disk Product List and Ranking from 52 Manufacturers, Suppliers and Companies

0331 Target: With carbon black masterbatch

The installation of the Brodisk has solved the problem of discharging powdered materials!

The facility manufacturing masterbatch has adopted the "Brodisk." Due to the hopper's slope being gentler than the material's angle of repose, there were difficulties in discharging the target powder. However, the installation of the Brodisk has resolved this issue. 【Overview of Usage Conditions】 ■Raw Materials - Carbon black - Particle size = under 50μm - Bulk density = approximately 0.15 - Angle of repose = approximately 45° ■Hopper Size - 1200×1200 ■Brodisk Arrangement - 3 units on each side, totaling 12 units installed ■Brodisk Operation - Controlled by a controller with 6 solenoid valves, the Brodisk is sequentially turned ON in groups of 2 at 6 locations. *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0348 Shortening the discharge time of corn feed.

For solving problems such as rat hole bridges! Introducing case studies of Brodisk implementation.

There have been instances of rat holes occurring in the feed silo, and we have received inquiries about not being able to discharge within the specified time... We want to do something about it... As usual, we reviewed the silo diagram and proposed the arrangement of the blow disk, which was promptly implemented. After the installation of the equipment, we were able to discharge approximately 4 tons in a stable manner within about 10 minutes. There were constraints on the compressor capacity, but the customer adjusted the air pressure, air ON time, and air OFF time in various ways to find the minimum air consumption conditions. [Overview] ■ Material: Corn (powder + grains approximately 5mm) *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of the bridge in elastomer crushed products (powder).

You can set the air ON/OFF time at will! Introducing case studies of Brodisk deliveries!

Here is an introduction to a case study on bridge prevention using a relatively small hopper. The material is said to be an elastomer powder, and from what I saw of the sample, it contained a significant amount of powder. Since a test was requested, we lent the necessary quantity of our equipment for the experiment. The results were as expected, and the bridge was resolved immediately. In this case, we installed one Brodie disk (BD-15) on each of the three inclined surfaces, for a total of three. The three disks are turned ON and OFF simultaneously using the controller (C-SV1). [Hopper Conditions] ■ Size: 200×500 ■ Shape: Three inclined surfaces, one vertical ■ Discharge: 40φ from the lower end of the vertical surface *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery to concrete secondary product manufacturer.

We also provide advice on installation locations! Here are some case studies of Bro-Disc implementation.

This is a project delivered to a concrete secondary product manufacturer. During the equipment update, a Brody disk was introduced in the newly constructed silo. Previously, they were using a metal filter for aeration, but due to experiences with discharge issues such as bridging, they decided to adopt this solution. It has been a considerable time since the implementation of this system, and there have been no problems at all, leading to customer satisfaction. [Overview] ■ Target powder: Cement ■ Silo diameter: φ2800 ■ Discharge diameter: φ350 * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of the bridge caused by the repurposing of the feed tank.

Introducing a case study on the implementation of a Brody disk for silo bridge prevention.

This is a case study on bridge issues in feed silos. We received an inquiry stating that a silo for crushed feed rice had started to experience bridging when repurposed for other feed types. The details of the new material are unclear, but previously, discharge was facilitated by vibrating plates. Based on related information, we provided guidance on the placement of our equipment, which was subsequently adopted. After the installation of our equipment, it has been evaluated that bridging no longer occurs. [Overview] ■ Silo diameter: 2500φ ■ Discharge diameter: 500φ (further narrowed below this) ■ Hopper section slope: 45° *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0370 Promotion of the outflow of titanium dioxide mixture

An example of installing a larger number of broad disks/broad disk minis to mitigate risks.

