evaluation Product List and Ranking from 123 Manufacturers, Suppliers and Companies

[Analysis Case] Composition and Thickness Evaluation of Ultra-Thin SiON Films

Estimation of film thickness using the average free path of photoelectrons.

For extremely thin films with a thickness of a few nanometers or less, such as natural oxide films on silicon wafers and silicon nitride thin films, we will measure the Si2p spectrum of the sample's surface. By performing waveform analysis on the obtained spectrum, we will determine the proportion of each bonding state and estimate the film thickness from this result and the average free path of photoelectrons (Equation 1).

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Evaluation of Si Anode in Lithium-Ion Secondary Batteries

It is possible to evaluate the structure of the Si anode after charging through sample cooling.

Si is one of the candidates for high-capacity negative electrode active materials, but it is said to suffer from severe cycle degradation due to very large volume changes during charge and discharge. In this study, to confirm the state of the Si negative electrode after charging, we disassembled it under a controlled atmosphere environment and performed cooling FIB processing, followed by observing the cross-sectional shape using SEM. When observing the cross-section at room temperature, significant damage such as film contraction, roughness of the observation surface, and pore formation was observed. In contrast, by conducting the observation while cooling, we were able to suppress the alteration of the Si negative electrode and evaluate the original shape of the sample.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
Contract measurement
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Quality Evaluation of SiC Substrates

Evaluation of crystal orientation, in-plane defect distribution, surface roughness, and impurities.

SiC power devices are expected to reduce power loss and handle high power in a compact form as power conversion elements. The quality evaluation of SiC substrates, which is necessary for manufacturing these devices, has become a challenge. We propose a method to evaluate and quantify the crystal orientation, in-plane defect distribution, surface roughness, and impurities of SiC substrates, as well as to visualize these factors. Measurement methods: XRD, AFM, PL, SIMS Product fields: Power devices, lighting Analysis purposes: Trace concentration evaluation, structural evaluation, shape evaluation, failure analysis, defect analysis For more details, please download the materials or contact us.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Evaluation of Silicon Oxide Film by XAFS

Local structural analysis around silicon, quantification of intermediate oxides, evaluation of bulk and interfaces.

Silicon oxide films are widely used as gate dielectrics in MOS devices and as anode materials in lithium-ion secondary batteries, but it is known that the presence of intermediate oxides and the bonding states at the interface have a significant impact on device characteristics. XAFS measurements using synchrotron radiation can detect information from a depth of several tens of nanometers from the sample surface, allowing for non-destructive analysis of the structure and bonding states in both bulk and at the interface. This document presents a case study investigating the presence of intermediate oxides in silicon oxide films using XAFS.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Evaluation of Functional Groups in Graphene

Evaluation of functional groups in graphene is possible using thermal decomposition GC/MS method.

Graphene, a monolayer form of graphite, is expected to be applied in a wide range of fields such as batteries, transparent electrodes, and sensors due to its excellent properties, including toughness, high electrical conductivity, and high thermal stability. It is also said that the types and amounts of functional groups present on the surface vary depending on the manufacturing method, and clarifying its structure is an important point for improving performance. This case study introduces a comparison of the functional groups of two types of graphene using thermal decomposition GC/MS method.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
Transistor
Power storage device
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation of organic substances at the metal interface causing delamination.

TOF-SIMS can evaluate organic substances at metal interfaces in the depth direction.

Organic substances at metal interfaces can cause poor adhesion and delamination. For analyzing this poor adhesion, physically peeling off the layers and conducting qualitative analysis on the peeled surfaces is effective (refer to analysis case C0198). On the other hand, there are many cases where peeling cannot be performed, and in such cases, using a sputtering ion source for depth analysis is effective. This document presents a case of qualitative analysis of organic substances at metal interfaces, either in thin films or as secondary contamination, in the depth direction. As a conclusion, the presence of organic substances was confirmed by detecting C-series ions. Additionally, it is sometimes possible to identify organic substances by comparing them with known standard samples.

