Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 825 items
Single-acting hydraulic cylinder RCS type 100 to 1000 kN
■□■Features■□■ ■10 to 100 TON ■Maximum operating pressure: 70 MPa ■Spring return type * The force indicated on the front is required to fully return the plunger. ■Capacity (KN): 100/200/293/435/888 ■Stroke (mm): 38/44/62/60/56 ■Pressure area (cm2): 14.4/28.6/41.8/62.1/126.9
Single-acting hydraulic cylinder RSM type 45 to 1500 KN
■□■Features■□■ ■4.5 to 150TON ■Maximum operating pressure: 70MPa ■Spring return type * The force shown on the front is required to fully return the plunger ■RSM-50N is equipped with a coupler (AR-630), while other cylinders are equipped with a high-flow coupler (CR-400) ■Capacity (KN): 45/100/200/293/435/718/888/1386 ■Stroke (mm): 5.5/10.3/10.8/12.7/15 ■Pressure area (cm2): 6.4/14.4/28.6/41.8/62.1/102.6/126.9/198.1
Ideal for research and development, repair, maintenance, and servicing tasks.
It features a user-friendly design based on ergonomics. The analog load gauge displays accurate loads. It employs a pump with an automatic switching function between high and low pressure discharge, allowing for fast low-pressure discharge during no-load conditions and fine feeding during pressurization. It is compact and easy to use, making it easy to install anywhere. By using ultra-high pressure hydraulic oil over 70MPa, it achieves high output in a small size. For more details, please download the catalog or contact us.
Comprehensive catalog of the compact, lightweight, simple, and practical "Mini Hand Press."
This is the comprehensive catalog for the 'Mecanix Mini Hand Press' by Shuboueki Co., Ltd. and Mechanics Co., Ltd., which is compact, lightweight, simple, has a large open height, and is very practical, making it extremely convenient to have one. The main applications include riveting, grommeting, bending and cutting, hole punching, stamping, and press-fitting operations (such as bearings and shafts). 【Featured Products】 ■ HPT-1E-L (Toggle Type) ■ HPT-1-L (Toggle Type) ■ HPR-1E-L (Rack Type) ■ HPR-1-L (Rack Type) ■ HPT-2E-L (Toggle Type) ■ HPT-3E-L (Toggle Type) The toggle type provides maximum thrust at the dead point (bottom dead center), while the rack type delivers uniform force throughout the entire stroke. *For more details, please contact us or refer to the catalog.
A precision pressure heating device that uses a heated platen driven by a servo motor actuator, suitable for applications such as thermal bonding and thermal transfer molding.
This is a precision pressure heating device that can be used for various applications, such as setting a sheet-like workpiece between upper and lower platens and pressing it against a heated platen using a servo motor-driven linear actuator to thermally bond the workpiece, or for heat transfer molding by sandwiching a plate-shaped mold together. We offer two types: a compact tabletop series (10-50 kN) and a high-capacity floor-mounted type (100-400 kN). ■ Energy Saving - Automation of temperature changes during mold changes - Energy savings through rapid heating ■ CIM Compatibility - Communication with external computers or sequencers via RS485 - Remote control and monitoring capabilities ■ Comprehensive Protection Circuit and Abnormal Detection Functions - Heater and sensor disconnection detection, overcurrent cutoff - Equipped with SSR failure detection functions
The new vacuum roll press from Shinto passes the workpiece through a high-precision roll press under a vacuum atmosphere, applying heat and pressure. Continuous processing is possible, which improves productivity.
◆Vacuum Press Method → By using Shin-Toh's unique vacuum jigs, high-quality processing is possible with low power consumption. ◆Single Piece Flow Method → Each piece is carefully processed one by one, ensuring no variation in quality. Traceability management is also possible. ◆Roll Gap Control → Maintains a uniform gap, making it ideal for the thickness adjustment process of the workpiece. ◆Reduction of Processing Time → By dividing the process and adopting the single piece flow method, the time for decompression, heating & pressurization, and cooling is shortened, improving productivity. ◆Cost Reduction & Energy Saving → No repeated heating and cooling, resulting in low power consumption. Since only one workpiece (in a narrow space) requires decompression, it can be produced with a small vacuum pump. ◆Rich System Configuration → We offer proposals tailored to your system and work from a wide range of options.
