Digital Bolt Tester KP1
CAT.4 compliant digital volt tester
Automatic discrimination of AC/DC voltage and continuity to help prevent trip accidents.
- Company：三和電気計器 東京営業所/大阪営業所
- Price：10,000 yen-100,000 yen
Tester Product List and Ranking from 320 Manufacturers, Suppliers and Companies | IPROS GMS
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Tester Manufacturer, Suppliers and Company Rankings
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
- フクダ Tokyo//Testing, Analysis and Measurement
- ナック Tokyo//Industrial Electrical Equipment
- 太洋テクノレックス 本社 和歌山 Wakayama//Electronic Components and Semiconductors
- 4 TAKAYA Corporation Okayama//Industrial Electrical Equipment
- 5 コスモ計器 Tokyo//Testing, Analysis and Measurement
Tester Product ranking
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
- NEW Electric Inspection Device 'TY-CHECKER Type E' Tester 太洋テクノレックス 本社 和歌山
- "Comprehensive Product Guide" "Technical Manual" ／ Fukuda Leak Test フクダ
- Universal Bond Tester 4000Plus by Nordson 日精 本社
- 4 General-purpose differential pressure air leak tester | FLA-0201 series フクダ
- 5 Compact Air Leak Tester | FLZ-0220 series フクダ
Tester Product List
211～240 item / All 1254 items
Displayed results
Ball Tack Tester "QC-805/805A"
The strength of the tack is represented by the ball number based on the size of a steel ball that stops at a measurement section of 100mm!
We would like to introduce our ball tack tester for 1-point/4-point use, the 'QC-805/805A'. "Initial adhesive strength" refers to the ability to adhere to a substrate with light force in a short time. This product sets the inclination angle at 30 degrees, with a 100mm length of the ball's runway, allowing a steel ball to roll and stop at the measurement section of 100mm. The strength of the tack is represented by the size of the steel ball indicated by its number. 【Applicable Test Standards】 ■ JIS Z0237 ■ GB/T 4852 *For more details, please refer to the related links or feel free to contact us.
- Company：アイ・ティー・エス・ジャパン
- Price：Other
Ultrasonic Tester UST-20A
Ultrasonic tester capable of supplying small output voltage waveforms.
Ultrasonic oscillator capable of generating a wide frequency range (15k-150kHz) 【Features】 ○ Provides output voltage waveforms with minimal waveform distortion due to linear amplifier method ○ Can measure the voltage applied to the ultrasonic transducer, the current flowing, and the supplied power ○ Capable of measuring the admittance of the ultrasonic transducer ○ Controls constant voltage, constant current, and constant power to avoid damage to the ultrasonic transducer ○ Built-in frequency counter. Allows monitoring of the behavior of the ultrasonic transducer. *For other functions and details, please download the catalog.
- Company：日本シーディー 本社
- Price：Other
Leakage Current Tester "GLC-10000"
Equipped with 12 types of measurement networks! Compliant with various standards including IEC60601-1:2020.
The "GLC-10000" is a leakage current tester suitable for measuring leakage currents in general electrical equipment and medical devices. To ensure operator safety, leakage current tests are conducted under normal and single fault conditions. It complies with IEC, UL, and other international electrical safety standards that require leakage current measurement. 【Features】 ■ 7-inch touch panel ■ Capable of measuring leakage currents up to 50mA ■ Equipped with external terminals for measurement network expansion ■ Up to 30 setting parameters can be stored in the main unit ■ Up to 1000 measurement results can be stored in the main unit *For more details, please refer to the PDF materials or feel free to contact us.
- Company：テクシオ・テクノロジー
- Price：Other
Plastic welding small leak tester
A leak tester suitable for airtightness measurement of various shapes!
Achieve stable measurements and reliable OK/NG judgments, significantly reducing leak test time! A dedicated leak tester developed from technology for welding plastics. ■ Effective for all large and small three-dimensional workpieces, improving the reliability of the leak test process ■ Positive and negative pressure methods ■ Built-in electro-pneumatic regulator ■ Maximum pressure of 0.6 MPa ■ Differential pressure resolution of 0.001 Pa *For more details, please contact us.
