Efficiency Product List and Ranking from 219 Manufacturers, Suppliers and Companies

Efficiency improvement in process management using an 8-point input/output board for the manufacturing industry.

Select the frequency according to the site, and visualize the process with 8-channel contact transmission.

In manufacturing process management, it is important to grasp the operational status and abnormalities of equipment in real-time and to take prompt action. Particularly in large factories or production lines that span multiple buildings, the complexity and cost of wiring become challenges. Additionally, communication stability may be compromised depending on the radio environment. This product allows for the selection of either the 429MHz band or the 1216MHz band, enabling the choice of the optimal frequency band according to the on-site radio conditions, thus achieving stable communication. By wirelessly transmitting information from eight contact points, it reduces wiring costs and enables flexible system construction. 【Usage Scenarios】 - Monitoring equipment operational status within the factory - Detecting abnormalities in the production line - Confirming process progress from remote locations - Managing processes across multiple buildings 【Benefits of Implementation】 - Reduction of wiring costs - Real-time understanding of process status - Prompt response to abnormalities - Improvement in production efficiency

Company：Circuit Design, Inc.
Price：10,000 yen-100,000 yen

Communications
Remote Control
controller
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Positioning Sensor for Logistics: Streamlining Inventory Management

Accurate inventory management through the measurement of the number of times a magnet passes. Also for non-contact detection of elevator car position.

In the logistics industry, accurate inventory management and swift inbound and outbound operations are essential. Particularly, understanding the movement of products in real-time is crucial for optimizing inventory and reducing losses. Our positioning sensors accurately measure the number of times a magnetic body passes, allowing for real-time tracking of inventory movement. This leads to improved accuracy and efficiency in inventory management. 【Use Cases】 - Counting product movements within the warehouse - Detection of passage at inbound and outbound gates - Detection of elevator basket positions 【Benefits of Implementation】 - Real-time understanding of inventory levels - Increased efficiency in inbound and outbound operations - Reduction in inventory management costs

Company：MACOME CORPORATION NAGANO TOKYO OSAKA NAGOYA HIROSHIMA
Price：Other

switch
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient sorting operations using a magnet's N-pole and S-pole identification device for logistics.

Instantly distinguish between the N pole and S pole of a magnet. Contributes to the efficiency of sorting tasks.

In the logistics industry, accurate sorting of products is required. Particularly in the sorting of products and parts that utilize magnets, misidentification of the North and South poles can lead to decreased work efficiency and potential shipping errors. Our North and South pole identification machine for magnets supports the efficiency of sorting operations by quickly and accurately distinguishing between the North and South poles of magnets. 【Usage Scenarios】 * Sorting of magnet-equipped parts * Inspection of products utilizing magnetism * Integration into manufacturing lines 【Benefits of Implementation】 * Reduction in sorting operation time * Decrease in the risk of shipping errors * Alleviation of worker burden

Company：MACOME CORPORATION NAGANO TOKYO OSAKA NAGOYA HIROSHIMA
Price：Less than 10,000 yen

Sensors
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiency Improvement of Harness Processing with Zeta 650 for the Automotive Industry

Equipped with up to 36 types of wires, it automates harness processing without the need for setup changes, contributing to increased productivity.

In the automotive industry, as the electrification of vehicles progresses, the demand for wire harnesses is increasing. The harness processing stage is a critical factor that influences quality and delivery times, necessitating the establishment of an efficient production system. Manual harness processing comes with risks such as increased labor costs, variability in quality due to the skill level of workers, and the potential for delivery delays. The Zeta 650 addresses these challenges and contributes to improving productivity for automotive manufacturers and suppliers. 【Usage Scenarios】 - Production lines of automotive manufacturers - Wire harness suppliers - Prototype and small-scale production 【Benefits of Implementation】 - Reduces harness processing production time by up to approximately 50% (manufacturer's estimate) - Reduces labor costs - Stabilizes quality - Shortens delivery times

Company：シュロニガージャパン（Komaxグループ）
Price：Other

Other processing machines
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

KTHB Fix for Manufacturing: Streamlining with Manual Taping

Efficient taping with manual processing! Compact tabletop taping tool.

