Tester Product List and Ranking from 316 Manufacturers, Suppliers and Companies

Cable Tester "NCT-100" Function Introduction 1

Miniaturization! Space-saving and capable of multi-pin testing! (Up to 1280 points)

<Problems> - The workbench is too small, and there isn't enough space for cable inspection. <Solution> In such cases... - It takes up little space! Size of the inspection equipment → Width 210mm × Depth 155mm Amazingly... about half the size of A4 copy paper! - It is slim! Height of the inspection equipment → Height 29mm - The main unit can be stacked on top of each other, allowing for a maximum of 10 units to be connected! * Its compact size means it doesn't take up much space, making it suitable for use on a desk... OK!

Company：日本電波本社/工場
Price：100,000 yen-500,000 yen

Harness
Harness
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerospace TY-CHECKER Type E Tester

Improving reliability in the aerospace field through high-speed, high-precision inspection.

In the aerospace industry, the safety and reliability of products are the top priorities. For circuit boards used in harsh environments, even the smallest defects cannot be overlooked. Poor conductivity or insulation failures can lead to serious accidents. The TY-CHECKER Type E tester reduces these risks through high-speed and high-precision inspections, contributing to improved product reliability. 【Application Scenarios】 * Inspection of electronic circuit boards for aircraft, spacecraft, and satellites * Quality control of electronic devices requiring high reliability * Quality assurance in the manufacturing process 【Benefits of Implementation】 * Reduced inspection time * Early detection of defective products * Improved product reliability * Cost reduction

Company：太洋テクノレックス本社　和歌山
Price：Other

Circuit Board Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TY-CHECKER Type E Tester for the Energy Industry

Choose by points! Improve energy efficiency with a high-speed, high-precision inspection tester.

In the energy industry, the reliability and safety of products are the top priorities. Particularly in power supply systems and renewable energy-related equipment, the quality of the circuit board is directly linked to the efficiency and stability of the system. Poor conductivity or insulation can lead to system shutdowns or efficiency declines, potentially resulting in significant losses. The TY-CHECKER Type E tester contributes to improving energy efficiency by quickly detecting these issues through high-speed and high-precision electrical testing. 【Usage Scenarios】 * Inspection of inverter circuit boards for solar power generation systems * Inspection of control circuit boards for battery storage systems * Inspection of circuit boards for power converters * Inspection of circuit boards for smart grid-related equipment 【Benefits of Implementation】 * Increased productivity due to reduced inspection time * Cost savings through early detection of defective products * Improved customer satisfaction due to enhanced product reliability * Maximization of energy efficiency through stable system operation

Company：太洋テクノレックス本社　和歌山
Price：Other

Circuit Board Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TY-CHECKER Type E Tester for Robots

Improving robot quality through high-speed, high-precision inspection.

In the robotics industry, precise inspection of circuit boards is essential to ensure product reliability. Particularly for circuit boards that control robot operations, issues such as poor conductivity or insulation failures can lead to malfunctions or breakdowns of the robots. Our electrical inspection device, the 'TY-CHECKER Type E' tester, guarantees the quality of circuit boards through high-speed and high-precision inspections, contributing to improved reliability of robots. [Usage Scenarios] - Inspection of robot control circuit boards - Inspection of various sensor circuit boards - Inspection of robot arm circuit boards [Benefits of Implementation] - Reduced inspection time - Early detection of defective products - Increased operational efficiency of robots

Company：太洋テクノレックス本社　和歌山
Price：Other

Circuit Board Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TY-CHECKER Type E Tester for IoT Devices

High-speed, high-precision electrical testing tester that supports the connectivity of IoT devices.

In the IoT device industry, accurate electrical testing of circuit boards is essential to ensure product reliability. Particularly in IoT devices equipped with various sensors and communication modules, electrical issues such as poor connections, shorts, and opens can lead to device malfunctions and interruptions in data communication. The TY-CHECKER Type E tester contributes to improving the quality of IoT devices through fast and high-precision testing. 【Usage Scenarios】 - Circuit board inspection in IoT device manufacturing - Connectivity testing of sensor modules and communication modules - Inspection of prototype circuit boards during product development 【Benefits of Implementation】 - Early detection of poor connections and electrical defects - Improvement in product quality and reliability - Increased production efficiency through reduced inspection time

Company：太洋テクノレックス本社　和歌山
Price：Other

Circuit Board Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Calibration of measuring instruments Clamp Tester 381 <FLUKE>

Significant reductions in labor costs and equipment costs are possible! Please consult us about specifying calibration points as well. For reducing calibration costs!