- Company：コスモシステム
- Price：Other
Harness Tester "PTH-1/PTH-2"
We can also provide the necessary attachments! Universal harness tester PTH series.
"PTH-1/PTH-2" is a general-purpose harness tester that can be easily programmed with a computer. It has a sequential mode, with "PTH-1" capable of being set for 56 pins and "PTH-2" for 64 pins. We can also provide the necessary attachments, so please feel free to consult with us. 【Features】 ■ Easily programmable with a computer ■ Configurable for 56 pins and 64 pins ■ Sequential mode available *For more details, please refer to the PDF document or feel free to contact us.
- Company：ウイルダイフレックス
- Price：Other
Light RoTest FTBx-945 Telco OLTS
◆Completes 100% fully automatic two-wavelength bidirectional loss testing in under 5 seconds◆ Pass/fail judgment from measurements at both ends of the fiber is completed in a single operation.
◆ Navigation function for optimization ◆ Supports fiber measurements up to 200 km ● Telco Fully Automatic OLTS Module The FTBx-940/945 Telco OLTS can measure insertion loss (IL), optical return loss (ORL), and fiber length in under 5 seconds through fully automated bidirectional FasTesT(TM) analysis. It enables faster FTTx certification and field loss testing. ● OLTS Module for Telco, FTTx, and Field Testing Since its introduction in 1996, EXFO's patented FasTesT(TM) technology has revolutionized the industry by fully automating test sequences, significantly reducing testing and troubleshooting time in the field. It truly saves CAPEX/OPEX. Since its founding in 1985, EXFO has continued to lead the industry with highly innovative product development and reliable quality, making it a leading company in optical communication measurement instruments. It holds the number one market share in the optical product sector worldwide.
- Company：オプトロンサイエンス
- Price：Other
~100G Handheld Ethernet & Transport Tester
◆Supports DSn/PDH, ISDN, SONET/SDH, OTN, and Ethernet testing ◆Simplified and efficient BERT testing functionality
◆Various Ethernet tests compliant with RFC2544/EtherSAM and ITU-T Y.1564 ◆Supports IPv6 and MPLS testing ◆OTN testing compliant with ITU-T G.709, including FEC (forward error correction) This is a 400G Ethernet transport testing device. It can handle all situations from line installation to troubleshooting with a single unit.
- Company：オプトロンサイエンス
- Price：Other
~100G Ethernet & Transport Tester
◆10M-100G bidirectional TCP throughput test (multiple sessions allowed) ◆Dual/Quad port test (up to 100G)
◆Advanced multi-service techniques using iSAM based on ITU-T Y.1564 and RFC6349 ◆Supports DSn/PDH, ISDN, SONET/SDH, OTN, and up to 100G Ethernet testing ◆1.2 to 9.8 Gbit/s FTTA/C-RAN verification via Layer 2 CPRI protocol and unframed BER testing A handheld device packed with up to 100G Ethernet transport measurement capabilities, dedicated to Ethernet & transport testing Covers everything from line installation to troubleshooting, adaptable to any situation with a single unit.
- Company：オプトロンサイエンス
- Price：Other
MPO Rostesta Type-A/B/C with polarity diagnosis function
◆Quick simultaneous Type A/B/C polarity diagnosis and loss testing◆Simple operability using a touch panel◆Compact and lightweight
◆850nm Tx/Rx built-in It performs MPO Type A/B/C polarity diagnosis and insertion loss measurement simply and quickly. Measurement results can be stored internally for up to 300 data points.
- Company：オプトロンサイエンス
- Price：Other
Electrostatic discharge protection products Shoes & Wrist Strap Tester 747
It is possible to manage the measurement and judgment of list strap testers and electrostatic discharge shoes.