This is a consultation request from an engineering company. Due to the discharge diameter being 3S and relatively small, we installed two Bro-Disk Minis at different heights in this area, and four Bro-Disks on the circumference above, for a total of eight units. A key point this time is that the Bro-Disk Minis installed below have a lower air flow compared to the Bro-Disks, so we have conducted two consecutive air ON operations. After delivery, we received feedback stating, "The Bro-Disk Minis installed near the discharge area were absolutely necessary." [Overview] ■ Hopper diameter: 600φ ■ Discharge diameter: 3S *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked through the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0376 Prevention of clogging in powdered activated carbon

Introducing a case where a blow disk was installed in the powder activated carbon feeding hopper with two lines.

This is a case adopted by a facility primarily producing functional resin products. There are two lines with hoppers, and one line has a significantly small discharge diameter from the hopper, which increased the risk of bridging. After hearing the details, we provided a countermeasure proposal, which was immediately implemented. Since the installation of this equipment, we have received feedback that bridging and blockages have not occurred. 【Overview of Bro-Disk Arrangement】 ■ Line 1 - Four Bro-Disks arranged on the circumference 200-300mm above the discharge section ■ Line 2 - Four Bro-Disks arranged on the circumference 200-300mm above the discharge section - Four Mini Bro-Disks arranged on the circumference 100-200mm above the discharge section *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be accessed via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the intermediate processing plant for industrial waste

An example of installing a blow disk to solve the problem of not being able to discharge from the raw material hopper.

This is an example of adoption by an intermediate waste processing contractor. First of all, since there was a request to try it out urgently (to be installed on the actual machine), we listened to the various conditions and decided to send (loan) the best-suited model in the necessary quantity. The results of the actual machine test were good, and later we received an order for the controller, and it is being used smoothly. 【Overview】 ■ Target material: Soil (approximately 5% moisture) ■ Hopper diameter: 1300φ ■ Discharge section: 200φ 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous implementation examples. You can check them via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0385 Prevention of bridge formation in carbon micro powder

An example of using a blow disk for bridge prevention in the storage hopper located above the drum filling machine.

The fluidity of the target material does not seem to be particularly bad, but it is a case that was installed because "when the residence time is long, it tends to clog near the hopper discharge area." We often receive inquiries regarding bridging solutions for materials with very poor fluidity, so there are cases where eight standard Brody disks are installed. However, in this case, good results have been achieved with the installation of four disks. 【Overview】 ■ Hopper diameter: 1500φ ■ Hopper capacity: 2m3 ■ Target material: Carbon powder (average particle diameter 15μm) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of foreign matter contamination risk, as strength and durability are crucial. The silicone disks of this equipment are exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous implementation examples. You can check them via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0393 Cement silo discharge section

A case where this Brody disk was introduced due to concerns about blockages in the discharge section of the cement silo.

This is a project that was adopted through the introduction of a consulting company specializing in environmental-related systems. Concerns were raised about potential blockages at the discharge section of a newly constructed cement silo, leading to the introduction of our Brody Disk. As there were significant concerns from the user regarding the new plant installation, we lent them a sample of our equipment. After the plant began operation, they reported that the initial concerns were completely unfounded and provided high praise for its performance. 【Overview】 ■ Silo Diameter: 2500φ ■ Discharge Section: 250φ×2 Ports 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is crucial in terms of the risk of foreign matter contamination, so strength and durability are very important. Our silicone disk is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resolving the bridge of resin powder (water-added)

An example of installing a Brody disk to solve the problem of the bridge phenomenon occurring when water is added to resin powder.

This is an example we received from a manufacturer of labor-saving machinery. We were consulted because "the customer (in the chemical industry) started adding water to resin powder, and a bridging phenomenon that had not occurred before began to happen in the delivered equipment." The key point this time is that while the flowability of the resin powder before water addition is relatively good, the angle of repose increases due to the addition of water, and there is a possibility of increasing the amount of water added in the future. In this case, considering that the discharge diameter of the hopper is somewhat small at 100A and the worsening of the angle of repose due to increased water addition, we added four mini blow discs (BD-08) just above the 100A discharge section in addition to the four previously mentioned blow discs. After implementation, we followed up and there have been no troubles; it is operating smoothly. 【Overview】 ■ Product Name: Resin Powder ■ Particle Size: 10 to 1000 μm ■ Hopper Shape: Cone 1000φ ■ Discharge Diameter: 100A *For more details, please refer to the PDF materials or feel free to contact us. *Our website features many examples of implementations. You can check them from the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0397 Prevention of bridge formation of dust containing glass fibers

Prevention of dust containing glass fibers! An example of applying a blow disk to the hopper section of a dust collector.

