coating Product List and Ranking from 569 Manufacturers, Suppliers and Companies

Conformal coating agent for substrate migration prevention

High-performance coating agent for electronic substrates, non-hazardous, free of regulated substances, air-dry at room temperature (no drying process required).

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from lithium battery electrolyte leakage ■ Malfunctions and corrosion caused by leaks due to condensation in high humidity ■ No need for management as hazardous materials or organic solvents ■ Exempt from PFAS regulatory substances *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

FloroSurf FG-5095W is an environmentally friendly water-soluble release agent with excellent release properties. Please try it when conventional release agents do not work.

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for carbon fiber CFRP, excellent release properties.

Overwhelming continuous release properties in carbon fiber CFRP molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. Samples available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Signal stabilization with coating agents for circuit boards for communication.

Protects the circuit board of communication equipment and improves signal stability! Moisture-proof, insulation, and acid resistance.

In the telecommunications industry, the reliability of electronic devices is extremely important, and the stability of signals is essential. Equipment used outdoors or in harsh environments can deteriorate due to moisture, corrosive substances, and temperature changes, potentially leading to signal disruption and equipment failure. Our coating agents for circuit boards address these issues through moisture resistance, insulation, and acid resistance, supporting stable signal transmission. 【Usage Scenarios】 - Base stations - Communication cable connections - Wireless communication devices - IoT devices 【Benefits of Implementation】 - Signal stabilization - Extended equipment lifespan - Reduced maintenance costs - Lower risk of failure

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating agent for substrates for solar power generation

Protects the substrate of the solar power generation system and contributes to maintaining long-term efficiency.

In the solar power generation industry, the long-term stable operation of systems and the maintenance of power generation efficiency are crucial. Solar power generation systems installed in outdoor environments are susceptible to influences such as humidity, temperature changes, ultraviolet rays, and salt damage, which can lead to substrate corrosion and insulation failures, potentially resulting in decreased power generation efficiency and system failures. Our coating agents for substrates address these challenges and contribute to the long-term stable operation and efficiency maintenance of the systems by protecting the substrates. 【Usage Scenarios】 - Substrates of solar power generation systems - Outdoor electronic devices - Use in humid environments 【Benefits of Implementation】 - Prevention of substrate corrosion - Improvement of insulation properties - Long-term system stability - Maintenance of power generation efficiency

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Solving the challenges of rubber molding sites! Improving productivity with overwhelming release properties.

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for electronic components

Ideal for precision molding! Continuous release, non-silicone, air-dry in 5 minutes at room temperature.

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Please try this when conventional release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, non-flammable, no explosion-proof equipment required.

Four times the moisture-proof performance of urethane and acrylic! Non-flammable, no need for explosion-proof equipment or hazardous material storage. *Samples available.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 - Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use without fire safety regulations or the need for explosion-proof equipment or hazardous material storage. - Exempt from the Organic Law under the Industrial Safety and Health Act, reducing management items. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes, no heating required. - Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS, etc.). *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate protection coating agent, significant reduction in management, non-flammable, solvent-free.

Moisture-proof coating agent for room temperature drying type printed circuit boards (conformal coating agent) considering safety, workplace environment, and performance.

The electronic substrate protective coating agent (conformal coating) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Field】 ■ Non-flammable and low-odor liquid, allowing for safe use → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture-proof coating agent, significant reduction in management items, non-flammable, solvent-free.

Moisture-proof coating agent for room temperature drying type printed circuit boards (conformal coating agent) that takes into account safety, workplace environment, and performance.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, thus exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Site】 ■ Safe to use as it is a non-flammable, low-odor liquid → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Completes drying at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating agent, high insulation properties, high moisture resistance, high safety.

Insulation coating agent. High insulation properties that strongly prevent leaks. Room temperature drying type. SDGs compliant (non-organic solvent + non-hazardous + low odor).

The insulating coating agent (conformal coating) "Fluorosurf FG-3650 series" is suitable for insulating protection of electronic components, waterproofing, leak prevention, and moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law regulations. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as high insulation, high moisture resistance, saltwater resistance, water resistance, acid resistance, high resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. ■ Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane or acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating agent with over 4 times high performance, non-flammable and safe.

