We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

heater Product List and Ranking from 467 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

heater Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. 日本ヒーター Tokyo//Industrial Electrical Equipment
  2. 西都電機 Osaka//equipment
  3. トーコー Saitama//Industrial Machinery
  4. 4 新日電熱工業 Osaka//Machine elements and parts
  5. 5 エクセリタスノーブルライトジャパン Tokyo//Industrial Electrical Equipment
Go to Company Ranking

heater Product ranking

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. Near-infrared paint dryer Promo Series [Immediate heating of the irradiation section is possible] トーコー
  2. From room temperature to 1200°C in about 150 seconds! High-speed high-temperature cartridge heater. 三洋熱工業
  3. For autonomous driving sensors! Film heaters to prevent malfunctions caused by snow accumulation.
  4. 4 "Everything You Need to Know About Heaters: Frequently Asked Questions" *Free Gift* 新日電熱工業
  5. 4 What is a seed heater? 中日電熱

heater Product List

1096～1110 item / All 2529 items

Displayed results
Characteristics of far infrared rays

Characteristics of far infrared rays

Efficient direct heating through radiative heat transfer with wavelengths from 3μm to 1000μm.

Far infrared rays have the characteristic of directly heating objects by utilizing radiative heat transfer. Infrared rays are a type of electromagnetic wave, like radio waves and visible light, and are invisible electromagnetic waves with longer wavelengths than visible light. The range of infrared wavelengths is from 0.8μm to 1,000μm, and the range with wavelengths longer than 3μm is called far infrared. Heating of objects by far infrared means that the absorption of far infrared rays causes the molecules that make up the object to vibrate. Many objects around us (such as polymers like plastics, rubber, paints, fibers, and food) have absorption bands in the wavelength range of 2.5μm to 30μm, allowing far infrared to efficiently heat them. 【Characteristics of Far Infrared】 ■ Efficient heating through direct heating ■ Increased productivity by reducing heating time ■ Uniform heating of the entire object, preventing uneven heating due to color variations, thus enhancing the quality of the heated items ■ High controllability, allowing for precise distribution in flat areas, variations in height, and time accuracy ■ No exhaust gases, dust, or dirt generated, making it a clean and safe heating source *For more details, please refer to the related links or feel free to contact us.

  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Titanium CH-type heater

Titanium CH-type heater

Adopts a titanium case with excellent corrosion resistance!

We would like to introduce our "Titanium CH Type Heater." We have adopted a titanium case with excellent corrosion resistance for the CH type, which is suitable for clean rooms. It is ideal for heating processes in environments where stainless steel is prone to corrosion. We can provide sizes identical to the conventional CH type. 【Dimensions (mm)】 ■100×400 ■200×400 ■300×400 *For more details, please refer to the related links or feel free to contact us.

  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Panel-type infrared heater "Infrared ST type"

Panel-type infrared heater "Infrared ST type"

A ceramic heater created from years of experience! Achieving high emissivity far-infrared radiation.

We would like to introduce our panel-type infrared heater, the "Infrared ST Model." Made from porcelain ceramic, it achieves high emissivity far infrared radiation. The ceramic parts on the back of the heater block excess heat. Please feel free to contact us if you have any inquiries. 【Dimensions】 ■100×400 ■200×400 ■300×400 We also accommodate custom sizes and custom mounting brackets, so please consult with us. *For more details, please refer to the related links or feel free to contact us.

  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Panel-type far-infrared heater "Infrared CH type/ST type"

Panel-type far-infrared heater "Infrared CH type/ST type"

Years of proven results! Ideal for drying processes in precision equipment manufacturing and coating.

We would like to introduce our panel-type far-infrared heaters, "Infrared CH Type/ST Type." The "Infrared CH Type" features a special ceramic surface treatment that ensures complete dust-free operation even at high temperatures. It has no heater junction frame, achieving uniform temperature distribution. The "Infrared ST Type" utilizes porcelainized ceramic, enabling high emissivity far-infrared radiation. The ceramic parts on the back of the heater block excess waste heat. *For more details, please refer to the related links or feel free to contact us.*

  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
About halogen heaters

About halogen heaters

Evaporation, condensation, movement, and decomposition of the halogen cycle! Introducing our "Halogen Heater."