This is a case where a blow disk was adopted for application to new equipment. The application location is the dust collector hopper section. Since the blow disk injects air along the inner surface of the hopper, it is generally the case that the effectiveness does not change significantly even if the installation position is slightly off. The key point this time is that due to the properties of the target material, the air pressure used is high, the air ON time is short, and air aeration is performed in a pulsed manner. [Overview] ■ Hopper approximate dimensions: 2000×2000 (discharge section 200×200) ■ Blow disk arrangement - 3 units per 4 sides, with 1 unit on the lower level and 2 units on the upper level per side (However, only 2 units are installed on one side due to the inspection port) - Both lower and upper levels are positioned quite low, near the discharge port * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous implementation examples. You can check them from the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0401 Improvement measures for existing users (calcium hydroxide)

After the implementation of the improvement measures, we have received feedback that there are no longer any rat holes at all!

This is a case inquiry from a user who has already installed a Brodisk. Although they purchased and installed the Brodisk as a measure against rat holes, they consulted us because they observed that the rat holes had not been resolved upon visual inspection of the inside of the hopper during maintenance. As a countermeasure, we advised them to increase the number of Brodisk installations, reconsider the placement, use a controller with four solenoid valves, and review the air piping (such as tube diameter conditions), which they implemented. After implementing this improvement plan, the user reported that there were no rat holes at all. [Overview of Usage Conditions] (Placement overview and control after improvement) ■ Hopper dimensions: 1500×1500 ■ Approximate dimensions of hopper discharge area: 300×300 ■ Placement overview: 2 units on one side, totaling 8 units installed ■ Control: Air is turned on sequentially in pairs with a time delay using a controller that incorporates four solenoid valves. *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0404 Measures against rat holes in catalyst raw materials

A case where Brodisk was adopted repeatedly for the expansion of the line.

This is a repeat project that we have been hired for. This project was previously adopted a few years ago, and we received feedback from the user that "extremely good results were obtained." This time, we are being hired again for the expansion of a similar line. In this case, we were informed about the properties of the material measured with a powder tester. We would appreciate it if you could provide such data, but even if only the material sample and hopper diagram are provided, we can inform the customer about the optimal arrangement of our equipment based on that information. Please feel free to contact us. [Overview] ■ Trouble Situation - Rat hole in an 1800φ conical hopper - Discharge diameter is 200A, with a typical rat hole forming directly above the discharge section. ■ Material - Name: Confidential (catalyst raw material) - Particle size: Several micrometers - Angle of repose: Approximately 50° - Bulk density: Loose approximately 0.3 / Dense approximately 0.6 *For more details, please refer to the PDF document or feel free to contact us. *We have many examples published on our website. You can check them via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0409 Using a fertilizer mixing scale

We recommend testing by borrowing the equipment, and you were able to confirm its effectiveness!

This is an introduction to a case where a customer who has been using our equipment for some time expressed the desire to install an absolute blow disk because the target material has a high moisture content and also contains oil. When we first made contact, regardless of whether they would adopt our equipment, we recommended testing it by lending it out, which allowed them to confirm its effectiveness. Since then, they have been using our products repeatedly. 【Overview】 ■ Installed under a two-way switching damper ■ Hopper size is approximately 1000×500 ■ Quantity: 4 units × 2 hoppers ■ Product specifications: Blow disk BD-15S-B, 8 units *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0411　サービスステーション（セメント）向けに納入