Equipped with multi-axis control functionality! High-precision wide-range servo press.
The "DSP3000 Series" is a high-precision wide-range servo press equipped with multi-axis control functions. It can save press operation results and waveform data settings to a CF card. High-speed data communication is also possible via Ethernet. It features a variety of pressing methods to accommodate diverse applications. 【Features】 ■ Flexibility: Maximum of 128 parameters and 64 sequences ■ Manageability ■ Precision: Distance displayed to the 1/1000th digit, ultra-low-speed pressurization control at 0.01mm/s For more details, please refer to the catalog or feel free to contact us.
A portable type designed for robot installation! Contributing to the "fully automated movement" that approaches rather than sets up the work.
The first Dentsu servo press, the "C Press Portable Type," is a product developed with the premise of being mounted on "robots," which are essential in today's production environments where automation and unmanned operations are being called for. It features a lightweight and compact design anticipating robot mounting, with a maximum load type of 10kN weighing less than 20kg, including the frame. It can also be mounted on smaller robots with lower carrying weights. By being mounted on a robot, it can directly approach the workpiece, making it suitable for applying pressure to large or heavy workpieces. Additionally, it can accommodate various shapes, allowing it to be used as a "general-purpose servo press." For those in the automotive and semiconductor industries considering various automation options for servo presses, please feel free to reach out if you are interested. **Features** - Capable of being mounted on robots - Approximately 30% smaller than conventional models - Minimum weight of less than 20kg - Contributes to the complete automation of servo presses *For more details, please download the materials or contact us via our website.*
Reduce production loss by shortening mold exchange time! A die set that allows anyone to easily exchange molds with just one touch.
Are you struggling with the time it takes to change press molds due to deterioration? QDC stands for Quick Die Change, which is a die set designed for quick mold replacement. It is recommended to be used while attached to the press machine, so the mold sizes need to be somewhat standardized. If you are performing continuous pressing with multiple processes on the same press machine, we also offer the multi-process QDC model = Q-ACE. 【A must-see for those with these concerns!】 ● It takes too long to change setups. ● You need time for trial runs to carefully align the core. ● If the die set is heavy, operating the equipment can be difficult. For more details, please refer to the PDF document or feel free to contact us.
From simple manual presses to fully automatic program-controlled types, we have a lineup!
The "NT Heater Press" is a press machine that achieves a parallelism of 20μm between the upper and lower heating plates (when the heating plate is 100mm square). We offer three types tailored to different applications: wave type, electric type, and handy type. By adopting a vacuum frame, it enables heating and gas replacement heating under vacuum conditions. Furthermore, the use of an ultra-high-pressure hydraulic system has realized low noise, lightweight, and compact design. 【Features】 ■ Precision grinding processing and a four-column frame are employed ■ A vacuum frame is attached to the heating plate ■ Heating and gas replacement heating under vacuum conditions are possible ■ Ultra-high-pressure hydraulic system adopted ■ Achieves low noise, lightweight, and compact design *For more details, please refer to the PDF materials or feel free to contact us.
Support for direct shipping from Taiwan to your overseas factory.
With over 35 years of history and the number one shipping record in Taiwan's high-speed press manufacturing, we are a specialized manufacturer active not only in Taiwan but also in press processing sites across Asia, Europe, North America, and Japan.
Maximum thrust at the stroke end!
High-precision, long-life air press from Schmitt with a twist prevention feature for the ram.
Realize visualization and storage tasks by combining features such as built-in measurement functions!
