We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Holder.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Holder Product List and Ranking from 334 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

Holder Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

  1. 富士精工 Aichi//Machine elements and parts
  2. アドバンテック東洋 Tokyo//Testing, Analysis and Measurement
  3. ハイマージャパン Osaka//Industrial Machinery
  4. 4 友鉄工業 Hiroshima//Ferrous/Non-ferrous metals
  5. 5 TAKACHI ELECTRONICS ENCLOSURE CO., LTD. Saitama//Machine elements and parts
Go to Company Ranking

Holder Product ranking

Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.

  1. High Mar Japan: Case Studies of Successful Balancing with Shrink Fit Holders ハイマージャパン
  2. Catalog holder for testing equipment for the railway industry TOKYO KOKI TESTING MACHINE CO.LTD.
  3. Heimatec tool holder for composite lathes 山田マシンツール
  4. 4 Sekisui Sleeve Holder 積水テクノ成型 新事業開発部
  5. 5 Stainless Steel Filter Holder - Standard Type アドバンテック東洋

Holder Product List

541～570 item / All 847 items

Displayed results
Short Nose Collet Holder Inch Specification

Short Nose Collet Holder Inch Specification

Introducing a small and short holder suitable for Swiss-type and knife-edge NC lathes!

We would like to introduce our "Short Nose Collet Holder Inch Specification." This short nose design minimizes the protrusion length, allowing for the use of nice mills even in machines with a narrow tooling zone. We also manufacture special shank dimensions. Please feel free to contact us if you have any requests. 【Lineup (Partial)】 ■SSH5/8-ECH7S-70 ■SSH3/4-ECH7S-40 ■SSH1-ECH7S-70 *For more details, please download the PDF or feel free to contact us.

  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Jacob's taper holder

Jacob's taper holder

Please use it instead of the keyless drill chuck (130-J6)!

We would like to introduce the "Jacob Taper Holder" that we handle. The compatible shank diameter is from 0.5 to 13φ. Please use it as a replacement for the keyless drill chuck (130-J6). Additionally, it will be used in combination with a collet, so please order them together. 【Specifications (partial)】 ■ Model: JT6-ECH13-80 ■ Compatible shank diameter: 0.5 to 13φ ■ Jacob Taper No.: JT6 *For more details, please download the PDF or feel free to contact us.

  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dice holder

Dice holder

Use in combination with the main unit of the tap holder SST□□-ECH7 or with machines equipped with a synchronization function!

We would like to introduce the "Die Holder" that we handle. This is a die holder for die outer diameters φ16 and φ20. It is designed for use in combination with the main body of the tap holder SST□□-ECH7 or machines equipped with a synchronization function. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ECH7-DH1 ■ECH7-DH2 *For more details, please download the PDF or feel free to contact us.

  • Dice
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Side Lock Holder Type A/S

Side Lock Holder Type A/S

Supporting processing with reliable performance! We also introduce custom-made products specifically for end mills.

We would like to introduce our "Side Lock Holder Type A/S". The general-purpose "Side Lock Holder Type A" supports machining with reliable performance. Additionally, the "Side Lock Holder Type S" is dedicated to end mills. Please use side lock end mills that are machined according to the ISO-3338 standard for flat cutting. 【Features】 <Side Lock Holder Type A> ■ General-purpose type ■ Supports machining with reliable performance <Side Lock Holder Type S> ■ Dedicated to end mills ■ Made to order *For more details, please download the PDF or feel free to contact us.

  • Machining Center
  • End Mills
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
25T collet holder

25T collet holder

Collet holder for small MC and DC, used in conjunction with Colette Prustad!

We would like to introduce our "25T Collet Holder." This collet holder is designed for various applications, including drilling, reaming, end milling, and synchronized tapping, and is suitable for small MC and DC machines. It can accommodate a highly versatile 16° taper collet. Additionally, we can manufacture special holders upon request. Please feel free to contact us. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications including drilling, reaming, end milling, and synchronized tapping ■ Compatible with a highly versatile 16° taper collet ■ Can be used in conjunction with collet pull studs ■ Special holders can also be manufactured *For more details, please download the PDF or feel free to contact us.

