Holder Product List and Ranking from 333 Manufacturers, Suppliers and Companies

Short Nose Collet Holder Double-Ended Type

For automatic lathes and similar machines! Front and back processing can be utilized with a single tool.

We would like to introduce our "Short Nose Collet Holder Double-Ended Type." It is suitable for Swiss-type and small automatic lathes. It can be used for both front and back processing with a single tool. Additionally, it can accommodate outer diameter sizes in both metric and inch specifications. Please feel free to contact us if you have any requests. 【Lineup (partial)】 ■SSH20-ECH7WS-33 ■SSH3/4-ECH7WS-33 ■SSH22-ECH10WM-38 ■SSH25-ECH10WM-50 ■SSH1-ECH10WM-70 *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coolant-through collet holder with piping screw.

Introducing the Alps Tool collet holder with mm/Inch specifications!

We would like to introduce our "Coolant Through Collet Holder with Pipe Thread." We offer two types: one suitable for turret lathes and the other suitable for automatic lathes. These are designed to be used in combination with coolant collets, so please order them together. Additionally, we can manufacture special shank dimensions. 【Product Lineup (partial)】 ■SSH20-ECH7OH-70 ■SSH25-ECH10OH-70 ■SSH32-ECH13OH-75 ■SSH3/4-ECH10OH-105 ■SSH1-ECH10OH-105 *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bowling bar holder

To secure the boring bit with a side lock, the tip position is stabilized!

We would like to introduce our "Boring Bar Holder." This is a boring sleeve for NC lathes. To secure the boring tool with a side lock, the cutting edge position is more stable compared to clamping with an AR collet. We can also manufacture special shank dimensions, so please feel free to contact us when you need assistance. 【Lineup】 ■SSH16-BSH4-70 ■SSH20-BSH4-70 ■SSH3/4-BSH4-70 ■SSH22-BSH4-100 ■SSH25-BSH4-100 *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Jacob's taper holder

Easy drill chucking! Introducing a holder for attaching a drill chuck.

We would like to introduce the "Jacob Taper Holder" that we handle. This is a holder for attaching a drill chuck. It allows for easy chucking of straight drills. Please feel free to contact us when you need assistance. 【Features】 ■ Easy chucking of straight drills ■ Holder for attaching a drill chuck *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Machining Center
drill
Chuck
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

15T collet holder

Small MC and DC collet holder! Compatible with highly versatile 16° taper collets.

We would like to introduce our "15T-Collet Holder." This collet holder is suitable for various applications, including drilling, reaming, end milling, and synchronized tapping, and is designed for small MC and DC machines. It can accommodate a versatile 16° taper collet. Please feel free to contact us when you need assistance. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications such as drilling, reaming, end milling, and synchronized tapping ■ Compatible with a highly versatile 16° taper collet *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Machining Center
drill
End Mills
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S20T Collet Holder

Special holders are also manufactured! Used for various applications such as drilling, reaming, end milling, and synchronized tapping.

We would like to introduce the "S20T Collet Holder" that we handle. This collet holder is designed for small MC and DC machines and can use a highly versatile 16° tapered collet. It can be used for various applications, including drilling, reaming, end milling, and synchronized tapping. Additionally, it can be used in conjunction with collets and pull studs, so please request them together. 【Features】 ■ Collet holder for small MC and DC machines ■ Usable for various applications such as drilling, reaming, end milling, and synchronized tapping ■ Can use a highly versatile 16° tapered collet ■ Used in conjunction with collets and pull studs ■ Custom holders can also be manufactured *For more details, please download the PDF or feel free to contact us.

Company：アルプスツール
Price：Other

Machining Center
drill
End Mills
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Support for the design, manufacturing, and construction of membrane gas holders.

We provide high-quality products utilizing the technology developed through membrane structures, in accordance with the Ministry of Economy, Trade and Industry guidelines!