The electrostatic discharge prevention product, the old Sumitomo 3M (formerly 3M Japan, now DESCO) Shoe & Wrist Strap Tester 747, can manage the measurement and judgment of both wrist straps and electrostatic discharge prevention shoes with a single device. It measures and judges the resistance value of the wrist strap. The upper limit judgment setting value can be changed, and the measured actual value is displayed on the LCD. It measures and judges the resistance values of electrostatic discharge prevention shoes, socks, and the human body. For more details, please contact us or refer to the catalog.
- Company：原貿易
- Price：Other
Conductive Voltage Tester (0-10Ω, 0-600V AC/DC)
A conductive continuity tester that allows for easy verification of the continuity of electrical circuits with a lit lamp!
We would like to introduce our "Conductive Tester (0-10Ω, 0-600V AC/DC)." This product features a probe that operates at 3V with a maximum of 270mA. The low-voltage lamp tests non-powered circuits, allowing for easy verification of electrical circuit continuity through the illuminated lamp. Additionally, the high-voltage lamp tests circuits that are live. 【Features】 ■ Range: 0-600 V or 1-10 Ω ■ Probe: 3V at a maximum of 270mA ■ Battery not included ■ The low-voltage lamp tests non-powered circuits ■ The illuminated lamp allows for easy verification of electrical circuit continuity *For more details, please refer to the related link page or feel free to contact us.
- Company：原貿易
- Price：Other
Conductive tester (0-50Ω, with sound)
A conductive current tester that allows for easy verification of the continuity of an electrical circuit with a lit lamp!
Introducing our "Conductive Tester (0-50Ω, with sound)" that we handle. This product allows you to easily check the continuity of electrical circuits with a loud sound at 2kHz that is easily audible. It comes with two AA batteries and is made in the USA with high quality. 【Features】 ■ Range: 0-50 Ω ■ Probe: 3V at maximum 270mA ■ Includes two AA batteries ■ Easily check the continuity of electrical circuits with a loud sound at 2kHz ■ Made in the USA, high quality *For more details, please refer to the related link page or feel free to contact us.
- Company：原貿易
- Price：Other
Tester "19350"
Reliable resistance testing! You can test without leaving the workplace, so productivity does not decrease.
The product "19350" is capable of testing all circuits, including wrist straps, cords, and contact with the skin. It connects to the grounding point of the equipment while the plug is inserted. It can be installed quickly and easily, grounding both the wrist strap and the workbench mat. Additionally, workers can perform tests without leaving the work area, ensuring productivity is not compromised. Please consider it as a convenient means for maintaining performance and reducing calibration costs. 【Features】 ■ Quick and easy installation ■ Can be used as a common grounding point on the workbench surface ■ No need for additional ground cords ■ Testing can be performed during normal work operations ■ Calibrated according to NIST-approved standards and procedures *For more details, please refer to the related link page or feel free to contact us.
- Company：原貿易
- Price：Other
Low Resistance Tester '19249'
Verification of grounding condition consistency! Long-lasting battery allows for over 10,000 tests (2 seconds each).
The "19249" is a low-resistance tester that measures the grounding resistance between banana jacks and other devices. With easy-to-understand displays and alarms for simple operation, you can check whether the grounded conductor is within the test range by simply pressing one button. It has a long-lasting battery that allows for over ten thousand tests (2 seconds each). Its lightweight and compact design makes it portable enough to fit in a chest pocket. 【Features】 ■ Measures grounding resistance between banana jacks and other devices ■ Easy operation with clear displays and alarms ■ High testing accuracy at very low resistances compared to standard multimeters ■ Lightweight and compact design ■ Capable of over ten thousand tests (2 seconds each) *For more details, please refer to the related link page or feel free to contact us.
- Company：原貿易
- Price：Other
Relay Tester GR-ELB Tester
Relay Tester GR-ELB Tester
This is a relay tester that allows for simple operation of performance and operation tests for leakage circuit breakers (ELB), leakage alarm devices, and ground fault overcurrent relays (GR). It is compactly equipped with the necessary ammeter and timer components for testing within a small and lightweight structure.