More than four times the moisture resistance and high insulation compared to urethane and acrylic. Non-hazardous and non-organic solvents, no need for explosion-proof equipment or management. Just room temperature drying is sufficient!

The insulation coating agent, FluoroSurf FG-3650 series, is ideal for insulating protection of electronic components, as well as waterproof and moisture-proof coatings. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It demonstrates insulation protection functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the manufacturing environment】 ■ Non-flammable and free from fire safety regulations → No need for explosion-proof equipment, hazardous material storage, or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy coating

Handles, stays, covers, etc.! Particularly used for long-term outdoor corrosion-resistant applications.

"Epoxy coating" has excellent adhesion to metals, as well as outstanding chemical resistance, electrical insulation, and water resistance. The film thickness is 300 to 500 μm. There are no abnormalities in water resistance after 500 hours at 40°C (JIS K5400). It is particularly used for long-term outdoor corrosion resistance applications and is suitable for covers, showcases, valve and pump parts, and decorative purposes. 【Characteristics】 ■ Water resistance: No abnormalities after 500 hours at 40°C (JIS K5400) ■ Salt spray test: No abnormalities after 500 hours at 35°C in 5% saltwater ■ Adhesion: 100/100 in the tape test method (JIS K5400) ■ Acid resistance: No abnormalities after 240 hours at 20°C in 5% sulfuric acid ■ Alkali resistance: No abnormalities after 240 hours at 20°C in 5% caustic soda *For more details, please refer to the PDF document or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Polyester-Epoxy Polyester Coating

The coating has excellent smoothness and is suitable for a high-quality decorative finish! Gloss adjustment is possible, and there is also an antibacterial type available.

"Polyester-Epoxy Polyester Coating" is a thermosetting polyester resin-based powder coating. It excels in leveling properties in thin films and is suitable for exterior decorative finishes. Gloss levels can be adjusted from semi-gloss to glossy without compromising the smoothness of the coating, and an antibacterial type is also available. 【Features】 ■ The coating has excellent smoothness, making it suitable for high-end decorative finishes. ■ A film thickness of 40 to 100 μm can be freely achieved with a single coat. ■ Gloss levels can be adjusted from semi-gloss to glossy without compromising the smoothness of the coating. ■ An antibacterial type is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating

Softness equivalent to "tires"! We also have extensive experience in construction for plating jigs and plating treatment racks.

The "Insulating Coating" boasts high electrical insulation properties, providing insulation effects for electrical equipment, construction sites, and facilities. We also have extensive experience in application for plating jigs and plating treatment racks. The application can be performed at relatively low temperatures, and the curing (masking) treatment is also relatively easy for this coating. We propose coatings tailored to customer needs, such as "wanting to suppress electrical conduction to metal substrates (workpieces)" or "wanting to prevent electric shock," using PVC, polyethylene, nylon, epoxy, and others. 【Features of PVC (Polyvinyl Chloride)】 ■ Electrical Insulation: Breakdown voltage of the coating is 12kV/mm or higher (compliant with ASTM D149) ■ Volume resistivity: 3×10^10 Ω·cm (compliant with JIS K6911) ■ Hardness (Type A durometer): 65° (compliant with JIS K6253) ■ Resin colors (basic): Black, orange, ivory, and other colors can be freely adjusted ■ Tensile strength: 13.2 MPa (megapascals; for reference, the typical water pressure of a high-pressure washer is 10 MPa) ■ Elongation at break: 392%; Tear strength: 45.3 N/mm *For more details, please refer to the PDF materials or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical-resistant coating

To protect the production equipment (substrate) that uses chemicals! Chemical-resistant coatings are very effective.

In production sites such as factories, equipment is sometimes placed in harsh environments, and it is often the case that processes proceed while using so-called chemicals (or in such an atmosphere). Our company is capable of applying surface treatments with high "chemical resistance" to protect the base of that production equipment. Coatings such as nylon and epoxy can demonstrate this chemical resistance in addition to their main performance, making the application itself very effective. [Main materials with chemical resistance] ■ Fluorine (Teflon) ■ PVC ■ PE ■ Nylon ■ Epoxy *For more details, please refer to the PDF materials or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick coating

A resin with extremely excellent chemical resistance, heat resistance, and electrical properties! Fluororesin processing boasts a significant market share.