By selecting materials, designing, manufacturing, and constructing in accordance with the guidelines related to membrane gas holders from the Ministry of Economy, Trade and Industry and Notification No. 666 from the Ministry of Land, Infrastructure, Transport and Tourism, we achieve high reliability, safety, and durability. **Single Membrane Gas Holder** - Uses membrane materials specifically for biogas. - Utilizes a membrane structure analysis system with a proven track record in large membrane structures to confirm the safety of the gas holder (including verification of internal pressure and membrane surface stress). - Calculates the stress generated at the gas holder's fixed points. **Double Membrane Gas Holder** **Outer Membrane** - Uses membrane materials with a weather resistance of 10 to 15 years. - Designed in accordance with Notification No. 666 from the Ministry of Land, Infrastructure, Transport and Tourism. - Achieves a structure capable of withstanding various environments (heavy snowfall, typhoons, etc.). **Inner Membrane** - Same as the above single membrane gas holder.

Company：協立工業
Price：Other

others
Holder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Die holder "DA SS" attachment for machining centers.

High-quality screw machining with suitable tooling! New design aimed at improving chip removal efficiency.

"DA SS" is a solid die-specific tooling equipped with functions to correct feed errors and absorb core misalignment. By incorporating a chip discharge hole, it eliminates leftover chips and enables stable continuous processing. When combined with NC tooling, it allows for easy male thread processing on complex workpieces. Additionally, it standardizes the cool hole to accommodate internal lubrication processing. 【Features】 ■ Achieves stable continuous processing ■ Usable with external lubrication systems ■ Allows for easy male thread processing on complex workpieces when combined with NC tooling ■ The processing oil passes through the cool hole located at the center of the die attachment, promoting chip discharge, lubrication, and cooling *For more details, please refer to the PDF document or feel free to contact us.

Company：Yamawa Manufacturing Co.,Ltd.
Price：Other

Dice
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-Sided Restraint BT Holder 'WBT-AHO·A'

Two-sided constraints provide excellent rigidity and suppress deflection! The repeatability of ATC attachment and detachment accuracy is also improved.

The "WBT-AHO・A" is a two-sided clamping BT holder compatible with standard BT shank pull studs. The lightweight shank section reduces the load on the spindle and decreases power consumption. In cases where thermal power generation is predominant, it contributes to the reduction of CO2 emissions. Additionally, the rust prevention treatment on the shank taper section and the suppression of fretting due to two-sided clamping enhance the holder's lifespan. 【Features】 ■ Compatible with standard BT shank pull studs ■ Shank taper section is rust-treated ■ NT's unique hollow structure provides energy-saving effects ■ Reduction in power consumption ■ Improved holder lifespan ■ Enhanced machining accuracy and tool lifespan *For more details, please refer to the PDF document or feel free to contact us.

Company：エヌティーツール
Price：Other

Other cutting tools
Holder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Decompression filtration filter holder 'KPP-90'

Lightweight and resistant to breakage! A filter holder suitable for soil analysis using reduced pressure filtration.

The "KPP-90" is a PP holder compatible with 90mm membrane filters used for preparing extraction solutions in soil analysis. It has lower elution compared to traditional glass holders (compared to our products). In particular, boron (B), which is an analysis item in soil analysis, has low elution. 【Features】 ■ Suitable for soil analysis ■ Resistant to breaking ■ Lightweight ■ PP type ■ φ90mm *For more details, please refer to the PDF document or feel free to contact us.

Company：アドバンテック東洋
Price：Other

filter
Other laboratory equipment and containers
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush Holder "V Series"

Brush holder suitable for medium capacity class current supply with an outer ring diameter of Φ75 to Φ170.

The "V Series" is a brush holder suitable for medium-capacity current supply. The material is BS, and "V-50" is suitable for use with diameters from Φ75 to Φ120, while "V-60" is suitable for diameters from Φ125 to Φ170, within a ring outer diameter of Φ75 to Φ170. Please use according to your application. 【Lineup】 ■V-50 ■V-60 *For more details, please refer to the PDF document or feel free to contact us.

Company：協栄電機
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush Holder "S Series"

Compact design! It can be used regardless of the outer diameter size of the slip ring.