- Company：ムサシインテック
- Price：Other
Multi Relay Tester IP-R1500
Compact and lightweight as it is, now with added OVR and UVR.
Advanced multi-relay tester that gives you an edge over your rivals.
- Company：ムサシインテック
- Price：Other
GR・DGR Relay Tester GCR-mini
Possible until the DGR phase test.
Thoroughly miniaturized GR/DGR relay tester.
- Company：ムサシインテック
- Price：Other
Protection Relay Tester OCR/GCR Relay Tester ORT-50SV
Protection Relay Tester Multi Relay Tester
Musashi Intec, as a top manufacturer of relay testers, is actively promoting the development of new products and product renewals to meet customer needs by utilizing the latest electronic technologies. The ORT-50SV achieves a compact and lightweight design that has never been seen in previous testers, while also significantly enhancing testing output performance. ● The main unit weighs less than 18kg, achieving lightweight design ● High performance with a 1kVA generator outputting a test current of 50A ● Supports interlocking tests with current-limiting circuit breakers and current relays ● In addition to the basic performance of the ORT-50S, it also supports under/over voltage and ground direction relays.
- Company：ムサシインテック
- Price：100,000 yen-500,000 yen
Leakage Current Circuit Breaker Tester KEW5410
KYORITSU: Ideal for judging the quality of leakage circuit breakers!
**Features** - **Easy Operation (Remote Measurement)** With the remote measurement function, you can automatically measure just by connecting the measurement code to the terminal. The circuit voltage is displayed first, and after one second, the measurement of operating time or sensitivity current begins. - **Automatic Voltage Detection** There is no need to switch voltages as it automatically detects 100V, 200V, and 400V circuits. - **Operating Time Measurement** It is possible to conduct a rated non-operating current test in the ×1/2 range and measure operating time in the ×1 and ×5 ranges. - **Sensitivity Current Measurement** The test current is automatically increased, and the current value at the point of trip is displayed. - **Automatic Contact Voltage Detection** When measuring using ground, to prevent electric shock due to poor grounding, during leakage breaker tests (when test current is flowing), it automatically detects the voltage of the grounding electrode or protective conductor and stops the measurement at AC50V, issuing a warning. - **Dust and Splash Proof** Complies with dust and splash proof standards IEC 60529 (IP54). Measurements can be taken even in bad weather. - **Backlight** The backlight allows for reading measurements in dark places.
- Company：共立電気計器
- Price：Other
Outlet Tester KEW4505・4505BT
KYORITSU: Instant polarity determination of the outlet is possible (4500BT: Equipped with Bluetooth)
**Features** - In addition to TT grounding, measurement of TN grounding is also possible when used with a dedicated injector. - Simple operation: just plug it into an outlet and press the measurement button. - Can determine miswiring between N-E (Neutral and Earth) while live. - Normal/miswired conditions are indicated by LED (green/red) lamps and a buzzer. - Equipped with Bluetooth. - Further enhanced functionality when used with a dedicated injector (sold separately): - Measurement is possible even with TN grounding. - Can measure ground voltage up to 20V. - Can measure even with low ground resistance. - Does not trip a 15mA leakage circuit breaker (test current below 1μA). *The dedicated injector is scheduled for release in Spring 2020 (KEW8341・KEW8342).*
- Company：共立電気計器
- Price：Other
LAN Cable Tester "KEW 8550"
Easily and clearly confirm the cables needed for network construction!
The "KEW 8550" is a LAN cable tester capable of measuring cable lengths up to 255 meters. By setting correction for each cable being measured, it is possible to improve the accuracy of cable length measurement. Additionally, it features a backlight that automatically turns on when powered on. Please feel free to contact us if you have any inquiries. 【Features】 ■ Wiremap function that allows you to check wiring status with the press of a button ■ Miswiring check function that can also detect split pairs ■ Capable of measuring cable length ■ Equipped with a backlight that automatically turns on when powered on ■ Can probe up to 8 cables simultaneously (optional use) *For more details, please download the PDF or feel free to contact us.