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Ingredient analysis
Other analysis and evaluation services
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation avoiding duplication of Oji Peak by HAXPES.

Comparison of spectra obtained from Ga line (HAXPES) and Al line/Mg line (XPS) measurements.

In HAXPES, hard X-rays (Ga radiation) are used for excitation, which results in different positions of the Auger peaks compared to the Al and Mg radiation typically used in standard XPS measurements. Therefore, even in samples where the photoelectron peaks and Auger peaks overlap in Al and Mg measurements, this overlap can be avoided in Ga measurements, allowing for a detailed evaluation of the bonding states. This document presents the spectra of Kovar (an alloy of Fe, Ni, and Co) and GaN measured using Ga radiation (equipped with HAXPES) and Al and Mg radiation (equipped with XPS).

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract Analysis
Contract measurement
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Analysis Case] Internal Structure Evaluation of Battery Components Using Nano-CT

Observe the fine structure inside the sample in three dimensions with a spatial resolution of 100 nm!

Nano-CT is a type of X-ray CT that uses synchrotron radiation as a source and allows for three-dimensional observation of the internal structure of samples with a spatial resolution of about 100 nm. This document presents a case study that visualizes the internal structure of battery components sealed in laminate film. Through nano-CT measurements, it is possible to confirm the fine structures and cracks of active materials that could not be captured by conventional micro-CT (spatial resolution of 1 μm or more).

Company：一般財団法人材料科学技術振興財団　MST
Price：Other

Contract measurement
Contract Inspection
X-ray inspection equipment
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation of the heating effects on plated parts using AFM/AES Auger electron spectroscopy.

We will conduct a multifaceted investigation of heating effects on plated components using AFM scanning probe microscopy and AES Auger electron spectroscopy.

The AFM scanning probe microscope is a device that detects various physical interactions occurring between the probe and the sample surface, allowing for the observation of surface shapes in minute areas and the measurement of electrical and mechanical properties. These physical interactions include atomic forces, frictional forces, and electrostatic forces. Additionally, measurements can be conducted in various environments, including atmospheric and vacuum conditions, enabling the observation of sample surfaces regardless of whether they are conductive or insulating. The AES Auger electron spectrometer allows for elemental analysis of the extreme surface layer of materials (approximately 5nm) and investigation of concentration gradients in the depth direction. Using these two analytical devices, we conducted a study on the heating effects on the surface of plated connector contact pins. Please take a moment to read the PDF materials. Furthermore, in addition to these analytical devices, our company also conducts various surface analyses such as XPS and GD-OES. We would be happy to assist you, so please feel free to reach out to us. Seiko Future Creation Official Website https://www.seiko-sfc.co.jp/ *Other materials are also available. If you request through the inquiry button, we will send them to you.

Company：セイコーフューチャークリエーション
Price：Other

Contract Analysis
Analysis Services
Plating Equipment
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conductivity evaluation of plated contact component surfaces 【DL available/AFM】

AFM can capture and measure extremely small surface topographies (roughness).

The AFM scanning probe microscope is a device that "detects various physical interactions between the probe and the sample surface, allowing for the observation of surface shapes in minute areas and the measurement of electrical and mechanical properties." These physical interactions include atomic forces, frictional forces, and electrostatic forces. Additionally, measurements can be taken in various environments, including atmospheric and vacuum conditions, enabling the observation of sample surfaces regardless of conductivity or insulation. Using this analytical device, we conducted an investigation into the "surface treatment of plated connector contact parts." Please take a moment to read the PDF materials. Furthermore, in addition to this analytical device, our company also conducts various surface analyses such as XPS, AES, and GD-OES. We would be happy to assist you, so please feel free to reach out. Seiko Future Creation Official Website https://www.seiko-sfc.co.jp/ *We have many other achievements as well. If you request through the inquiry button, we will send them to you.