稼働後の状況はもちろん良好！　プラント設備工事業者様にご採用いただいた事例のご紹介です

SS向けの案件で、従来使用していた「〇〇レーション」というブリッジ防止機器が調達できないとのことで代替え用としてお問い合わせいただきました。きっかけは、代替品としてのお問い合わせでしたが、ご使用条件などをもとに、当社ブローディスクの配置や設置方法についてお打合せを進めると、設置数量・機器コスト面・取付工事の面などでメリットが生まれることが判明。稼働後の状況は、もちろん良好でユーザー様にもご満足いただいています。【概要】 ■直径3800φサイロの下方に（今回はかなり下のほうのみです）　4個×2段に配置 ■製品仕様：ブローディスク BD-15S-B 8個 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。 ※当社ホームページに多数の実施例を掲載しています。　下記リンクよりご確認いただけます。

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0429 Promote the discharge of fly ash

We have adopted a blow disk to improve the emission defects occurring on the fly ash side!

This is an inquiry made through a trading company regarding an issue at an existing plant. A single round silo is divided into two sections by an internal partition, and this equipment was introduced to improve the discharge issues occurring on the fly ash side of one half. The plant originally had aeration nozzles installed, but since that was not effective, this equipment was adopted. After the introduction of this equipment, it has been operating without any problems. 【Overview of Blower Disk Installation】 ■ 8 standard blower disks installed in the silo section (Arranged in 3 tiers: 3 + 2 + 3) ■ 2 standard blower disks installed in the chute section (The chute section has sufficient slope, so 2 disks are installed at different heights) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0426 Compatible with fluorine rubber blow discs mini.

In applicable devices, all silicone is not usable! We have adopted a fluororubber blow disk mini.

This is an inquiry regarding bridge measures for a 350Ø small hopper. The user indicated that "all silicone is not applicable for the equipment," so we provided samples of products made from either EPDM or fluororubber. The user evaluated these and ultimately adopted the fluororubber blow disk mini. The effectiveness of the crucial bridge measures is, of course, "OK." 【Overview】 ■ Hopper diameter: 350Ø ■ Discharge diameter: 100Ø ■ Contents: Name undisclosed (Loose density 0.5, particle size approximately 100μm, hygroscopic) ■ Configuration: Two blow disk minis installed in two tiers (The lower and upper tiers are positioned 90° apart) *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples. You can check them via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0425 Solving the bridge for sawdust (fuel)

This is an example of installing a Brody disk to address the issue of poor discharge of sawdust.

A machinery device manufacturer has consulted us, expressing concerns about ongoing troubles with past projects, asking if there is anything that can be done. The customer requested to install not only at the bottom of the hopper but also at the top, based on their own experience, and we installed 8 units. After installation, we received feedback that the discharge issues were completely resolved. 【Overview】 ■ Hopper to be installed ・1200×1200 (Capacity: 2.5m³) ・2-sided slope (slope 60°) ・Screw discharge 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0443 Resolving the bridge of carbon-containing dust

We are providing information about the installation locations and control examples of the Brodisk according to the customer's requirements!

We would like to introduce a case where this equipment was implemented to address bridging issues in a dust collector hopper for local exhaust ventilation. The dust being collected contains carbon, and there is a period when the original material is left outdoors in a bulk bag, which particularly absorbs moisture during rainy weather, leading to bridging. The bridging situation occurs right above the discharge device (rotary valve), where we installed four units, one on each side in this area. Additionally, we installed four more units slightly higher up (each positioned at the corners of the hopper to prevent retention in the four corners), bringing the total to eight units. 【Overview】 ■ Hopper size: approximately 2000×2000 ■ Discharge section: 200A *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0439 Attached to vehicle-mounted bag filter

Easily suppress bridges with the combined effect of aeration and the vibration of rubber discs!

