We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for resin.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

resin(pa) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.

resin Product List

91～120 item / All 190 items

Displayed results
Low-density epoxy resin TE-6311K8

Low-density epoxy resin TE-6311K8

This is a very lightweight epoxy resin with a specific gravity of 0.78. Please use it for reducing the weight of parts, etc. It is so light that, as shown in the photo on the left, it floats on water.

TE-6311K8 2-component low specific gravity epoxy resin Features: Room temperature curing, low specific gravity Applications: Lightweighting of components, etc. 【Specifications (excerpt)】 ■Mixing viscosity: 25℃ 2,170 (mPa·s) ■Glass transition temperature: 34℃ ■Cured material specific gravity: 0.78 (water displacement method) ■Mixing ratio R/H: 100/36 ■Curing conditions: 25℃ x 24h (if heated, 40℃ x 12h, 60℃ x 3h)

  • Other polymer materials
  • Other electronic parts
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Molding and Processing: Miorex PMX-573(S)

Molding and Processing: Miorex PMX-573(S)

Outstanding cost performance and safety without the use of asbestos.

The Miolex series is a product that combines excellent thermal insulation, mechanical strength, outstanding dimensional stability, exceptional cost performance, safety without the use of asbestos, electrical insulation, and machinability. 【PMX-573(S) (Basic Grade)】 Heat resistance temperature (°C): 250 Compression creep (％): 0.71 Bending strength (MPa): 100–150 Compression strength (MPa): 150–200 Impact strength (J/cm): 1.5 Thermal expansion rate (1/°C): 6.6×10^(-8) Thermal conductivity (W): 0.3 Volume resistivity (Ω-cm): FW,★1=10^12, FW,★2=10^7 Water absorption rate: 2.0–5.0 Specific gravity: 2.0–2.2 At our company, we perform precision machining of PMX-573(S) using numerous machine tools in a temperature-controlled environment managed 24 hours a day. *For more details, please refer to the PDF document or feel free to contact us.

  • Composite Materials
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Book] Trends in the Development of Next-Generation High-Speed and High-Frequency Transmission Materials (No. 2274)

[Book] Trends in the Development of Next-Generation High-Speed and High-Frequency Transmission Materials (No. 2274)

[Available for preview] - Low dielectric resin, high-frequency circuit boards, semiconductor packaging materials, optoelectronic fusion -

★5G/6G and the proliferation of generative AI support high-speed, high-capacity communication devices and materials all in one place! ★Requirements for materials used in 2.xD, 3D implementation, chiplets, and next-generation packaging, along with development examples from various companies. －－－－－－－－－－－－－－－－－－－－－ ■ Key Points of This Book 【Low Dielectric Loss Materials】 - Achieving low dielectric constant and adhesion - Design of PPE resin - Solvent-soluble polyimide resin - Fluorine resin with adhesion properties - Film formation of liquid crystal polymers - Olefin-based low dielectric films - Low dielectric halogen-free flame retardants - Development of glass cloth 【Fine Circuit Formation】 - Improving adhesion of difficult-to-bond materials - Copper sulfate plating process - High-adhesion Cu seed layer - Low-resistance, adhesive Cu layer formation technology 【Semiconductor Package Substrate Materials】 - Reducing thermal expansion of organic core materials - Interlayer insulating films - Solder resist - Photosensitive films - For high-end computers - FO-WLP, FO-PLP - For WOW process 【Co-Packaged Optics】 - Co-Packaged Optics - Compact and high-density optical packaging - Silicon photonics - Optical transceivers

  • IPROS3391385136135994447_220x220.png
  • others
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[New Development] Two-component Heat-Curing Epoxy Resin TE-6409FR

[New Development] Two-component Heat-Curing Epoxy Resin TE-6409FR

Transparent, difficult to yellow, flame-retardant epoxy resin equivalent to V-0. Low viscosity with excellent workability. Widely usable from transparent sealing to clear panels.