We would like to introduce the "Halogen Heater" that we handle. The heater structure consists of a light-emitting tube, filament, holding ring, base, sealing part, and lead wires. It operates on the principle of thermal radiation generated by Joule heating when current flows through the conductor. Please feel free to consult us when you need assistance. 【Halogen Cycle】 ■ Evaporation - When lit, the temperature of the filament rises, causing tungsten to evaporate. ■ Condensation - Tungsten molecules condense with halogen molecules near the inner wall of the quartz tube. ■ Movement - The bonded molecules move towards the filament due to convection. ■ Decomposition - When the temperature near the high-temperature filament exceeds 1,400°C, they separate into halogen and tungsten. The tungsten returns to the filament, and the freed halogen molecules float and repeat the reaction of condensing with tungsten molecules near the inner wall of the quartz tube. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater manufacturing examples

Heater manufacturing examples

We manufacture various types of halogen heaters and cantal heaters! Here are examples of our heater production.

We would like to introduce our heater manufacturing examples. In addition to "halogen heaters" such as straight tube type, 3D type, ring type, half-circle type, and spiral type, we also manufacture "cantal heaters" in L-shaped type, spiral type, and flat type. Please feel free to consult us when you need assistance. 【Overview of Examples】 ■ Manufactured Products - Halogen Heaters: Straight Tube Type, 3D Type, Ring Type, Half-Circle Type, Spiral Type - Cantal Heaters: L-Shaped Type, Spiral Type, Flat Type *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-crusher

Multi-crusher

A device that automatically processes crushing and discharge!

The "Multi Crusher" is a device that automatically processes the crushing and discharging of materials supplied to five high-speed mills located on a rotating table via a hopper and conveyor belt. By utilizing the advantages of high-speed mills and employing multiple units, it achieves processing capabilities comparable to mass production machines. Additionally, it features a mechanism that allows for easy attachment and detachment of cutters and containers, making post-operation cleaning simple. Please feel free to contact us if you have any inquiries. 【Basic Specifications (excerpt)】 ■ Power Supply: 3-phase 200V (50/60Hz) ■ Drive Motor Capacity: 1.5kw x 5 units ■ Crusher Rotation Speed: 10,000rpm ■ Number of Crushers: 5 units ■ Processing Capacity (specific gravity 1): When using 5 units (max. 100kg/hr.) *For more details, please download the PDF or contact us.

  • Crusher

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kiln furnace

Kiln furnace

Drying and sterilization can be performed while stirring! An alarm will sound when the drying progresses and the product temperature reaches the set temperature.

The device is designed to dry and sterilize food ingredients by mixing them while injecting superheated steam gas into the chamber. Ingredients are fed into the device by opening the upper hatch and using a screw conveyor or other transport mechanism. After processing, the discharge is done by opening the front hatch, and the mixing blades are rotated in the forward direction to allow the materials to exit from the discharge port to the shooter. The exhaust containing airborne powder is separated into gas and powder using a cyclone, with only the gas passing through the blower and being released into the atmosphere. 【Basic Specifications (Partial)】 ■ Power Supply: 3-phase 200V (50/60Hz) ■ Drive Motor Capacity: Gear motor 0.2–1.0 kW (for mixing) + 0.4 kW for the induction blower ■ Operating Temperature (inside the chamber): 350℃–500℃ * Exhaust gas temperature from the superheated steam device ■ Chamber Volume: 0.3–1.0 m³ * Maximum input amount is approximately 1/3 of the volume ■ External Dimensions: L800×W1672×H1602–L1340×W2377×H1935 (mm) * For more details, please refer to the PDF document or feel free to contact us.

  • Mixer/agitator
  • Drying Equipment
  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gas separation type surface heating heater 'HFC-Ox'

Gas separation type surface heating heater 'HFC-Ox'

A surface heater with excellent uniform heating properties!

The "HFC-Ox" is a gas separation type surface heating heater that uses C/C composites (carbon-carbon composites) completely covered with quartz glass, capable of heating up to 1,000°C in an oxidizing atmosphere. It is mainly suitable for integration into thin film devices (such as CVD/sputtering) and semiconductor manufacturing equipment (such as substrate heating/flash annealing). 【Features】 ■ Capable of heating up to 1,000°C in air or oxidizing atmosphere ■ Designed with chemically stable quartz glass, making it less susceptible to environmental influences ■ Extremely low contamination generation, allowing for clean operation ■ The C/C composite material used for the heater has a small heat capacity, is resistant to vibration, shock, and thermal shock, and allows for rapid heating and cooling ■ Compact design that does not take up much space *For more details, please download the PDF or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface Heating CC Heater

Surface Heating CC Heater

For incorporation into thin film devices and semiconductor manufacturing equipment! Surface heaters capable of heating to over 1200°C.

