resinのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

resin(pa) - メーカー・企業と製品の一覧

更新日： 集計期間:Dec 03, 2025～Dec 30, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

resinの製品一覧

16～30 件を表示 ／ 全 200 件

表示件数
SABIC Mobility NORYL

SABIC Mobility NORYL

NORYL's hybrid structural solution

Hybrid components that combine metal and thermoplastic resin contribute to vehicle lightweighting, improved design flexibility, and enhanced component performance. In the reinforcement of pillars and side impact rocker frame protection, the performance of SABIC's NORYL GTX resin has the potential to surpass traditional metal materials in hybrid solutions. NORYL GTX resin offers superior hydrolytic stability compared to polybutylene terephthalate (PBT), better dimensional stability than polyamide (PA6,6) and PBT, and excellent impact resistance at both high and low temperatures.

  • Engineering Plastics

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Flame-retardant resin

Flame-retardant resin

Let's prepare for fires in the factory! Achieve risk reduction.

We would like to introduce our "flame-retardant resin." As exemplified by the series of semiconductor factory fires that occurred in the 2020s, which contributed to the semiconductor shortage, it is absolutely essential to avoid long-term operational shutdowns of factories. Minimizing the risk of fire occurrence in factory operations and, if a fire does occur, preventing its spread and reducing damage is crucial. 【Product Lineup (Partial)】 ■PTFE ■PI (Polyimide) ■PVC (Polyvinyl Chloride) ■PPS (Polyphenylene Sulfide) ■PEEK *For more details, please refer to the PDF document or feel free to contact us.

  • plastic
  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Analysis Case] TDS Analysis of Epoxy Resin

[Analysis Case] TDS Analysis of Epoxy Resin

It is possible to investigate the degassing behavior of organic matter in a vacuum.

Epoxy resin is used as a semiconductor encapsulant, as well as an adhesive and for vacuum leak prevention both inside and outside vacuum devices. However, even after curing, heating may cause outgassing, which can negatively affect products and equipment. TDS (Thermal Desorption Gas Analysis) allows for monitoring outgassing components by heating the sample in high vacuum (1E-7 Pa) or while maintaining a constant temperature. Below, we present a case study investigating the outgassing behavior of epoxy resin using TDS with temperature maintenance.

  • Contract Analysis
  • plastic
  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Light-curing resin "SCR(R)786"

Light-curing resin "SCR(R)786"

High transparency, high heat resistance, and improved toughness photopolymer resin.

"SCR(R)786" is a new photopolymer resin that has improved transparency, toughness, and heat resistance compared to conventional products. The reduction in resin viscosity makes it easier to create trap-shaped models. Additionally, as it is a non-hazardous and non-toxic material, the safety of the resin is enhanced, making it easier to handle. Please feel free to contact us if you have any inquiries. 【Specifications (excerpt)】 ■ Liquid properties - Viscosity/25℃ Pa·s: 0.2 - Safety: Non-hazardous, non-toxic (antimony-free) ■ Properties of molded products - Tensile modulus MPa: 1400 - Elongation at break %: 15 - Bending modulus MPa: 1700, etc. *For more details, please download the PDF or contact us.

  • Plastic utensils and containers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
What are plastic raw materials?

What are plastic raw materials?

Introduction to the "plastic raw materials" primarily handled by Daikyo Chemical.

We would like to introduce the "plastic raw materials" primarily handled by Daikyo Chemical Co., Ltd. Naphtha, which is derived from the distillation and refining of crude oil, the main raw material for plastics, is further decomposed and refined to produce ethylene and propylene, which are then chemically reacted to produce substances such as polyethylene (PE) and polypropylene (PP). The general term for these products (polymers) is plastics. The "plastic raw materials" we handle include general-purpose resins such as low-density polyethylene (LDPE), high-density polyethylene (HDPE), and polypropylene (PP), as well as functional resins such as thermoplastic elastomers (TPE), polyamide (PA, also known as nylon), and ethylene-vinyl alcohol copolymer (EVOH). 【Plastic Raw Materials】 ■ Polyethylene (PE) ■ Polypropylene (PP) ■ Elastomers (TPE, etc.) ■ Fluororesins (ETFE, etc.) *For more details, please refer to the PDF materials or feel free to contact us.

  • Plastic utensils and containers

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plastic raw materials

Plastic raw materials

We handle a variety of products, including general-purpose resins and engineering plastics.

Our company sells plastic raw materials, products, and molding-related items that contribute to energy conservation, as well as biodegradable resins. We are committed to finding solutions to the issues faced by our customers and society, and we will provide value-added proposals with enthusiasm. Please feel free to consult us when needed. 【Business Overview】 ■ Proposal for the installation of environmental products related to plastic raw materials, products, and energy conservation, as well as the sale of biodegradable resins. *For more details, please download the PDF or feel free to contact us.

  • plastic
  • Engineering Plastics
  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Synthetic resin

Synthetic resin

We are facing a significant turning point in terms of the environment, responding to the diversifying needs!

Our company, as a specialized trading firm cultivated over many years, offers synthetic resins and synthetic rubbers used in a wide range of applications from everyday goods to precision machinery. The industries where synthetic resins are utilized include automotive, electrical and electronic, and semiconductors, among others, and their potential is limitless. We focus on the performance and functionality of the final products and will propose suitable raw resin materials and molding conditions. 【Product Categories】 ■ General-purpose resins ■ General-purpose engineering plastics ■ Super engineering plastics ■ Other resins ■ Synthetic rubbers *For more details, please feel free to contact us.

  • Rubber

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Rapid realization of product development through material selection and engineering.

Rapid realization of product development through material selection and engineering.

Support from medical materials and design to prototype verification and mass production, all in one.

