Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
61～75 item / All 188 items
Demonstrating cost performance over technological advancement.
While hydrogen batteries, which can be used more safely than lithium-ion batteries, are gaining attention, they are still not widely adopted due to cost issues. Therefore, what our company has focused on is MEA. By simply switching the materials of existing products to graphene products, we can achieve a 50% cost reduction.
Resin for replica molds that do not require release agent treatment
PARQIT is a true light-curing resin that starts curing solely with light and fully cures only with light. Among them, it is a resin suitable for the production of fine structures. It is widely used as a replica mold for imprinting, and once produced as a replica mold, it can be repeatedly transferred without the need for release agent treatment. *The number of transfers may vary depending on the structure of the transfer object, the properties of the transfer material, and other conditions. *For more details, please download the catalog or contact us.
A special grade of ALTESTER suitable for applications requiring heat resistance and impact resistance! Amorphous and highly transparent!
The "ALTESTER SH Grade" is a special grade that has heat resistance and improved impact resistance. The impact resistance is higher compared to existing grades, on par with PET, and it has good chemical resistance as an amorphous polyester. Additionally, it has a Tg of 135°C and a total light transmittance of over 91%. It is a transparent material that demonstrates high heat resistance. 【Features】 ■ Glass transition temperature is 135°C, no deformation in boiling test ■ Amorphous with high transparency ■ Impact resistance is higher compared to existing grades, on par with PET ■ Good chemical resistance as an amorphous polyester ■ Listed in the Ministry of Health, Labour and Welfare positive list *For more details, please refer to the PDF document or feel free to contact us.
High hardness, stain resistance, water-repellent and oil-repellent resin.
PARQIT is a true light-curing resin that starts curing solely with light and fully cures only with light. Among its features, it has a very high hardness and possesses dirt resistance, water repellency, and oil repellency. It is used for hard coatings, anti-fouling coatings, and water/oil repellent coatings, and it also enables the hardening of fine structures transferred using the imprint method. *This resin is a joint development product with Tokyo University of Science.* *For more details, please download the catalog or contact us.*
Fluororesin porous tube with high water repellency and air permeability.
This is a product made by porousizing PTFE. It has high water repellency and air permeability, and the air permeability can be adjusted by changing the porosity. It excels in dimensional stability and flexibility, making it difficult for dimensional changes to occur even when constructed into complex shapes in high-temperature environments. Additionally, as it is made of pure PTFE, it does not deteriorate due to various chemical solutions. It is also possible to manufacture rod-shaped or multi-lumen types.
The total light transmittance is 89%! It has high elasticity and is particularly excellent in recovery from spring compression, made of thermoplastic resin.
"PAR-Polyarylate" is a synthetic resin that belongs to the category of amorphous thermoplastic resins, characterized by the polycondensation of divalent phenols and dibasic acids such as phthalic acid and carboxylic acids. It is transparent, with a total light transmittance of 89%, comparable to polycarbonate. Ultraviolet rays cause molecular free transition on the resin surface. Additionally, it has excellent weather resistance and UV shielding properties, high yield elongation, and outstanding impact resistance, creep resistance, and wear resistance. 【Features】 ■ Total light transmittance is 89% ■ Excellent weather resistance and UV shielding properties ■ High yield elongation, outstanding impact resistance, creep resistance, and wear resistance ■ High elasticity, particularly excellent recovery from spring compression ■ High heat resistance with a load deflection temperature of 175°C and a glass transition temperature of 193°C in an unreinforced state ■ Flame retardant UL94V-0 in an unmodified state *For more details, please refer to the PDF document or feel free to contact us.
For light diffusion, anti-blocking, etc.! - High hardness, high refractive index spherical resin microparticles.
We would like to introduce our melamine resin microparticles, "Hard Beads." The grades available are M1 (average particle diameter 1μm), M5 (average particle diameter 5μm), and M10 (average particle diameter 10μm). Additionally, the refractive index is 1.68, and the particle hardness is 76 MPa. 【Features】 ■ High hardness ■ High refractive index ■ Refractive index: 1.68 ■ Particle hardness (MPa): 76 *For more details, please download the PDF or feel free to contact us.
A product that suppresses the generation of static electricity due to wear while maintaining its basic physical properties!
"NL-AS(B)/NL-AS(P)" is a conductive and static-dissipative grade that can be used for base cassettes in clean rooms, star foil for food and beverages, and guide rails. In the semiconductor field, the conductive grade "NL-AS(B)" is used, while in the food sector, the static-dissipative grade "NL-AS(P)" is adopted. Please feel free to contact us if you have any inquiries. 【Specifications of NL-AS(B) (Excerpt)】 ■ Tensile Strength: 35MPa ■ Elongation at Break: 300% ■ Elastic Modulus: 830MPa ■ Wear Mass: 15mg ■ Melting Point: 135℃ *For more details, please refer to the PDF document or feel free to contact us.