  • Machining Center
  • drill
  • End Mills
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dice Attachment "DA SS/DA SL" Dice Holder

Dice Attachment "DA SS/DA SL" Dice Holder

Achieve stable continuous processing! A die holder that enables the use of rolling dies, which are widely used in lathe processing, as well as solid dies!

The "DA SS/DA SL" is a newly designed die attachment aimed at improving chip discharge performance. By incorporating a chip discharge hole, it eliminates chip residue and enables stable continuous processing. We offer the "DA SS" die attachment for machining centers and the "DA SL" die attachment for lathes. 【Features of DA SS】 ■ Die holder that allows the use of rolling dies ■ Correction of feed errors and absorption of misalignment ■ Center through cool hole included ■ Chip discharge hole included 【Features of DA SL】 ■ Equipped with tension springs ■ One-sided notch for side lock ■ Chip discharge hole included ■ TYPE1 and TYPE2 feature a slim head design, allowing installation from the front and back sides of the sleeve *For more details, please refer to the PDF document or feel free to contact us.

  • サブ１.PNG
  • サブ２.PNG
  • サブ３.PNG
  • sub4.PNG
  • サブ５.PNG
  • サブ６.PNG
  • サブ７.PNG
  • サブ８.PNG
  • サブ９.PNG
  • Dice
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Understanding with Manga! "DA SS/DA SL" Edition Dice Holder

Understanding with Manga! "DA SS/DA SL" Edition Dice Holder

We have listed die holders suitable for high-quality machining of male threads!

This booklet introduces the features and characteristics of the die attachments for machining centers "DA SS" and for lathes "DA SL" in a manga format. We provide a clear explanation of the newly designed products specialized for machining centers and lathes, so please take a moment to read it. [Featured Products] ■ Die attachment for machining centers "DA SS" ■ Die attachment for lathes "DA SL" *For more details, please refer to the link below or feel free to contact us.

  • Dice
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small diameter collet holder

Small diameter collet holder

A series of rich shank sizes! Introducing essential precision machining products that pursue a slim profile!

This product is a slim-type collet holder that can chuck workpieces with an outer diameter of Φ12 and gripping diameters from Φ0.5 to Φ5.0. It supports a maximum of 40,000 RPM (varies by size) and features a design that considers balance, along with finishing processing of the outer diameter after heat treatment. Additionally, the asymmetric shape of the shank (HSK, SK, CAT) eliminates imbalance through counterbalancing. 【Features】 ■ An essential tool for micro-machining that pursues slimness ■ Supports a maximum of 40,000 RPM (varies by size) with a design that considers balance ■ Finishing processing of the outer diameter after heat treatment ■ Can chuck workpieces with an outer diameter of Φ12 and gripping diameters from Φ0.5 to Φ5.0 ■ Uses DIN standard taper collets *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Large diameter "R" zero holder 'CTZ・SA'

Large diameter "R" zero holder 'CTZ・SA'

Set the blade tip deviation as close to zero as possible! It is ideal for finishing work with a large diameter reamer!

This product is a large diameter "R" zero holder that eliminates blade runout to zero quickly, easily, and reliably using our unique four-point adjustment method. By simply turning the four adjustment screws with a wrench, you can adjust the runout precision to between 0 and 2 μm. By suppressing the runout of the cutting edge, variations in machining dimensions are eliminated, enabling high-precision finishing. 【Features】 ■ Stable hole diameter ■ Improved surface roughness ■ Increased tool life ■ Set the runout of the cutting edge to as close to "zero" as possible ■ A series of adjustment tasks can be completed in about 60 seconds *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of a rust-free holder.

Introduction of a rust-free holder.

NT Tool holders come with rust prevention treatment as standard.

The NT Tool holder does not rust without the need for rust prevention maintenance, and it does not negatively affect machining accuracy or the spindle. It prevents seizure and burning due to metal-to-metal wear with the spindle. It can be safely used with water-soluble cutting fluids. 【Features】 ■ Standard rust prevention treatment ■ Prevention of spindle damage ■ Prevention of tool life reduction ■ Prevention of deterioration in machining accuracy ■ Maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brother Industries "SPEEDIO" dedicated holder

Brother Industries "SPEEDIO" dedicated holder

The direction of the coolant nozzle is adjustable! We also have a wide variety of BT30 machine tool accessories available!

