, and packaging machine components. 【Features】 ■ Coatings with slip resistance, non-stick properties, and release properties reduce line stoppages and cleaning frequency due to adhesion. ■ Multifunctional specifications including anti-static properties, heat resistance (maximum operating temperature class of 260°C), chemical resistance, and corrosion resistance. ■ We also offer the FFLC series, which is free from PFAS, demonstrating our commitment to environmental considerations. If you are considering improving the efficiency of your manufacturing line, please download our materials and contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating compliant with the Food Sanitation Act for food manufacturing

Coating that balances hygiene management and efficiency in food manufacturing equipment.

In the food manufacturing industry, maintaining hygiene management of manufacturing equipment is crucial to ensure food safety. The occurrence of contaminants and the effort required for cleaning not only hinder hygiene management but also lead to decreased production efficiency. Coatings that comply with food sanitation laws address these challenges and support safe food production. Our series of coatings compliant with food sanitation laws contribute to hygiene management and efficiency in manufacturing sites through functions such as slip resistance, non-stick properties, and release characteristics. **Application Scenarios** * Bread and bakery, confectionery * Meat processing, dairy products, frozen foods * Noodles, seafood processing, rice and bento, prepared foods and school lunches * Beverage manufacturing, packaging machine components **Benefits of Implementation** * Reduction in line stoppages and cleaning frequency due to adhesion * Decreased risk of foreign matter contamination * Increased productivity * Stabilization of product quality For more details, please download the materials or contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot melt adhesive release coating

Solving the adhesion of hot melt adhesive. Preventing entanglement with the conveyor roll.

In manufacturing lines that use hot melt adhesive, there can be issues where products coated with adhesive get caught in the transport rollers. Additionally, adhesive residue can lead to increased cleaning labor and a decline in product quality. Yoshida SKT's MRS coating makes it difficult for even soft hot melt adhesives to stick, and its effectiveness lasts even after cleaning with solvents. 【Usage Scenarios】 - Transport rollers after hot melt application - Guide components of adhesive coating machines - Labeling machines - Sealing machines 【Benefits of Implementation】 - Prevention of adhesive adhesion and entrapment - Effectiveness persists even after solvent cleaning - Prevention of adhesive residue - Reduction in cleaning labor *Features may vary depending on the type of product. For more details, please download the PDF or contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat plate release coating for resin bonding and heat sealing.

Solving the "sticking" of film welding heat plates. Release effect improved to three times compared to conventional methods.

In resin bonding and heat sealing processes, the adhesion of films and resins to the heating plates is a factor that reduces production efficiency. There are cases where conventional fluoropolymer coatings also cause sticking, leading to issues such as stringing and poor release. Yoshida SKT's CHC (Ceramic Hard Coat) and convex coatings have successfully improved durability in high-temperature environments and enhanced the release effect to three times that of conventional methods. 【Usage Scenarios】 - Heat plates for tray sealers - Bonding and fusing parts of resin films - Heat fusion molds for filter cases - Bonding processes for containers and lids 【Benefits of Implementation】 - Prevention of film and resin sticking - Reduction of stringing - Increased lifespan of heating plates (three times that of conventional) - Decreased maintenance frequency *For product details, please see the link below. *For more information, please refer to the PDF document or feel free to contact us.

Company：吉田ＳＫＴ
Price：Other

Resin mold
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bi-Coat for Electronic Components: Improved Release Properties of Precision Molds

Improving the release properties of injection molding molds and achieving micron-level dimensional accuracy.

In the electronic components industry, the miniaturization and high performance of products demand precise molding of molds. Particularly in the manufacturing of electronic components with fine shapes and complex structures, the release properties of the molds become a crucial factor that affects product quality. Poor release can lead to product deformation or damage, resulting in a decrease in yield. Bycoat extends the lifespan of molds and enables stable production due to its excellent release properties, sliding properties, and wear resistance. 【Application Scenarios】 - Injection molding molds for precision electronic components - Molds requiring micron-level dimensional accuracy - Molds used in harsh environments 【Benefits of Implementation】 - Prevention of yield loss due to poor release - Extension of mold lifespan - Stable supply of high-quality products For more details, please download the materials or contact us.

Company：吉田ＳＫＴ
Price：Other

Other surface treatment equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrostatic prevention fluororesin coating "Safron®" (static electricity countermeasure)

Eliminate particle and ESD defects caused by static electricity. Unique coating that achieves both static prevention and non-stick properties.

Static electricity causes many problems in semiconductor manufacturing processes, such as particle adhesion, ESD damage, and powder attachment. Yoshida SKT's unique electrostatic prevention fluororesin coating "Safron(R)" achieves both static electricity prevention and non-stick properties through the addition of conductive materials. It supports a wide range of surface resistivity from 10^5 to 10^11 ohms/sq, and custom settings can be tailored to meet process needs. Yoshida SKT is one of the few authorized processors of Teflon(TM) coatings, with over 2,000 achievements and hundreds of surface treatment technologies as specialists. Please share your desired level of static electricity prevention and usage environment. Detailed specifications, case studies, and selection guides can be found in the materials. We encourage you to download the materials and make use of them.

Company：吉田ＳＫＴ
Price：Other

others
Other semiconductor manufacturing equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating for Semiconductor Manufacturing Equipment Transport Processes

From preventing scratches and chips on the transport handle to measures against corrosion of the structure. Coatings that enhance the reliability of wafer transport.