The so-called "non-stick" effect represented by the surface treatment of frying pans is the effect of fluoropolymer (Teflon), which is characterized by "release properties and non-stickiness." Once fluorine bonds, it transforms into a property that "does not allow other substances to stick" after formation. This can be described as the non-stick action of fluorine. Compared to other synthetic resins, it possesses unique properties, resulting in a wide range of applications. 【Examples of Characteristics】 ■ Chemical resistance ■ Electrical properties: Due to the structure of fluorine, it is non-polar, and the electrical effects on the resin surface are consistently extremely low, making its insulation resistance and breakdown strength particularly excellent among plastic resins. ■ Heat resistance: Generally boasts a wide range of heat resistance from -100 to +260°C. ※ There may be variations depending on the type of fluoropolymer. *For more details, please refer to the PDF document or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conductive coating

Conductive fluorine, conductive urethane, and fluorinated FX, etc.! It is possible to prevent short circuits in components.

Explosions, fires, and malfunctions of machinery (mainly semiconductors) caused by static electricity can sometimes lead to serious situations. The solution and deterrent to this is anti-static products and "conductive coatings." The basic resin and fluorine coating: The basic performance of urethane coatings will be as per the conventional film specifications. There are proven results in preventing shorts in precision parts or their surrounding components, preventing glass damage on work tables, and preventing practical ignition in gripping tools around high-voltage lines. [Usage Environment (Proven Results)] ■ Prevention of shorts in precision parts (circuits and semiconductors) or their surrounding components ■ Prevention of glass damage on work tables (cutting work tables for precision glass, etc.) ■ Practical ignition prevention in gripping tools (cover wires) around high-voltage lines *For more details, please refer to the PDF materials or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating for kitchens - Surface treatment by Minoru Sangyo Co., Ltd.

This is a fluororesin coating that has passed the Food Sanitation Act under Notification No. 20 of the Ministry of Health, approved by the FDA.

What is kitchen fluoropolymer? It is a fluoropolymer coating for kitchen utensils that meets the standards of the U.S. Food and Drug Administration (FDA) and the Ministry of Health's Notification No. 20 under the Food Sanitation Act, featuring abrasion resistance, corrosion resistance, release properties, and heat resistance. Characteristics of kitchen fluoropolymer coatings: - Silkware (kitchen fluoropolymer coating) Baking temperature: 360-420°C Continuous maximum usage temperature: 260°C Chemical resistance: ◎ Release properties: ◎ Conductivity: ×

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder coating using powder.

Powder coating refers to the process of applying powdered paint directly onto metal using static electricity, unlike conventional liquid paints and solvent-based paints.

Features of Powder Coating Strong and Durable Coating With a single application, it can create a coating thickness of 40-150μ, which is 4-5 times thicker than solvent-based paints. The baked coating hardens to be strong, resistant to scratches, and excels in heat and oil resistance. Flexible Coating Using various types of paints such as epoxy, epoxy polyester, polyester, and nylon, it effectively prevents cracking and peeling of the coating, while also providing abrasion and impact resistance. Rich Color Selection Epoxy polyester powder coatings can accommodate as many as 6,500 different colors. There are various texture patterns available, so please feel free to inquire. Excellent Rust Resistance Compared to conventional solvent-based paints, it has 2-3 times higher weather resistance, and its thick and durable coating is also resistant to scratches. It is expected to provide long-term rust protection, making it suitable for exterior products such as guardrails and fences. Environmentally Friendly The paints used in powder coating are "solvent-free." They do not emit VOCs (volatile organic compounds), which are a cause of photochemical smog. Additionally, there is zero risk of poisoning or fire from organic solvents. It is a painting method that is friendly to both people and the natural environment.

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane coating for wear and scratch prevention and sound dampening of metal parts and products.

It is effective against the noise from metal component transport parts and parts feeders, and the elimination of impact sounds between metals contributes not only to the work environment but also to consideration for the surrounding area.

