Furnace Product List and Ranking from 405 Manufacturers, Suppliers and Companies

Thermal protection device for physical and chemical instruments

This is a newly designed overheating prevention device that is available at a low price.

It detects abnormal temperature rises due to a malfunction of the temperature controller in heating equipment with sensors and cuts off the power supply. It is a useful device for preventing overheating accidents.

N2 Reflow Device VFR-4010N

Achieve easy maintenance with a special filter! You can switch between hot air, warm air, and warm air + far infrared!

The "N2 Reflow Device VFR-4010N" is a unit that combines a unique heating method using a special far-infrared panel heater along with hot air circulation. Depending on the substrate (thickness) and mounted components, it is possible to utilize not only hot air circulation but also the advantages of far-infrared effects for production. This device is designed with consideration for substrates and components. 【Features】 ■ Hot air circulation reflow oven with far-infrared combination ■ Adoption of special far-infrared panel heater ■ Minimizes flux accumulation in the oven, extending maintenance intervals ■ Special filter for mist recovery in the oven (can be reused after cleaning) ■ Energy-saving through reduced heat loss with high-efficiency insulation structure *For more details, please refer to the PDF materials or feel free to contact us.

Far Infrared Combined Hot Air Circulation Reflow Oven "VFR Series"

Decomposing flux with a special far-infrared panel heater to prevent sticking inside the furnace!

The "VFR Series" is a reflow oven that utilizes a special far-infrared panel heater and hot air circulation system. It minimizes flux adhesion inside the oven, achieving extended maintenance periods. It also allows for mist recovery with a special filter (the filter can be reused after cleaning). Please feel free to contact us when you need assistance. 【Features】 ■ Special far-infrared panel heater and hot air circulation system ■ Minimizes flux adhesion inside the oven, extending maintenance periods ■ Mist recovery with a special filter (the filter can be reused after cleaning) *For more details, please refer to the PDF document or feel free to contact us.

Batch-type annealing furnace

Batch-type annealing furnace

[Specifications] ◆Operating Temperature: 600℃ ◆Uniformity in Furnace: 600℃ ±3℃ ◆PID Program Temperature Control ◆Internal Dimensions: Customizable to Desired Dimensions ◆External Dimensions: Width 900mm × Height 1650mm × Depth 1500mm ◆Power Supply: 3-phase 200V 20KVA

Large furnace

We provide custom-made, efficient equipment unique to heat manufacturers using optimal heat sources tailored to your needs.

We also manufacture large electric furnaces tailored to specific applications. For more details, please contact us or download the catalog.

DOWA Thermotech [Introduction of Overseas Business Company]

DOWA, with seven bases overseas, is always ready to assist you locally!

DOWA Thermotech, which actively expands its overseas business, is steadily growing its operations by leveraging its strength in total support that encompasses development, manufacturing, maintenance, and contract processing. 【Improving service to local customers through localization of procurement and sales functions!】 To promote the localization of key functions in equipment and maintenance operations, the "Global Business Department Thailand Office" was established in 2016 for ASEAN countries and India. Along with strengthening the existing engineering base, we are utilizing manufacturing processes in India and sourcing parts locally to achieve a quicker response to our customers' accelerating overseas expansion in recent years.

Kunshan Tonghe... China [Comprehensive engineering manufacturer of heat treatment]

We provide improvements in the functional characteristics of parts and other components through our own designed heat treatment equipment and the process technology accumulated at DOWA Thermotech in Japan!

Kunshan Tōwa is not just an equipment manufacturer, but a "comprehensive engineering manufacturer of heat treatment" that supports customers' heat treatment needs from all aspects, including equipment maintenance, after-sales service, contract processing services, and research and development. DOWA Thermotech Co., Ltd. actively develops its heat treatment processing business to extend the lifespan of metal materials and its industrial furnace business, leveraging the know-how accumulated in heat treatment processing. As a pioneer in heat treatment technology, it provides top-class services in both scale and quality. *For more details, please contact us or download the catalog.*

Vacuum Sintering Furnace METAL HOTZONE High-Temperature Vacuum Furnace

Stable operation can be achieved under conditions of 2000℃ in a vacuum and 1800℃ in an H2 atmosphere.

The vacuum sintering furnace (metal furnace) "FINEVAC" with a METAL HOTZONE eliminates carbon contamination by using a METAL HOTZONE. It can operate stably at high temperatures above 1800°C in a vacuum, hydrogen gas, or inert gas atmosphere. It is capable of sintering high-purity fine ceramics. The applicable materials are fine ceramics, with effective dimensions of 300×300×600, 500×500×1000, and maximum temperatures of 1300°C, 1600°C, and 2000°C, with heating elements made of molybdenum and tungsten. For more details, please contact us or refer to the catalog.

MIM and CIM dedicated "High-Temperature Vacuum Debinding Sintering Furnace"

The continuous process from degreasing to sintering significantly improves product yield! Uniform temperature distribution and heating. Contributes to increased productivity through forced gas cooling.