In the manufacturing industry, the taping of wires and cables is essential to ensure product quality and safety. However, manual taping is time-consuming and labor-intensive, which can reduce work efficiency. This challenge becomes particularly evident in the production of small quantities of diverse products and in taping short cables. KTHB Fix is an efficient and space-saving tool for mobile taping or spot taping that can process short distances without downtime. This enables the optimization of taping operations in manufacturing settings. 【Usage Scenarios】 * Taping very short tape lengths or branched short cables * Taping operations in small-batch, diverse production * Mobile taping or spot taping 【Benefits of Implementation】 * Optimized processing time without downtime * Direct taping immediately without insertion into equipment * Efficient taping through manual processing

Company：シュロニガージャパン（Komaxグループ）
Price：Other

Other processing machines
Taping Machine
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient Management of Patient Information with HT330 LTE for Medical Use

4G-LTE compatible handheld terminal that streamlines patient information management.

In the healthcare industry, accurate management and quick access to patient information are essential. Particularly in situations such as examinations, tests, and medication, it is important to smoothly reference and record patient information. Handwritten records and delays in accessing information can increase the risk of medical errors and decrease operational efficiency. The HT330 LTE supports 4G-LTE, allowing access to patient information not only within the hospital but also in various locations, such as during home visits. With a high-performance scanning engine for barcode reading, it enables rapid and accurate data entry. 【Usage Scenarios】 - Confirming patient information in the ward - Inputting test data - Managing medications - Accessing information during home visits 【Benefits of Implementation】 - Rapid referencing and recording of patient information - Reduced risk of medical errors - Improved operational efficiency - Cost reduction

Company：ユニテック・ジャパン
Price：10,000 yen-100,000 yen

2D Code Reader
Other packaging materials
PDAs and handheld terminals
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HT330 LTE Fishing Industry Efficiency Improvement

Streamlining the unloading process! 4G-LTE compatible handheld terminal

In the fishing industry, quick and accurate information management is essential for landing operations. Accurately recording and tracking the types, quantities, and quality of fish that have been landed is crucial for managing catch volumes, maintaining quality, and ensuring rapid supply to the market. Traditional paper-based records and manual input are time-consuming and prone to human error, which can lead to decreased operational efficiency. The HT330 LTE addresses these challenges by recording and managing landing information in real-time. 【Use Cases】 - Recording the species, quantity, and size of landed fish - Recording the landing location and catch date and time - Recording quality inspection results - Integration with inventory management systems 【Benefits of Implementation】 - Improved accuracy of landing information - Significant improvement in operational efficiency - Optimization of inventory management - Enhanced traceability

Company：ユニテック・ジャパン
Price：10,000 yen-100,000 yen

2D Code Reader
Other packaging materials
PDAs and handheld terminals
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For the Automotive Industry] Process Efficiency Improvement with IZS Raw Nails

Stable supply with high quality and a rich lineup! Streamline automotive manufacturing with IZS raw nails.

In the automotive industry, there is a constant demand for the efficiency of manufacturing processes. Particularly in the processing of parts, high precision and stable fixation are crucial. The quality of the workholding jaws significantly impacts processing accuracy, affecting the rate of defective products and production efficiency. IZS workholding jaws achieve high quality and stable supply, contributing to the efficiency of processes in automobile manufacturing. 【Usage Scenarios】 - Lathe processing of automotive parts - Fixation of various metal parts - Support for small-batch production of diverse products 【Effects of Implementation】 - Improvement in processing accuracy - Reduction in defect rates - Increase in productivity

Company：IZUSHI
Price：Other

Processing Jig
Other consumables
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiency improvement of the process using VQ type deforming pump for minced meat transfer.

Solving the issues of poor shaping of minced meat and the burden of manual transfer with one pump.

Cracks and weight variations that occur during the molding process on processing lines for hamburgers and meatballs. Many of the root causes of these issues lie in the "air bubbles" trapped during the kneading and transfer processes. The sticky minced meat does not naturally release air, so molding it as is leads to reduced yield. Additionally, many sites face challenges with manual feeding into molding machines due to difficulties in transferring through piping, resulting in increased workload. Our "Deforming Pump VQ Type" solves these issues with a single piece of equipment. - Simultaneous processing of "transfer" and "defoaming" → Creates a strong vacuum inside the pump, removing air while transferring minced meat through piping. - Improved yield and stable quality → Provides a stable supply of minced meat free of air bubbles to the molding machine, preventing weight variations and the occurrence of cracks and cavities during molding. - Labor-saving and space-saving Automates the labor-intensive manual feeding process. Since large dedicated vacuum equipment is not required, it can be compactly integrated into existing lines.