The "SCHMIDT(R) ServoPress" is a servo press that combines a drive unit, process management system, and controller. It features built-in measurement functions with no stroke measurement play and no lateral pressure in force measurement (scanning speed of 2000Hz). This product is equipped with a real force controller and has unique characteristics. 【Features】 ■ Quickly reaches reference values ■ Does not exceed target values ■ Positioning accuracy remains at 1/100mm even with large changes in force ■ High-precision force control ■ Adjustable parameters *For more details, please download the PDF or feel free to contact us.
Maximum stroke of 70mm! A compactly designed hand press that takes up little space.
The "HZP-6" is a rack and pinion type hand press that accommodates a wide range of applications with powerful pushing, deep reach, and long stroke. The maximum thrust stroke is 70mm, and the maximum thrust is 2.4kN. With excellent operability that enhances work efficiency and productivity, it supports a wide variety of tasks and features a compact design that takes up little space. 【Features】 ■ Maximum thrust: 2.4kN ■ Maximum thrust stroke: 70mm ■ Easy stroke adjustment and tool exchange ■ User-friendly with excellent operability ■ Compact design that takes up little space *For more details, please refer to the PDF materials or feel free to contact us.
Easy to handle and excellent operability rack and pinion type hand press.
The "NH202" is a rack and pinion type hand press that allows for easy stroke adjustment and tool exchange. The maximum thrust stroke is 60mm, and the maximum thrust is 2.0kN. It is easy to handle and offers excellent operability, providing powerful pressing, deep reach, and long strokes to accommodate a wide range of applications. 【Features】 ■ Maximum thrust: 2.0kN ■ Maximum thrust stroke: 60mm ■ Easy stroke adjustment and tool exchange ■ Compact design that saves space ■ Excellent operability for a wide variety of tasks *For more details, please refer to the PDF document or feel free to contact us.
Easily and quickly integrated into the production line! Compact design electric press.
The "SCHMIDT Electric Press" features a compact design that is convenient for integration into assembly equipment. It requires neither air nor hydraulic power, allowing for easy and quick integration into production lines. Using the "SCHMIDT EP Assistant" software, a single stroke can be divided into a maximum of 14 drive points. It is possible to parameterize and input position, speed, and acceleration/deceleration slopes for each segment, enabling precise control. 【Features】 ■ Compact design ■ No air or hydraulic power required ■ Easy and quick integration into production lines ■ Parameterized segment information is recorded internally in the motor ■ Capable of processing a variety of workpieces *For more details, please refer to the external link page or feel free to contact us.
Servo press combining drive unit, process management system, and controller.
We handle the "SCHMIDT Servo Press" equipped with a Real Force Controller. Visualization and data storage tasks are achieved by combining features such as built-in measurement functions (scanning speed of 2000Hz) and process signal amplification. We offer a wide range of models, including "Press Type 405" and "Press Type 415/416." 【Features】 ■ Built-in measurement functions (scanning speed of 2000Hz) ■ Process signal amplification ■ Requires SCHMIDT Process Controller 600 or 5000 (PC system) ■ Quick processing with built-in software PLC for CNC ■ CNC with an external command set specialized for force adjustment positioning *For more details, please refer to the external link page or feel free to contact us.
Adjust the work height accurately in a short time! Constant thrust can be obtained throughout the entire stroke.
The "SCHMIDT Direct Acting Air Press with Press Control 600" provides a constant thrust throughout the entire stroke range. The ram is equipped with a twist prevention mechanism and features a ground finish on its surface. It employs high-precision slide guides, allowing for high precision and long service life. We offer a rich lineup of 8 models with thrusts ranging from 1.6 to 43.0 kN and strokes from 50 mm to a maximum of 150 mm. 【Features】 ■ Constant thrust is achieved throughout the entire stroke range ■ High-precision slide guides are used ■ The press table also has a ground finish ■ Allows for quick and accurate adjustment of work height ■ Capable of one-shot operation and continuous automatic operation *For more details, please refer to the external link page or feel free to contact us.
