We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

resin(100) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

resin Product List

151～165 item / All 281 items

Displayed results
Low-pressure sealing thermosetting dry molding material Bioglass [Developed product]

Low-pressure sealing thermosetting dry molding material Bioglass [Developed product]

Contributes to the miniaturization of automotive components and the reduction of processes.

Mitsubishi Gas Chemical Next (formerly Nippon Yuka) has developed a low-pressure thermosetting dry molding material called "Bioglass" that enables insert molding, achieving both reduced production time and low-pressure molding for the encapsulation of miniaturized electronic materials. Compared to conventional materials, it allows for significant productivity improvements through rapid curing and post-curing elimination. It contributes to the "miniaturization" and "reduction of processes" in automotive components. 【Exhibition Information】 ■Exhibition Name: CEATEC2025 ■Dates: October 14 (Tuesday) to October 17 (Friday), 10:00 AM to 5:00 PM ■Venue: Makuhari Messe ■Hall Number: 3 3H008 ■Admission Fee: Free (Pre-registration required) ■Exhibition URL: https://www.ceatec.com/ja/ *For more details, please refer to the PDF document or feel free to contact us.

  • バイロ.png
  • Composite Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High transparency rubber-modified epoxy resin

High transparency rubber-modified epoxy resin

This is an intermediate product that can impart crack resistance to cycloaliphatic epoxy resin.

The high transparency rubber-modified epoxy resin "Reginas Bond RKB-5810" has the following features: [Features] ■ It can impart crack resistance to alicyclic epoxy resin formulations. ■ It does not hinder the transparency and heat resistance of alicyclic epoxy resin formulations. ■ It alleviates the stress generated during heat cycle testing. ■ It allows for thixotropic properties without compromising the curing ability of UV-curable resins. *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface transfer photopolymer resin "Technovit 2200 Series"

Surface transfer photopolymer resin "Technovit 2200 Series"

Curing is completed in about 20 to 60 seconds! After curing, it has excellent hardness, allowing for processing such as polishing and cutting!

The "Technovit 2200 Series" is a light-curing resin for surface transfer from Kulzer. When direct observation of the surface is not possible, transfer becomes one method to observe the surface condition. Kulzer's resin accurately transfers the surface of the sample, enabling high-precision observation. 【Features of the Technovit 2200 Series】 ■ Curing is completed in approximately 20 to 60 seconds ■ Almost no influence from temperature ■ Available in three types: 2200, 2210, and 2220, tailored for detailed applications ■ Can be cured with the dedicated lights Pekalux POWER LED and Technovit Blue LED ■ Excellent hardness after curing ■ Superior for processing such as polishing and grinding *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soft fluoropolymer resin SF (THV) tube '026-T series'

Soft fluoropolymer resin SF (THV) tube '026-T series'

Recommended for use at a destruction pressure of X1/3 to 1/5 (considering safety factors)! Introducing a highly transparent tube.

The "026-T Series" is a soft fluoropolymer SF (THV) tube that is resistant to acids and alkalis. It is soft, flexible, and has a maximum operating temperature of 50°C. It has high transparency and excellent bending fatigue resistance. Additionally, it complies with RoHS2 standards. For information regarding chemical resistance, please contact us. 【Features】 ■ Resistant to acids and alkalis ■ Soft and flexible ■ Excellent bending fatigue resistance ■ High transparency ■ Maximum operating temperature (reference): 50°C *For more details, please refer to the related links or feel free to contact us.

  • tube

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Embedding resin for inspection 'Technovit 9100'

Embedding resin for inspection 'Technovit 9100'

Ideal for immunohistochemical studies including in-situ hybridization!

"Technovit 9100" is a plastic embedding system based on MMA (methyl methacrylate). It has been specifically developed for the embedding of calcified tissues and soft tissues using an extended research spectrum under an optical microscope. It is suitable for immunohistochemical studies, including histological overview staining, enzymatic chemistry, and in-situ hybridization. 【Features】 ■ Plastic embedding system based on MMA (methyl methacrylate) ■ Developed for the embedding of calcified tissues and soft tissues ■ Suitable for immunohistochemical studies, including in-situ hybridization ■ Polymerization occurs by eliminating oxygen using a catalyst system consisting of peroxides and amines ■ Additional components such as PMMA powder and modifiers enable controlled polymerization at low temperatures (ranging from -2 to -20°C depending on volume) to ensure complete dissipation of polymerization heat *For more details, please refer to the PDF document or feel free to contact us.