A product that improves rigidity and wear resistance by adding filler-type additives!
"NL-RB3/NL-RB6" is a high rigidity and wear-resistant grade that can be used for thrust bearings and suction boxes for paper manufacturing. It can be considered even under severe conditions such as high loads, where "NL-W" is difficult to use. When used as a processing material, there is a tendency for tool wear to occur more quickly compared to other grades due to the influence of filler-type additives. 【Specifications of NL-RB3 (excerpt)】 ■ Tensile strength: 40 MPa ■ Elongation at break: 300% ■ Elastic modulus: 900 MPa ■ Wear mass: 14 mg ■ Melting point: 136°C *For more details, please refer to the PDF document or feel free to contact us.
It has low wear resistance comparable to polytetrafluoroethylene (PTFE) and approximately 12 times the wear resistance!
"NL-Super Mew VD/VD(SBL)" is a low-friction grade that can be used for food and beverage guide rails in general, as well as for other applications requiring long-term durability. Compared to general low-wear grades, durability (sustained low wear characteristics) has been significantly improved. There may be color variations on the molded surface, but there are no quality issues. 【Specifications of NL-Super Mew VD (excerpt)】 ■ Tensile strength: 40 MPa ■ Elongation at break: 270% ■ Elastic modulus: 650 MPa ■ Wear mass: 11 mg ■ Melting point: 135℃ *For more details, please refer to the PDF document or feel free to contact us.
![Precision machining of polyimide resin (PI resin) [DuPont SP-1]](https://image.mono.ipros.com/public/product/image/2be/2001475622/IPROS14769719414578822486.png?w=280&h=280)
We offer precision machining of DuPont's Vespel Series SP-1 polyimide resin. We have a large inventory available. From small lots of 1 piece to mass production!
The DuPont Bespoke Series SP-1 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the properties of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 86.2 MPa Tensile elongation at break: 7.5% Flexural strength: 110.3 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.
![Precision machining of polyimide resin (PI resin) [DuPont SP-21]](https://image.mono.ipros.com/public/product/image/187/2001484010/IPROS13497844223647207240.png?w=280&h=280)
We offer precision machining of DuPont's Vespel Series SP-21 polyimide resin. We have a large inventory available. From small lots of one piece to mass production!
The DuPont Bespoke Series SP-21 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the characteristics of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 65.5 MPa Tensile elongation at break: 4.5% Flexural strength: 110.3 MPa *You can view our available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.
![Precision machining of polyimide resin (PI resin) [DuPont SP-22]](https://image.mono.ipros.com/public/product/image/7f4/2001484012/IPROS84773476520407745342.png?w=280&h=280)
We offer precision machining of DuPont's Bespoke Series SP-22 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!
The DuPont Bespel Series SP-22 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. Advanced processing technology tailored to the characteristics of polyimide resin allows us to meet all of our customers' needs. [Key physical properties at 296K] Tensile strength: 51.7 MPa Tensile elongation at break: 3.0% Bending strength: 89.6 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.
![Precision machining of polyimide resin (PI resin) [DuPont SP-211]](https://image.mono.ipros.com/public/product/image/375/2001484013/IPROS23514558687750819350.png?w=280&h=280)
We offer precision machining of DuPont's Bespel Series SP-211 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!
The DuPont Bespel Series SP-211 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the characteristics of polyimide resin, we meet all of our customers' needs. 【Key physical properties at 296K】 Tensile strength: 44.8 MPa Tensile elongation at break: 3.5% Flexural strength: 68.9 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.
![Precision machining of polyimide resin (PI resin) [DuPont SP-3]](https://image.mono.ipros.com/public/product/image/a81/2001484015/IPROS85592097922564027197.png?w=280&h=280)
We offer precision machining of DuPont's Bespoke Series SP-3 polyimide resin. We have a large inventory. From small lots of 1 piece to mass production!
The DuPont Bespel Series SP-3 is a polyimide resin characterized by heat resistance, insulation properties, and high mechanical strength. With advanced processing technology tailored to the properties of polyimide resin, we meet all of our customers' needs. [Key physical properties at 296K] Tensile strength: 58.5 MPa Tensile elongation at break: 4.0% Flexural strength: 75.8 MPa *You can view the available equipment by downloading the PDF. Please feel free to contact us for any other inquiries.