Company：伏虎金属工業
Price：Other

Other pumps
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Events] WRS-230: Streamlining Admission Management

Smooth entry management for events! A wearable ring scanner that can also read QR codes.

In the event industry, smooth check-in for attendees and congestion alleviation are required. Particularly for large-scale events or events where attendees concentrate at certain times, the efficiency of entry management is crucial. Manual ticket verification and traditional barcode readers can be time-consuming and labor-intensive, potentially increasing wait times for attendees. The WRS-230 can be operated with a single finger, allowing for quick entry management while keeping both hands free. 【Usage Scenarios】 - Entry check-in at event venues - Reading QR codes and barcodes on tickets - Verification of membership cards and identification 【Benefits of Implementation】 - Reduced wait times for attendees - Decreased burden on staff - Smooth event operation

Company：アイメックス
Price：10,000 yen-100,000 yen

Handheld barcode reader
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiency improvement with label printers for food labeling and inventory management for food supermarkets.

A label printer that streamlines expiration date management. Quick issuance with easy operation. Compliant with food labeling laws. Easy to install and maintain, providing peace of mind!

In the operation of food supermarkets, managing product freshness and providing accurate information to customers are crucial. In particular, managing expiration dates is essential to ensure food safety and reduce waste. Mistakes in printing expiration dates or inadequate management can lead to a loss of customer trust and potential food hygiene issues. This product is equipped with Android OS and comes standard with Wi-Fi and Bluetooth, allowing for easy issuance of expiration date labels from anywhere in the store. This supports the efficiency of expiration date management tasks. 【Usage Scenarios】 - Issuing expiration date labels in-store - Product management in the backroom - Creating labels for time-limited sales 【Benefits of Implementation】 - Improved accuracy in expiration date management - Contribution to reducing food waste - Reduction of human errors - Enhanced operational efficiency

Company：新盛インダストリーズ
Price：Other

Printer
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Smart printing and efficiency with inkjet printers for construction sites.

Streamline material management. Printing on wooden tags is easy and speedy. Affordable and easy to implement and maintain. Great cost performance.

At construction sites, accurate and easy-to-understand information display is required for the identification and management of materials. In particular, materials such as wood often have varying shapes and thicknesses, making it difficult to address these issues with conventional printing methods or resulting in time-consuming handwritten solutions. This can lead to an increased risk of misidentification and management burdens. Our product provides a solution that can flexibly print on various shapes and thicknesses of materials, such as wooden tags and wooden parts, supporting the efficiency and quality stabilization of material management. 【Usage Scenarios】 - Printing part numbers and lot numbers on materials - Printing management codes on wood - Temporary material displays on-site - Accommodating materials with different shapes and thicknesses 【Benefits of Implementation】 - Improved accuracy in material management - Enhanced work efficiency - Reduction of handwritten errors - Prevention of misidentification through highly visible displays

Company：新盛インダストリーズ
Price：Other

Commercial printers
Printer
Inkjet printer
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Streamlining Quality Control with AI Connect for the Manufacturing Industry

AI Connect supports quality control in the manufacturing industry.

In quality management within the manufacturing industry, maintaining and improving product quality and reducing defective products are important challenges. In particular, quality management systems that rely on individual expertise tend to cause issues such as knowledge dispersion due to personnel transfers or retirements, and variations in quality standards. AI Connect addresses these challenges by providing information through customer-specific AI and utilizing internal data to support the efficiency of quality management operations and enhance quality. 【Use Cases】 - Responding to inquiries related to quality management - Confirming quality standards and inspection procedures - Searching for information on past quality issues 【Benefits of Implementation】 - Increased efficiency for quality management personnel - Standardization of knowledge related to quality - Reduction in the rate of defective products

Company：タック株式会社（イビデングループ）営業統括部　産業・公共営業グループ
Price：Other

Corporate information portal/groupware
CTI Support Center
Other information systems
Efficiency

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiency Improvement of Risk Assessment Using AI Connect for Financial Institutions

AI Connect supports the risk assessment operations of financial institutions.

