Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 05, 2026～Sep 01, 2026
This ranking is based on the number of page views on our site.
511～540 item / All 865 items
Wire processing tooling
This is a round tool holder for JWS936, JWS946, JWS937, and JWS947. When mounted on JWS936/JWS946, the clamping range is Φ29.5 to 60. When mounted on JWS937/JWS947, the clamping range is Φ44 to 60.
Camera stand multi-camera holder
This is a highly versatile stand that can be used for various purposes, from photography to image analysis, and due to its convenience, it is a best-selling product in the SFC camera stand category. ◆Basic Functions Up and down movement, forward and backward movement, fine adjustments, rotation, horizontal adjustment.
TIDLAND knife holder
A groundbreaking knife holder that enables faster setup, improved productivity, and unparalleled slit quality. You can choose modular optional features based on your needs, accommodating requests for the introduction, modification, or alteration of the slitting process on existing machines. 《Features》 ◆ Increased productivity and reduced downtime ◆ Improved slit quality ◆ User-friendly operation, even for women ◆ Safety
A compact bit holder that securely holds bits.
Compact bit holder. Bits can be attached and detached with one hand. Two balls securely hold the bits.
A compact size that can be operated with one hand, this affordable speaker microphone is compatible with handheld devices that use a 3.5mm 4-pole 1-core plug.
The "MS800S" is a handheld speaker microphone manufactured by Daiichi Denpa Kogyo. It can be used with standard 3.5φ 4-pole 1-core plugs from Yaesu, Icom, and Alinco radios. The main body is lightweight, easy to grip, and compact, making it less burdensome to use. It features a flexible coiled cord that is resistant to tangling and breakage. A 360-degree rotating clip is included on the back of the microphone. No mounting screws are required, making it easy to install and use. An optional earphone (φ3.5mm) can be attached. 【Compatible Models】 Digital Simple Radio License Station - DJ-BU70D Digital Simple Radio Registered Station - DJ-DPS70 - DJ-DPX1 Specific Low Power Transceiver - CL120A - CL40 - FTH-615 - DJ-CH3 - FTH-314 - IC-4300 【Features】 ■ Lightweight and compact size ■ Includes a 360-degree rotating clip ■ Flexible coiled cord For extremely low-priced earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.
Four-legged base holder made by Nippon Antenna.
● The BS-78 (BS78) is a four-legged base holder manufactured by Nippon Antenna. ● It can be combined with separately sold antenna poles AP-8 (7m), AP-10 (9m), AP-12 (10.9m), and AP-14 (12.8m). ● It is used in combination with antenna poles and stay wire ropes when installing antennas such as radios. ● When constructing with the AP antenna pole, if the installation of the BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire to secure it to the base pipe, allowing for safe pole extension work. *For more details, please feel free to contact us.*
Introducing a clear folder with a spare pocket! It can store multiple documents together.
This product is a standard type holder with three holes, measuring 0.076mm in thickness, designed for inserting and removing documents from the top. It is designed for storing documents (22cm x 29cm) in an ESD protected area. The generation of static electricity is negligible and has been tested according to EIA-541. Made from a non-staining, amine-free, co-extruded polyolefin material, it allows for easy insertion and removal of documents without bringing dirt into the work area. 【Features】 ■ Does not expose ESD sensitive items to harmful ESD charges ■ Comes with an additional pocket ■ Can store multiple documents together ■ Lead-free and RoHS compliant ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Lead-free and RoHS compliant! Easy to insert and remove documents, keeping the work area clean!
This product is a thicker type with a thickness of 0.15mm, featuring a 3-hole holder that allows for insertion and removal from the top. It comes with a spare pocket, allowing for the storage of multiple documents together. It does not expose ESD-sensitive items to harmful ESD charges. Designed for storing documents (25cm x 31cm) in ESD protected areas, it generates negligible frictional electricity and has been tested according to EIA-541. 【Features】 ■ Non-staining, amine-free, co-extruded polyolefin material ■ Easy document insertion and removal, preventing dirt from entering the work area ■ Lead-free and RoHS compliant ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.
Manufactured with a special electrostatic dissipative material! Name card holder that keeps frictional electricity below 100V.
