Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 1802 items
Ultra-thin ring light can be mounted on φ16 telecentric lens.
Ideal for φ16 telecentric lenses! Compact ring lighting optimized for φ16 telecentric lenses. Can be installed without worrying about space due to its slim design. Designed with an inner diameter of 16mm to fit the barrel diameter of φ16 telecentric lenses.
Low-angle ring lighting that gathers strong oblique light for close-range work.
Optimal for defect inspection and edge detection. The bullet-shaped LED element is mounted at a large tilt angle, gathering strong oblique light for close-range work with low-angle ring lighting. It can be used at close distances to the workpiece and is effective for three-dimensional recognition of edge chipping and unevenness. A diffusion ring can be easily screwed on to prevent reflections from glossy workpieces and elements.
Horizontal opposed ring lighting with cannonball-shaped LED elements mounted sideways.
Emphasizes unevenness with illumination from the horizontal direction. It can illuminate the workpiece from the side, making it effective for inspecting dents, engravings, and edges. A diffusion ring can be added later. It can also be used in combination with dome lighting.
Indirect lighting with LEDs mounted around the perimeter of a ring-shaped light guide plate.
Uniform illumination of glossy and uneven workpieces. The structure makes it difficult for LED elements to reflect on the workpiece, making it ideal for visual inspection of glossy workpieces like bottle openings. It is effective for uneven workpieces as well, as it provides uniform illumination with indirect light.
Slim, energy-saving, low-heat uniform surface lighting with a thickness of "minimum 6mm," allowing for space-saving installation.
By revising the structure of the light guide plate emission method, the height of the lighting has been reduced to 6mm or less (with the emission part at 5mm), making it even thinner than conventional products. It can be installed without worrying about the installation space of the device. The LEDs emit light from the surroundings, resulting in low power consumption. It can be used for a wide range of appearance inspections as backlight lighting. If the brightness of the IFLA series is insufficient, please consider the IHM series or IDHM series.
Thin surface light can be produced in multiples of 30mm.
High brightness and high uniformity thin surface-emitting backlight lighting suitable for a wide range of visual inspections. With chip LEDs arranged in high density, it offers higher brightness and uniformity than the IFL series. Available in various sizes, it can be produced in multiples of 30mm x 30mm. For large backlight lighting needs of 200mm x 200mm or larger, please consider the IFPA series.
Adoption of chip LEDs for transparent lighting achieves high output, lightweight, and low cost.
High-brightness transmission lighting evolved further from IHM. Chip-type transmission lighting achieves low cost, high output, and lightweight design. The product lineup includes 5 sizes of square-like shapes ranging from small to large, as well as 4 sizes of rectangular shapes, totaling 9 sizes.
Thin perforated surface lighting capable of imaging through reflection rather than transmission.
Adopting chip-type elements, achieving high output and lightweight design. By providing a φ40mm opening, imaging is possible through reflection rather than transmission. The product lineup includes three sizes of square approximate shapes, ranging from small to large. The emission colors available are white, red, and blue.
8mm thin and lightweight dome lighting, providing uniform illumination as there is no camera window.
Brighter and clearer A space-saving, lightweight, thin 8mm dome light without a camera window. It provides uniform illumination across the entire area. Compared to the conventional IFH series, it is about six times brighter, with improved uniformity and clarity. Even at close distances to the workpiece, imaging can be done without interference from troublesome reflections.
Reflective high uniformity and high brightness dome lighting
The NEO series has been brightened and is now newly available! By utilizing the hemispherical inner surface reflection, it emits uniform diffused light, reducing halation that easily occurs with direct light on uneven or glossy surfaces, allowing for shadow-free, uniform images. It is possible to capture curved or stepped workpieces as flat images. A large dome with a maximum diameter of 350mm is adopted, making it capable of accommodating larger workpieces that conventional small dome lighting could not handle. Compared to the previous NEO dome lighting, the blue light output has increased by about four times, while the white and red light outputs have increased by about two times, enabling faster inspections.
Combining red, blue, and green LEDs into a single lighting unit.