In the financial industry, it is important to accurately assess customer credit risk and market risk in order to make appropriate management decisions. Especially in today's rapidly changing environment, quick and precise risk assessment is required. AI Connect supports financial institutions in streamlining their risk assessment operations. 【Use Cases】 * Customer credit risk assessment in loan screening * Market risk analysis in investment decisions * Information gathering related to compliance 【Benefits of Implementation】 * Reduction in time and costs associated with risk assessment * Improvement in assessment accuracy * Realization of swift decision-making

Company：タック株式会社（イビデングループ）営業統括部　産業・公共営業グループ
Price：Other

Corporate information portal/groupware
CTI Support Center
Other information systems
Efficiency

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient hygiene management with a space-saving terminal block for food manufacturing.

A low-wiring terminal block that supports hygiene management in food manufacturing.

In the food manufacturing industry, hygiene management of the production line is extremely important. To prevent foreign matter contamination and pollution, the cleanliness and maintainability of equipment are required. A complex wiring setup makes cleaning difficult and increases the risk of failure. Our reduced-wiring terminal blocks support hygiene management by reducing the number of wires and improving cleanliness and maintainability. 【Usage Scenarios】 - Control panels for food manufacturing lines - Areas with high cleaning frequency - Locations requiring measures against foreign matter contamination 【Benefits of Implementation】 - Increased efficiency in wiring work - Reduced cleaning time - Lower risk of failure

Company：キムラ電機
Price：Other

Wiring materials
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient inventory management with a wireless communication repeater for retail.

It enables wireless communication even in places where radio waves cannot reach or where there are obstacles.

In the retail industry, smooth information sharing between warehouses and stores is crucial for inventory management. However, issues such as weak or interrupted radio signals can arise due to the building's structure and product placement. This can lead to delays in inventory checks and picking operations, potentially decreasing operational efficiency. Our wireless communication repeaters provide stable communication even in areas with poor signal reception or obstacles, supporting the efficiency of inventory management. 【Usage Scenarios】 - Inventory checks within the warehouse - Information sharing between stores and warehouses - Backroom operations 【Benefits of Implementation】 - Reduced inventory check time - Decreased operational errors - Improved operational efficiency

Company：STJグループ（株式会社サンテレコムジャパン、株式会社STJレンテック）
Price：Other

Wireless LAN
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Utilizing sheet readers for electronic component manufacturing! Streamlining receiving and acceptance efficiency S127

Streamlining invoice processing in electronic component manufacturing sites! Sheet reader and new feature package software.

In the electronic components manufacturing industry, accurate information capture at the receiving stage serves as the foundation for quality control and inventory management in subsequent production processes. Inaccurate document processing and data entry can lead to the use of incorrect parts and inventory discrepancies, potentially resulting in decreased production efficiency and quality issues. Our sheet reader and document reading package software addresses these challenges by smoothly handling barcode reading and data digitization, contributing to reduced work time and minimized input errors. 【Usage Scenarios】 - Document processing at the materials receiving desk - Reading serial numbers and registering them in the system - Data verification during incoming inspections 【Benefits of Implementation】 - Reduced work time for receiving and acceptance operations - Improved accuracy due to reduced data entry errors - Enhanced efficiency in serial management and strengthened traceability

Company：フェニックス
Price：Other

Other core systems
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contributing to work efficiency through insert molding.

By inserting multiple materials in advance, it is possible to shorten delivery times and reduce costs.

"Insert molding" is a method of creating composite parts by injecting resin around metal components that are inserted into a mold. Matsuyama Technical Works develops and manufactures high-quality built-in antennas for mobile and portable devices finished through insert molding, providing them to customers. By inserting multiple materials, subsequent processes can be shortened. This allows for smoother operations and reduces delivery times. Additionally, the reduction of unnecessary processes leads to cost savings, enabling us to offer products to customers at a lower price. *For more details, please download the PDF or feel free to contact us.*

Company：松山テクニカルワークス
Price：Other

switch
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient customer analysis with KIWI310 for retail.

The ultra-compact PC KIWI310 supports customer analysis in the retail industry!

In the retail industry, it is important to analyze customer purchasing behavior and implement optimal product displays and promotions. To analyze customer data in real-time and utilize it for sales strategies, a high-performance and space-saving PC is required. The KIWI310, with its compact design, is equipped with an Intel® Celeron® Processor N3350 and supports Windows, Linux, and Android operating systems, making it flexible for various customer analysis systems. 【Usage Scenarios】 - Customer behavior analysis in stores - Sales analysis linked with POS data - Integration with digital signage 【Benefits of Implementation】 - Product proposals tailored to customer needs - Increased sales - Improved customer satisfaction

Company：三協インタナショナル
Price：Other

Industrial PCs
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improving blowing efficiency with air nozzles for the automotive industry.