  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NK Optimizer (Light-curing resin for nanoimprint)

NK Optimizer (Light-curing resin for nanoimprint)

Light-curing resin for nanoimprinting

NK Optimizer Series This is a photo-curable resin for nanoimprinting that applies the technology cultivated in the development and design of resist materials and optical materials. It is a photo-curable resin for nanoimprinting that can be used in sensing devices such as micro-lens arrays (MLA), diffractive optical elements (DOE), facial recognition devices, and mechless LiDAR, as well as AR/VR glasses. The "NL-S Series" offers high heat resistance and solder reflow grade. It provides materials that can be imprinted with a refractive index ranging from low (nD1.35) to high (nD1.93). The "NL-N Series" is a refractive index adjustment material for optical components. The "NL-R1020" is a dry etching resistant grade essential for fine processing, with a selectivity of 1.0 (Al2O3) and 0.6 (TiO2) demonstrated. Various customizations are available to meet customer requirements. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MC901　MC900NC

MC901　MC900NC

Basic grade of MC nylon polymerized and molded from the main raw material nylon monomer under atmospheric pressure.

Features 1. Mechanical Strength Compared to general nylon 6 (in injection molding and extrusion), it has superior mechanical strength and durability. 2. Wear Resistance It is a self-lubricating material with excellent sliding performance, demonstrating outstanding wear resistance, especially under high loads. 3. Heat Resistance It exhibits heat resistance up to 120°C (continuous use temperature). 4. Chemical Resistance It has chemical resistance that makes it less susceptible to organic solvents, oils, and alkaline chemicals.

  • gear
  • shaft
  • Plastic bearings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PES Natural

PES Natural

Excellent heat resistance, impact resistance, and hot water properties, with a translucent amber color that allows for internal visualization.

"PES Natural" has a heat resistance with a load deflection temperature of 203°C and excellent flame retardancy (V-0). It is particularly outstanding in heat and water resistance, showing no hydrolysis even under high-temperature steam at 160°C. Additionally, it is resistant to oils and fats such as gasoline and engine oil, as well as detergent components. 【Features】 ■ Polyether sulfone resin ■ Excellent heat resistance, impact resistance, and hot water properties ■ Translucent amber color allows for internal visualization *Please feel free to contact us for more details about the material.

  • others
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Thin fluoropolymer (PTFE) adhesive tape "No.903UT"

Contributing to CO2 reduction with a thin and lightweight design! Achieving approximately 23% weight reduction compared to conventional products.

"No.903UT" is a thin type adhesive tape with a total thickness of 0.06mm, featuring excellent properties such as heat resistance, slip resistance, and water repellency. It has obtained Flame Retardant certification against UL510 flammability standards (Registration Number E34833). It can be continuously used in a wide temperature range of -60℃ to 200℃ (recommended value). Additionally, it can be used at even higher temperatures for short periods. 【Features】 ■ Thin type with a total thickness of 0.06mm ■ Approximately 23% lighter compared to conventional products ■ Excellent heat resistance, slip resistance, and water repellency ■ Continuous use possible in a wide temperature range of -60℃ to 200℃ *For more details, please refer to the PDF document or feel free to contact us.

  • 903UTサブ1.PNG
  • 903UTサブ2.PNG
  • Composite Materials
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Recycled Resin" <Contributing to the achievement of SDGs by reusing waste plastic>

"Recycled Resin" <Contributing to the achievement of SDGs by reusing waste plastic>

What is the difference between virgin resin and recycled resin? We will resolve that question. Basic knowledge materials will be provided.

Our company is engaged in the production of "recycled resin." We collect waste materials and defective products of super engineering plastics such as "PPS" and "polycarbonate" generated in factories, and carry out recycling under thorough quality control. We have established a system that can stably supply high-quality recycled resin that can be reused as materials for products. Furthermore, through the recycling of resins, our company is actively working towards achieving the SDGs. We are currently offering materials related to our recycled resin. [Contents of the materials] ■ About recycled polycarbonate ■ About virgin polycarbonate ■ About recycled PPS ■ About virgin PPS ■ About our initiatives towards the SDGs *For more details, please refer to the materials. Feel free to contact us with any inquiries. ★ We also plan to exhibit at trade shows. For more information, please see the basic information below.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Production Example] Nano-phase Structure Tough Resin

[Production Example] Nano-phase Structure Tough Resin

Introducing examples of the production of robust 3D printed resins with controlled nanostructures, compatible with 355nm large-scale SLA 3D printers!

