We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tester Product List and Ranking from 317 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

Tester Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. フクダ Tokyo//Testing, Analysis and Measurement
  2. TAKAYA Corporation Okayama//Industrial Electrical Equipment
  3. ナック Tokyo//Industrial Electrical Equipment
  4. 4 コスモ計器 Tokyo//Testing, Analysis and Measurement
  5. 5 ケーエヌエフ・ジャパン KNF JAPAN Tokyo//Machine elements and parts
Go to Company Ranking

Tester Product ranking

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. "Comprehensive Product Guide" "Technical Manual" ／ Fukuda Leak Test フクダ
  2. General-purpose differential pressure air leak tester | FLA-0201 series フクダ
  3. Masterless Differential Pressure Air Leak Tester | FLA-0200 series フクダ
  4. 4 Nodson DAGE Bond Tester (Joint Strength Testing Machine) オーヨー
  5. 5 Basic Knowledge of In-Circuit Testing: What is an In-Circuit Tester? TAKAYA Corporation

Tester Product List

121～135 item / All 1178 items

Displayed results
In-cavity pressure sensor, temperature sensor, verification function tester

In-cavity pressure sensor, temperature sensor, verification function tester

Check the insulation resistance and sensor sensitivity of the in-mold pressure sensor and temperature sensor that are already installed in the mold!!

This is a tester for checking the insulation resistance and sensor sensitivity of the built-in pressure sensor, surface temperature sensor, and pressure/temperature sensor that are already installed in the mold. This tester can also be used to confirm the input of the charge amplifier. • For on-site verification of the installed pressure and temperature sensors • User-friendly design with wireless connection test pins • Digital display of measurement results in pC/bar, pC/N, and °C • Capable of checking pressure sensors, temperature sensors, and pressure/temperature sensors • Charge generation function allows for testing of the charge amplifier, enabling testing of the entire measurement chain • Touch screen operation

  • Pressure

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Druck Wireless ADTS542/542F

Druck Wireless ADTS542/542F

Pitot static tester suitable for rapid testing of aircraft on the ramp.

A compact, lightweight, and cost-effective 2-channel portable pitot-static tester for line maintenance. The ADTS542F comes with the ADTS Touch hand terminal. Additionally, the ADTS542F is ideal for testing various aircraft and light airplanes with low pitot-static pressure, including helicopters and propeller planes. *For more details, please download the catalog or contact us. Please note that the personal information registered with Ipros may be shared with our authorized dealers, and they may contact you. Thank you for your understanding.

  • Pressure

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak Test Vacuum Differential Pressure Type 'Air Leak Tester'

Leak Test Vacuum Differential Pressure Type 'Air Leak Tester'

No need for 24-hour temperature control! We will arrange the work with bare hands, discarding common sense.

A stable leak testing production line is born from the specific leak standard values of the workpiece. 【Features】 Supports online measurement - Can ignore temperature conditions - No need for temperature management 24 hours a day - Not affected by the four seasons throughout the year - Can be conducted at the furnace outlet or in front of far-infrared - Workpieces can be handled bare-handed (Abandon the common belief that online testing has a high false positive rate...) ◇◆◆◇◆━━━━━━━━━━━━━━━━━━━━━━━━━ For more details, please download the catalog or feel free to contact us. ━━━━━━━━━━━━━━━━━━━━━━━━━◇◆◆◇◆

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bubble Checker

Bubble Checker

Easy, reliable, convenient, and inexpensive. Please keep it next to the leak tester.

Those who have seen the product will surely be convinced and make a purchase. This is likely because it is stable, reliable, and sold at a price close to that of a service in limited quantities. Please contact us first.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Sensitivity Differential Pressure Leak Tester

High Sensitivity Differential Pressure Leak Tester

We can offer low-cost solutions for vacuum differential pressure and positive pressure differential methods from water immersion testing. Visualization is achieved through bubble checking. We also accept equipment rentals.

The vacuum differential pressure method inherits the advantages of the positive pressure differential method while suppressing variations in measurement values caused by changes in workpiece temperature, room temperature, seasonal temperature fluctuations throughout the year, changes in the atmosphere during measurement, air flow, far-infrared radiation, and direct contact with hands, thereby eliminating misjudgments due to temperature and climate changes.