"TE-6409FR" is a two-component transparent epoxy resin suitable for electronic component encapsulation and craft applications where transparency is required. The mixing ratio of the base agent to the hardener is 100:50, and the mixed viscosity is only 500 mPa·s, making it a low-viscosity design that allows for easy filling of details and uniform coating. It demonstrates over 90% transparency (420-600nm transmission) and is suitable for applications where appearance quality is important. Furthermore, it achieves excellent yellowing resistance, showing no discoloration even after a heat resistance test at 120°C for 1,000 hours, combining aesthetics with reliability. Additionally, it is flame-retardant, contributing to safety assurance. Applications include electronic component encapsulation, transparent panels, clear photo panels, and art crafts, making it versatile across various fields. 【Features】 ■ Two-component transparent epoxy resin (mixing ratio 100:50) ■ High transparency (over 90% transmission at 420-600nm) ■ Excellent workability with low viscosity of 500 mPa·s *For more details, the product specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please reach out if needed.

  • ?TE-6409FR 画像2.png
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood Plastic Composite (WPC)

Wood Plastic Composite (WPC)

Unused wood resources can be effectively utilized!

"Wood Plastic Composite" is a composite material made from wood powder and plastic. 【Advantages】 - It allows for the effective use of unused wood resources. - Wood powder is lighter compared to glass fibers and talc. - It can improve the ratio of plant-derived raw materials. 【Product Lineup】 - Celbride(R): A grade using general-purpose wood powder. - Wood Nanoplast(R): A grade using special wood powder that improves impact resistance. - Flame-retardant Wood Plastic Composite: A grade that has been flame-retardant treated (equivalent to UL94 V-0).

  • Composite Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free high refractive index optical imprinting agent NK OPTIMER NX003

Solvent-free with a viscosity of approximately 3000 mPa·s (25°C), suitable for thick applications. nD1.69, high refractive index. Suitable for WLO, MLA, AR/MR waveguides, and metamaterials.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Biomass Acrylic Polyol '6BX-010'

Biomass Acrylic Polyol '6BX-010'

It is a polyol that can incorporate biomass components into coating agents.

【 POINT 1 !! 】 Acrylic polyol with approximately 48% biomass content can be used as a binder resin for various coatings, offering a wide range of applications and the potential for reduced environmental impact. 【 POINT 2 !! 】 It has good compatibility with isocyanate prepolymers, allowing for improved film properties. 【 POINT 3 !! 】 With low viscosity, it has a minimal impact on the viscosity of coating materials, enabling improvements in high solid content and reducing solvents.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High transparency rubber-modified epoxy resin

High transparency rubber-modified epoxy resin

This is an intermediate product that can impart crack resistance to cycloaliphatic epoxy resin.

The high transparency rubber-modified epoxy resin "Reginas Bond RKB-5810" has the following features: [Features] ■ It can impart crack resistance to alicyclic epoxy resin formulations. ■ It does not hinder the transparency and heat resistance of alicyclic epoxy resin formulations. ■ It alleviates the stress generated during heat cycle testing. ■ It allows for thixotropic properties without compromising the curing ability of UV-curable resins. *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wear-resistant resin

Wear-resistant resin

To avoid sudden equipment troubles, parts with wear-resistant properties that are less likely to break are key!

We would like to introduce the "abrasion-resistant resin" that we handle. Friction refers to the rubbing of objects against each other, while wear refers to the damage caused to products due to friction or polishing. Although the sounds of the words friction and wear are similar, their meanings are completely different. To prevent situations such as production stoppages due to emergency maintenance, we propose suitable materials for each application. [List of high abrasion-resistant resins] ■ PAI (Sliding Grade) ■ MC Nylon (Blue) ■ Ultra High Molecular Weight Polyethylene ■ POM *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
BIO Series

BIO Series

Manufacturing of 3D structures like microplates is possible! Higher resolution images can be obtained.

The "BIO Series" is a biophotonic product with refractive indices of 1.33 and 1.34, enabling improved quality of microscopic images. It is designed to minimize cytotoxic effects and fluorescence. We also offer "BIO-133" with a refractive index (589nm) of 1.334 and "BIO-134" with a refractive index of 1.342. 【Specifications (partial)】 ■BIO-133 ・Refractive index (589nm): 1.334 ・Refractive index (950nm): 1.329 ・Curing method: UV ・Adhesive strength (g/cm): na ・Elastic modulus (MPa): 5 *For more details, please refer to the related links or feel free to contact us.