Introducing the dedicated holder for Brother Industries' lathe + machining center "SPEEDIO." In the "Turning Tool Series," we offer a lineup including the external diameter and end face processing tool "SBV-A," the end face processing tool "SBH-A," and the boring bar tool "TSB." We also have a wide range of M/C tooling for BT30. Please feel free to inquire separately. 【Turning Tool Series Lineup】 ■ External diameter and end face processing tool "SBV-A" ■ End face processing tool "SBH-A" ■ Boring bar tool "TSB" *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Colette-type floating holder 'FH-ST-HDC-A'

Colette-type floating holder 'FH-ST-HDC-A'

Ideal for high-precision reaming! Prevents galling and seizing due to metal-to-metal wear with the spindle!

The "FH-ST-HDC・A" is a collet-type floating holder that can grip reamers of various diameters by exchanging the collet. It features a tool droop prevention function and automatically corrects any misalignment of the pilot hole smoothly. It is compatible with both cornerless and cornered double-edged tools, so please feel free to contact us when needed. 【Features】 ■ Collet type ■ Adjustable float amount ■ Tool droop prevention function ■ Smooth automatic correction of pilot hole misalignment ■ Compatible with both cornerless and cornered double-edged tools ■ Center through coolant compatible *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Synchro Fit II "SMH"

Synchro Fit II "SMH"

Improvement of screw precision! The calculated expansion amount minimizes depth variation to the extreme!

The "Synchro Fit II SMH" reduces the thrust load on the tap to about 1/5, suppressing wear and breakage. Our unique elastic body structure alleviates the load during tapping, improving the tool's lifespan. Additionally, the elastic body integrated into the holder body deforms elastically in both the thrust and rotational directions during processing, significantly reducing the load acting on the tap. 【Features】 ■ Tap lifespan improved by 2 to 5 times (compared to our products) ■ Improved screw accuracy ■ Maintenance-free ■ Our unique integrated elastic body structure in the holder body ■ Calculated expansion and contraction minimizes depth variation to the utmost *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rising pin holder

Rising pin holder

Customized production tailored to your needs! Used in the die bonding process during semiconductor manufacturing.

The "Uplift Pin Holder" is used in the die bonding process during semiconductor manufacturing to pick up chips from the dicing tape. It can maintain needle verticality, with a needle height variation within ±25μ, and features a mechanism to prevent needle detachment. We can customize it according to your application, so please feel free to contact us. 【Features】 ■ Used to pick up chips from the dicing tape ■ Maintains needle verticality ■ Needle height variation within ±25μ ■ Prevents needle detachment *For more details, please refer to the related links or feel free to contact us.

  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Glass type filter holder for decompression filtration.

Glass type filter holder for decompression filtration.

It is used in various research and testing fields such as filtration of small samples, measurement of suspended solids (SS), and testing of microorganisms and fine particles.

【KGS-04】This is used for tests such as the insoluble particulate matter test for small-volume injectable preparations and single-dose packaged eye drops in the pharmacopoeia. It is used when the effective filtration area is small at 0.13 cm² and when the amount of particulate matter and sample volume are minimal. 【KG-25/KGS-25】This is used for microbiological tests, particulate tests, etc. It is used when the sample is small or when filtration with a small filtration area is required. 【KG-47/KGS-47・47-TF】This is used for microbiological tests, particulate tests, etc. The effective filtration area is designed so that the mesh of the membrane filter with grid lines (3.1 mm spaced grid) has 100 squares. KGS-47-TF is coated with PTFE on the bottom surface of the funnel to prevent the filter from sticking to the glass surface even when sterilized in an autoclave with the filter set in place. 【KG-90/KGS-90】This is used when filtering relatively large amounts of liquid.

  • Glassware and containers
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel syringe holder

Stainless steel syringe holder

It is suitable for low-capacity filtration. The lure fitting allows for easy attachment and detachment.

【Features】 ● The luer fitting design allows for easy attachment and detachment to a syringe (luer lock syringe). ● This small-capacity pressure holder is suitable for autoclave sterilization and is used for filtering small volumes such as eye drops and serum, as well as HPLC samples. ● The KS-25RA is used for removing ultra-fine particles contained in photoresist for applying silicone wafers and glass mask processors. *For more details, please download the PDF or feel free to contact us.