The "S Series" is a brush holder designed with a compact structure that can be used regardless of the outer diameter of the slip ring. The standard pressure is 250g/CB and the material is BS. When used for signal purposes, please use it in combination with the BH0804-10/BH0804-12 brush holders and AG0804 (silver-based brush). 【Features】 ■ Compact design ■ Usable regardless of the outer diameter of the slip ring ■ Material is BS *For more details, please refer to the PDF document or feel free to contact us.

Company：協栄電機
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Brush Holder "M Series / Brush Cap"

The material is prepared with phenol and BS! A brush holder made from molded products.

The "M Series / Brush Cap" is a product made from molded parts, designed to be offered at a low price. The "M Series" is available in four sizes: 6.5×6, 7×6, and others. There are six types of "Brush Caps," with materials available in phenol and BS type. Please use them according to your application. 【M Series Lineup】 ■BHB-665 ■BHB-67 ■BHB-638 ■BHB-711 *For more details, please refer to the PDF document or feel free to contact us.

Company：協栄電機
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnet wrap holder

Fixed with a powerful magnet! A magnet wrap holder with a UniChrome finish that is resistant to rain.

The "Magnet Wrap Holder" can be used as a holder when loading wrap (stretch film) onto a forklift. It is fixed with a powerful magnet, making it compatible with both reach trucks and counterbalance trucks. This ensures that the wrap does not fall from the vehicle during operation, allowing for safe handling. We offer two sizes: 40mm and 65mm. 【Features】 ■ Firmly fixed with five powerful magnets with a holding force of 30kg ■ Finished with a zinc plating that is resistant to rain ■ Compatible with both reach trucks and counterbalance trucks ■ Safe operation without the wrap falling from the vehicle during driving ■ Available in two sizes: 40mm and 65mm *For more details, please refer to the PDF document or feel free to contact us.

Company：三栄商販
Price：Other

others
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Knife holder (shear cut)

A product that adopts a two-axis structure to achieve stable material cutting and reduce dust generation during cutting.

The German manufacturer Dienes has had expertise in the technology sector of the slitting industry since 1913. They are a global supplier of circular knives, straight knives, and knife holders. They also handle slitting systems (manual and fully automatic). *For more details, please refer to the catalog or feel free to contact us.*

Company：マックスリー・エンタプライズ
Price：100,000 yen-500,000 yen

Paper Converting Machinery
Rubber Processing Machine
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LPC Detector Holder "PZ-110"

Mainly for transparent detectors such as PS-400 and PS-711b! It is possible to finely adjust the position of the detector.

The "PZ-110" is a holder for the low-cost Q-series detectors made of resin. It allows for fine adjustment of the detector's position by turning the dial. It is mainly used with transmission-type detectors such as the PS-400 and PS-711b. 【Features】 ■ Low cost due to resin construction ■ Fine adjustment of the detector's position is possible by turning the dial ■ Suitable for sensors with a resin body, such as the PS-400 and PS-711b *For more details, please refer to the PDF document or feel free to contact us.

Company：三橋製作所
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LPC Sensor Holder "PZM-100/PZM-200"

Even with a double-sided angle bar, the holder can be attached and detached! There is no positional shift because it is fixed diagonally.

The "PZM-100/PZM-200" is a holder for G-series sensors that allows for fine adjustment of the detector's position by turning a dial. The holder can be attached and detached even when the square rod is held from both sides. It is mounted on a square rod of 25mm and is fixed diagonally to prevent any positional displacement. We offer the "PZM-100," which has a high degree of freedom in sensor positioning and is mainly used for reflective sensors, and the "PZM-200," which is primarily used for transmissive sensors. 【Features】 ■ For G-series sensors ■ Fine adjustment of the detector's position by turning a dial ■ Mounted on a 25mm square rod ■ Fixed diagonally to prevent positional displacement ■ Can be attached and detached even when the square rod is held from both sides *For more details, please refer to the PDF document or feel free to contact us.