The blending of emission colors can be freely adjusted according to the inspection purpose. With a combination of three wavelengths—red, blue, and green—it provides full-color visible light illumination, covering a very wide wavelength range. Since each wavelength can be dimmed independently, subtle composite lighting colors are achievable.
Dome lighting that achieves strong illumination from all directions.
The inner surface of the bowl is equipped with LEDs, allowing for strong illumination from all angles. Additionally, by attaching a diffusion dome as an option, it is possible to achieve strong diffused light that minimizes reflections on spherical workpieces. There are also types that allow for multiple rows of LEDs to be divided into several circuits vertically, enabling independent dimming. We also accept requests for the integration of coaxial downlighting separately.
Dome lighting capable of irradiation from 16 directions, clearly capturing hard-to-detect scratches and dents with segmented illumination.
16-segment illumination with 4 directions and 4 levels Flexible illumination is possible with 16-segment illumination in 4 directions and 4 levels. Even difficult-to-detect scratches and dents can be captured clearly. No need to select lighting based on workpiece shape.
Uniform irradiation of spherical, uneven, and long workpieces; full-color version also released.
It is possible to inspect the workpiece in a tunnel style while covering it with lighting. It is universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Of course, combinations of dome, low angle, and coaxial can be used for various applications depending on the combination of wavelengths. It is ideal for sharp edges of elongated workpieces. By adopting power LEDs, sufficient light output can be obtained even with indirect lighting. The LED mounting part is designed as a heat sink, allowing for use even in constant light.
Cube dome lighting for conveyor picking provides uniform illumination even on uneven surfaces.
Uniform illumination for uneven and long workpieces. Inspection can be performed in a tunnel style while covering the workpiece with lighting. Universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Ideal for sharp edges of elongated workpieces. Sufficient light output is achieved even with indirect lighting. The LED mounting section is designed as a heat sink, allowing for use in constant light conditions.
Pseudo-coaxial downlight illumination that achieves high brightness, high uniformity, and a compact housing.
It is possible to illuminate along the same axis as the camera axis using a half mirror. Since inspection can be performed with specular reflection, it is effective for checking fine surface scratches, printing, and text. It can be used for a wide range of applications, such as pattern inspection of substrates and measuring the pitch of connector pins.
High brightness version of the pseudo-coaxial incident illumination IFV series.
Ideal for mirror surface work. A high-brightness version of the conventional pseudo-coaxial illumination IFV series. Perfect for workpieces that could not be used with the previous pseudo-coaxial illumination due to low brightness. The brightness is about 3 to 5 times that of the conventional model in white, and about 7 to 9 times in blue.
Pseudo-coaxial and straight pseudo-coaxial uniform illumination lighting.
Ideal for mirror work. It can be illuminated along the same axis as the camera axis using a half mirror. Inspection with specular reflection is possible, making it effective for checking fine surface scratches, printing, and text. It can be used for a wide range of applications, such as pattern inspection of substrates and measuring the pitch of connector pins.
Ultra-high brightness coaxial lighting
Can be inserted into telecentric lenses and used as coaxial reflected illumination. Ideal for positioning in the manufacturing of LCDs, semiconductors, and electronic components. Various lineups available, including ultra-high brightness types and compact Type IV series to suit different applications. Please use the RBOX series when utilizing the DC12V output power supply of the IHV series or overdrive.
Spot lighting that can adjust its irradiation range according to the application.
Achieves brightness equivalent to halogen Flexible illumination range from point light to long-distance projection Uses power LEDs, capable of achieving over 1,000,000 Lux with a φ5mm spot light when focused. Please use the RBOX series when utilizing DC12V output power supply or overdrive.
High Brightness Red Standard Lighting
Renewal of Red Standard Lighting! The conventional bullet-type LED red standard lighting has been renewed to high brightness and high quality. *Excludes some models. The external dimensions and installation dimensions remain the same, allowing for even wider applications.
Lighting for phosphor excitation equipped with high-output UV LED.