We have a wide range of standard model direct-acting air presses available.
We offer the standard model "Direct Acting Air Press." Our lineup includes various air presses, starting with the "PP20," which has a maximum thrust of 1.6 kN, and the "PP23," with a maximum stroke of 50 to 300 mm. Please choose controllers and auxiliary devices according to your application. 【Features】 ■ Direct acting air press (standard model) ■ Select controllers and auxiliary devices according to your application ■ A wide range of products available *For more details, please refer to the external link page or feel free to contact us.
Power-up model with reinforced internal springs! Spring-type impact press.
We handle the impact press 'SP200' that utilizes impact force from springs. The 'SP200' is a power-up model of a spring-type impact press with reinforced built-in springs. The maximum impact force is 10kN, and the maximum holding force is 0.8kN. 【Features】 ■ Maximum impact force: 10kN ■ Maximum holding force: 0.8kN ■ Spring-type impact press ■ Power-up model with reinforced built-in springs ■ Utilizes impact force from springs *For more details, please refer to the external link page or feel free to contact us.
An impact press that demonstrates great power in short processing strokes.
The "Dynamark DMSJ-03C" is an impact press that demonstrates great power for tasks with short processing strokes, such as driving rivets. When using this product for marking at an air pressure of 0.5MPa, its power is equivalent to approximately 7 tons of a hydraulic press, with an air consumption of only 0.65Nℓ/st. Additionally, since the workpiece is held down before striking, it allows for safe operation despite its high output, and alignment and adjustments are also easy. 【Features】 ■ Capable of precise and clean finishes ■ Safe despite high output ■ Easy alignment and adjustments ■ Operable by simply connecting an air source and lightly pressing a lever ■ Demonstrates great power for tasks with short processing strokes *For more details, please refer to the external link page or feel free to contact us.
Quick and precise adjustment of work height is possible! A wide range of options is available.
The "SCHMIDT High-Performance Direct Acting Air Press with Press Control 600" provides a constant thrust throughout the entire stroke range. The ram is equipped with a twist prevention mechanism and has a ground finish on its surface. Additionally, it employs high-precision slide guides, allowing for high accuracy and long service life. We offer a wide range of 8 models with thrusts from 1.6 to 43.0 kN and strokes from 50 mm to a maximum of 150 mm. 【Features】 ■ Constant thrust is achieved throughout the entire stroke range ■ The press table also has a ground finish and features mounting holes with bore diameter accuracy of H7 ■ There are T-slots on the side, allowing for easy tool fixation with fixed bolts ■ Quick and precise adjustment of work height is possible ■ One-shot operation and continuous automatic operation are available *For more details, please refer to the PDF document or feel free to contact us.
Four models with a maximum thrust of 15 to 60 kN, compact yet high thrust!
The "toggle-type air press" achieves maximum thrust at the stroke end. By adjusting the guide liner, you can eliminate play and looseness. We also offer a square ram type that does not experience twisting even at a thrust of 28.0 kN. The surface of the guide liner for the square ram is treated with Teflon. 【Features】 ■ Four models available with maximum thrusts ranging from 15 to 60 kN ■ High thrust in a compact design ■ Maximum thrust achieved at the stroke end ■ Square ram type available that does not experience twisting even at a thrust of 28.0 kN ■ Teflon treatment on the surface of the guide liner for the square ram *For more details, please refer to the PDF document or feel free to contact us.
Introduction of a punching press utilizing impact force from a spring.
The "Spring-Type Impact Press" is a punching press that utilizes impact force generated by springs. We offer a power-up model with reinforced internal springs, the "SP200," among others. 【Features】 ■ Spring-type ■ Utilizes impact force from springs ■ Power-up model with reinforced internal springs (SP200) *For more details, please refer to the PDF document or feel free to contact us.
Starting with the DMSJ-03C, we have a lineup of the DMMC series!