  • Other optical parts
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SABIC ULTEM and EXTEM

SABIC ULTEM and EXTEM

Value in die-cast parts and stock shape materials

Did you know that Highheat ULTEM and EXTEM powders can be used as additives for optimizing the manufacturing processes of thermoplastic polyimide (TPI) stock shape products (rods, sheets) as well as die-cast components such as connectors, seal rings, screws, and bearings? Our powders help optimize viscosity, reduce curing time, and minimize product defects such as bubbles. They are also inherently compatible with TPI. Go to our dianhydrides and imides webpage: https://lnkd.in/gtGGF8X For inquiries and requests for materials, please visit this site: https://sjpn1971.plabase.com/

  • Engineering Plastics
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antibacterial and anti-mold grade "Klinpy PPF"

Antibacterial and anti-mold grade "Klinpy PPF"

High rigidity polypropylene! Suitable for food manufacturing equipment, transport pallets, and more.

"Climpy PPF" is a polypropylene resin material that meets antibacterial testing, mold resistance testing, and the Food Sanitation Act. We conducted antibacterial performance tests (JIS Z2801) on this product and untreated polypropylene (PP), confirming that the growth of bacteria, including Staphylococcus aureus and Escherichia coli, is inhibited. We also offer a standard grade "mep-PPF" that complies with the Food Sanitation Act. [Features] ■ High rigidity ■ Chemical resistance ■ Antibacterial and mold-resistant *For more details, please refer to the PDF materials or feel free to contact us.

  • 01.JPG
  • Composite Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UV-curable resin with a methacrylate group

UV-curable resin with a methacrylate group

It is a di-functional urethane methacrylate with a methacrylate group.

This product is a di-functional urethane methacrylate with a methacrylate base. It is suitable as a base resin for thermosetting adhesives, anaerobic adhesives, and sealing/casting agents. - Due to its milder reactivity compared to acrylate bases, it has low exotherm, anaerobic curing properties, and low curing shrinkage. It is also characterized by high heat resistance and low toxicity due to its high Tg. - It has a structure that combines hydrolysis resistance from the ether backbone and toughness from the aromatic component. - It uses plant-derived raw materials, making it possible to consider environmentally friendly product development. It is supplied in liquid form. Please download the catalog for more details. We also offer free samples, web seminars, and product customization. Feel free to contact us.

  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Maleic acid resin

Maleic acid resin

It has excellent durability and is used in paints, inks, and glossy paper.

We handle "maleic resin" esterified with gum rosin, maleic anhydride, glycerin, and pentaerythritol. It has a light color and excellent retention, and is widely used as a paint, as well as in inks and glossy paper. Additionally, it can be effectively mixed with nitro cotton and applied in the production of nitrocellulose lacquer. We can also customize production upon request, so please feel free to consult us if you have any needs. 【Product Lineup】 ■MR-130 ■MR-130D *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluororesin (PVDF) high-pressure valve "JV-0808MF-PVDF"

Fluororesin (PVDF) high-pressure valve "JV-0808MF-PVDF"

Using VITON for O-rings with fluororesin (PVDF)! A compact, high-performance resin valve with excellent heat resistance and chemical resistance. *Available for orders from 1 piece to large lots!

The resin valve "JV-0808MF-PVDF" is a compact (1/4) resin valve made of fluororesin (polyvinylidene fluoride / PVDF) that excels in heat resistance and chemical resistance. Being made of resin, it is of course rust-free and can be used over a wide range of temperatures. Furthermore, it has excellent chemical resistance, making it a high-pressure resin valve suitable for piping components in specialized fields. 【Features】 ■Material: Fluororesin (polyvinylidene fluoride / PVDF) ■O-Ring: VITON ■Size (nominal diameter): 1/4 ■Pressure: 1.6Mpa (16 Bar) ■Heat resistance: -20℃ to +110℃ ★Additionally, there are many valves made of different materials available. *For more details, please refer to the documentation or contact us directly.

  • valve
  • Plastic utensils and containers
  • Piping Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Engineering resin "high-performance polyamide resin"

Engineering resin "high-performance polyamide resin"

A resin material with excellent toughness, wear resistance, and chemical resistance! Numerous achievements in automotive parts and food packaging films!

Our company handles high-performance polyamide resins such as Grilamid(R), Grivory(R), and Grilon(R). These polyamide resins possess outstanding physical properties in terms of toughness, wear resistance, and chemical resistance, making them superior to other resins and widely used among engineering plastics. 【Product Lineup】 ■Grilamid(R) ■Grivory(R) ■Grilon(R) *For more details, please download the PDF or contact us.