Company：三橋製作所
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SHS Slim Holder 4-Piece Set and Individual Item NJI

SHS-150-SHS200 Slim Holder 4-Piece Set and Individual Item NJI

Slim Holder 4-Piece Set N.J.I. End mills transform into long end mills Slim Hard Shank SHS-150-4Z Slim Holder 4-Piece Set (Inner Diameter Φ6 to Φ12) SHS-150-6 Slim Holder 4-Piece Set Inner Diameter Φ6 Outer Diameter Φ16×150L Single Item SHS-150-8 Slim Holder 4-Piece Set Inner Diameter Φ8 Outer Diameter Φ20×150L Single Item SHS-150-10 Slim Holder 4-Piece Set Inner Diameter Φ10 Outer Diameter Φ20×150L Single Item SHS-150-12 Slim Holder 4-Piece Set Inner Diameter Φ12 Outer Diameter Φ25×150L Single Item SHS-200-4Z Slim Holder 4-Piece Set (Inner Diameter Φ6 to Φ12) SHS-200-6 Slim Holder 4-Piece Set Inner Diameter Φ6 Outer Diameter Φ16×200L Single Item SHS-200-8 Slim Holder 4-Piece Set Inner Diameter Φ8 Outer Diameter Φ20×200L Single Item SHS-200-10 Slim Holder 4-Piece Set Inner Diameter Φ10 Outer Diameter Φ20×200L Single Item

Company：ツールシステムツールエクスプレス
Price：Other

Other work tools
Holder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Type E Flat Knurling Holder KH1E20-25

Type E Knurling Holder for Flat Surface [KH1E20-25] Super Tool

Type E Knurling Holder (for flat surfaces) KH1E20 KH1E25 Super Tool Solves knurling processing up to the edge of stepped workpieces.

Company：ツールシステムツールエクスプレス
Price：Other

byte
Other cutting tools
Holder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Path Cutting Knurling Holder [For Ayame Pattern KH2CA08R～12R]

Small Path Cutting Knurling Holder [For Ayame KH2CA08R～12R] Super Tool

Cutting Knurling Holder 【Cutting Knurling Holder for Small Diameter Processing - For Ayame】 KH2CA08R～12R 【Features】 ● The cutting type knurling holder for small diameter processing exhibits powerful cutting performance for small diameter knurling using small diameter NC lathes, automatic lathes, and tabletop lathes. The productivity of processing is significantly improved compared to rolling types. (The improvement rate varies depending on conditions such as material, processing length, and machine used.) ● With the cutting type knurling, knurling can be performed on difficult-to-process materials (copper alloys, aluminum, stainless steel, resin, etc.). ● The increase in diameter due to knurling can be minimized. ● The holder head is designed to be compact yet robust, providing excellent versatility. ● The load during knurling is low, reducing the burden on the machine, which is beneficial for maintaining machine accuracy. Additionally, it can process small diameter materials and hollow materials. ● The use of special ball bearings for the rotation axis of the knurling tool ensures smooth rotation and prevents seizing due to clogging from cutting chips, extending the life of the tool and preventing tool breakage.

Company：ツールシステムツールエクスプレス
Price：Other

byte
cutter
Other cutting tools
Holder

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simple Inner Burring Holder T10 Type

A simple deburring holder that can be used with machines equipped with NC as well as robots and various dedicated machines.

The "T10 type" is a simple back burr removal holder that incorporates a 10mm extension mechanism in the axial direction. It allows for efficient back burr removal processing while constantly applying pressure to the cutting edge. It comes standard with three types of springs of varying strengths, which can be freely exchanged by the customer according to the material of the workpiece being processed. 【Features】 ■ Incorporates a 10mm extension mechanism only in the axial direction ■ Comes standard with three types of springs of varying strengths ■ Maximum allowable rotational speed of 10,000 min-1 ■ Allows adjustment of the cutting tool's pressing force according to the workpiece material *For more details, please refer to the PDF document or feel free to contact us.

Company：FINESYSTEM
Price：Other

Other work tools
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is deburring? A detailed explanation of the causes of burr formation, reasons for deburring, and methods.

Achieving skilled worker level deburring with FINESYSTEM's deburring robot cell.