In semiconductor manufacturing, wafer transport devices play an extremely important role. By applying a fluororesin coating to the surface of the transport hand, we can prevent chipping and scratching of the wafers, contributing to improved yield. Additionally, applying the coating to the body and metal screws exposed to chemical environments helps suppress rust and corrosion, achieving longer equipment lifespan and stable operation. Yoshida SKT, as a pioneer in Teflon(TM) coating, has a track record of over 2,000 companies and can offer optimal grade selection and customization proposals tailored to the shape of transport parts and their usage environments. We will propose the best solution from hundreds of surface treatment technologies to address your challenges. For detailed technical information and case studies, please download the materials for review.

Company：吉田ＳＫＴ
Price：Other

Other semiconductor manufacturing equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical-resistant coating for semiconductor manufacturing equipment

Chemical stability that withstands various chemical environments. An optimal fluororesin coating for corrosion prevention in semiconductor manufacturing equipment.

In semiconductor manufacturing processes, various chemical solutions, including acidic and alkaline ones, are used, making corrosion of equipment parts a significant challenge. Fluoropolymer coatings form chemically very stable films and exhibit high resistance to a wide range of chemical environments. They also accommodate temperature ranges according to the grade, maintaining stable performance over long periods. This contributes to the longevity of equipment, reduction of maintenance costs, and realization of stable operations. Yoshida SKT, as a pioneer in Teflon(TM) coatings, has extensive experience in the semiconductor field and offers optimal grade selection and customization proposals based on chemical conditions and usage environments. For more detailed information, please download the materials and check.

Company：吉田ＳＫＴ
Price：Other

Other semiconductor manufacturing equipment
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Why do paints and inks stick to containers?

"There's a waste of paint left in the container" and "Cleaning during color changes is difficult." We will introduce the causes of these issues and the ideas for improvement through surface treatment.

In workplaces that handle liquid materials such as paints, inks, and adhesives, the adhesion of materials to the inner walls of containers and tanks leads to raw material loss and increased cleaning costs. ■ Why do liquid materials stick? Paints and inks contain components such as pigments, resins, and solvents. As the solvent evaporates, the concentration of the resin component increases, causing the viscosity to rise and solidify on the container walls. Once solidified, the paint film has a strong adhesion to the metal surface and cannot be easily removed. Additionally, prolonged storage and repeated use lead to the accumulation of thin layers of paint film on the inner walls of the container, further worsening the sticking issue. Yoshida SKT has a proven track record of non-stick coatings for paint and ink containers. If you are struggling with residual liquid loss or cleaning tasks, please feel free to consult us. *For detailed information about the coating, you can download the PDF or contact us at your convenience.

Company：吉田ＳＫＴ
Price：Other

Processing Contract
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Three features of "Bicoat®" - durability, wear resistance, and non-stick properties.

Long-lasting even in harsh usage environments. Exhibits excellent release properties with highly adhesive substances.

The features of "Bicoat(R)" can be summarized in three main points. The first is "remarkable durability." It has high hardness, making it resistant to scratches and suitable for long-term use. The second is "excellent wear resistance." With a high surface hardness, it is strong against wear, ensuring longevity even in harsh usage environments. The third is "superior non-stick and release properties." It demonstrates excellent release properties even against highly adhesive substances. Additionally, it allows for micron-level dimensional precision, making it suitable for applications requiring dimensional accuracy such as precision parts and molds, and it also possesses pressure resistance to maintain performance in high-pressure environments. *For more details, please download the PDF or contact us.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evolution version "Biocourt(R) Exceed" CR/HR series

Further improved non-adhesiveness, corrosion resistance, and heat resistance. Ideal for molds using resins with strong adhesion.

"Bycoat® Exceed" is an evolved product that enhances the non-stick properties, corrosion resistance, and heat resistance in addition to the basic performance of the conventional Bycoat®. It demonstrates more reliable release properties and durability in applications such as molds that use resins with strong adhesion. The series has two variations. In addition to the basic performance of Bycoat® (high hardness, long lifespan, dimensional stability), "Exceed CR" improves corrosion resistance, while "Exceed HR" enhances heat resistance.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【技術Q&A】バイコート(R)の耐熱温度～260℃対応も～

フッ素樹脂の連続使用温度と同程度。高温環境には耐熱強化HRシリーズを用意

『バイコート(R)』の耐熱温度は使用するグレードによって異なります。フッ素樹脂を使用したグレードでは、一般的なフッ素樹脂の連続使用温度と同程度の260℃に耐えるものもあります。ただし、具体的な耐熱温度は採用するグレードや使用環境によって異なります。また『バイコート(R)エクシードHR』シリーズは特に耐熱性を高めたグレードで、より高温の環境でもご使用いただけます。具体的な使用温度条件については、技術営業担当にご相談ください。

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Main uses of "Safron(R)" - Measures against adhesion due to static electricity.

Wide-ranging support from dust adhesion prevention to transport guides, chemical tanks, food equipment, and transparent parts.

"SafeLon(R)" is suitable for preventing adhesion in environments where static electricity is a concern, such as preventing the adhesion of dust due to static electricity. By processing conveyor guides and chutes, it helps prevent poor flow and clogging during transport. In piping and chemical tanks, its chemical resistance contributes to protection from corrosion and improved safety. In stirring blades, it prevents the adhesion of chemicals and materials, reducing cleaning efforts. In the field of electronic components, it suppresses defects and the occurrence of defective products caused by static electricity in manufacturing equipment, while in food-related equipment, it achieves prevention of food adhesion and improved cleanability. The "SafeLon(R) CC+" specialized for transparency can provide anti-static properties while maintaining transparency in glass and transparent resin components.

Company：吉田ＳＫＴ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating Product List and Ranking from 567 Manufacturers, Suppliers and Companies | IPROS GMS

Coating Manufacturer, Suppliers and Company Rankings

Coating Product ranking