Lighting equipped with high-output UV LEDs optimal for exciting phosphors. Available in Long Type and Short Type to choose the irradiation distance. Standard wavelengths are 365nm and 385nm, with custom options available for 375nm, 395nm, 405nm, and others. Diffusion plates can be attached. As an option, diffusion plates/transparent plates compatible with ultraviolet light can be installed. Two types are available: a diffusion plate with a transmittance of 85% and a transparent plate with a transmittance of 100%.
Long-wavelength infrared lighting
Ideal for inspections that are difficult with conventional infrared lighting. Infrared lighting using bullet-shaped LEDs with a longer wavelength than conventional 850nm infrared lighting. Inspections that were previously challenging, such as foreign object detection and moisture visualization within the workpiece, are now possible. Please also consider the Infrared series and the high-output Infrared2 series.
Industry-leading brightness! Achieves up to 8 million lx (※ ISSDBA-C90/20W, LWD=30mm)
By combining with a dedicated power supply, compared to lighting of the same shape and similar size, we achieve a steady light ratio of 16 to 137 times and a conventional strobe ratio of 3 to 25 times! This super strobe lighting maximizes the LED element specifications through an original design that utilizes power LEDs. *Not suitable for continuous lighting use. Please use the dedicated power supplies IJS-SS series or ILS-SS series.
Overdrive dedicated lighting
Achieves up to 26 times brightness compared to constant light! Synchronizes the camera shutter time to emit bright light instantaneously. This is a dedicated lighting system designed for overdrive, maximizing the LED element specifications through an original design that uses power LEDs. *Not suitable for continuous lighting use. Please use the dedicated power supply SAG2 series, SAG-TP series, SAG-HP series, or IJS series.
GigE Vision compatible lighting controller
The GigE Vision Interface makes installation and operation as easy as a camera! This is the first lighting controller from a domestic manufacturer to support the general software interface standard GenICam. It allows control of other companies' cameras and lighting equipment using the same commands from applications compatible with GigE Vision/GenICam.
A multi-channel model with flexible irradiation from 8 divisions.
8-channel split lighting from a low angle. By individually illuminating workpieces that are prone to halation from eight directions and synthesizing the resulting images, it is possible to capture images while suppressing halation. It is also ideal for appearance inspection of uneven workpieces.
A multi-channel model with flexible irradiation from 8 divisions.
8-channel split lighting with a horizontal orientation. By individually illuminating workpieces prone to halation from 8 directions and synthesizing the resulting images, it is possible to capture images while suppressing halation. It is also ideal for the appearance inspection of uneven workpieces.
Debut! Launch of Smart Vision lights for inspection in the logistics industry.
Reimac will sell SmartVisionLights products from the American company "SmartVisionLights" as their Japanese distributor. SmartVisionLights (hereinafter referred to as SVL) is a company that develops products primarily focused on high-speed/high-output lighting for logistics. ■ Unique Features of SVL, Built-in Controller ・ "DUAL OVERDRIVE" DUAL OVERDRIVE is a feature that combines two OVERDRIVE functions, allowing for more powerful light emission in a shorter time. ・ "HIDDEN STROBE" The bright lighting from OVERDRIVE may require measures against glare (such as the use of light shields or invisible light) for people near the lighting, but this feature eliminates that need. SVL has received the "inVISION TOP Innovation 2024" award for this technology. ・ Built-in Controller The lighting has a built-in controller, making it easy to use the above features simply by wiring the camera and lighting together.
Sleek design that fits in the frame! LED lighting for GF that can be easily installed with connectors.
The "FB600/FB1200" is a sleek-looking LED lighting for GF that offers tidy wiring and the option to choose the light color. It can be directly connected to an outlet, keeping the area around the outlet neat, and the LED body is available in two sizes: 1,028mm and 547mm. The power consumption for each is only 18W and 9W, respectively. We offer two light colors: neutral white (5000K) and daylight (6500K), allowing you to choose based on your work environment or purpose. 【Features】 ■ No adapter needed with AC100V power supply ■ Two installation patterns ■ Long size available ■ Two light colors *For more details, please refer to the PDF document or feel free to contact us.