Burrs refer to protrusions or excess parts that occur during the processes of metalworking or resin (plastic) processing, and they generally have irregular and sharp shapes. According to JIS standard JIS B 0051, they are defined as "residual material on a part resulting from machining or molding processes, located on the outside of the geometric shape at the edge of a corner." Burrs are formed during the process of cutting or shaping metal when the material stretches and tears. **Three Reasons to Remove Burrs:** - To prevent product failure and wear - To enhance assembly accuracy - To ensure product safety Traditionally, burr removal has been considered a task that is done manually. At FINESYSTEM, we are developing an automated burr removal system that achieves "skilled worker level burr removal" to address challenges such as high quality, labor hours, and worker shortages that have been identified in the burr removal process, as well as developing and manufacturing burr removal holders and tools. For more details, please check the related links or feel free to contact FINESYSTEM.

Company：FINESYSTEM
Price：Other

Other machine tools
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Torque Angle Head Holder QCT48-ASR16/20 Type

Approaching tight spaces for heavy-duty work! Powerful burr removal with high torque.

【FINESYSTEM Products: AF150 and AF110 Models, SFT48-HiSP-QC Model Exclusive】 - High Torque Air Float Attachments AF150 and AF110 Models - High Torque QC Motor Spindle SFT48-HiSP-QC Model This is a dedicated angle head holder that adopts our original standard QCT48 shank. ■ Enables deburring in narrow gaps of large workpieces! With robots equipped with large motor spindles, it was difficult to handle large workpieces such as aluminum die-cast, low-pressure casting, and gravity casting. However, by attaching the angle head holder, it is now possible to deburr in the narrow gaps of these large workpieces. ■ Nuts… Uses Hi-Q/ERB25 and Hi-Q/ERB32 nuts! ■ Collets… Adopts ER25 and ER32 collets that meet the world standard DIN6499/ISO15488. The gripping diameter for ASR16 is φ0.5 to φ16.0, and for ASR20 is φ0.5 to φ20.0. ■ Maximum rotation speed is 10,000 min-1 for ASR16 and 6,000 min-1 for ASR20. ■ High holding power is ensured by the unique dual-surface clamping QCT48 shank.

Company：FINESYSTEM
Price：Other

Other processing machines
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quick Change Rigid Holder QCT35-SR10 Type

Remove the thick parts such as the runner, gate, and membrane burrs from the workpiece before deburring!

■SFT35-HiSP-QC Type Dedicated Rigid Holder■ Adopts our original standard QCT35 shank. ● Removes thick parts such as gate, dam, and membrane burrs on the workpiece before deburring! This holder is designed to remove thick parts where deburring is difficult, such as gates, dams, and membrane burrs in cast products like aluminum die casts. By using cutting tools such as end mills, the processing efficiency of the pre-deburring operation is significantly improved. ● Uses reliable ER16 high-precision collet conforming to DIN/ISO standards! The collet that holds the cutting tool uses the ER16 collet conforming to the world standard DIN6499/ISO15488. In addition to the included φ6 collet, by using separately sold collets, it can accommodate cutting tools with shank diameters from φ0.5 to φ10. ● Maximum rotational speed of 20,000 min⁻¹ In accordance with the rotational speed of the SFT35-HiSP-QC type, the usable rotational speed ranges from 1,000 to 20,000 min⁻¹. ● Ensures high holding power with unique dual-surface clamping QCT35 shank The combination of a weak taper and a wide flange surface provides strong resistance to lateral forces, and the pulling force of the QCT35 shank is constantly maintained at 2 tons.

Company：FINESYSTEM
Price：Other

Other processing machines
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

QC Type Belt Sander Angle Holder Model QCT35-BA10-1

Compatible with commercially available 10×330mm belts │ For removing burrs and secondary burrs at pin corners!

