coating Product List and Ranking from 574 Manufacturers, Suppliers and Companies

Moisture-proof coating agent, dries at room temperature in 3 minutes, non-flammable, free of regulated substances.

Numerous achievements in vehicle-mounted circuit boards. Environmentally friendly (non-organic solvent + non-hazardous + low odor) moisture-proof coating agent for printed circuit boards. Dries at room temperature without the need for heating.

The protective coating agent for electronic circuit boards (conformal coating) "Fluorosurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent 'Ideal for narrow pitch leak prevention'

Moisture-proof coating agent for substrates. Strongly prevents leakage with high insulation properties. Room temperature drying type. SDGs compliant (non-organic solvent + non-hazardous + low odor).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety law restrictions. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Substrate coating agent, ideal for leak prevention in narrow pitch applications.

Forms a high insulation film. Proven results in mobile and automotive substrates. Only requires room temperature drying, no heating needed. Non-VOC organic solvent + non-hazardous material, so explosion-proof equipment is not required.

Conformal Coating (Protective Coating Agent for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is ideal for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards and leak prevention for narrow pitch patterns. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Additionally, PFOS and PFOA are not used at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Superior moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! Exhibits over ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, no need for explosion-proofing or environmental measurement, not subject to regulation.

Numerous achievements in automotive circuit boards. Environmentally friendly (non-organic solvent + non-hazardous + low odor) moisture-proof coating agent for printed circuit boards. Dries at room temperature without the need for heating.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted substrates. It is non-flammable and not classified as an organic solvent, thus free from regulations under fire safety laws and occupational safety and health laws. Additionally, it does not use any PFAS regulated substances such as PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The weight increase due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin coating agent for metal blades, simply apply on-site and air dry at room temperature.

Just by applying it to a metal blade, tape and glue will not stick. Easily processed on-site. The transparent thin film does not affect cutting performance. It is durable and easy to reapply.

When you apply FluoroSurf FG-5093 to cutting tools such as Thomson blades, scissors, utility knives, and push-cut blades, these adhesives do not stick during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and extremely thin, about 10 nanometers, which does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it difficult for adhesives and tapes to stick. ■ Transparent thin film (at the nanometer level) has minimal impact on appearance. ■ Can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effect diminishes, simple reapplication restores performance easily. ■ Non-flammable and safe, with low odor. ■ Completely free of regulated PFAS substances such as PFOS, PFOA, and PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other polymer materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold surface treatment agent allows for continuous release. Easy application on-site.

Please try this when you have difficulty with resin molding. It demonstrates overwhelming continuous release properties. After application in the molding area, air dry for 2 minutes at room temperature.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Acid-resistant coating agent that works just by applying it, free of regulated substances, transparent thin film.

Acid-resistant fluorine coating agent that provides strong protection against acids from fuel cells and lithium batteries. Can be applied in-house. Free of regulated substances.

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, providing various benefits such as acid protection, water and oil repellency, prevention of grease migration (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resins ■ Insulating and moisture-proof coating for electrical circuits ■ Prevention of leaks in electrical circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brush or immersion. It dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, exhibiting properties such as dirt resistance, water repellency, and moisture resistance. 〇 PFAS regulated substances PFOS, PFOA, and PFHxS are not used at all. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

自社施工可能なフッ素コーティング　PFAS規制対象外

常温型透明皮膜フッ素コ－ティング剤　塗るだけで撥水撥油や指紋付着防止、汚れ防止、防湿、非粘着、離型性、耐酸性を発揮。

フッ素コート剤「フロロサーフ」は、常温で形成されるフッ素樹脂皮膜が、撥水撥油、油脂類のはいあがり（拡散）防止・指紋付着防止・防汚：潤滑・離型など、さまざまなメリットを発揮します。【特長】〇PFAS規制物質　（PFOA PFOS PFHｘSなど）は不使用です。 ◯特殊なフッ素樹脂を不燃性のフッ素系溶剤に溶解し溶液化。 ◯刷毛や浸漬などで簡単コーティング。室温で5秒～15分で乾燥します。 ◯乾燥後は透明で薄膜のフッ素樹脂皮膜が形成され、防汚、撥水、防湿等の効力を発揮。【こんな用途に効果を発揮！】 ■金属の硫化や酸化防止 ■耐リチウム電解液コーティング ■樹脂やエラストマー成型の金型離型剤 ■ディスプレイやレンズの指紋付着防止 ■ミニチュアモーター・スピンドルモーターの軸受け油流出防止 ■封止樹脂流れ止め ■電気回路の絶縁防湿コーティングリーク防止 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。 ※なお、弊社製品は工業用化学製品のため個人用途（法人格のない場合）、医療用途、食品に触れる用途につきましては、サンプル提供をいたしかねます。

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment that easily forms a dirt-repellent, non-stick, water-repellent, and oil-repellent surface at room temperature.

Room temperature type fluorine coating agent. Easy to apply, and after drying, it exhibits effects such as water and oil repellency, fingerprint resistance, dirt resistance, and release properties! No regulated substances used.