We offer "measuring instrument calibration services." You can also request the FLUKE clamp tester (model: 381) from us. Even if it is difficult to accommodate, we will act as the point of contact and collaborate with appropriate partner companies to provide a one-stop solution. We also accept urgent requests and pickup/delivery services, so please feel free to contact us if you have any requests. 【Overview】 ■ Product Name: Clamp Tester ■ Manufacturer: FLUKE ■ Model: 381 ■ Calibration Options: On-site calibration or pickup calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Calibration of measuring instruments Clamp Tester 3262 <HIOKI/Hioki Electric>

While reducing various costs, we provide accurate proofreading results quickly! Urgent responses are also possible.

We offer "measuring instrument calibration services." You can request calibration regardless of the manufacturer, field, or type of measuring instrument, reducing hassle and time. You can also request calibration for the HIOKI clamp tester (model: 3262) from us. This service significantly reduces the complicated processes and ordering costs associated with multiple manufacturers and suppliers, as well as the labor and equipment costs for in-house calibration. 【Overview】 ■ Product Name: Clamp Tester ■ Manufacturer: HIOKI ■ Model: 3262 ■ Calibration Options: On-site calibration or pickup calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring Instrument Calibration HiTester 3237 <HIOKI/Hioki Electric>

Requests can be made regardless of the manufacturer, field, or type of measuring instrument! Significantly reduce labor and equipment costs.

We offer "measuring instrument calibration services." We can also accommodate urgent requests and pickup/delivery services. On-site calibration or pickup calibration is available for HIOKI/Hioki's HiTester (model: 3237). For inquiries regarding calibration point specifications or any other questions, please feel free to contact us. 【Overview】 ■Product Name: HiTester ■Manufacturer: HIOKI/Hioki ■Model: 3237 ■Calibration Options: On-site calibration or pickup calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring Instrument Calibration - HiTester 3233 <HIOKI/Hioki Electric>

Express service and pickup/delivery services are also available! We provide comprehensive support for a wide range of measuring instruments across various fields.

We offer "measuring instrument calibration services." The HIOKI HiTester (model: 3233) can be calibrated on-site or picked up for calibration. We also provide express services and pick-up/delivery options. By handling a wide range of measuring instruments in-house, we can reduce various costs while providing accurate calibration results quickly. 【Overview】 ■ Product Name: HiTester ■ Manufacturer: HIOKI ■ Model: 3233 ■ Calibration Options: On-site calibration or pick-up calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring Instrument Calibration Power HiTester 3187 <HIOKI/Hioki Electric>

Business trips or pickup proofreading available! We also offer express service and pickup/delivery services.

We offer "measuring instrument calibration services." You can request calibration regardless of the manufacturer, field, or type of measuring instrument, reducing hassle and time. Calibration for the HIOKI Power HiTester (Model: 3187) is also available. For specifying calibration points or any other inquiries, please feel free to contact us. 【Overview】 ■Product Name: Power HiTester ■Manufacturer: HIOKI ■Model: 3187 ■Calibration Options: On-site calibration or pickup calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measurement Device Calibration Power HiTester 3186 <HIOKI/Hioki Electric>

Partial JCSS calibration is also possible! We provide accurate calibration results quickly while reducing various costs.

We offer "measuring instrument calibration services." Calibration is also available for the HIOKI Power HiTester (Model: 3186). We also provide express service and pickup/delivery services. Even if it is difficult to accommodate your request, our company will act as the point of contact and collaborate with suitable partner companies to provide a one-stop solution. 【Overview】 ■ Product Name: Power HiTester ■ Manufacturer: HIOKI ■ Model: 3186 ■ Calibration Options: On-site calibration or pickup calibration available *For more details, please refer to the PDF document or feel free to contact us.

Company：オーイーエム本社（大阪）、品川オフィス
Price：Other

Calibration and repair
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leak Clamp Tester "CL345" [Rental]

This is a clamp tester for measuring leakage current.

**Features** - Medium diameter (φ40mm) type capable of measuring leakage current - Manual range switching - Auto power-off function This feature prevents battery depletion due to forgetting to turn off the power, extending battery life. It automatically enters the auto power-off state approximately 10 minutes after the switch operation. - Data hold function This function fixes the measured value on the LCD display. Pressing the "DATA HOLD" switch once activates the hold state, retaining the data at that moment. The display does not change even if the input varies.