The MIM and CIM dedicated vacuum degreasing and incineration furnace is a vacuum degreasing sintering furnace developed specifically for MIM and CIM. By using paraffin wax degreasing under high vacuum, the degreasing time is reduced to one-third of the conventional time. It is possible to continuously process degreasing and sintering in both vacuum and atmospheric conditions. It employs a dedicated retort box and gas inflow system to enhance degreasing performance. 【Features】 ○ Prevention of product oxidation and carbon control ○ Maintenance-free degreasing system ○ Compatible with a wide range of materials ○ Heating characteristics and temperature analysis that minimize deformation ○ Reduced cooling time due to the adoption of a gas circulation cooling system ○ Fully automatic operation through programming *For more details, please contact us or download the PDF.

Gas heating method endothermic gas reformer [Reducing manufacturing costs and CO2 emissions!]

Significantly reduce manufacturing costs! Gas heating method heat-absorbing gas reformer that reduces CO2 emissions.

The "Gas Heating Type Endothermic Gas Reforming Furnace" employs a regenerative gas burner, achieving improved environmental performance, reduced C2 emissions, and lower energy and maintenance costs with a footprint similar to that of electric heating systems. We also offer electric heating reforming furnaces with the same installation area as gas heating reforming furnaces. 【Features】 ■ Significantly reduces the production cost of reforming gas through the use of a swirling flow regenerative burner ■ Incorporates new mechanisms such as double-pass retort, pulsation-free blower, and special heating systems ■ Reduces CO2 emissions and greatly enhances environmental performance ■ Like conventional electric heating, it is sting-free and almost completely prevents soot generation inside the retort *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Heat Treatment Furnace TKM Series [Uniform Heating, Carburizing, Cooling Performance]

Excellent uniform heating and cooling performance! A heat treatment furnace designed with consideration for quality control and maintenance.

The "TKM Series Heat Treatment Furnace" excels in uniform heating, carburizing, and cooling performance, while also considering quality control and maintenance. In addition to traditional brick furnaces, we have developed ceramic furnaces, electric heating furnaces, and gas heating furnaces, broadly responding to the diverse needs of the heat treatment industry both domestically and internationally. 【Features】 ■ Achieves energy savings with high-efficiency regenerative gas burners ■ Reduces CO2 emissions by over 30%, improving environmental performance ■ Shortens total lead time by 20% ■ Significantly reduces surface temperature of the furnace body with a new insulation structure *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Heat Treatment Furnace S-TKM Series [Compact and Slim Continuous Furnace]

A heat treatment furnace that achieves significant productivity improvements and space-saving.

The "S-TKM Series Heat Treatment Furnace" is a compact and slim continuous furnace that significantly improves productivity compared to batch-type atmosphere heat treatment furnaces, while also achieving space-saving design. By adopting high-performance regenerative gas burners and a new insulation structure, it realizes energy savings and enhances environmental performance. 【Features】 ■ Compact and slim design aimed at space-saving ■ Production capacity is approximately three times that of conventional batch furnaces ■ Significant cost reduction in heating energy *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Enamel Firing Furnace "DELTA EVO H" [NTT Corporation]

Achieve minimal power consumption with the innovative Delta machine line! Introducing the enamel baking furnace.

The "DELTA EVO H" is an enamel firing furnace manufactured by NUOVA TECNO TAU, a specialized manufacturer of enamel firing equipment and technology. It is an evolved version of the "DELTA H." By redesigning the catalyst box, which now features a new catalyst plate called ECOPLATE, this advancement has been achieved. Additionally, it offers a lineup that includes copper wire "EVO H 16," "EVO H 20," and aluminum wire "EVO H 30 AL." 【Features】 ■ Complies with strict pollution standards applicable worldwide ■ Reduction in electrical energy consumption ■ An evolved version of "DELTA H" Operation can be performed intuitively, and the installed PC allows for recipe registration of manufacturing processes (temperature, wind speed, etc.) for each type of product. Manufacturing data is displayed clearly in charts, and the temperature and wind speed at various locations during production can be monitored on the screen. Manufacturing data can also be automatically saved daily, making it useful for development and later analysis. Notably, not only the manufacturing history but also all operational history is saved, allowing for tracking who made changes to the settings and what errors occurred, all recorded as part of the history.

Bell-type annealing furnace [Radcon Corporation]

Reduce running costs! Bell-type annealing furnace with 100% hydrogen atmosphere.

In a hydrogen atmosphere bell-type annealing furnace, various cycle times can be shortened, and the control of sealed hydrogen gas within the device can be achieved for processes such as oxide reduction, immersion, spheroidization treatment, and cooling. (RAD-CON AC/APEx, patented) Additionally, while conventional devices take a long time to reach the dew point, the time for oxide reduction can be minimized, and the immersion process can be shortened by a convection system that delivers heat to the vicinity of the rods. By maintaining the rod temperature nearly constant, the spheroidization process is shortened, and heat removal from the rods is performed more quickly. 【Features】 ■ Shortened cycle time ■ Improved wire surface ■ Suppression of oxygen removal process ■ Shortened spheroidization process ■ Prevention of decarburization ■ Existing nitrogen-type bell annealing furnaces can also be modified to hydrogen type *For more details, please refer to the PDF document or feel free to contact us.

Small-scale test electric resistance melting furnace

While verification tests can be conducted at Tanabe, we also sell small test electric resistance melting furnaces for customers who wish to carry out various verification tests.