The "Electrostatic Discharge (ESD) Countermeasure Name Card Holder (Clip Type)" is a product suitable for use in electronic device manufacturing companies that handle assembly parts sensitive to static electricity. The yellow band and ESD symbol mark make it easy to see, allowing others to immediately recognize that the person wearing this name tag holder is taking ESD protection measures. The inside features anti-print, non-ESD vinyl, ensuring that ink from documents does not transfer to the document holder. 【Features】 ■ Reduces frictional electricity to below 100V ■ Made from special electrostatic dissipative material ■ Genuine American-made ■ Available in vertical, horizontal, with or without clips ■ Custom products can be manufactured *For more details, please refer to the related link page or feel free to contact us.
It is suitable for use in manufacturers of electronic devices that handle assembly components sensitive to static electricity!
We offer a horizontal "Electrostatic Discharge (ESD) Name Card Holder" for proximity readers. It suppresses static electricity to below 100V. The inside is equipped with anti-print, non-ESD vinyl, so ink from your documents will not transfer to the document holder. We have vertical and horizontal types, with or without clips. If you let us know your desired size, we can manufacture custom products. 【Features】 - Suitable for use in manufacturing electronic devices that handle assembly parts sensitive to static electricity. - Easily visible due to the yellow band and ESD symbol mark. - Clearly indicates that ESD protection measures are in place. - Made from special static dissipative materials. - Genuine American-made product. *For more details, please refer to the related link page or feel free to contact us.
Suppress static electricity to below 100V! Suitable for use in electronic device manufacturing.
We offer a horizontal "Electrostatic Discharge (ESD) Name Card Holder" with a zipper. It is suitable for use in manufacturing electronic devices that handle assembly components sensitive to static electricity. The yellow band and ESD symbol make it easy to see, allowing others to quickly recognize that the person wearing this name tag holder is taking ESD protection measures. The inside features anti-print, non-ESD vinyl, ensuring that ink from your documents does not transfer to the document holder. 【Features】 ■ Reduces frictional electricity to below 100V ■ Made from special electrostatic dissipative material ■ Genuine American-made ■ Available in vertical, horizontal, with or without clips ■ Custom products can be manufactured *For more details, please refer to the related link page or feel free to contact us.
Fujitanshi Industrial's fuse holders include fuse holders for circuit boards and panel-mounted types.
Product lineup Fuse holder
A compact stamp case that opens and closes easily with a "click"!
We would like to introduce the relay-type fuse holder "F-850/860 series" manufactured by Sato Parts, which we handle. It is strong against wire tension (no coil spring used) and comes with terminals that are easy to solder. It features a stable contact structure (gold-plated). Additionally, we also offer "F-850-L" and "F-860-L" with lead wires that do not require soldering, as well as dustproof, waterproof, and relay types "F-810" and "F-800." 【Features】 ■ Strong against wire tension (no coil spring used) ■ Terminals that are easy to solder ■ Stable contact structure (gold-plated) ■ Lead wires that do not require soldering are also available ■ Fuse blow confirmation window included *For more details, please download the PDF or feel free to contact us.
Easy access to micro-sized electrode pads!
The "electrode holder" is a tool that allows you to make contact with micro electrode pads when used. The macro type (L type), suitable for work under a stereo microscope, has a leaf spring at the tip that makes it difficult to detach after a soft touch contact. Additionally, the micro type (ESS type), designed for use under high magnification observation with microscopes, is engineered to have a probe access angle of 30°. 【Features】 ■ Ideal positioning can be achieved when combined with "Axis Pro," "Quick Pro," "Rabbit 3D," etc. ■ Various cables for connecting to measuring instruments are available. ■ Compatible with our tungsten probe series. *For more details, please contact us via the link below.
A turning device that oils precisely at the machining point for chip control in turning operations!
The "EB-TOOL" is a turning tool designed for MQL semi-dry machining, which precisely discharges cutting fluid at the processing point from both the relief face and the cutting edge. Compared to pipe nozzles, it is less affected by chips, allowing for more stable machining. It achieves a processing method that is as close to dry as possible, eliminating waste oil. It reduces the amount of cutting fluid to less than 1/60,000, contributing to cost savings. 【Features】 ■ Pinpoint lubrication is possible on both the relief face and the cutting edge ■ Fitting mounting holes can be selected on the bottom or rear of the tool ■ Achieves waste oil elimination with processing that is as close to dry as possible ■ Significantly improves factory environment ■ Extends tool life *For more details, please refer to the catalog or feel free to contact us.