We would like to introduce an example of our vehicle-mounted bag filter. Due to various constraints for vehicle use, it was reported that the repose angle of the hopper could not be sufficiently secured, leading to bridging issues. As a result of adopting our equipment as a countermeasure against bridging in the vehicle-mounted dust collector hopper, we achieved effective results and customer satisfaction. 【Overview】 ■ Hopper diameter: Approximately 1600Φ ■ Discharge diameter: 400Φ ■ Hopper repose angle: Approximately 55° ■ Target suction materials: Fly ash, etc. 【Key Points of Our Equipment】 ■ The elastic disc (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disc of our equipment excels in strength and durability. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous examples of implementations. You can check them via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0447 Promoting the discharge of dihydrate gypsum powder

We recommended the BD-20 type, which has a larger air volume compared to the standard broad disk, and you adopted it!

This is an introduction to a case where the BD-20 type, which has a higher air volume compared to the standard BD-15 type, was used. The customer inquired about installing a new powder storage tank, anticipating that bridging of the crushed gypsum board would occur, and requested this equipment. The key point of this case is that the slope of the hopper could not be sufficiently secured. Therefore, we recommended the BD-20 type, which has a higher air volume compared to the standard Brodisk, and it has been adopted. The overview is as follows. 【Case Overview】 ■ Hopper ・Diameter: 1600φ ・Cone section slope: Approximately 50° ■ Material ・Name: Dihydrate gypsum (crushed gypsum board, paper removal) ・Particle size: Approximately 100μm on average ・Apparent specific gravity: About 0.5-0.6 *For more details, please refer to the PDF materials or feel free to contact us. *We have many implementation examples posted on our website, which can be checked via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0474 Elimination of bridges in high humidity sites.

Introducing a Brody disk for wastewater treatment facilities! Easily resolves bridges and rat holes.

When the humidity at the site increases, bridges frequently occur. Here, we would like to introduce a case where measures were taken to address this issue. Two Brody Disk Minis were installed opposite the square hopper, and a controller (C-SV1) with one solenoid valve was used to provide intermittent aeration for both units simultaneously. In general, for fine powders with poor fluidity, the air ON time is often set to around 3-5 seconds. However, in this case, 1-2 seconds yielded good results. 【Case Overview】 ■ Application: Wastewater treatment equipment ■ Target material: Bio-coagulant (similar to wood chips) ■ Hopper: Approximately 250 mm square 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0481 The silicon disk of this device is highly durable!

The thickness and shape of the disk are also determined with durability in mind! We assist in selecting the model of this equipment and planning its layout according to the customer's situation!

We received contact from a customer using other bridge breakers as a countermeasure for the lime silo bridge. After starting operation, the rubber disk-type aerator in use was damaged within a short period, and even after replacement, it failed again in a similar short time. Therefore, the customer consulted us about wanting to use our blow disk. The material used for the elastic disk of the blow disk is a very special silicone rubber, which is significantly more durable compared to general silicone. Additionally, the thickness and shape of the disk have been determined with durability in mind. We provided the customer with detailed information including this, and they adopted our equipment, later evaluating that no troubles like those experienced previously have occurred. 【Product Specifications】 ■ Blow Disk BD-15S-B 8 pieces *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0488 Rice milling tank residual grains, removal

Prevent damage to the hopper! Introduction of measures to address residual grains at the corners of the corner hopper and the adhesion of bran to the hopper walls.

This is a case where a brody disk was installed as a measure against residual grains in the corners of the hopper and the adhesion of bran to the hopper walls. The customer considered introducing this equipment, stating that "while the residual rice can be addressed with hammering, it damages the hopper's surface, and measures against bran adhesion must also be considered." Initially, they requested to confirm the actual equipment, so we sent a sample of the equipment and then discussed its placement before proceeding with the introduction. 【Overview】 ■ Hopper Size: 1000×1000 ■ Discharge Outlet Size: 150×150 ■ Target Material: White rice (bran adhering to the inner surface of the hopper) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0498 Prevention of clogging of flake-shaped chemical products

The discharge issues have been resolved, and operations are running smoothly! It is possible to provide examples of arrangements and controls that are considered suitable, including costs.