The fluorine coating agent "FluoroSurf," which is a water and oil repellent treatment agent, exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of grease, diffusion prevention, adhesion prevention, and dirt resistance. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent or organic solvent to create a solution. ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, exhibiting effects such as dirt resistance, water repellency, and moisture resistance. ◯ PFAS regulated substances are not used. 【Effective for the following applications!】 ■ Water and oil repellent treatment for shoes and clothing = waterproof spray concentrate… ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Waterproof and moisture-proof protective coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Resin flow stop for capacitor sealing ■ Reduction of reflected light in optical components ■ Binder for dry lubricants *Free samples are currently available. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Moisture-proof coating for substrates: "High reliability," "Room temperature fast drying," "Non-flammable."

Unlike UV-curable and thermosetting types, there are no uncured components left, ensuring high reliability. It dries at room temperature in 5 minutes, eliminating the need for a drying process. It is non-flammable and does not contain organic solvents, ensuring high safety.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" has numerous achievements in waterproofing and insulation protection for automotive circuit boards and electronic components. Additionally, it is not subject to PFAS regulations. 【Performance Features】 ■ Higher moisture and waterproofing properties compared to other resins! → It has 4 times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. This minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect circuit boards during electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ In reactive coatings (silicone, UV acrylic, etc.), unreacted components remain and affect properties. This product does not leave unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures at electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PFAS Measures: For Those Struggling with the Suspension of Fluorine Product Supply

We offer alternative products for those who are having trouble obtaining release agents, water-repellent and oil-repellent agents, and fluorine-based compounds due to supply discontinuation. Please feel free to consult with us.

The following PFASs are currently subject to regulation: Fully regulated: Precursors of PFOS, PFOA, and PFHXs are subject to regulation for almost all uses. Planned European Restrictions: PFHxA is prohibited for the following limited uses: Textiles, leather, paper, food packaging, shoes, etc. As there is no empirical evidence proving the harmfulness of other PFASs, and restricting them would have a significant impact on industries such as semiconductors and automobiles, the European Chemicals Agency announced on August 27th of this year that fluoropolymers for industrial use will be exempt from regulation. Several fluorochemical manufacturers have announced the discontinuation of their products; however, our products are currently not subject to regulation, so we do not plan to halt supply. If you are facing issues due to the discontinuation of products such as release agents or water- and oil-repellent treatments, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent for automobiles that can be applied easily.

Ensure visibility during rainy weather! For automotive water-repellent coating.

In the automotive industry, ensuring visibility during rainy weather is extremely important for safe driving. When water droplets adhere to the windshield or body, visibility decreases, increasing the risk of accidents. High-performance water-repellent coatings are essential for repelling rainwater and maintaining clear visibility. Our fluorine-based coating exhibits excellent water-repellent properties, supporting safe driving. 【Usage Scenarios】 - Water-repellent coating for windshields - Water-repellent coating for the body - Water-repellent coating for mirrors 【Benefits of Implementation】 - Improved visibility during rainy weather, enhancing safety - Easier removal of dirt during car washes - Long-lasting coating effects

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent for preventing ink adhesion in the printing industry.

Fluorine coating agent that prevents ink adhesion and improves the quality of printed materials.

In the printing industry, ink adhesion and stains are significant issues that greatly compromise the quality of printed materials. Particularly in various printing methods such as inkjet and offset printing, ink bleeding, back transfer, and the adhesion of stains can lead to the occurrence of defective products and a decrease in work efficiency. Our fluorine coating agent suppresses ink adhesion and contributes to the improvement of printed material quality. 【Usage Scenarios】 - Prevention of ink adhesion on printed materials - Prevention of ink stains on printing machines - Prevention of nozzle clogging in inkjet printers 【Benefits of Implementation】 - Improvement in the quality of printed materials - Reduction of defective products - Increase in work efficiency

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine coating agent for semiconductor manufacturing that can be simply applied.

Maintain a cleanroom environment! Improve yield with dirt resistance, water repellency, and moisture resistance.

In the semiconductor manufacturing industry, maintaining a cleanroom environment is extremely important. Fine dust and particles can significantly degrade product quality, so thorough contamination control measures are required. Additionally, the effects of humidity and chemicals during the manufacturing process can also undermine product reliability. Our fluorine coating agents address these challenges by providing anti-contamination, water-repellent, and moisture-proof properties, helping to maintain the cleanroom environment and contribute to yield improvement. 【Application Scenarios】 - Contamination control measures for equipment and parts within cleanrooms - Water-repellent and moisture-proof protection for semiconductor manufacturing equipment - Dirt prevention for wafer transport fixtures 【Benefits of Implementation】 - Reduction in defect rates due to foreign material adhesion - Decreased frequency of equipment maintenance - Improvement in product quality

Company：フロロテクノロジー
Price：Other

paint
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Safe substrate coating agent: Non-organic solvent + non-hazardous materials, no regulated substances used.

The fire protection law does not apply to hazardous materials + organic solvents are not applicable, allowing for safe use and significantly reducing management items and equipment costs on-site. High-performance moisture resistance + acid resistance powerfully protects the substrate.