Company：ソーキ
Price：Other

Other electronic measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Techno Tester "RT-2000LD2" [Rental]

A techno tester that supports everything from research and development of exterior materials construction to management and verification of general construction. It can simultaneously measure load and displacement.

■ Easy and Reliable - The operation procedure is interactive with digital displays, so anyone can use it immediately. - With a low incidence of malfunctions and a battery-operated "measurement display" method, it is highly reliable and safe. ■ Safe and Convenient - Its compact and lightweight design allows for accurate measurements even in tight spaces or difficult conditions, enabling one person to operate it effectively. - Measurement values can be stored, and with the use of a printer, it provides additional safety and reliability, making reporting easy. ■ Data Accumulation Possible with Internal Memory Function Data can be accumulated in the measurement unit without needing to connect to a computer on-site. Graph test mode can store up to 99 entries (F01 to F99), and load/displacement load test mode can store up to 9,999 entries (P0001 to P9999). ■ Diverse Measurement Screen Displays (1) Graph Test Mode Instantly presents a simple load/displacement curve to the observers at the test site. (2) Load/Displacement Test Mode (3) Load Test Mode (4) Current Time Display ■ Backlight Function Even in dark environments such as tunnels or underground sites, the backlight function allows the numbers to be clearly visible to the naked eye. It also ensures safe recording with a digital camera.

Company：ソーキ
Price：Other

Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

テクノテスター『RJ-2』【レンタル】

外壁の劣化調査・施工品質の確認に、接着力・付着力の簡易型引張試験機。

■視認性の良いLED表示、暗い場所でも安心のバックライト付 ■落下事故防止に役立つU字しゃっくるフック付 ■ピークホールド機能により最大荷重値が表示されます。 ■ワンタッチで単位面積当たりの荷重値が表示されます。（N／mm2） ■電池交換のタイミングを逃さない7段階のバッテリー残量表示付き

Company：ソーキ
Price：Other

Flaw detection testing
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tech Tester "AT-10" [Rental]

Do not break the anchor. Do not destroy the concrete. Testing under tensile load conditions suitable for the purpose is possible.

■ It can be easily measured with anchors on ceilings and walls. ■ It can also accommodate anchors at the base. ■ Using the included tools, measurements of up to 100 kN (10.2 tf) can be taken. ■ The following measurements can be made: Since the load and displacement in 2 channels are always displayed, you can continuously monitor the load and displacement until the confirmation load during the test. - Load can be switched between kN and tf - Displacement is measured in mm - Maximum load can be switched to kN or tf - Displacement at maximum load is in mm

Company：ソーキ
Price：Other

Flaw detection testing
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tech Tester "RT-1000LD" [Rental]

It will be a simple tensile testing device for adhesion and bonding strength.

You can measure load and displacement simultaneously. By entering the area of the attachment used, you can display the load value per unit area. 【Features】 ■ Simultaneous measurement of load and displacement with digital display ■ Compact and lightweight design allows for easy testing in narrow spaces and difficult conditions.

Company：ソーキ
Price：Other

Flaw detection testing
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Techno Tester "RT-2000LD" [Rental]

You can check the tensile load of exterior tiles and other materials using the filler attachment.

The load unit can be easily switched between "kgt" and "kN" with one button, and it can measure up to a maximum load of "20.00kN (2040kgf)." 【Features】 ■ Safe and Convenient Its compact and lightweight design allows for reliable measurements even in narrow spaces or difficult working conditions by a single person. ■ Unit switching can be done with one button. ■ Auto Power Off Function This feature automatically turns off the display approximately 20 minutes after button operation to prevent battery drain. If the display turns off due to auto power off, you can restore it by turning the power switch to "off" and then back to "on." (When resuming from auto power off, the maximum value will be cleared.)

Company：ソーキ
Price：Other

Flaw detection testing
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Masterless Differential Pressure Air Leak Tester for Automobiles

No need for external comparison! Achieve stable measurements and time reduction with the built-in master.

In the automotive industry, the airtightness of various components such as engines and fuel cell parts affects product quality. Particularly for parts used in harsh environments, even minor leaks can lead to performance degradation or failure. The FLA-0200 achieves reliable airtight testing through stable differential pressure measurement with a built-in master tank. 【Application Scenarios】 - Airtight testing of engine components - Airtight testing of fuel cell components - Airtight testing of valves and piping 【Benefits of Implementation】 - Improved quality through stable measurements - Reduced inspection time through mastering measurements - Lower running costs (using air)

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Masterless Differential Pressure Air Leak Tester for Home Appliances

Waterproof testing for home appliances. Masterless air leak tester that does not require external comparison.