Company：セイコーフューチャークリエーション
Price：Other

Plating Equipment
Contract Analysis
Electrical Instruments/Electrometers
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation of semiconductor insulating films using STEM/EDS.

STEM-EDS observation can confirm the shape and layer structure of the insulating film between semiconductor Poly-Si (polysilicon) and can be applied to investigate the causes of semiconductor defects.

In STEM (Scanning Transmission Electron Microscopy) and EDS (Energy Dispersive X-ray Spectroscopy), information regarding the composition of the sample (contrast images reflecting atomic numbers) can be obtained by scanning a finely focused electron beam over the sample. Additionally, the following features are available: - Observation of changes in diffraction contrast by varying the angle of incidence of the electron beam - Determination of whether the observation target is crystalline - Acquisition of information on crystal defects (dislocations, twins, etc.) within the crystal In this case, we introduce "Evaluation of Semiconductor Insulating Films using STEM-EDS." This case yielded no issues, but abnormal detection is also possible. Please take a moment to read the PDF materials. Furthermore, in addition to this STEM, our company excels in identifying defective areas by performing 3D reconstruction on specific regions of the sample in combination with FIB. We would be happy to provide a demonstration, so please feel free to reach out to us. Seiko Future Creation Official Website https://www.seiko-sfc.co.jp/ *Other materials are also available. If you request them through the inquiry button, we will send them to you.

Company：セイコーフューチャークリエーション
Price：Other

Semiconductor inspection/test equipment
Contract Analysis
Other semiconductors
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eurofins FQL Co., Ltd. | Business Information

Reliability evaluation, environmental testing, failure analysis, support for building and improving quality-related systems and processes, quality-related education, etc., specialists solve quality assurance challenges!

Eurofins FQL Co., Ltd. has its origins in the analysis division of Fujitsu Laboratories Ltd. and the quality assurance department of Fujitsu Ltd. It has been engaged in activities to improve product quality for a long time, not only in material analysis, reliability evaluation, safety assessment, and failure analysis, but also in supplier quality management and manufacturing plant audits. Additionally, it contributes to solving challenges faced by organizations responsible for quality through the development and educational support of personnel involved in quality, as well as the construction and improvement of quality management, product chemical substance management systems, and software development processes. ■ Reliability Evaluation and Environmental Testing Various reliability evaluations, safety verification of secondary batteries, power supplies, etc., including smoke and fire hazards. Evaluation of special environments such as weather resistance and gas corrosion. ■ Failure Analysis Failure analysis of electronic components and devices, confirmation of characteristics related to materials, and detailed analysis of defects. ■ Support for Building and Improving Quality-Related Systems and Processes To achieve QCD (Quality, Cost, Delivery) goals, we support the improvement of development processes using models such as CMMI and Automotive SPICE. ■ Quality-Related Education Customizing educational programs for needs such as "wanting to energize the organization," "wanting to cultivate a quality mindset," and "wanting to provide quality education for new employees."

Company：ユーロフィンFQL
Price：Other

Contract Analysis
Contract measurement
Contract Inspection
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Survey Environmental Assessment

Environmental assessment (environmental impact assessment) is an important method for maintaining a rich natural environment and a comfortable living environment.

In the world, there are various development projects, but in order to avoid development projects that ignore the natural environment and living conditions, we will predict and evaluate the impacts of development on the natural and living environments, and conduct assessments to determine whether the project plans are appropriate.

Company：兵庫分析センター
Price：Other

Other analyses
evaluation

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Practical Food Safety Statistics: Quality Control and Risk Assessment Using R and Excel

Using R and Microsoft Excel, this explains the statistical approach to food safety and quality management methods in relation to food risk.

Knowledge of statistics is important for managing food safety and quality, and especially now, the entire food industry is required to implement quantitative management incorporating HACCP plans and risk assessments. 1: Basics of Statistics 2: Statistical methods necessary for food safety and quality management This book provides a detailed explanation of these topics. The accompanying programs (R, Excel) can be downloaded from the NTS website, allowing for verification of knowledge acquisition.