The "Dynamark" is an impact press that demonstrates great power for short stroke processing tasks. Since it applies impact after holding the workpiece in place, it allows for accurate and clean finishes. When using the "DMSJ-03C" for marking at an air pressure of 0.5MPa, its power is equivalent to about 7 tons of a hydraulic press. Moreover, the air consumption is only 0.65Nl/st. It achieves low cost, space-saving, and energy efficiency. 【Features】 ■ Safe despite high output due to impact applied after holding the workpiece ■ Easy alignment and adjustment ■ Operates simply by connecting an air source and lightly pressing a lever ■ Can be easily automated when integrated into a production line (DMMC series) *For more details, please refer to the PDF document or feel free to contact us.
A comprehensive lineup boasting high precision is capable of handling high functionality and a wide range of tasks!
Our "Hand Press" features excellent operability and a compact structure that enhances safety and production efficiency, enabling reliable pressing operations. It is made from a highly rigid material that has undergone precision machining, ensuring outstanding durability and maintenance-free operation. We offer two types: one manufactured by Schmidt in Germany and our original Nakaseiki model, each with variations in rack and pinion and toggle types. We also provide a wide range of options, including a return lock mechanism and load management devices. 【Features】 - Compact design that is small and lightweight, taking up minimal space - A rich lineup and a variety of optional products - The height of the head can be freely adjusted, and stroke adjustment, as well as tool and jig replacement, are easy, providing excellent workability - Made from materials with precision machining, offering superior rigidity and durability - Simple structure that requires no maintenance *For more details, please refer to the PDF document or feel free to contact us.
Easy to handle, excellent operability! A hand press with easy stroke adjustment and tool replacement.
The "Rack Pinion Type NH/HZP" is a hand press that enhances work efficiency and productivity with excellent operability, suitable for a wide range of tasks. It features a compact design that takes up little space. With powerful pressing, a deep throat, and a long stroke, it accommodates a wide variety of applications. We offer a rich lineup, starting with the "NH100." 【Features】 ■ Easy stroke adjustment and tool exchange ■ User-friendly with excellent operability ■ Compact design that takes up little space ■ Accommodates a wide range of applications with powerful pressing, a deep throat, and a long stroke ■ Extensive lineup *For more details, please refer to the PDF materials or feel free to contact us.
Reliable and robust structure with powerful performance that requires no maintenance!
The "Toggle Type RT/HZP" is a hand press suitable for tasks such as powerful pressing, strong bending, and thin sheet punching. It features a compact design that takes up little space. It has durability thanks to its rigid structure. We offer a wide range of models, starting with the "RT501." 【Features】 ■ Powerful operation with no maintenance required ■ Durability unique to its rigid structure ■ Suitable for tasks such as powerful pressing, strong bending, and thin sheet punching ■ Compact design that takes up little space ■ A rich lineup of models *For more details, please refer to the PDF document or feel free to contact us.
A hand press that combines the advantages of a rack and pinion press. With a maximum thrust of 20.0 kN, it allows anyone to perform reliable pressing work with confidence.
The "HZP-11N (Cam Type)" is a product that combines the advantages of toggle presses and rack & pinion presses. Its excellent operability and simple, compact structure enhance safety and production efficiency, allowing anyone to perform reliable press work with confidence. Using high-rigidity materials and precision machining, it boasts exceptional durability, with no degradation over long-term use and maintenance-free operation, eliminating the hassle of upkeep. 【Features】 - Compact design that is small and lightweight, taking up minimal space - Height of the head can be freely adjusted - Easy tool and jig replacement, offering excellent workability - Precision machining with materials that excel in rigidity and durability - Simple structure requires no maintenance *For more details, please refer to the PDF document or feel free to contact us (https://www.nakaseiki.co.jp/contact/).
Jigs (fixtures) and presses
We design and manufacture various function test jigs, in-circuit test jigs, inline type press units, etc., tailored to the shape and size of the target inspection substrate. While we have standard products available, we also accept the development and production of custom items that flexibly respond to customer requests.