Urethane coating is a coating resin that dries at room temperature. Because it dries at room temperature, it can be applied to any type of material. Additionally, three different hardness levels can be selected, allowing for hardness selection based on the application. Furthermore, items that have been coated once can be peeled off and recoated, enabling the protection of the workpiece (base material) and allowing for prolonged use. ◆ Advantages of Urethane Coating - Noise reduction (sound absorption) eliminates impact noise between metals - Shock absorption protects products from scratches with impact resistance - Wear resistance similar to high molecular polyethylene and PEEK - Excellent water resistance - Room temperature curing ◆ Treatment Method Degreasing (and baking if necessary) → Blasting → Primer → Topcoat → Room temperature curing ◆ Heat Resistance Temperature Approximately 60°C ◆ Applicable Materials General metals, rubber, various resins ◆ Wear Resistance Comparison (Wear test with carbon steel set at 100) 【Material】 - Urethane: Wear rate 8 - Ultra-high molecular weight polyethylene: Wear rate 22 - Wear-resistant steel: Wear rate 62 - Stainless steel: Wear rate 82 - Polyvinyl chloride: Wear rate 532

Company：みのる産業
Price：Other

Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Development] Achieving coating of thick film 50μ yttria in complex shapes!

Improving the longevity of plasma-resistant, corrosion-resistant, and quartz components in semiconductor manufacturing equipment, setters for molten metals, electronic components, and ferrite sintering, as well as enhancing wettability for crucibles, etc.

Various setters for firing such as MLCC and ferrite components, plasma-resistant materials for semiconductor manufacturing equipment, crucibles for various metal melting, transport rollers, and various quartz components. We have developed a dip coating for ceramics that was generally considered difficult, enabling thick film coatings from various fine ceramics to quartz, isotropic graphite, and refractory materials that are hydrophobic. 【Features】 - High freedom of shape due to unique dipping technology - Excellent adhesion to the substrate - High uniformity of film thickness - High surface roughness of the film surface *Details are provided in the materials below. Please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improvement of plasma resistance for quartz components with Ittria coating.

[New Technology] Full coating possible on complex structures with a new method different from thermal spraying and CVD! *Case-specific coating examples are currently being offered.

Narasaki Industries has developed a ceramic DIP coating that achieves an extremely precise control of film thickness. This allows for greater flexibility in ceramic coatings for a wide range of materials. 【Four Features】 ◆ High freedom of shape, capable of coating 3D shapes at meter scale ◆ Coating possible for most high-performance materials ◆ Average thick film of 50μ achievable ◆ Coating surface has good roughness and excellent smoothness (Ra 0.8 or less) 【Applicable Materials for Coating】 ■ Fine ceramics (alumina, zirconia, aluminum nitride, etc.) ■ Heat-resistant glass such as quartz glass ■ Graphite, high melting point metals *Currently, we are conducting improvement tests to further enhance the density of the film. *Please download and view our coating case collection. We utilize composite ceramic films to achieve optimization according to your application. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Longer lifespan of rolling rollers! Ceramic coating *Technical documentation available.

Rollers necessary for the rolling process. Proposing reduced wear and increased longevity through a unique coating. *The materials are a collection of case studies on the same ceramic products.

Narasaki Industries has developed a ceramic coating that achieves extremely precise film thickness control. Its name is "Ceramic Dip Coating." As the name suggests, the workpiece is dipped into a ceramic slurry to form a film. This allows for greater freedom in ceramic coating for a wide variety of materials and shapes. 【Features】 ◆ High freedom of shape, capable of coating 3D shapes on a meter scale ◆ Coating possible on almost all ceramic substrates ◆ Average thickness of 50μm achievable ◆ Excellent thermal shock resistance with a film having a pore diameter of 0.1μm and a porosity of 30-40% ◆ Good surface roughness of the coating with excellent smoothness (Ra below 0.8) 【Materials that can be coated】 ■ Mullite ■ Alumina-based ■ SIC-based ■ Porous and dense materials used for setters, etc. *Please download and view the coating case collection. We optimize using composite ceramic films according to applications. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reaction prevention! Ceramic coating for fuel cell sintering setters.

[New Technology] Ceramic coating is possible up to the end face with a new method different from thermal spraying! *Available in a range from standard grade to dense grade!