Company：エヌ・ティー・エス
Price：10,000 yen-100,000 yen

Technical and Reference Books
Other safety and hygiene products
Food storage equipment and facilities
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measurement of food texture and taste evaluation

A systematic and practical explanation of food texture fundamentals, food development, cooking, and processing!

◇ "Texture," which is extremely important in determining the deliciousness of food!! ◇ A systematic and practical explanation from the basics of food development to cooking and processing! - The physical structure and rheology of food for accurately measuring texture - Sensory testing and data analysis to match psychological sensory quantities - Development of solid foods, special structures, and foods for the elderly - Cooking, processing, and new texture foods

Company：エヌ・ティー・エス
Price：10,000 yen-100,000 yen

Technical and Reference Books
Viscometer
Food Processing Equipment
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DJK Material Property Evaluation

This is a testing service for evaluating the basic physical properties of polymers and other materials.

From the fundamental property evaluation of new materials developed by our customers to product quality control, various physical property evaluation tests are possible. Our main measuring instruments are regularly calibrated to ensure constant traceability, and we can accommodate a wide range of tests from standard-compliant tests (JIS, ISO, ASTM) to non-standard tests.

Company：ＤＪＫ
Price：Other

Other polymer materials
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tajima Motor Corporation Wind Tunnel Testing, Component Evaluation

We accept orders for aerodynamic testing and evaluation for two-wheeled and four-wheeled vehicles, heat exchanger and shroud testing and evaluation, and the production of wind tunnel testing equipment.

We can consistently undertake everything from planning and manufacturing scale models of vehicle bodies and full-size partial models to experimentation, measurement, and evaluation. We can measure the wind speed around heat exchangers and evaluate the heat exchangers as well as the shrouds and cooling fans. We manufacture wind tunnel equipment, including the wind tunnel body, based on our own designs. In particular, we also design and manufacture moving belts, which are considered effective in automotive wind tunnel experiments, and we can design and manufacture moving belts for existing small wind tunnels. Additionally, we offer consulting services based on our extensive experience with model experiments.

Company：タジマモーターコーポレーション静岡磐田R&Dセンター
Price：Other

Vehicle body parts
Contract Inspection
evaluation

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tajima Motor Corporation Powertrain Parts Development Evaluation

Prototype of engine assembly, piston, crankshaft, connecting rod, camshaft, durability testing of engine parts, machining using a composite processing machine.

We can undertake the design, prototyping, testing, evaluation, and development of various automotive powertrain components. When you want to prototype parts due to specification changes, complex machining using a 5-axis multi-tasking machine is possible. If you want to carry out small-scale prototyping due to specification changes, we can also accept orders for machining parts using a machining center or finishing processing of cast materials.

Company：タジマモーターコーポレーション静岡磐田R&Dセンター
Price：Other

Drive system parts
Engine parts
Contract manufacturing
evaluation

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sensor evaluation

Select a sensor, find an evaluation kit, and start the evaluation! We will also introduce how to use it.

At Sensirion AG, you can quickly and easily start testing Sensirion sensors using the evaluation kit. Our sensor products are bundled in the evaluation kit, so please refer to the product detail pages in the catalog for what you need for evaluation. Additionally, links to the accessories and viewer software required for evaluation can be found on the product detail pages of the sensors and the category page for evaluation kits. 【Sensor Evaluation by Product Category (Partial)】 ■Humidity ■CO2 ■VOC ■Formaldehyde ■Particulate Matter *For more details, please check the related links or feel free to contact us.

Company：センシリオン
Price：Other

Analytical Equipment and Devices
evaluation

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Material investigation: analysis, strength characteristics, physical properties, and structural evaluation.

This is a service that sends a report on the investigation and consideration of causes from a comprehensive perspective.