In the home appliance industry, waterproof testing is essential to ensure product reliability. Moisture intrusion can lead to product failure or performance degradation. Particularly for products intended for outdoor use or those designed for use around water, high waterproof performance is required. Our masterless differential pressure air leak tester utilizes a built-in master tank to measure the differential pressure with the workpiece, achieving stable leak testing. 【Application Scenarios】 - Waterproof testing for smartphones, smartwatches, etc. - Airtight testing for home appliances like washing machines and refrigerators - Waterproof performance evaluation for products used outdoors 【Benefits of Implementation】 - Improved product quality - Reduction of defective products - Increased customer satisfaction

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra Fine Leak Test System for Semiconductors

Detecting micro leaks in small electronic components! High-sensitivity leak testing.

In the semiconductor industry, detecting minute leaks is crucial to ensure the long-term reliability of products. Particularly in MEMS components and small electronic parts, it is essential to maintain the sealing integrity within the product and prevent external influences. Minute leaks can lead to performance degradation or failure of the product, potentially resulting in decreased yield. The MUH-0100 series employs the "capsule accumulation method," capable of measuring up to 4×10⁻¹⁵Pa·m³/s (He), to detect ultra-small helium leaks, thereby contributing to the improvement of semiconductor product quality. 【Application Scenarios】 - MEMS components such as angular velocity sensors and infrared image sensors - Small electronic components 【Benefits of Implementation】 - Improved product reliability - Enhanced yield - Strengthened quality control

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fukuda's leak test for automobiles

For airtight testing of automotive parts. We propose leak inspection and leak testing.

In the automotive industry, the airtightness of various components such as engines, fuel cell parts, valves, and piping affects the quality and safety of the products. Particularly for components used in harsh environments, even minor leaks can lead to performance degradation or failure. Fukuda's leak testing services offer leak inspection and testing tailored to your measurement and product environments. 【Application Scenarios】 - Airtightness inspection of engine components - Leak inspection of fuel cell parts - Leak inspection of valves and piping - Airtightness confirmation of various components 【Benefits of Implementation】 - Improvement in product quality - Enhanced safety - Reduction of defective products - Gaining customer trust

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerospace Leak Test by Fukuda

Leak testers and leak test-related products support reliability in the aerospace field.

In the aerospace industry, the safety and reliability of products are of utmost importance. Particularly in parts and systems used under advanced technology and harsh environments, even a tiny leak can lead to serious accidents. Fukuda's leak testing products are essential to meet the stringent quality standards in the aerospace field. 【Application Scenarios】 * Aircraft engine components * Spacecraft airtight systems * Rocket fuel tanks * Various sensors 【Benefits of Implementation】 * Improved product safety * Ensured reliability * Enhanced efficiency in quality management * Reduced risk of accidents

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【半導体向け】フクダのリークテスト

リークテスター・リークテスト関連製品で、微細漏洩の課題を解決します。

半導体業界では、製品の品質と信頼性を確保するために、微細な漏れを検出することが重要です。特に、高密度化が進む中で、微小な隙間からのガス漏れは、製品の性能低下や寿命短縮につながる可能性があります。フクダのリークテスト製品は、お客様の測定環境や製品環境に合わせて、漏れ検査・漏れ試験をご提案し、半導体製品の品質向上に貢献します。【活用シーン】・半導体製造工程における気密性検査・微細部品の漏れ検査・製品の品質管理【導入の効果】・製品の信頼性向上・不良品の削減・品質管理の効率化

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Air Leak Tester for Electronic Devices FLZ-0220

Condensing the necessary functions for air leak testing. Balancing operability and compactness.

In the electronics industry, airtightness testing of enclosures is crucial to ensure product quality and reliability. In particular, strict testing through air leak tests is essential to prevent failures caused by foreign object intrusion and moisture from the outside. The FLZ-0220 series is equipped with all the necessary functions for air leak testing, achieving improved operability through a touch panel and a compact size. 【Usage Scenarios】 - Enclosure testing for smartphones and tablet devices - Enclosure testing for various electronic components - Airtightness testing for keyless switches and other devices 【Benefits of Implementation】 - Improved product quality - Reduction of defective products - Shortened inspection time

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Air Leak Tester 0220 for Semiconductor Packages

A compact air leak tester equipped with the necessary functions for air leak testing.