Promotes blow drying after cleaning with laminar air. Achieves energy savings and quiet operation.

In the automotive industry, improvements in quality such as efficient drying, water removal, and debris blowing are required during the blow-off process after cleaning. In particular, the length of drying time can be a factor that reduces production efficiency. The multi-channel jet from Rehila promotes uniform drying through laminar air flow, contributing to a reduction in drying time. Additionally, it helps to keep noise levels down and leads to energy savings. 【Application Scenes】 - Drying (blow-off) process in cleaning lines for automotive parts, etc. - Drying of parts after cleaning - Water removal process 【Effects of Implementation】 - Reduction in drying time - Improvement in quality - Reduction in noise levels - Energy-saving effects

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Pneumatic Equipment
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Nozzle FL-600E for Metal Processing: Improving Deburring Efficiency

Powerful impact force with laminar flow! Contributes to the efficiency of deburring operations and noise reduction measures.

In the metal processing industry, the removal of burrs after machining is a crucial process that affects quality. Burr removal requires high impact force and work efficiency. Additionally, the noise issues in the working environment cannot be ignored. The Rehiller multi-channel jet FL-600E effectively removes burrs with powerful impact force generated by laminar flow while suppressing noise levels. The orifice cover reduces air waste and contributes to energy savings. 【Usage Scenarios】 - Burr removal from metal parts - Burr removal after cutting processes - Burr removal after pressing processes 【Benefits of Implementation】 - Increased efficiency in burr removal operations - Reduced noise levels - Decreased air consumption

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Pneumatic Equipment
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Streamline reception services at hotels and offices! 'Facial recognition camera'

Automate customer detection in front of the reception with facial recognition cameras! With recognition in as little as 1.5 seconds, it quickly verifies customer information, contributing to the efficiency and reduction of personnel in reception tasks!

The "JVS-AVD01" is a facial recognition camera that can detect VIPs and persons of interest by referencing pre-registered facial images (customer information). By registering the facial images of visitors through the facial recognition camera, quick facial recognition can be performed upon their arrival. It can register up to 10,000 faces, with a maximum simultaneous recognition of 8 people, significantly contributing to the efficiency of reception operations in hotels and offices. 【Features】 ■ Capable of registering 10,000 faces with a single unit ■ Maximum simultaneous recognition of 8 people ■ Identifies visitors and improves the efficiency of reception operations, etc. *For more details, please download the PDF or contact us.

Company：GeoVision
Price：Other

Other security and surveillance systems
Surveillance Cameras
Surveillance Camera System
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For the Food Industry] Improving Operational Efficiency in Logistics Warehouses with RFID - White Paper

Streamlining food freshness management with RFID: An explanation of challenges and implementation effects.

In the food industry, strict freshness management is required to maintain quality and ensure safety. Particularly in the handling of fresh foods and products that require temperature control, accurate information gathering and prompt responses are essential for inventory management and stock handling. Inadequate management can lead to a decline in quality, an increase in food waste, and potentially a loss of trust from customers. Our white paper introduces methods to address these challenges through the use of RFID for managing rental products and tracking their check-out and return, thereby achieving operational efficiency in logistics warehouses. - What is RFID? Features and differences from barcodes - Challenges in rental product management - Overall image utilizing RFID - Effects of RFID implementation (receiving, shipping, inventory management, stocktaking)

Company：ダイオーミウラ
Price：Other

IC tag
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

White Paper on Improving Operational Efficiency in Logistics Warehouses for the Automotive Industry Using RFID

Utilizing RFID for automotive parts tracking: An explanation of challenges and implementation effects.

In the automotive industry, there is a demand for the management of numerous parts and the assurance of traceability. In particular, the accurate tracking of parts is crucial for the smooth operation of production lines and quality control. Incorrect delivery of parts or inventory shortages can lead to production delays and increased costs. This white paper will introduce the efficiency of parts management utilizing RFID, highlighting current challenges and implementation effects with specific examples and illustrations. 〇 What is RFID? Characteristics and differences from barcodes 〇 Challenges in rental product management 〇 Overall image utilizing RFID 〇 Effects of RFID implementation (receiving, shipping, inventory management, stocktaking)

Company：ダイオーミウラ
Price：Other

IC tag
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

White Paper on Improving Operational Efficiency in Logistics Warehouses for Construction Materials Using RFID

Streamlining the identification and management of construction materials with RFID. Explaining the challenges and implementation effects.