- Company：共立電気計器
- Price：Other
Solution Stability Evaluation Device Stability Tester ST-1
Rapid evaluation of the stability of dispersed system materials.
For the evaluation of phenomena such as sedimentation, precipitation, flotation, aggregation, coalescence, and creaming! You can assess the stability of dispersed solutions without dilution or centrifugation. Quantitative evaluation can be performed in a short time, and up to 6 samples can be measured simultaneously.
- Company：英弘精機 物性・分析機器事業部
- Price：Other
Test facility in Tsukishima R&D center
We will propose appropriate model selection and equipment specifications. Testing will be conducted in the presence of the customer.
When considering the selection of models for the introduction of new equipment, we believe there are many aspects that need to be confirmed, such as whether the required capacity is suitable and if the desired performance can truly be achieved. Our company has numerous testing facilities to verify these aspects. If you request testing, we will conduct the tests in your presence, gather the necessary data for scale-up, and based on the results, we will propose appropriate model selection and equipment specifications. 【Features】 ■ Possession of various testing facilities ■ Conducting tests in the presence of customers ■ Gathering necessary data for scale-up ■ Proposing appropriate model selection and equipment specifications based on results *For more details, please refer to the PDF document or feel free to contact us.
- Company：Tsukishima Kikai Co., Ltd.
- Price：Other
Handy air leak tester
Handy air leak tester
Lightweight and compact! Smaller than A4 size! Instant leak detection! Low price and easy operation!
- Company：トキオエンジニアリング
- Price：Other
Burst Tester Model BT-200
Injecting a needle into food containers and testing the burst strength of the seal.
A burst tester that allows for easy testing of the burst strength of containers according to JIS Z 0238-8.
- Company：今田製作所
- Price：Other
LED Fiber Optic Tester 'LL8-LED(-500)'
Fixture compatible with samples! LED fiber optic tester capable of high correlation measurements with integrating spheres.
The "LL8-LED(-500)" allows for highly correlated measurements with an integrating sphere by installing multiple optical fibers on a hemisphere. Due to the distance between the LED light-emitting surface and the measurement unit, high workability is achieved, and installation to an automatic transport system is also easy. It features OK and NG judgment functions, making it suitable for use in processes. It also has measurement data storage and reading functions, supporting the development and evaluation of LEDs with comprehensive software. 【Features】 ■ Enables highly correlated measurements with an integrating sphere ■ Easy installation to an automatic transport system ■ Supports LED development and evaluation with comprehensive software ■ Hemisphere sizes can accommodate small to large, from 0.1m to several meters ■ Capable of evaluating all-lit images and more *For more details, please refer to the PDF document or feel free to contact us.
- Company：システムロード
- Price：Other
Optical Tester (High-Speed Conduction Inspection Device for Optical Wiring Waveguides)
Optical transmission inspection device for mass production testing of multi-channel polymer optical waveguides for optical wiring boards.
The "Optical Tester (High-Speed Continuity Inspection Device for Optical Wiring Waveguides)" is a device that inspects the continuity of multi-channel polymer optical waveguides for optical wiring substrates with high speed and precision. With the measurement light bulk irradiation method and high-speed continuity inspection software, it is possible to measure the optical continuity of multiple channels of optical waveguides simultaneously and rapidly. As a result, high-speed optical continuity testing in the mass production stage of optical wiring waveguides, which could not be achieved with conventional fiber alignment loss measurement methods, has become possible. 【Features】 ■ Non-alignment and high-speed measurement using the measurement light bulk excitation method ■ High-speed, high-precision, and high-reproducibility continuity and relative loss measurements compatible with mass production inspection, enabled by the measurement light bulk excitation light source unit, high N.A. detection optical system, and high-speed image processing algorithm, which extracts, processes, and determines only the waveguide propagation signals of the optical waveguides using dedicated software ■ Support for defocus measurement mode and automation of measurements through combination with an electric stage *For more details, please download the PDF or feel free to contact us.
- Company：シナジーオプトシステムズ
- Price：Other