We have developed a holder for wafers, disks, and circuit boards that was not needed until now.
The holding part that comes into contact with the wafer is made of PTFE fluororesin, which has excellent chemical resistance and heat resistance, and poses no risk of scratching the substrate. The USL wafer holder comes in various types, suitable for wafers, mask wafers, disks, round substrates, and square substrates, with sizes ranging from small to large.
This is a sample preparation and vacuum transport holder for vacuum deposition of metal onto samples that are sensitive to moisture and oxygen.
It is possible to transport samples between the glove box and the vacuum deposition device without exposing them to the atmosphere. Features: - Sample holder with a vacuum chamber structure - Compact size, can be transported inside the glove box - Capable of vacuum evacuation within the glove box - The chamber lid of the vacuum deposition device automatically opens - Optionally, a sample holder rotation mechanism can be added
~Environmentally friendly material plastic cover | plastic protector | roll holder~
It is used as a side panel for suspended packaging of film roll products and offers excellent safety. 【We are now selling a new size, RH-265-N.】 This is a size that has been highly requested for some time. - It is made of environmentally friendly materials for the plastic flange, plastic protector, and roll holder. - The strength to support both ends of the roll product is outstanding. - It can also be used in clean rooms. - We can offer it at a low price. - We can accommodate various sizes upon request.
We conducted high-speed machining of SUS304 using three types of blocks and observed the tool life under the same conditions!
Year by year, the demands for precision and reduced cycle times for products are becoming stronger. However, through innovations in processing methods and enhancements in tools, faster and higher quality processing is being achieved. Nevertheless, as processing conditions trend towards higher speeds, there is a tendency for tool life to decrease, making it difficult to maintain a balance between these factors. In this document, we will introduce a case study using "DAW vibration-damping alloy clamp holders" as a method for extending tool life in high-speed machining. We invite you to read it. [Contents] ■ Overview of the tests ■ Test results ■ Summary *For more details, please refer to the PDF document or feel free to contact us.
Compatible with various sample sizes! Equipped with a push-pin type contact probe.
The "VK-SH-50" is a solar cell evaluation holder equipped with spring-loaded gold-coated electrical contact probes. It is specially designed for I-V and MPPT measurements of multi-electrode solar cells, ensuring accurate and reliable results at all times. Unlike holders that require mounting bolts, this product can be quickly disassembled without any tools. 【Features】 ■ Designed with customer convenience in mind ■ Can be quickly disassembled without any tools ■ Offers both a manual selector switch and an automatic switching system designed to provide reliable and efficient performance *For more details, please refer to the PDF document or feel free to contact us.
Installed on a commercially available stand. A φ16mm crankshaft is used.
This is a stand holder for the ultrasonic homogenizer optional parts. It can be attached to commercially available stands. The clamp shaft uses a diameter of 16 mm, so please prepare compatible mounts, etc. For more details, please contact us or download the catalog.
Embedded general-purpose wiring unit
This is a wiring device that can be used with commercially available HDMI cables and other plug-equipped cables, sized for a JIS large rectangular module. During wiring work, after passing the plug through the large opening of the holder, the cable is clamped with a split cover that incorporates a packing, and then fitted into the holder. This creates a small opening that fits the cable's outer shape during use, allowing for space-saving, airtight sealing, and a neat, simple appearance.
Easy downward cut with one hand.
Both children and the elderly, as well as caregivers, can set and cut paper with one hand. It can use both core and coreless paper. The part for cutting the paper is soft and safe. The paper can be cut downwards.
Just wrap the sandpaper around it! A convenient holder that can be used like a stick file!
The "Gesuwin Corporation Matador Precision Waterproof Paper Stick Holder" is a hand stick holder for Matador precision waterproof paper. It is also possible to cut and use commercially available waterproof paper. With a one-touch attachment that simply wraps around, it improves work efficiency. You can use the paper waterproof paper like a rod file, making it convenient for detailed work. 【Features】 ■ Hand stick holder for Matador precision waterproof paper ■ Can also use commercially available waterproof paper by cutting it ■ Can use paper waterproof paper like a rod file ■ One-touch attachment improves work efficiency = significantly reduces work time *For more details, please refer to the PDF document or feel free to contact us.