The "Surface Heating CC Heater" is a thin and compact product that uses C/C composite (carbon-carbon composite) as its heat source. By using C/C composite, it is possible to achieve high temperatures that are difficult to reach with plate heaters using sheath heaters. Additionally, since heating is performed on a susceptor installed above the heater, uniform heating can be achieved, allowing for temperature increases of up to 400°C in the atmosphere and over 1200°C in a vacuum or inert gas environment. 【Features】 ■ Uniform heating with a susceptor ■ Realization of high-temperature heating ■ Advantages of using C/C composite material *For more details, please refer to the PDF document or feel free to contact us.

  • Ceramic Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-temperature sheath heater

High-temperature sheath heater

Heater wire capable of reaching temperatures up to 900℃! Flexible processing is possible.

The "high-temperature sheath heater" is a product that has a metal protective sheath covering an electric heating wire. Since the heating wire is insulated by the protective sheath, it can be used as a heat source for various applications. In addition to bending processing, we also directly wrap it around conductive containers and heated objects. Please feel free to consult us regarding shapes, dimensions, etc. 【Features】 ■ Flexible bending processing ■ Direct wrapping around heated objects ■ Terminal processing for specific applications *For more details, please refer to the PDF materials or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sheath heater with cold end

Sheath heater with cold end

Prevention of troubles due to high temperatures at terminal connections! A sheath heater that does not cause heat generation at the connection part.

The "Sheath Heater with Cold Ends" is a product among the sheath heaters we handle, featuring non-heating low-temperature lead-out sections (cold ends) at both ends of the heating element. It can achieve temperature increases up to 900°C, similar to regular high-temperature sheath heaters, while both ends remain relatively low in temperature, reducing issues at the terminal connection points where components are connected. Additionally, the lengths of the heating and non-heating sections can be specified as desired. 【Features】 ■ Ends at 50°C or below ■ Can be processed similarly to high-temperature sheath heaters *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Furnace heater reinforced with carbon fiber 【*Material samples available】

Furnace heater reinforced with carbon fiber 【*Material samples available】

If you are concerned about the durability and temperature unevenness of in-furnace heaters, please consult us. We offer a balance of machinability like graphite and high thermal shock resistance and impact resistance.

Kureha Trading has started handling the "C/C Composite Heater," a furnace heater made from a carbon matrix reinforced with carbon fibers. The "C/C Composite Heater" possesses characteristics derived from carbon fibers, such as high strength and heating/cooling properties, while also achieving processability similar to graphite heaters. It can be designed and processed to match the shape and resistance values of the furnace. 【Recommended for those with the following concerns】 ◎ Experiencing issues with temperature unevenness and brittleness due to heater shape and material ◎ Unable to find alternatives due to manufacturer consolidation or discontinuation ◎ Heaters getting damaged from impact during installation ◎ Wanting to reduce heating and cooling times *This product is in development. For more details, please refer to the materials available for download in the catalog. If you would like a material sample, please feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seed heater

Seed heater

A rod heater that can be bent into various shapes to suit your needs!

The "sheath heater" is a rod-shaped heater that encloses a spiral-wound heating wire (nichrome wire) within a metal pipe, insulated with magnesia powder. Power terminals (M5 bolts) extend from both ends, allowing for a bendable structure. It can be bent into shapes that match the heating target. Primarily, it is used as a heat source for dryers and electric furnaces for air heating, but it can also be used for heating liquids (water, oil, chemical solutions, etc.). 【Features】 ■ The spiral-wound heating wire (nichrome wire) is enclosed in a metal pipe and insulated with magnesia powder. ■ Power terminals (M5 bolts) extend from both ends. ■ It can be bent into shapes that match the heating target. ■ It can be widely utilized in various shapes according to application needs. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Band heater

Band heater

The maximum operating temperature is 350°C! A cylindrical heater that can be bent to match the shape of the target object.

The "band heater" is a cylindrical heater made by bending a plate heater into a cylindrical shape, which can be mounted using a stainless steel band on the outside. Basically, it comes in 1P or 2P types, but larger diameters may have 3P types or more. Like plate heaters, it is also possible to perform hole processing or notching in advance. Additionally, shapes such as oval, barrel, or polygon can be manufactured to match the heating target. 【Features】 ■ Can be mounted using a stainless steel band on the outside ■ Like plate heaters, it is possible to perform hole processing or notching in advance ■ Shapes such as oval, barrel, or polygon can be manufactured to match the heating target ■ The 1P type is formed from a single heater into a circular shape ■ The 2P type is formed from two heaters, and the opening can be accessed by removing the tightening band *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to heater

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.