Here is a case study of a major chemical company that adopted our solution. Despite the hopper's apex angle being approximately 30° (with an inclination of about 75° from the horizontal plane), they consulted us due to difficulties in discharge. Using a hopper that the customer had (not an actual machine), we conducted tests with our loaned equipment, and after subsequent discussions, they adopted our BroaDisk. After the adoption, the discharge issues were resolved, and it has been operating smoothly. 【Case Overview】 ■ Material: Chemical product flakes (approximately 10mm, easily breakable flakes) ■ Hopper ・Diameter: φ1800 ・Discharge diameter: 200A ■ Equipment arrangement: A total of 12 units installed in 4 tiers, with 3 units placed every 120° on the same circumference. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0499 Installation on activated carbon and quicklime silos.

Air aerators are important for placement! We will provide advice on selecting the appropriate model and planning the layout according to the conditions.

We would like to introduce a project requested by a client in the silo canning business. The end user expressed a desire to install our BroaDisk, and we received an inquiry from the silo contractor. It seemed that this representative had no experience with aeration or bridge breakers at all, so we decided to convey the basic concepts and considerations for this case before proceeding with the order. 【Case Overview】 ■ Activated Carbon Silo ・Diameter: φ2000 ・Capacity: 5m3 ・Equipment Configuration: 4 units × 2 tiers (Total 8 units) ■ Hydrated Lime Silo ・Diameter: φ3000 ・Capacity: 50m3 ・Equipment Configuration: 4 units × 3 tiers (Total 12 units) *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clogging of crushed elastomer (TPO) products.

The results are very good! I would like to introduce a case where a total of 3 items were adopted.

The customer contacted us requesting to borrow a "Broady Disk Mini" because the crushed material was getting stuck in the hopper. Since the hopper in question was a small rectangular hopper, we prepared and sent four units of the Broady Disk Mini "BD-08S type" for the customer to try out. There was a viewing window on one side of the hopper, so after installing one Broady Disk Mini on each of the two opposing sides of the remaining three sides and testing it, it was concluded that while there was an effect, it would be even better to install one on the last side as well. As a result, a total of three units were adopted, and the outcome was very favorable. 【Case Summary】 ■ Subject: Olefin-based thermoplastic elastomer crushed material (2mm to powder) ■ Hopper: Approximately 200×300 *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0514 Measures to prevent clogging of titanium dioxide

Easily solved with Brodisk! We will provide guidance on selecting models and arrangements that meet the user's requirements.

We would like to introduce a case where a user experiencing significant issues with the discharge of titanium oxide reached out to us. The size of the hopper in question is 500×500, and if the flowability of the powder is quite poor, it is generally recommended to use at least four blow discs (standard type: BD-15). Initially, four BD-20 type blow discs were adopted, and aeration was performed manually under various conditions. As a result, it was determined that it is preferable to sequentially turn on the air for each of the four blow discs with a time delay, and a controller (with four built-in solenoid valves) was adopted for this purpose. 【Key Points of This Equipment】 ■ The elastic disc (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone discs in our equipment are exceptionally strong and durable. Once you use them, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0515 Resolve the blockage in the transport piping.

Powder blockage in transport piping! Introducing a case study where the Brody Disk Mini was adopted.

We received a request from a customer stating, "Due to powder blockage in the transport piping, we would like to borrow 2-3 Brody Disk Minis." After installation and testing by the user, the blockage was resolved. However, at the same time, blockage occurred in another part of the same piping, so ultimately, by adding installations in this location as well, the problem was resolved, and the equipment was adopted. 【Case Overview】 ■ Target Material: Quicklime ■ Piping Overview ・Approximately φ150 ・Vertical to inclined 60° to vertical ■ Installation Position: Avoiding the lowest point on the circumference of the piping in the inclined section 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. Our silicone disk is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

disk Product List and Ranking from 52 Manufacturers, Suppliers and Companies | IPROS GMS

disk Manufacturer, Suppliers and Company Rankings

disk Product ranking