  • Company：センサ
  • Price：1 million yen-5 million yen
  • Leak Testing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manual airtight fixture

Manual airtight fixture

Gentle on the hands, lightweight, and simple jigs! We handle manual airtight jigs.

Sensor Co., Ltd. handles "manual airtight jigs" products. We offer a wide variety of jigs that are gentle on the hands, lightweight, and simple. Our company is engaged in design and manufacturing, development and prototyping, inspection, maintenance, and calibration management. We also participate in measures against global warming and environmental destruction through airtight testing. 【Features】 ■ Independent clamping method ■ Stress dispersion structure ■ Hand-friendly jigs ■ Lightweight jigs ■ Simple jigs *For more details, please refer to the PDF materials or feel free to contact us.

  • Other machine elements
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flying Probe Tester: APT-1340J *Evaluation tests currently accepted

Flying Probe Tester: APT-1340J *Evaluation tests currently accepted

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

We have completely revamped the platform compared to the conventional model, increasing the probe movement speed by up to 50% and dramatically improving contact position accuracy. With a new high-precision, wide-range measurement system that offers great flexibility and a groundbreaking 4-head 6-flying probe mechanism, we can significantly reduce inspection costs and enhance quality in the assembly process, regardless of substrate variety or production volume. ★You can bring your own substrates for evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch★ We can conduct a series of tests, including creating inspection programs, inspecting using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flying Probe Tester: APT-1400F-SL * Testing in progress

Flying Probe Tester: APT-1400F-SL * Testing in progress

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class industry level. (Supported board size for inspection: up to 985×610)

The APT-1340J maintains its basic performance while expanding the compatible board size to W635×D610mm. Additionally, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of 60mm and board weights of up to 10kg, making it suitable for inspecting boards used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★You can bring your boards to our demo room at our Okayama headquarters for evaluation tests★ We can conduct a series of tests including creating inspection programs, inspecting actual boards, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below. *For product information, please download the PDF or feel free to contact us.*

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dual Side Flying Probe Tester: APT-1600FD

Dual Side Flying Probe Tester: APT-1600FD

This is a flagship model that arranges probe heads on both the top and bottom, enabling simultaneous in-circuit testing of the front and back of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in its category. By using the flying probes on both the top and bottom simultaneously, a combination inspection with up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★ You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing ★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dual Side Flying Probe Tester APT-1600FD-SL

Dual Side Flying Probe Tester APT-1600FD-SL

The probe head is arranged above and below, allowing for simultaneous in-circuit testing of both sides of the substrate. (Supported substrate size for inspection: up to 985×610)

The simultaneous use of upper and lower flying probes enables a combination inspection of up to 6 probes, allowing for the inspection of components that can make contact at both points on the top and bottom of the substrate. This model boasts world-class standards in speed and positioning accuracy while expanding the compatible substrate size to W635×D610mm. Furthermore, by adding an optional split inspection function, it is capable of inspecting long substrates up to W985×D610mm. It can accommodate component heights of up to 60mm and substrate weights of up to 10kg, making it suitable for inspecting substrates used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★Evaluation tests can be conducted by bringing your substrates to the demo room at our Okayama headquarters★ The entire process from creating inspection programs, inspecting using actual substrates, to summarizing evaluation results can be tested in a single flow. If you are interested, please apply through the 'Contact Us' section below.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The fastest in-circuit test! What are the features of a flying probe tester?

The fastest in-circuit test! What are the features of a flying probe tester?

The Takaya APT series is a board inspection device capable of industry-leading ultra-fast in-circuit testing.

The Takaya APT series is a flying probe in-circuit tester that boasts overwhelming performance with the world's top market share, capable of detecting all defects on printed circuit boards through ultra-fast inspection. An in-circuit tester is a device that inspects the reliability of electrical connections between components and the board. By applying signals smaller than the operating current, it can identify defective areas and detect incorrect constants without damaging the components or the board. It is characterized by its ability to discover electrical defects that cannot be found through visual inspection (AOI), thereby enhancing quality assurance levels and making it easier to gain customer trust. The latest APT series has achieved a probe movement speed increase of up to 1.5 times compared to previous models, thanks to improvements in high-speed drive motors and communication control, enabling high-speed inspections with a minimum step of 0.02 seconds. This reduces inspection time by more than 30% compared to previous models, contributing to further reductions in inspection costs. Trial/testing consultations are also available. If you have any issues with inspecting printed circuit boards, please feel free to contact us. *For detailed information, please refer to the catalog.*

  • スクリーンショット 2022-07-19 161747.jpg
  • IPROS36579105724215571356.jpeg
  • IPROS51458029810883695520.jpeg
  • IPROS80998554253842089117.jpeg
  • スクリーンショット 2022-07-20 140225.jpg
  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Basic Knowledge of In-Circuit Testing: What is the Difference Between Fixture-Based and Flying Probe Testing?