In electronic components, it can be said that there is almost always a "sintering" process involved. Therefore, we would like to introduce a ceramic coating method using a dipping technique that differs from conventional thermal spraying for the setters you are using. 【Four Features】 ◆ High freedom of shape allows for ceramic coating on 3D shapes at meter scale ◆ Ceramic coating is possible on most high-performance materials ◆ Ceramic coating can be applied with an average thickness of 50μm ◆ The surface roughness of the coating is good, providing excellent smoothness (Ra 0.8 or lower) 【Materials that can be coated】 *Main setter materials ■ Mullite ■ Alumina-based ■ Zirconia-based ■ SiC-based *We can accommodate both porous and dense ceramics. *Ceramic coating is also possible on other materials. Currently, we have a lineup of various dense grades of ceramic coating films (some are still in development), and by downloading, you can view SEM image data categorized by grade. We can handle a wide variety of film types, so please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Long-lasting without peeling! Ceramic coating for electronic component setters.

[New Technology] Ceramic coating is possible up to the end face with a new method different from thermal spraying! *Available in a range from standard grade to dense grade!

In electronic components, it can be said that there is almost always a "sintering" process involved. Therefore, we would like to introduce a ceramic coating method using a dipping technique that differs from conventional thermal spraying for the setters you are using. 【Four Features】 ◆ High degree of freedom in shape, allowing ceramic coating on 3D shapes at meter scale ◆ Ceramic coating possible on most high-performance materials ◆ Ceramic coating possible with an average thickness of 50μm ◆ Coating surface has good roughness and excellent smoothness (Ra 0.8 or lower) 【Materials that can be coated】 *Main setter materials ■ Mullite ■ Alumina-based ■ Zirconia-based ■ SiC-based *We can accommodate both porous and dense ceramics. *Ceramic coating is also possible on other materials. Currently, we have a lineup of various dense grades of ceramic coating films (some are still in development), and by downloading, you can view SEM image data categorized by grade. We can handle a wide variety of film types, so please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

It is possible to form a ceramic film on complex structures such as three-dimensional structures and hollow shapes!

【New Technology】Ceramic Dip Coating!! It enables the formation of ceramic films on complex structures such as 3D structures and hollow shapes.

In electronic components, it can be said that there is almost always a "sintering" process involved. Therefore, we would like to introduce a ceramic coating method using a dipping technique that differs from conventional thermal spraying for the setters you are using. 【Four Features】 ◆ High freedom of shape, capable of coating 3D shapes on a meter scale ◆ Coating possible on most high-performance materials ◆ Average thickness of 50μm achievable ◆ Good surface roughness of the coating with excellent smoothness (Ra 0.8 or lower) 【Materials that can be coated】 *Main setter materials ■ Mullite ■ Alumina-based ■ Zirconia-based ■ SiC-based *Both porous and dense materials can be accommodated. For coatings related to setters, many customers are selecting "zirconia films," so if you are having trouble choosing a film type, please try zirconia films first! Additionally, we currently have a lineup of dense grades of zirconia films, and by downloading, you can view SEM image data categorized by grade. In addition to zirconia, many other combinations of film types are possible, so please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Suitable for "glass fusion prevention" - Ceramic DIP coating

[New Technology] Achieving prevention of fusion between glass and setters with ceramic coating using the DIP method.

Do you have any concerns about products fusing to the setter during firing? Please consider this ceramic coating for improving yield and quality. We would like to introduce a ceramic coating using a dipping method that differs from conventional thermal spraying for the setters you are using. This is also featured on the following webpage: https://denki.narasaki.co.jp/ceramic-dipcoating-1-0 【Four Features】 ◆ High freedom of shape, capable of ceramic coating for 3D shapes at meter scale ◆ Ceramic coating possible for most high-performance materials ◆ Ceramic coating possible with an average thickness of 50μ ◆ Coating surface has good roughness and excellent smoothness (Ra 0.8 or less) 【Materials that can be coated】 *Main setter materials ■ Mullite ■ Alumina-based ■ Zirconia-based ■ SiC-based *Applicable to both porous and dense ceramics. *Ceramic coating is also possible for other materials. Please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating Product List and Ranking from 569 Manufacturers, Suppliers and Companies | IPROS GMS

coating Manufacturer, Suppliers and Company Rankings

coating Product ranking