  • Stainless steel utensils and containers
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless steel line holder

Stainless steel line holder

It is used for filtering liquids with a relatively small volume. The 47mm size holder is equipped with a vent valve.

●KS-25F・47F: This is a filter holder designed to be set at the end of an ampoule filling device for injection solutions and the like. The KS-47F is equipped with a vent valve to remove residual air within the holder. Dedicated stands for 6 or 10 units can also be prepared according to the number of fillings. ●KS-47: This is a stainless steel filter holder that is effective for clarifying liquids with relatively low capacity, filtering sterilization, or gas clarification, and is excellent in pressure resistance, heat resistance, and durability. It is equipped with a vent valve to expel air in the piping that could adversely affect filtration. To ensure that air can be expelled from the holder regardless of whether it is used vertically or horizontally, the ceiling on the primary side is inclined. To facilitate easy use in the laboratory, the holder itself is designed with a groove for clamping.

  • filter
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Stainless Steel Filter Holder - Standard Type

Stainless Steel Filter Holder - Standard Type

This is a standard type of pressurized filter that can be used for both experimental and production purposes.

It is used for filtration sterilization and clarification of liquids and gases through pressure filtration. The support screen is coated with PTFE, allowing for autoclave sterilization while the filter is in place.

  • Filtration Equipment
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Holder for spray cans, suitable for 300 to 400 ml.

Holder for spray cans, suitable for 300 to 400 ml.

Spray can holder

If you have any questions regarding the introduction below, please feel free to contact us.

  • Other Auto Parts
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dice holder

Dice holder

You can use it for cutting male threads with a general-purpose lathe!

We offer a "Die Holder" that allows for straight and precise threading using dies. We have a slide type that allows you to choose from various arbors to match your machine, as well as an economical fixed type for situations where the sliding part is unnecessary, featuring automatic feed and tailstock sliding. 【Lineup】 ■ Slide Type ・DH50-J4S ■ Fixed Type ・DH50-J4 ・DH38-J6 *For more details, please download the PDF or feel free to contact us.

  • Company：GLOBE
  • Price：Other
  • Dice
  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CNC die holder

CNC die holder

It features a chip discharge design that ensures safety even with automatic machines.

We offer the "CNC Die Holder," which enables precision male thread processing using CNC lathes and machining centers. We have a tap shank type that allows for easy male thread cutting with a die, similar to tapping, and a straight shank type that can be connected to the turret or collet of a lathe, as well as to a milling chuck. 【Product Lineup】 ■ Tap Shank Type ・DH20-12.5 ・DH25-12.5 ・DH38-14 ・DH50-20 ■ Straight Shank Type ・DH38-25 ・DH50-32 *For more details, please download the PDF or feel free to contact us.

  • Company：GLOBE
  • Price：Other
  • Dice
  • Other cutting tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet-equipped LED light holder

Magnet-equipped LED light holder

Due to the magnet, it can be fixed to steel shelves and metal beams! It is also suitable for preventing loss.

The "LED Light Holder with Magnet" provides focused lighting for pinpoint illumination, making it suitable for hand lighting in precision machining environments and for display lighting. Additionally, the strong magnetic part has a maximum holding force of over 1kgf, and we offer the "LED Search Magnet," which has a flexible tip that can bend. Furthermore, we also have a "Rechargeable LED Light (Floodlight Type)" with a metal guard that is designed to withstand harsh usage environments. 【Features】 ■ Provides focused lighting for pinpoint illumination, suitable for hand lighting in precision machining environments and for display lighting. ■ Equipped with a magnet, allowing it to be fixed to steel shelves or metal beams, which helps prevent loss. ■ Battery-operated, making it usable in places without power outlets, in cars, or outdoors without worrying about power supply. *For more details, please download the PDF or feel free to contact us.

  • マグネット付LEDライトホルダー2.png
  • マグネット付LEDライトホルダー3.png
  • LED lighting
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Permanent magnet holder

Permanent magnet holder

It can be used for holding drawings, scales, and small parts!