In the "Material Investigation" service, we evaluate the components, hardness, strength, and structure of materials that customers wish to examine, as well as issues such as damage, corrosion, and foreign matter adhesion. We conduct analyses of data, strength characteristics, physical properties, or structural evaluations to investigate and report the causes from a comprehensive perspective. We investigate various issues such as damage, wear, and corrosion using state-of-the-art equipment to determine their causes. 【Investigation】 - SEM observation - Microscope observation - Metallographic microscope observation - Residual stress measurement For more details, please contact us or download the catalog.

Company：キグチテクニクス
Price：Other

Contract Analysis
Contract measurement
Contract Inspection
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flux residue analysis, defect cause investigation, cleanliness evaluation.

Support for identifying defects and resolving quality issues in the manufacturing site!

Our company conducts residue analysis to examine contaminants such as flux and sinter. We support the identification of defect causes and the resolution of quality issues in the manufacturing process through our expertise in flux cleaning, analysis, and know-how. We also conduct defect cause investigations to isolate the causes of issues such as assembly defects, as well as cleanliness evaluations to check the cleanliness and residue levels on circuit board surfaces. 【Features】 ■ Residue analysis to identify the presence and type of substances adhered to surfaces ■ Defect cause investigations analyzing foreign substances and causes using analytical equipment and expertise ■ Cleanliness evaluations for process management through regular analysis ■ Proposals for countermeasures and improvements in addition to analysis results ■ Cleanliness analysis is also possible for flux cleaning agents and circuit boards from other manufacturers ■ Cleanliness verification methods compliant with ISO 9455-18:2024 *For more details, please download the PDF or feel free to contact us.

Company：ゼストロンジャパン
Price：Other

Contract Analysis
evaluation

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measurement and evaluation of microfabricated products.

We offer a minimum half-day estimate and propose to reduce the burden of inspections by utilizing us as an external measurement company.

In the field of microfabrication, it is difficult to apply contact measurement instruments (calipers, micrometers, three-dimensional measuring machines) to the target objects. Therefore, our company uses non-contact image dimension measuring instruments. We have two models of "Keyence Image Dimension Measuring Instruments": IM-8000 and IM-7030. By illuminating the object and measuring its shadow, we can achieve high-precision measurements even for small parts and fine processing areas. We can simultaneously measure the height and depth of the target object. Additionally, we can measure up to 99 locations at once, allowing us to measure pitch and depth even for finely slotted items like heat sinks. For the measurement and evaluation of microfabricated products, please leave it to Agency Assist. We also accept measurements and evaluations of dimensions and geometric tolerances, including three-dimensional measurements, roundness, and surface roughness. For details on our equipment lineup and services, please refer to the "Company Profile." From metals to plastics, we are ready to handle cutting and processing of prototype and development parts.

Contract measurement
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrical interface evaluation based on TS 26.131/132

It includes all measurements of 3GPP TS 26.131/132 for the evaluation of digital and analog electrical interfaces.

UG TS 26 EL ITF Test (Code 60065) is an upgraded version of the automated test suite TS 26 131-32 (Code 6777). It includes all measurements related to 3GPP TS 26.131 and 3GPP TS 26.132 for evaluating digital or analog electrical interfaces. The electrical interfaces are defined and specified in Chapter 3.1 of 3GPP TS 26.131 and 3GPP TS 26.132. The signal path for the measurements is entirely electrical. Specific measurement equipment simulates a headset and connects to the electrical interface of the mobile device. Measurements conducted with this test suite evaluate the signal processing of the mobile device without being affected by the connected headset or acoustic interface. HEAD acoustics provides hardware and software solutions for performing the measurements of this test suite.

Company：ヘッドアコースティクスジャパン
Price：Other

Time-frequency measurements
Acoustic Analysis
Communications
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis (Chemistry/Physics) - Property Evaluation - Material Evaluation

We offer STEM, TEM, and SEM observations, various analyses, defect analysis, stress analysis, and more.