We would like to introduce examples of the production of "Nano-phase structured tough resins." The "CHL series" features high hardness (Shore D79) and high elongation (37%), compatible with 355nm large SLA 3D printers. The "RHL-E series" is a resin suitable for hinge applications in 3D printing, with medium hardness (Shore D70) and ultra elongation (101%). Additionally, we also have production examples of the "JAG series," which possesses high rebound elasticity. 【Features of Nano-phase structured tough resins】 ■ CHL Series - Compatible with 355nm large SLA 3D printers - High hardness (Shore D79), high elongation (37%) ■ RHL-E Series - Resin suitable for hinge applications in 3D printing - Medium hardness (Shore D70), ultra elongation (101%) *For more details, please refer to the PDF document or feel free to contact us.

  • 3D Printer
  • Resin processing machine
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PEEK Natural

PEEK Natural

Super engineering plastics with excellent flame retardancy, heat resistance, chemical resistance, and high strength.

"PEEK Natural" has a high heat resistance with a continuous use temperature of 260°C, and its heat water resistance is at the highest level for resins, allowing for continuous use even under high-temperature steam. It possesses excellent chemical resistance, withstanding most acids and alkalis even at high temperatures. It is suitable for semiconductor components, metal substitute parts, and sliding parts. 【Features】 ■ Polyether ether ketone resin ■ Excellent flame retardancy, heat resistance, and chemical resistance ■ High mechanical strength ■ Minimal smoke and toxic gas generation during combustion *Please feel free to contact us for more details about the material.

  • others
  • Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Massivit 5000 uses impact-resistant and heat-resistant resin DIM 400.

Massivit 5000 uses impact-resistant and heat-resistant resin DIM 400.

3D Printer Impact-Resistant and Heat-Resistant Resin - High-Speed Integrated Molding for Large Prototypes, Actual Products, and Master Molds

■ Main Features Dimengel 400 is a 3D printing material with excellent impact resistance and heat resistance, designed for industrial applications. It enables ultra-large and high-speed modeling with the Massivit 5000 and Massivit 10000-G 3D printers. * For a lineup of other resin materials that can be used with Massivit 3D printers (such as high precision, flame retardant, transparent, etc.), please refer to the related links.

  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low melting point thermoplastic polyurethane resin "Jiyu Henkei Hapura Furi-re"

Low melting point thermoplastic polyurethane resin "Jiyu Henkei Hapura Furi-re"

[Sample Gift] A plastic that turns into clay in response to heat above 60°C! It is effective as a production tool for scratch prevention and other measures. Can be used repeatedly!

"Haplafreele" is the optimal plastic for tools in manufacturing environments. Compared to general thermoplastic resins, it becomes malleable at a low temperature of 60°C and remains in a workable state for a longer time, making it easier to handle. It can easily be turned into a malleable form using an industrial dryer, oven, or hot water, allowing anyone to use it easily. 【Features】 ◆ Unbreakable Mechanical strength is more than three times that of rubber. ◆ Scratch-resistant Softer than plastics like PP, it does not scratch. ◆ Non-sticky Even when it becomes malleable, it can be peeled off without dirtying the other side. ◆ Long malleable time It remains malleable for a long time, making it easy to work with. *For more details, please request a catalog or view the PDF data available for download. ◎ Right now, we are offering free samples! If you would like a sample, please feel free to apply through the [Contact Us] section.

  • plastic
  • Other polymer materials
  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin, plastic materials long-term durability test (creep test)

Resin, plastic materials long-term durability test (creep test)

Change the load stress (weight) and measure the time until failure for each!

The "Long-term Durability Test (Creep Test)" is an evaluation of the long-term durability of resin materials, assessing creep characteristics under tensile, bending, and compression modes. By varying the load stress (weight) and measuring the time until failure for each, it is also possible to predict the lifespan of the resin material by plotting these results. Creep failure refers to the phenomenon where a resin material experiences failure below its breaking strength when subjected to a load for an extended period. [Test Conditions] ■ Test Temperature: 23℃ to 200℃ ■ Test Load: 1 to 500 kg ■ Test Modes: Tensile, Bending, Compression ■ Number of Tests Possible: Up to n = 6 *For more details, please refer to the related links or feel free to contact us.

  • Contract measurement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to resin

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.