更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Oct 15, 2025～Nov 11, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
31～45 件を表示 ／ 全 1793 件
Ultra-thin ring light can be mounted on φ16 telecentric lens.
Ideal for φ16 telecentric lenses! Compact ring lighting optimized for φ16 telecentric lenses. Can be installed without worrying about space due to its slim design. Designed with an inner diameter of 16mm to fit the barrel diameter of φ16 telecentric lenses.
Low-angle ring lighting that gathers strong oblique light for close-range work.
Optimal for defect inspection and edge detection. The bullet-shaped LED element is mounted at a large tilt angle, gathering strong oblique light for close-range work with low-angle ring lighting. It can be used at close distances to the workpiece and is effective for three-dimensional recognition of edge chipping and unevenness. A diffusion ring can be easily screwed on to prevent reflections from glossy workpieces and elements.
Horizontal opposed ring lighting with cannonball-shaped LED elements mounted sideways.
Emphasizes unevenness with illumination from the horizontal direction. It can illuminate the workpiece from the side, making it effective for inspecting dents, engravings, and edges. A diffusion ring can be added later. It can also be used in combination with dome lighting.
Indirect lighting with LEDs mounted around the perimeter of a ring-shaped light guide plate.
Uniform illumination of glossy and uneven workpieces. The structure makes it difficult for LED elements to reflect on the workpiece, making it ideal for visual inspection of glossy workpieces like bottle openings. It is effective for uneven workpieces as well, as it provides uniform illumination with indirect light.
Slim, energy-saving, low-heat uniform surface lighting with a thickness of "minimum 6mm," allowing for space-saving installation.
By revising the structure of the light guide plate emission method, the height of the lighting has been reduced to 6mm or less (with the emission part at 5mm), making it even thinner than conventional products. It can be installed without worrying about the installation space of the device. The LEDs emit light from the surroundings, resulting in low power consumption. It can be used for a wide range of appearance inspections as backlight lighting. If the brightness of the IFLA series is insufficient, please consider the IHM series or IDHM series.
Thin surface light can be produced in multiples of 30mm.
High brightness and high uniformity thin surface-emitting backlight lighting suitable for a wide range of visual inspections. With chip LEDs arranged in high density, it offers higher brightness and uniformity than the IFL series. Available in various sizes, it can be produced in multiples of 30mm x 30mm. For large backlight lighting needs of 200mm x 200mm or larger, please consider the IFPA series.
Adoption of chip LEDs for transparent lighting achieves high output, lightweight, and low cost.
High-brightness transmission lighting evolved further from IHM. Chip-type transmission lighting achieves low cost, high output, and lightweight design. The product lineup includes 5 sizes of square-like shapes ranging from small to large, as well as 4 sizes of rectangular shapes, totaling 9 sizes.
Thin perforated surface lighting capable of imaging through reflection rather than transmission.
Adopting chip-type elements, achieving high output and lightweight design. By providing a φ40mm opening, imaging is possible through reflection rather than transmission. The product lineup includes three sizes of square approximate shapes, ranging from small to large. The emission colors available are white, red, and blue.
8mm thin and lightweight dome lighting, providing uniform illumination as there is no camera window.
Brighter and clearer A space-saving, lightweight, thin 8mm dome light without a camera window. It provides uniform illumination across the entire area. Compared to the conventional IFH series, it is about six times brighter, with improved uniformity and clarity. Even at close distances to the workpiece, imaging can be done without interference from troublesome reflections.
Reflective high uniformity and high brightness dome lighting
The NEO series has been brightened and is now newly available! By utilizing the hemispherical inner surface reflection, it emits uniform diffused light, reducing halation that easily occurs with direct light on uneven or glossy surfaces, allowing for shadow-free, uniform images. It is possible to capture curved or stepped workpieces as flat images. A large dome with a maximum diameter of 350mm is adopted, making it capable of accommodating larger workpieces that conventional small dome lighting could not handle. Compared to the previous NEO dome lighting, the blue light output has increased by about four times, while the white and red light outputs have increased by about two times, enabling faster inspections.
Combining red, blue, and green LEDs into a single lighting unit.
The blending of emission colors can be freely adjusted according to the inspection purpose. With a combination of three wavelengths—red, blue, and green—it provides full-color visible light illumination, covering a very wide wavelength range. Since each wavelength can be dimmed independently, subtle composite lighting colors are achievable.
Dome lighting that achieves strong illumination from all directions.
The inner surface of the bowl is equipped with LEDs, allowing for strong illumination from all angles. Additionally, by attaching a diffusion dome as an option, it is possible to achieve strong diffused light that minimizes reflections on spherical workpieces. There are also types that allow for multiple rows of LEDs to be divided into several circuits vertically, enabling independent dimming. We also accept requests for the integration of coaxial downlighting separately.
Dome lighting capable of irradiation from 16 directions, clearly capturing hard-to-detect scratches and dents with segmented illumination.
16-segment illumination with 4 directions and 4 levels Flexible illumination is possible with 16-segment illumination in 4 directions and 4 levels. Even difficult-to-detect scratches and dents can be captured clearly. No need to select lighting based on workpiece shape.
Uniform irradiation of spherical, uneven, and long workpieces; full-color version also released.
It is possible to inspect the workpiece in a tunnel style while covering it with lighting. It is universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Of course, combinations of dome, low angle, and coaxial can be used for various applications depending on the combination of wavelengths. It is ideal for sharp edges of elongated workpieces. By adopting power LEDs, sufficient light output can be obtained even with indirect lighting. The LED mounting part is designed as a heat sink, allowing for use even in constant light.
Cube dome lighting for conveyor picking provides uniform illumination even on uneven surfaces.
Uniform illumination for uneven and long workpieces. Inspection can be performed in a tunnel style while covering the workpiece with lighting. Universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Ideal for sharp edges of elongated workpieces. Sufficient light output is achieved even with indirect lighting. The LED mounting section is designed as a heat sink, allowing for use in constant light conditions.