We would like to introduce our services related to "Analysis (Chemistry/Physics), Property Evaluation, and Material Evaluation." We provide analysis services for defect analysis, including microscopic inspection and spectral analysis. From individual researchers and entrepreneurs to large corporations, please make use of our company for technology development in various fields such as semiconductor technology, nanotechnology, biotechnology, and clean energy. 【Service Contents】 ■ STEM, TEM, SEM Observation ■ Various Analyses ■ Defect Analysis ■ Stress Analysis *For more details, please refer to the PDF materials or feel free to contact us.

Company：ティーイーアイソリューションズつくば研究所
Price：Other

Other contract services
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pre-production evaluation of automotive parts requires prototypes close to mass production using ADC12!

Attention automotive industry professionals! For pre-production evaluation of die-cast products, prototypes that closely resemble mass-produced items are recommended using "ADC12" and "excellent processing technology"!

In the pre-evaluation of mass-produced die-cast products, there is an increasing trend to use "ADC12 material" to create prototypes with quality close to that of mass-produced items. However, due to variations in performance and delivery times depending on the technical level, it is necessary to find processing companies with proven technology and experience. 【Common concerns with prototypes made from ADC material】 - We are prototyping with gypsum cast products, but the shape accuracy of the cast surface is poor, which may affect the evaluation. - There is interference between parts, making assembly impossible, so we want to trim the interfering parts to enable assembly. - Design changes have piled up, shortening the prototype delivery time. There is a possibility of delays in subsequent processes. → Ishitobiteko will solve the above concerns based on its extensive processing experience in the automotive and machine tool industries! ◆ With Ishitobiteko... - We use mold processing machines for part machining, providing high-precision prototypes with minimal variation! - We can accommodate urgent additional processing! Both gypsum cast products and machined parts are acceptable. If jigs are available, next-day delivery is also possible! - We have a track record of production in as little as three days! We can also deliver only the necessary quantities for evaluation in advance! *For more details, please download the materials and take a look.

Company：石敏鐵工
Price：Other

Processing Contract
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mechanical Fixation Plate 'EG Fixation Plate' SABTEC Evaluation

No grout material needed for easy installation! Compact! A mechanical anchoring plate that reduces installation time and labor.

The 【EG anchoring plate】 is a mechanical anchoring plate that allows for the anchoring of rebar simply by tightening a circular plate by hand. No grout material is required. 〇 (Foundation) Architectural Structural Technology Support Organization (SABTEC Evaluation 12-05) 【Features】〇 Can be installed using only hand tightening, reducing construction time and labor 〇 No grout material required 〇 Allows for the attachment and detachment of the anchoring plate on-site 〇 Compact and fits well 〇 All stress transfer occurs through steel, providing high structural reliability 〇 No industrial waste generated as no grout material is used * Godo Seiko Co., Ltd. and Asahi Kogyo Co., Ltd. merged in 2019 to become "Kanto Daybars Steel Co., Ltd." * For more details, please contact us or download the PDF. If you would like the full design guidelines, please contact us.

Company：合同製鐡株式会社
Price：Other

Steel
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation of "Electron Spin Resonance Method"

You can compare antioxidant capacity based on concentration and measure in vivo antioxidant capacity!

EPR (Electron Paramagnetic Resonance) is the only direct measurement method for reactive oxygen species. This phenomenon was discovered by the Russian physicist Zavoisky, and it allows for the measurement of reactive oxygen species and antioxidant capacity in various situations and states. Furthermore, we can create and measure protocols tailored to your needs, so please feel free to consult with us. [Features] ■ Direct measurement method ■ Ability to create and measure protocols according to application *For more details, please contact us or download the catalog.

Company：バイオラジカル研究所横浜事務所
Price：Other

Other measurement and measuring equipment
Other analysis and evaluation services
evaluation

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

evaluation Product List and Ranking from 123 Manufacturers, Suppliers and Companies | IPROS GMS

evaluation Manufacturer, Suppliers and Company Rankings

evaluation Product ranking