You can evaluate the electrical properties of small conductive samples with AFM!
The ORCA conductive AFM probe holder allows for conductive AFM imaging and I-V measurements with all Asylum MFP-3D AFM/SPM systems. The standard module can measure currents ranging from approximately 1 pA to 20 nA. Models with different current measurement ranges and dual-gain models are also available. This conductive AFM can simultaneously measure the shape of the sample and the current distribution map. It provides valuable measurements across a wide range of material characteristics, including insulating thin films, ferroelectric films, nanotubes, and conductive polymers.
A sample holder suitable for imaging live cells and fixed cells, compatible with Petri dishes. Heats from ambient temperature to 45°C.
The Petri Dish Heater can maintain temperature-sensitive biological samples, particularly living cells, at physiological temperatures ranging from room temperature to 45˚C. This kit includes various Petri dishes, membranes to minimize evaporation, and magnetic clamps to ensure the tight fit of dishes and sample plates (compatible with all MFP-3D models except the MFP-3D Origin). There is also a non-heated version of the Petri Dish Holder (compatible with all MFP-3D models).
Observable with the TEM standard grid holder! For research in materials science, chemistry, and biology.
The "K-kit" is a tool that allows for easy TEM observation of liquid samples. It enables the characterization of nanomaterials, strong aggregates, and weak aggregates (NOAAs) in liquid. Liquid samples are encapsulated in a microchamber for use. It is utilized for research purposes in materials science, chemistry, and biology. 【Features】 ■ Can be observed using the standard grid holder included with the TEM ■ Liquid samples are encapsulated in a microchamber for use ■ Convenient, easy to use, and high performance *For more details, please refer to the PDF document or feel free to contact us.
![5-axis control machining center tool holder for shrink fit holder [Slim Line Curve]](https://image.mono.ipros.com/public/product/image/927/335321001/IPROS_15056719173730090000.jpg?w=280&h=280)
5-axis control machining center tool holder. The tip is extremely thin and slim.
Optimal Tool Holder for 5-Axis Controlled Machining Center Processing ■□■Features■□■ ■The tip is extremely thin and slim ■The base is as thick as possible ■Even if long, it has rigidity ■For other functions and details, please download the catalog or contact us.
Burnishing system for ultra-high-speed machining centers and high-precision 5-axis machining machines.
Optimal for all machining centers, including ultra-high-speed machining centers and high-precision 5-axis machining machines! A shrink-fit system that utilizes the difference in thermal expansion rates between the holder (made of special steel) and the cutting tool (made of carbide) to securely and precisely chuck the cutting tool. ■□■ Features ■□■ ■ The holder material achieves a unique low-temperature "shrink-fit" with a large thermal expansion rate developed by MST. ■ Utilizes a simple hot air shrink-fit device using an industrial dryer. ■ Offers a lineup of 3,000 shapes that can accommodate various machining needs, from high-speed and precision machining to heavy cutting, including end mills, drills, and reamers. ■ The cutting tool mounting section has no components such as nuts or collets like those found in collet chucks. ■ The simple and ultra-slim design minimizes the protrusion length of the cutting tool, providing powerful and stable gripping force while maintaining high precision. ■ For more functions and details, please download the catalog or contact us.
Pursuing machining accuracy of the holder to the limit! A shrink-fit holder that achieves runout accuracy of 1μm.
The "Slimline UNO" is an ultra-high precision integrated shrink-fit holder suitable for machining with ultra-fast, high-precision machining centers and small-diameter fine tools. By pursuing the machining accuracy of the holder to the limit and restricting the usage conditions of the tool shank, it achieves top-level runout accuracy. Additionally, we also offer the "Slimline BLACK UNO" with a runout accuracy of 0.5μm. 【Features】 ■ Runout accuracy 1μm ■ Achieves top-level runout accuracy ■ Suitable for ultra-fast, high-precision machining center processing, etc. ■ Extends the lifespan of fine small-diameter tools ■ Improves machining quality *For more details, please refer to the PDF document or feel free to contact us.