  • Composite Materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin raw material: Polyphenylene sulfide 'PPS/GF40 Black'

Resin raw material: Polyphenylene sulfide 'PPS/GF40 Black'

Excellent long-term electrical properties! Resistant to most acids and alkalis, and there are no solvents that can dissolve it below 200°C.

"PPS/GF40 black" is a polyphenylene sulfide that has flame retardancy equivalent to UL94 V-0 even without the use of flame retardants. It has excellent long-term heat resistance, with a heat deflection temperature of 260°C for 40% glass fiber content, and 112°C even without fillers. It is resistant to most acids and alkalis, and there are no solvents that can dissolve it below 200°C. 【Specifications】 ■ Heat resistance: 260°C ■ Tensile strength: 196 MPa ■ Chemical resistance: Caution with concentrated nitric acid ■ 40% glass fiber *For more details, please refer to the related link page or feel free to contact us.

  • others
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Measurement of Biodegradation Rate of Biodegradable Resins and Biodegradable Plastics (MODA)

Measurement of Biodegradation Rate of Biodegradable Resins and Biodegradable Plastics (MODA)

Our company is a testing institution certified by the Japan BioPlastics Association (JBPA)!

We would like to introduce our service for "Measurement of Biodegradation Rate of Biodegradable Plastics (MODA)." For biodegradable plastics such as PLA (polylactic acid) and PBS (polybutylene succinate), we can measure the biodegradation rate in accordance with standards (JIS K 6953-2, ISO 14855-2). The measurement principle involves calculating the degree of degradation (degradation rate) by measuring the CO2 produced during respiration when microorganisms decompose the plastic. 【Equipment Information】 ■ Testing Equipment: Microbial Oxidative Decomposition Measurement Device (MODA-CS) manufactured by Yahata Bussan Co., Ltd. ■ Analysis Items: Degree of Degradation, Degradation Rate ■ Testing Standards: JIS K 6953-2, ISO 14855-2, ISO 17556 *For more details, please refer to the related links or feel free to contact us.

  • Contract measurement
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UV-curable epoxy resin "TERADITE TRU-0260K3"

UV-curable epoxy resin "TERADITE TRU-0260K3"

Curing conditions are UV (metal halide lamp) 6,000 mJ/cm²! High heat resistance, high humidity resistance resin.

"TERADITE TRU-0260K3" is a one-component UV-curable epoxy resin. It is a high heat-resistant and high humidity-resistant resin, designed to prevent dripping. Additionally, it is a high-density resin with a specific gravity of 5.0. It can be used as a resin for balancers in small motors (thickness of 2mm or less). 【Liquid Properties】 ■ Component: Acrylate resin ■ Appearance (visual): Gray liquid ■ Specific gravity (25°C): 5.0 ■ Viscosity (25°C, 10rpm): 45,000 mPa·s ■ Thixotropic index (1rpm/10rpm): 1.2 *For more details, please download the PDF or feel free to contact us.

  • Other consumables
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thermoplastic polyimide resin Therplim powder filler application for toughness modifier in CFRP.

Thermoplastic polyimide resin Therplim powder filler application for toughness modifier in CFRP.

Improved toughness, enhanced sliding properties, and low dielectric effects from various powder additives! Introduction to powder filler applications.

Introducing the powder filler application of Therplim (filler). The effects of adding powder include improved heat resistance, enhanced mechanical properties, and improved sliding properties. For example, it provides toughness and reduces weight for high heat-resistant CFRP. 【Effects of Adding Powder】 ■ Improved heat resistance ■ Increased toughness ■ Enhanced mechanical properties ■ Improved sliding properties ■ Increased chemical resistance ■ Low dielectric * For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to 【High Heat Resistance】 PI Resin SCM8000

Introduction to 【High Heat Resistance】 PI Resin SCM8000

It is an engineering plastic that boasts excellent heat resistance, low water absorption rate, and outstanding sliding properties.

