Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
316～330 item / All 687 items
Beltless magnetic conveyor for gently transporting metal (magnetic) parts.
● Inclined design to eliminate the dropping of transported parts ● The parts' pathway does not move (no jamming) ● Concentrated collection without spilling attached oil ● Demagnetization of parts is performed before supply ● Mechanism designed to reduce environmental impact
A simple and accurate conveying system! A structure that adds a vertical axis to the EP series.
We would like to introduce our 2-axis transport device (Y/Z) 'ZP'. It is equipped with a roller guide system and can handle a load capacity of up to 3,125 kg. Additionally, loading and unloading from the top is possible. Please feel free to consult us when you need assistance. 【Features】 ■ Maximum load capacity of 3,125 kg ■ Repetitive positioning accuracy of ±0.02 mm ■ Loading and unloading from the top is possible ■ Simple and precise transport system ■ Structure with a vertical axis added to the EP series *For more details, please refer to the PDF document or feel free to contact us.
Equipped with a rack and pinion drive, it can support a load capacity of up to 500 kg! Features a roller guide system.
We would like to introduce our cantilever type 3-axis transport device (X/Y/Z) 'CP'. This is a cantilever beam type based on the ZP series. It features a rack and pinion drive with a roller guide system. It is effective in limited spaces, such as near factory walls. Please feel free to consult us when you need assistance. 【Features】 ■ Maximum load capacity: 500kg ■ Repetitive positioning accuracy: ±0.02mm ■ Cantilever beam type based on the ZP series ■ Effective in limited spaces, such as near factory walls ■ More affordable compared to other series, yet with the same structure *For more details, please refer to the PDF document or feel free to contact us.
Transport ultra-thin wafers with a thickness of 20μm by bending, warping, and without damage in a non-contact manner.
TAIKO wafers, ultra-thin wafers with a thickness of 20μm, and compound semiconductor wafers can be suspended and transported non-contact without damage. It does not cause stress on the wafers. Wafers with warping can also be suspended and transported non-contact without damage. The air consumption is very low, making it economical.
Transporting micro wafer chips and micro lenses non-contact.
It is non-contact. It is possible to transport small workpieces non-contact. There are no scratches or dirt attached. There is no damage.
Transport, stack, and send the film non-contact.
A device that non-contact feeds, transports, and laminates amorphous solar cells, polarizing plates, light guide plates, films, paper, and sheets. It employs a non-contact transport device called "Float Chuck" (patented), which transports films non-contact by blowing air. It does not allow scratches or dirt to adhere to the workpiece. It is also suitable for weak and fragile films.
10G glass substrate non-contact transport device
A non-contact transport device that holds and conveys workpieces in a suspended manner by ejecting gas. It employs a new mechanism for the gas ejection system, with the air ejection outlet positioned at a small angle relative to the workpiece. There is no deceleration of airflow velocity caused by friction losses due to wall contact of the airflow. The amount of negative pressure generated increases, and the efficiency of load generation improves. Compared to conventional technology, the suspension capability has significantly increased, and gas consumption has nearly halved. Therefore, it is adopted for the non-contact transport of large workpieces with high loads, particularly for the eighth generation large glass substrates (2200mm x 2200mm) used in LCDs, which had previously been avoided due to air consumption issues.
Grip and transport FPC, through-hole boards, films, and breathable non-woven fabrics without causing damage.
It grips, chucks, and transports flexible materials such as film, amorphous solar cells, paper, green sheets, non-woven fabrics, breathable materials, foams, and soft bodies. By blowing air towards the workpiece, it generates negative pressure through the Bernoulli effect, allowing it to chuck, grip, transport, stack, and handle the workpiece in a non-contact state.
The compound semiconductor wafers (GaAs, InP, GaP) are supplied through gas operation, and the wafers are non-contact suctioned and detached at a specified position.
◎Features 1. Non-contact transport of wafers at high temperatures of 450°C is possible. 2. Non-contact transport of the following notched compound semiconductor wafers (GaAs, InP, GaP) is possible. - Φ2 to 4 inch wafers - Φ2 to 4 inch x 1/4 wafers - Φ2 to 4 inch x 1/2 wafers
Adopting the gas vertical jet flow method (VGFS), the Bernoulli chuck "Float Chuck SAC type" series reduces friction loss in the gas flow.
The "Float Chuck SAC Type" series, which adopts the gas vertical jet flow system (VGFS) and reduces friction loss in the gas flow, has newly implemented this gas vertical jet flow method. The gas vertical jet flow method vertically jets the gas flow ejected from the nozzle into the cushion chamber, reducing friction loss in the gas flow within the cushion chamber, enhancing the effect of negative pressure generation, and significantly increasing the suspension capacity compared to conventional types. This results in improved holding stability, increased resistance to impact, and nearly halved gas consumption.
A rubber magnet with excellent magnetic and physical properties!
- It is a sheet-like magnet with a high energy product. - It excels in flexibility and impact resistance, with a temperature range of -40°C to +85°C. - It is designed with optimal hardness and elasticity for processing with general machining equipment, making cutting and other processing easy. - As it is an unmagnetized product, please consult with the person in charge when placing an order and specify the magnetization pattern. * Magnetization patterns: Single-sided multipole magnetization / Double-sided multipole magnetization / North-South magnetization on both sides.
A film that instantly reveals the magnetic pattern!
●The magnetization direction and width (pole gap) of magnets such as magnetic sheets and strips can be visually confirmed. *This is not a magnet. It does not adhere to steel surfaces. *We do not accept sales through the web. Please contact us.
Scissors and cutters can easily cut through iron!
●This is a product made by layering steel foil and coated paper. ●It can be cut with scissors or a cutter. ●Since it can use magnets, it can be used for various purposes. ●The following layered specifications are available: Coated paper + steel foil + coated paper "SP-P2" Coated paper + steel foil + adhesive + release paper "SP-PT" PP film + coated paper + steel foil + adhesive + release paper "SP-PTP" ●Prices vary depending on the type and size. ●Rolls and cut sales are available. ●This product is prone to folding and creasing, so please handle it with care during use and installation. ●As it is made of thin metal, please be cautious of injuries from the cut edges. *Please note that this product is not a magnet and does not have magnetic properties.
Super strong magnet display parts "Magwell"
"Magwell" realizes a freely adjustable display through its ultra-powerful magnetic force. By combining magnets in a special way, it can demonstrate magnetic force capable of withstanding loads of up to 30 kg, allowing for the proposal of a new type of spatial exhibition never seen before.
This is a wall material that can be installed on "magnet-attaching walls" thanks to the magnetic sheet on the back of Eco Karrat Plus.
"Magcarat" is a wall material processed with a magnetic sheet on the back of LIXIL's Eco-Carat. This eco-friendly Eco-Carat, which adjusts humidity and reduces odors and harmful substances, has become even more convenient as a wall material that can be easily attached and detached with magnets. It can be used on walls in entryways, living rooms, bedrooms, children's rooms, kitchens, dining areas, and washrooms. It is also suitable for walls in stores, offices, and elevators. 【Features】 ■ Can be freely and easily installed with your preferred design ■ Easy to attach and detach without using glue, nails, or screws ■ Can be restored to its original condition upon moving out, even when used on rental walls ■ Allows for easy redecorating according to the season or mood <Usage examples> Entryway, living room, children's room, kitchen, dining area, washroom, store, office, elevator *For more details, please contact us or download the PDF.