■SFT35-HiSP-QC Type Dedicated Belt Sander Holder■ Adopts our original standard QCT35 shank. ● Highly effective for removing burrs and secondary burrs at pin corners! This holder is designed for the removal of burrs from machined parts, castings such as aluminum die casts, and burrs from plastic molded products. It is particularly effective in removing burrs and secondary burrs at corners that are difficult to reach with rotary tools. ● Compatible with commercially available 10×330mm sanding belts! The sanding belts that can be used are compatible with products from various sanding material manufacturers as long as they are of the commercially available 10×330mm size. This provides a wide range of belt options, allowing for optimal combinations based on application and material. ● Maximum rotational speed of 20,000 min⁻¹ In accordance with the rotational speed of the SFT35-HiSP-QC type, the usable rotational speed ranges from 1,000 to 20,000 min⁻¹. ● High holding power ensured by the unique dual-surface constrained QCT35 shank The combination of a weak taper and a wide flange surface provides strong resistance to lateral forces, with the pulling force of the QCT35 shank consistently holding at 2 tons.

Company：FINESYSTEM
Price：Other

Other processing machines
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Interior Goods Comprehensive Catalog

Interior goods, photo frames, albums, and more! A comprehensive catalog of interior accessories.

At Chagatani Sangyo Co., Ltd., we offer a wide variety of interior goods, including mobile phone holders, pen stands, antique metal ornaments, and glass float thermometers. [Featured Products (Partial Introduction)] ● CRYSTOCRAFT(TM) A collection item made with Swarovski crystals and metal ● Mobile Phone Holder ● Desktop Accessories ● Pitat Series A non-slip sponge sheet that securely holds smartphones and other items in place just by placing them on it. For more details, please download the catalog or contact us.

Company：茶谷産業東京支社
Price：Other

others
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Backup fixture for printing and mounting, RL holder

It gently supports the important substrate with optimal materials and appropriate elasticity.

This is a holder that prevents warping of the circuit board during printing and component mounting.

Company：プロセス・ラボ・ミクロン
Price：Other

Other packaging materials
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quick Change System "Coromant Capto"

Safety, security, and high precision that anyone can easily achieve! Significantly reduce equipment investment recovery.

The "Coromant Capto" is a quick change system primarily designed to reduce indirect time and costs associated with your machining processes. We offer a universal clamp holder that can accommodate any turret, along with a diverse range of product variations to support various machining needs. By adopting Coromant Capto, you can increase the time available for machining by 25%. Please feel free to contact us if you have any inquiries. 【Features】 ■ Universal clamp holders compatible with any turret ■ Average payback period of within 12 months (1 year) ■ A wide variety of product variations to accommodate various machining processes ■ Safe, reliable, and easy to use for anyone, achieving high precision effortlessly *For more details, please download the PDF or feel free to contact us.

Company：兼松KGK
Price：Other

Other machine elements
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Device: Double Tube Type Holder

This is a doctor holder equipped with a blade length automatic adjustment mechanism that adopts the principle of pressurization through an air tube.

It is possible to apply uniform pressure to the blade tip, allowing for a lower pressure setting across the entire blade. As a result, the replacement cycle for the consumable blade can be extended. Since the pressurization and release operations can be performed solely with the holder part, space-saving is achievable.

Company：サンレイ
Price：Other

Other machine tools
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrostatic discharge (ESD) protective product - ESD clear holder

This is a clear holder that maintains anti-static effects semi-permanently. It is a product that is highly effective in work processes where static electricity discharge and dust adhesion are problematic!

The "ESD Clear Holder" is a clear holder that maintains anti-static effects semi-permanently. In environments where static electricity is a concern, plastic can become a source of static electricity and cannot be used. Plastic products range from relatively large items like containers to small items like stationery. The "ESD Clear Holder" was developed as one of the stationery items that require static electricity measures. It maintains anti-static effects semi-permanently and exhibits these effects even under low humidity conditions. It also has excellent transparency. This product is highly effective in electronic device assembly and repair processes that handle static-sensitive electronic components, clean rooms where dust is a concern, and other work processes where static discharge and dust adhesion are problematic. For more details, please contact us or download the catalog.

Company：ナカタニ
Price：Other

Office supplies and stationery
Anti-static products
Other office supplies
Holder

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Holder Product List and Ranking from 333 Manufacturers, Suppliers and Companies | IPROS GMS

Holder Manufacturer, Suppliers and Company Rankings

Holder Product ranking