SCM8000 is a super heat-resistant resin made from high heat-resistant polyimide that has been compression molded. It exhibits excellent performance in high-temperature environments, corrosive conditions, and areas with concerns about wear due to repeated sliding. Among engineering plastics, it is a material with good processability. It allows for burr-free machining with cutting tools during drilling and is suitable for fine hole drilling. Our company has extensive experience in precision machining, so please feel free to consult with us. 【Features】 ■ Load deflection temperature: 480℃ ■ Low water absorption (23℃, 24h): 0.06wt% ■ Flexural strength: 190MPa ■ Replacement of high vacuum and high heat-resistant parts (ceramics ⇒ SCM8000, etc.) For more details, please refer to the materials. We would be happy to assist you.

  • SCM8000　サブ画像　写真.png
  • SCM8000　サブ画像?　写真.png
  • CVD Equipment
  • valve
  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Recycled copolyester resin "PEPROLENE(TM)"

Recycled copolyester resin "PEPROLENE(TM)"

Plastic with transparency and impact resistance.

"PEPROLENE(TM)" is produced using our unique manufacturing method, maintaining transparency comparable to PC and PMMA while offering stronger surface scratch resistance, high impact resistance, heat resistance, and chemical resistance than PC. It is an environmentally friendly plastic that is BPA-free (contains no bisphenol). It has transparency and gloss similar to acrylic. Please feel free to contact us if you have any requests. 【Features】 - An excellent polymer with impact resistance comparable to polycarbonate and scratch resistance comparable to acrylic. - Chemical resistance including resistance to alkali, oil, and ammonia. - Higher heat resistance compared to PETG and PS, among others. *For more details, please download the PDF or feel free to contact us.

  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Phenolic resin for FRP 'MWF-2520LV'

Phenolic resin for FRP 'MWF-2520LV'

Low odor / low formaldehyde type phenolic resin for FRP!

We offer a low-odor FRP phenolic resin, 'MWF-2520LV', which contains less than half the amount of formaldehyde compared to conventional products. This product can cure with a lower amount of curing agent compared to conventional products. Additionally, it is designed to reduce the amount of moisture generated during the curing reaction, resulting in high bending strength of FRP molded products. 【Features】 - Can cure with a lower amount of curing agent compared to conventional products - Designed to reduce the amount of moisture generated during the curing reaction - High bending strength of FRP molded products - Low viscosity and suppresses reaction moisture by 10% - Low odor due to formaldehyde content being half that of conventional products *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
100% natural biomass-based (0 petroleum) cellulose-based resin

100% natural biomass-based (0 petroleum) cellulose-based resin

Oil usage 0! Introducing environmentally friendly biodegradable resin materials.

We have developed biodegradable cellulose-based resins while minimizing complex chemical reactions. Taking additives into consideration, the composition is made from 100% natural biomass, with zero petroleum usage. Additionally, it possesses thermoplastic properties, making it an environmentally friendly biodegradable resin material. Furthermore, we already have technology to combine plant-derived cellulose nanofibers with resins, and by applying this technology to this material, we have created a composite material of biodegradable cellulose-based resin and cellulose nanofibers. Please feel free to consult us at any time for technical details. 【Features】 ■ Tensile strength: 42-54 MPa ■ Composition of 100% natural biomass ■ Zero petroleum usage ■ Possesses thermoplastic properties *For more details, please refer to the PDF document or feel free to contact us. *If you would like a paid sample, please inquire.

  • Other polymer materials
  • plastic
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PEEK resin processing【TECAPEEK GF30 natural】

PEEK resin processing【TECAPEEK GF30 natural】

We offer precision machining of Ensinger's PEEK resin TECAPEEK GF30 natural, from small lots of 1 piece to mass production!

"TECAPEEK GF30 natural" is a PEEK material containing 30% glass fiber. It has excellent chemical resistance, does not dissolve in common solvents, and has superior resistance to large amounts of gamma radiation. Like all PEEK grades, it also possesses high thermal stability, minimal thermal expansion, and very low moisture absorption. It is suitable for use in parts subjected to significant static loads over long periods under high-temperature conditions. 【Features】 ■ Improved toughness ■ Flame retardancy ■ Very high creep resistance ■ Good chemical resistance ■ Hydrolysis resistance and steam resistance ■ Very high rigidity *For more details, please download the PDF or feel free to contact us.

  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KYNAR FLEX (PVDF-HFP)

KYNAR FLEX (PVDF-HFP)

Fluororesin with excellent flexibility and solubility.