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This means that certification for hazardous material handling, quantity management, and explosion-proof equipment are all unnecessary. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. Current PFAS regulatory substances such as PFOS/PFOA are not used. *Currently, free samples are being offered. We sincerely apologize, but our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, room temperature drying only, non-hazardous, high safety.

Environmentally friendly (non-organic solvent, non-hazardous, low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → This eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *Please contact us if you would like a free sample.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating agent for substrates, high moisture resistance, room temperature drying in a short time, non-hazardous, high safety.

For waterproofing and insulation of electronic components, as well as moisture-proof and waterproof coating of circuit boards! Four times the moisture resistance of polyurethane and acrylic! Non-flammable and highly safe! *Samples available.

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. PFAS-regulated substances are not used. 【Features】 - Four times the moisture resistance compared to urethane and acrylic moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use. There are no fire safety regulations, significantly reducing management items. - Not classified as an organic solvent. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, environmentally friendly, room temperature drying, SDGs.

Environmentally friendly (non-organic solvent + non-hazardous + low odor) room temperature drying moisture-proof coating agent for printed circuit boards (conformal coating agent).

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 Perfectly aligned with SDGs ■ Non-flammable and low-odor liquid, making it safe to use → Safe due to its non-flammability and low toxicity. Not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment or processes, such as heating furnaces, are required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually indefinite. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent <Free sample available> Non-hazardous material

Safe and secure with non-organic solvents. The "FluoroSurf FG-3650 Series" is suitable for conformal coating for waterproofing and insulation of electronic components.

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. Although it is fluorine-based, it is not subject to PFAS regulations. ▼ Excellent performance of Fluorosurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidative gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent for substrate migration prevention

High-performance coating agent for electronic substrates, non-hazardous, free of regulated substances, air-dry at room temperature (no drying process required).

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from lithium battery electrolyte leakage ■ Malfunctions and corrosion caused by leaks due to condensation in high humidity ■ No need for management as hazardous materials or organic solvents ■ Exempt from PFAS regulatory substances *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, excellent release properties, continuous release with a single application, free of regulated substances.

FloroSurf FG-5095W is an environmentally friendly water-soluble release agent with excellent release properties. Please try it when conventional release agents do not work.

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent for carbon fiber CFRP, excellent release properties.

Overwhelming continuous release properties in carbon fiber CFRP molding. Easy application with a brush or spray. Dries at room temperature in 5 minutes after application. Samples available.

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Signal stabilization with coating agents for circuit boards for communication.

Protects the circuit board of communication equipment and improves signal stability! Moisture-proof, insulation, and acid resistance.

In the telecommunications industry, the reliability of electronic devices is extremely important, and the stability of signals is essential. Equipment used outdoors or in harsh environments can deteriorate due to moisture, corrosive substances, and temperature changes, potentially leading to signal disruption and equipment failure. Our coating agents for circuit boards address these issues through moisture resistance, insulation, and acid resistance, supporting stable signal transmission. 【Usage Scenarios】 - Base stations - Communication cable connections - Wireless communication devices - IoT devices 【Benefits of Implementation】 - Signal stabilization - Extended equipment lifespan - Reduced maintenance costs - Lower risk of failure

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating agent for substrates for solar power generation

Protects the substrate of the solar power generation system and contributes to maintaining long-term efficiency.

In the solar power generation industry, the long-term stable operation of systems and the maintenance of power generation efficiency are crucial. Solar power generation systems installed in outdoor environments are susceptible to influences such as humidity, temperature changes, ultraviolet rays, and salt damage, which can lead to substrate corrosion and insulation failures, potentially resulting in decreased power generation efficiency and system failures. Our coating agents for substrates address these challenges and contribute to the long-term stable operation and efficiency maintenance of the systems by protecting the substrates. 【Usage Scenarios】 - Substrates of solar power generation systems - Outdoor electronic devices - Use in humid environments 【Benefits of Implementation】 - Prevention of substrate corrosion - Improvement of insulation properties - Long-term system stability - Maintenance of power generation efficiency

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agents [for rubber molding] continuous release and quality improvement

Solving the challenges of rubber molding sites! Improving productivity with overwhelming release properties.

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for electronic components

Ideal for precision molding! Continuous release, non-silicone, air-dry in 5 minutes at room temperature.

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for automotive resin parts

Reduce molding defects of resin and rubber parts! Improve productivity with continuous release.

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent, high performance and continuous release, transparent resin without cloudiness, dry.

Please try this when conventional release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conformal coating agent, non-flammable, no explosion-proof equipment required.

Four times the moisture-proof performance of urethane and acrylic! Non-flammable, no need for explosion-proof equipment or hazardous material storage. *Samples available.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 - Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use without fire safety regulations or the need for explosion-proof equipment or hazardous material storage. - Exempt from the Organic Law under the Industrial Safety and Health Act, reducing management items. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes, no heating required. - Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS, etc.). *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

coating Product List and Ranking from 574 Manufacturers, Suppliers and Companies | IPROS GMS

coating Manufacturer, Suppliers and Company Rankings

coating Product ranking