We would like to introduce the "Permanent Magnet Holder" handled by Fujikawa Conductive Co., Ltd. This product can be widely applied for incorporation into press equipment and molds, as well as for workpiece holding. Additionally, versions with screw holes can be integrated into jigs. It can be used for applications such as holding drawings, scales, and small parts. 【Features】 ■ Widely applicable for incorporation into press equipment and molds, as well as for workpiece holding ■ Versions with screw holes can also be integrated into jigs *For more details, please download the PDF or feel free to contact us.

  • 永磁ホルダー2.png
  • 永磁ホルダー3.png
  • 永磁ホルダー4.png
  • 永磁ホルダーa.png
  • 永磁ホルダーb.png
  • 永磁ホルダー9.png
  • 永磁ホルダーc.png
  • 永磁ホルダー10.png
  • 永磁ホルダー.png
  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electromagnetic holder

Electromagnetic holder

A wide range of products, including automatic release electromagnetic holders and hybrid electromagnetic holders!

We would like to introduce the various "electromagnetic holders" handled by Fujikawa Denko Co., Ltd. With electrical control, it is possible to remotely operate the ON/OFF of the magnetic force, making it useful for automatic material feeding in presses, preventing deflection of shearing materials, and in various automation equipment and industrial robot gripping parts. We also handle types such as the "thin electromagnetic holder," aimed at space-saving and lightweight design. [Features] ■ Remote operation of magnetic force ON/OFF through electrical control ■ Space-saving and lightweight (thin type) *For more details, please download the PDF or feel free to contact us.

  • ?電磁ホルダー 画像2.png
  • ?電磁ホルダー 画像3.png
  • ?電磁ホルダー 画像4.png
  • ?電磁ホルダー 画像5.png
  • ?電磁ホルダー 画像6.png
  • ?電磁ホルダー 画像7.png
  • ?電磁ホルダー 画像8.png
  • ?電磁ホルダー 画像9.png
  • ?電磁ホルダー 画像10.png
  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drill holder

Drill holder

I will protect both you and the makeup materials from the tip of the cone!

The drill bits, such as metalworking drills and pilot drills, are fully stored inside the holder, making it safe and preventing them from piercing your feet. It is also reassuring as it does not scratch the cosmetic materials.

  • Other safety and hygiene products
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Laser processing metal keychain

Laser processing metal keychain

We will turn inspiration into form.

Why not turn your "inspiration" into "form"? How about customizing the existing equipment and tools to suit your needs? The professional team of "Magono Te Dot Com" will solve it for you.

  • Processing Contract
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brush Holder "B Series"

Brush Holder "B Series"

The brush size is large, making it suitable for high-capacity current supply! We offer three different sizes.

The "B Series" is a brush holder with a double brush design. Due to the large brush dimensions, it is suitable for high-capacity current supply. The material is BS, and we offer three types of current: 80A, 160A, and 240A. 【Features】 ■ Double brush design ■ Suitable for high-capacity current supply due to large brush dimensions ■ Material is BS *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
One-pass honing dedicated floating holder

One-pass honing dedicated floating holder

Correction of offset with a floating holder mechanism.

Takezawa Seiki has developed a floating holder that can correct minor misalignments between the pilot hole and the tool center. It responds well to small offsets and can align accurately with the pilot hole. Honing processes that always align with the pilot hole enable improved machining accuracy, suppression of quality variations, and prolong the tool's lifespan by preventing excessive force on the tool.

  • Grinding Machine
  • Milling machine
  • Chuck
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Holder Tag Holder

Holder Tag Holder

To facilitate the insertion of tags while preventing dust intrusion, the entrance E section is designed with a double structure and filled with air.

We started in December 1991 to provide high-quality wiring materials.

  • Other work tools
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LPC Detector Holder "PZ-121"

LPC Detector Holder "PZ-121"

Mainly used for reflective detectors! It is possible to fine-tune the position of the detector by turning the dial.

The "PZ-121" is a holder for the robust metal Q-series detectors. It allows for fine adjustment of the detector's position by turning the dial. It is primarily used for reflective detectors. Additionally, by changing the detector mounting part as an option, it can also be adapted for transmissive detectors. 【Features】 ■ Made of metal and robust ■ Allows for fine adjustment of the detector's position by turning the dial ■ Suitable for reflective detectors such as PS-261 and PS-270 *For more details, please refer to the PDF document or feel free to contact us.

  • 2021-04-20_10h56_37.png
  • Other machine elements
  • Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Holder

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.