In the construction materials industry, accurate material identification on-site and the associated efficiency in inventory management are required. Particularly in sites where a wide variety of materials are mixed, visual confirmation and manual recording can lead to errors and time loss. Accurate material identification is essential for preventing project delays and reducing costs. This white paper clearly explains the current challenges and the benefits of implementing RFID for the identification and management of construction materials, using specific examples and illustrations. - What is RFID? Features and differences from barcodes - Challenges in rental product management - Overall image utilizing RFID - Effects of RFID implementation (receiving, shipping, inventory management, stocktaking)

Company：ダイオーミウラ
Price：Other

IC tag
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Publishing and Media] Improving Logistics Warehouse Efficiency with RFID - White Paper

Solving the challenges of book management. An illustrated explanation of the effects of RFID implementation.

In the publishing and media industry, accurate inventory management and rapid distribution of books are essential. In particular, efficiently managing a large number of books and smoothly conducting inventory checks and inbound/outbound operations directly contribute to operational efficiency and cost reduction. However, traditional barcode management has the challenge of requiring individual scanning, which can be time-consuming and labor-intensive when handling a large volume of books. Our RFID utilization white paper specifically explains how RFID technology, which allows for non-contact reading of multiple tags simultaneously, can address these challenges. - What is RFID? Features and differences from barcodes - Challenges in rental product management - Overall image utilizing RFID - Effects of RFID implementation (receiving, shipping, inventory management, stocktaking)

Company：ダイオーミウラ
Price：Other

IC tag
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient field work with the latest technology 'SigmaSORT BEAM'

Achieving a reduction of 40 hours per month and 480 hours per year in labor! Cleanup can be completed faster and more accurately compared to conventional methods. *Video available now.

"Sigma Sort" utilizes projection mapping to streamline sorting (picking tasks). By highlighting the parts to be picked, it reduces the labor time for tidying up by 50%, achieving a reduction of 40 hours per month and 480 hours per year. Additionally, the highlighting of parts significantly contributes to the eradication of human errors, such as the misidentification of similar parts. For more details, please watch the video below. 【Features】 ■ The parts to be picked are highlighted, making tidying up overwhelmingly easier. ■ Hands-free switching between highlighted groups is possible. ■ Tidying up is completed faster and more accurately compared to conventional methods. ■ It also prevents the picking of similar parts, leading to a significant reduction in mistakes. ■ Going paperless contributes to environmental protection and reduces costs for paper and toner. *For more details, please watch the video below and feel free to contact us.

Company：シグマテックジャパン
Price：Other

3D CAM
Other CAM related software
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Standardization and efficiency of the drafting process for agreements and contracts!

A new contract creation support system that provides comprehensive support from manuscript preparation, editing, content management, to output.

NEXTDarwin (Terms and Contract Creation Support System) 【Features】 ◆ Document management and creation through modularization - By modularizing documents for management and creation, the processes of drafting and revising can be standardized and made more efficient. ◆ Output generated through automatic typesetting - A unified format that is not dependent on individuals can be generated in a short time. ◆ Creation process completed using only a web browser - Smooth and efficient document creation is possible through group work. *For more details, please refer to the PDF materials or feel free to contact us.*

Company：ネクストソリューション
Price：Other

Document and Data Management
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficient Manual Management with i-ShareDX for Educational Institutions

Streamlining manual management in the education field with the cloud!

In the education sector, the management of manuals used by faculty and students, as well as accessibility to information, is crucial. In particular, information related to school operations and classes, as well as manuals for various procedures, must always be kept up to date and easily accessible to everyone when needed. If information is not organized, it can lead to delays and mistakes in operations, potentially affecting the quality of education. i-Share DX realizes centralized management of manuals and efficient operations, supporting the streamlining of tasks in educational settings. 【Usage Scenarios】 - Management of manuals for faculty and staff in schools and educational institutions - Dissemination of various application procedures and internal rules 【Effects of Implementation】 - Improved searchability of manuals and enhanced accessibility to information - Increased efficiency in information sharing and reduced work hours - Faster information updates and provision of the latest information

Company：株式会社クイックス
Price：Other

Document and Data Management
Efficiency

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Efficiency Product List and Ranking from 219 Manufacturers, Suppliers and Companies | IPROS GMS

Efficiency Manufacturer, Suppliers and Company Rankings

Efficiency Product ranking