Kynar Flex® copolymer possesses flexibility, high elongation, and the ability to be dissolved in various organic solvents, while maintaining weather resistance and processability similar to PVDF homopolymer. By varying the proportion of hexafluoropropylene, we offer a wide range of grades with different properties. All products are available in powder, pellet, and some aqueous emulsion forms. Features: - Excellent resistance to direct sunlight and UV exposure - Chemical resistance to a wide variety of substances - Radiation resistance - Flame retardancy/smoke resistance - Ease of processing in post-processing such as welding and assembly - High purity for extremely demanding applications - Very high electrochemical stability - Soluble in polar organic solvents - Flexibility

  • Engineering Plastics
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NAGASE 3DP Open Lab

NAGASE 3DP Open Lab

Tune and customize light-curing resin! We propose light shaping devices and post-processing methods.

At Nagase Chemtex's open lab, we conduct joint experiments with customers on photopolymer 3D printing. We tune and customize photopolymer resins, and propose suitable photopolymerization devices, post-processing methods, and optimal structural shapes. We possess a wide variety of photopolymerization devices, ranging from small to large sizes, and we also have analytical equipment to measure various mechanical strengths and thermal properties. 【Features】 ■ High heat resistance ■ Structure (lattice structure, weight reduction) ■ Post-processing (cleaning, post-curing) ■ High-speed lightweight ■ Photopolymerization (prototyping, condition examination) ■ Resin (tuning, customization) *For more details, please refer to the PDF materials or feel free to contact us.

  • 3D Printer
  • Resin processing machine
  • Prototype Services
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KYNAR (Polyvinylidene fluoride, PVDF)

KYNAR (Polyvinylidene fluoride, PVDF)

Fluororesin with over 50 years of proven durability and excellent processability.

Kynar® PVDF polymer is a fluoropolymer that is very easy to process and requires little specialized processing equipment. It has a wide processing temperature range (the difference between melting temperature and degradation temperature). Kynar® PVDF polymer is approved by end users around the world due to its excellent characteristics. The product is available in powder or pellet form. Features: - Excellent resistance to direct sunlight and UV exposure - Chemical resistance to a wide variety of chemicals - Radiation resistance - Flame retardant/smoke resistant - Ease of processing in post-processing such as welding and assembly - High purity for extremely demanding applications - Very high electrochemical stability - Excellent wear resistance - High temperature rating: maximum continuous use temperature 150º C

  • Engineering Plastics
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Recycled synthetic resin "Recovered PVA"

Recycled synthetic resin "Recovered PVA"

Currently using PVA, we are looking for affordable and SDGs-conscious products! Monthly orders can also be supplied.

Our company collects and dries wastewater from factories in Japan to produce PVA, which we sell as a raw material for various products. We have a proven track record of using it in adhesives for paper bags, glues for air fresheners, and sponge materials. This product is less expensive than virgin materials and contributes to waste reduction and resource utilization through recycling. Additionally, we also offer "CCC (Clean Cellulose Composite)" as an environmentally friendly product. For more details, please refer to the PDF materials. 【Features】 ■ Due to repeated drying and dissolution, it has lower solvent content and higher purity than virgin materials. ■ Monthly supply in ton orders is possible. ■ Less expensive than virgin materials. ■ SDGs-compliant product. *For more details, please refer to the PDF materials or feel free to contact us.

  • 2022-10-21_16h34_53.png
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin-based molded material Polybutylene Terephthalate 'PBT/GF30'

Resin-based molded material Polybutylene Terephthalate 'PBT/GF30'

Even after prolonged immersion, there is almost no decrease in physical properties! It is suitable for drive components that require lubricity.

"PBT/GF30" is a polybutylene terephthalate that excels in electrical insulation properties and has a high dielectric breakdown voltage, making it suitable for components in electronic precision equipment. It has high chemical resistance except to strong alkalis, and even after prolonged immersion, there is almost no degradation of physical properties, making it suitable for drive components that require sliding properties. It also has high friction and wear resistance, and when reinforced with glass fibers, it has low water absorption and thermal expansion coefficient, resulting in excellent dimensional stability at high temperatures. 【Specifications】 ■ Heat resistance: 210℃ ■ Tensile strength: 132 MPa ■ Chemical resistance: Excellent acid resistance, weak alkali resistance ■ Glass fiber content: 30% *For more details, please refer to the related link page or feel free to contact us.

  • others
  • Other polymer materials
  • resin

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to resin

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.