In the semiconductor packaging industry, the airtightness of packages is crucial to ensure product reliability. Especially in environments exposed to temperature and humidity changes, even minor leaks can lead to performance degradation or failure of the product. The FLZ-0220 series is equipped with all the necessary functions for air leak testing and suppresses misjudgments caused by measurement environments through its high-performance correction features. The adoption of a touch panel also enhances operability, supporting quality control of semiconductor packages. 【Use Cases】 - Airtight inspection of semiconductor packages - Leak testing of various electronic components - Inspections in quality control departments 【Benefits of Implementation】 - Improved product reliability - Reduction of defective products - Shortened inspection time

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Air Leak Tester for Home Appliances FLZ-0220

Enhance waterproofing! Guarantee product quality with air leak testing.

In the manufacturing of home appliances, waterproofing is extremely important for ensuring product reliability and safety. Moisture intrusion can lead to product failure or electric shock accidents. Particularly for products intended for outdoor use or those designed for use around water, high waterproof performance is required. Our compact air leak tester evaluates the waterproof performance of products through air leak testing, supporting quality control. [Usage Scenarios] - Waterproof testing for smartphones, smartwatches, etc. - Air tightness testing for home appliances like washing machines and refrigerators - Waterproof performance evaluation for outdoor speakers, lighting fixtures, etc. [Benefits of Implementation] - Improvement in product quality and reliability - Cost reduction through the reduction of defective products - Increased customer satisfaction

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Air Leak Tester for Gas Equipment FLZ-0220

A compact-sized air leak tester equipped with the necessary functions for air leak testing.

In the gas appliance industry, leak testing is essential to ensure product safety. Gas leaks can lead to serious accidents, so high-precision leak detection is required. The FLZ-0220 series is equipped with all the necessary functions for air leak testing, contributing to safety assurance. 【Usage Scenarios】 - Manufacturing processes of gas stoves, water heaters, gas fan heaters, etc. - Maintenance and repair of gas appliances - Inspection of gas piping 【Benefits of Implementation】 - Reduces the risk of gas leaks and improves safety - Enhances product quality - Gains trust from customers

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Compact Air Leak Tester for Batteries FLZ-0220

A compact-sized leak tester equipped with the necessary functions for air leak testing.

In the battery industry, products with high sealing performance are required to ensure safety and performance. Battery leaks can lead to decreased product performance and accidents, making strict leak testing in the manufacturing process essential. The FLZ-0220 series evaluates the sealing performance of batteries through air leak testing, supporting quality control. 【Usage Scenarios】 - Quality inspection on battery manufacturing lines - Evaluation of battery sealing performance - Confirmation of product safety 【Benefits of Implementation】 - Early detection of leaking defective products - Improvement in product quality - Gaining customer trust

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Research Material] Global Market for Board In-Circuit Testers

Global Market for Board In-Circuit Testers: Fully Automatic, Semi-Automatic, Automotive, Energy, Medical, Aerospace, IoT, Others

This research report (Global Board In-Circuit Tester Market) investigates and analyzes the current status and outlook for the global board in-circuit tester market over the next five years. It includes information on the overview of the global board in-circuit tester market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the board in-circuit tester market include fully automatic and semi-automatic, while the segments by application cover automotive, energy, medical, aerospace, IoT, and others. The regional segments are divided into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa to calculate the market size of board in-circuit testers. It also includes the market share of major companies in the board in-circuit tester market, product and business overviews, and sales performance.

Company：マーケットリサーチセンター
Price：Other

Other services
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CT-4000 Battery Simulator Cycle Tester

CT-4000 Battery Testing System, high-precision 4-range tester, focusing on detail and authenticity.

With stable performance parameters, it ensures the accuracy and reliability of test data. At the same time, it adopts a modular design, with each unit having eight channels, and each channel can independently collect data. Each channel is individually programmable and supports editing of up to 254 lines. Multiple detection modes, multifunctional Cycle life testing, rate charge and discharge testing, pulse simulation testing, GITT testing, DCIR testing, dQ/dV differential capacity curves. Powerful programmable capabilities DBC configuration functions, constant current constant voltage charge and discharge testing, pulse width of 500ms, segmented recording. Rich auxiliary support for external devices Building a multidimensional detection environment Integrating external devices, such as auxiliary voltage, auxiliary temperature, and high and low temperature environmental test chambers, to conduct comprehensive real vehicle driving simulation tests, providing multidimensional and quantifiable detection support for battery mass production testing.

Company：新威技術
Price：Other

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tester Product List and Ranking from 316 Manufacturers, Suppliers and Companies | IPROS GMS

Tester Manufacturer, Suppliers and Company Rankings

Tester Product ranking