Basic Knowledge of In-Circuit Testing: What is the Difference Between Fixture-Based and Flying Probe Testing?

*Free materials are currently available. A must-see for those who want to know the basics of in-circuit testers that they can't ask about now!

There are two probing methods for in-circuit testing (electrical inspection of printed circuit boards): fixture-based and flying probe. **Fixture-based** A test fixture with embedded contact probes makes contact with the test board, and all probes simultaneously touch designated test points on the board. In this state, inspections of each electronic component are performed while switching the measurement lines with relays. For the boards being inspected, it is necessary to create a program that combines each inspection and to manufacture a dedicated fixture, which poses challenges in terms of cost, speed, and storage space. **Flying Probe** Multiple arms holding probes perform probing at any point on the board. Although probe movement time is required, resulting in longer inspection times compared to fixture-based methods, there is no need for fixtures, and setup can be changed simply by swapping programs. This can lead to time and cost reductions when viewed from the overall process perspective. It is also suitable for inspecting boards in low-volume, high-variety production. The coordinates of the test points can be changed arbitrarily, making it easy to accommodate partial design changes to the board. It is also used for prototype board inspections and failure analysis.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Replacement of Fixture-type In-Circuit Tester

[Case Study] Replacement of Fixture-type In-Circuit Tester

No need for jig creation, reducing running costs by over 90%!

We would like to introduce a case where a flying probe tester was implemented as a replacement for a fixture-type (press-type) tester. *Challenges - In the case of high-density mounted boards, there were components that could not be inspected with a fixture-type tester due to the difficulty of creating fixtures in narrow areas. - For low-volume production, such as maintenance parts after mass production, the cost of fixtures became high, increasing the overall cost burden, including maintenance. - There was a need to secure storage space for fixtures, which also added management hassle. *Implementation Effects - Components with narrow pitch that could not be inspected with fixtures can now be tested, enhancing reliability. - The need for fixture production has been eliminated, and there are no longer any running costs associated with maintenance. - Storage space for fixtures is no longer required, eliminating management hassle. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Are you having trouble with automatic LED light emission inspection?

Are you having trouble with automatic LED light emission inspection?

Measure the emission color/brightness of LEDs quantitatively with a unique color sensor!! 【LED Color Test System】

Are you struggling with the labor involved in inspecting the LED's emission color and brightness? Takahashi's flying probe tester has an optional feature that allows for the measurement of LED emission color and brightness using a color sensor. We have examples of cases where visual inspections have been switched to inspections using the flying probe tester. Here are the actual benefits of implementation: 1: Zero burden on visual inspectors Directly looking at the LED's emission color can damage the operator's eyes, but switching to the flying probe tester can eliminate this burden. 2: Clarification of measurement standards Visual inspection can lead to variability in judgment criteria among inspectors. However, inspections using a color sensor have clear judgment criteria based on numerical comparisons, allowing for stable inspections. 3: No need for jig manufacturing costs In the case of LED inspections with the flying probe tester, there is no need to create dedicated jigs. We welcome inquiries for trials and tests. If you have any concerns, please feel free to contact us.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leave the introduction of flying probe testers to overseas markets to us!!

Leave the introduction of flying probe testers to overseas markets to us!!

Implemented in over 46 countries!! Takaya's tester is recognized worldwide.

Introducing Flying Probe Testers to overseas bases / Please leave the local setup to Takaya. Takaya has entered into a distributor agreement with Itochu Corporation for overseas sales, establishing sales/service bases in the United States, Europe, China, and Southeast Asia, with numerous sales achievements in over 46 countries. Please make use of Takaya's Flying Probe Testers, recognized not only in Japan but also by companies and industries around the world. *For more detailed information, please refer to the related link page below.

  • Circuit Board Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tester

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.