Our company is engaged in the manufacturing of medical devices and also handles medical materials primarily made from resin. We offer a wide range of biocompatible resins, including implant-grade, short-term contact grade, and other materials suitable for sterilization. As various conditions such as the class of medical devices, usage environment, and sterilization requirements overlap, the hurdles for availability increase. Consequently, we are seeing a growing number of inquiries for material selection, and we can propose materials tailored to specific applications. Additionally, by being involved from the design and development stage, we support manufacturing methods and costs for the final product, which is one of our strengths. Utilizing the latest technologies such as 3D printers and 3D/CT scanning, we can conduct design, prototyping, and verification, providing services to realize product commercialization more swiftly and reliably.

  • Contract manufacturing
  • 3D Printer
  • Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Contract Molding of LFT Injection Molding

Contract Molding of LFT Injection Molding

Bending elastic modulus, bending strength, and excellent impact strength! High freedom of design with LFT injection molding.

Kiso Kogyo Co., Ltd. offers contract molding for LFT injection molding. "LFT injection molding" is an injection molding method that uses pellets filled with continuous fibers arranged in parallel. Due to the fiber length being several millimeters, it has high impact strength, and because long fibers can fill into details, it is possible to enhance strength through the use of rib reinforcement. Furthermore, it allows for high freedom of design and can be molded with high strength at low cost. 【Features】 ■ Molding while maintaining the fiber length of the pellets ■ High bending modulus and bending strength ■ Maintains high impact strength from low to high temperatures ■ Excellent creep characteristics ■ Minimal warpage, low coefficient of linear expansion, excellent fluidity ■ High dimensional stability and excellent moldability *For more details, please refer to the PDF materials or feel free to contact us.

  • Processing Contract
  • Plastic Mould

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
高摺動性特殊ポリエチレン樹脂『LUBMER』

高摺動性特殊ポリエチレン樹脂『LUBMER』

独自の高性能と確かな品質を誇る素材！用途に応じた幅広い選択肢をご用意！

当社で取り扱っている『LUBMER』についてご紹介いたします。 ルブマーは一般射出成形用に設計された特殊ポリエチレン樹脂です。 ほとんど吸湿しないため、予備乾燥の必要がありません。 基本銘柄や改質銘柄など、幅広い選択肢があります。 ご用命の際はお気軽にご連絡ください。 【特長】 ■一般射出成形用に設計された特殊ポリエチレン樹脂 ■ほとんど吸湿しないため、予備乾燥が不要 ■用途に応じた幅広い選択肢をご用意 ※詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。

  • Other polymer materials

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>>

Long-lasting, high-performance fluororesin (PTFE) packing <<Omni-Seal>>

Fluororesin (PTFE) seals that meet harsh demands from high temperatures to extreme low temperatures, from ultra-high pressure to high vacuum! They contribute to increased productivity due to their long lifespan.

OmniSeal is a high-performance sealing solution from SAINT-GOBAIN PERFORMANCE PLASTICS that combines PTFE and corrosion-resistant metal springs. Originally developed as a seal for rocket fuel systems, OmniSeal is now widely used in medical devices, analytical instruments, and food machinery, as well as in general industrial applications such as oil and pneumatic equipment, pumps, and valves. 【Features】 ■ Resistant to almost all chemicals (acids, alkalis, organic solvents, etc.) ■ Usable from -250°C in extreme low temperatures to 300°C in high temperatures ■ Usable from ultra-high vacuum of 10^-8 Pa to ultra-high pressure of 200 MPa ■ Suitable for both dynamic and static applications, with low friction and long lifespan for dynamic use ■ Small cross-sectional dimensions require less installation space *For more details, please contact us or download the catalog.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Resin and plastic raw material inspection "Pellet and Powder Foreign Matter Inspection Device"

Resin and plastic raw material inspection "Pellet and Powder Foreign Matter Inspection Device"

Ideal for testing resin and plastic raw materials! Our uniquely developed inspection mechanism detects foreign substances and discoloration in pellets and powders! *Detection of 9μm is possible.

The "Pellet and Powder Foreign Matter Inspection Device" is ideal for inspecting resin and plastic raw materials! It incorporates a uniquely developed turntable system with our in-house developed imaging unit, allowing it to distinguish foreign matter without mistakenly identifying bubbles, hollow holes, or irregularities in transparent pellet varieties that are difficult to inspect. 【Key Features】 ● Remarkable detection capability (detection accuracy: standard 16.6μm / high precision 9μm), and it is a compact type that combines an inspection box and control panel! ● Standard equipped with a clean unit, making it compatible with simple clean room environments, suitable for installation in factories. ● Easy operation with a touch panel for setting conditions, followed by automatic inspection with just one button. ● Online automatic inspection is possible by connecting to an automatic sampling line. ● It has a mechanism for recovering foreign matter inside the container through suction by an ejector, which is convenient for analysis and other purposes! For more details, please contact us or refer to the catalog.

  • Visual Inspection Equipment
  • Semiconductor inspection/test equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Research Material] Global Market for PA 6 Resin

[Research Material] Global Market for PA 6 Resin

Global Market for PA 6 Resin: Standard, Reinforced, Automotive Industry, Electronics and Electrical, Packaging Industry, Others

This research report (Global PA 6 Resin Market) investigates and analyzes the current status and outlook for the global PA 6 resin market over the next five years. It includes information on the overview of the global PA 6 resin market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the PA 6 resin market focus on standard and reinforced types, while the segments by application cover the automotive industry, electronics and electrical, packaging industry, and others. The regional segments calculate the market size of PA 6 resin by dividing it into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa. It also includes the market share of major companies in the PA 6 resin sector, product and business overviews, and sales performance.

  • Other services

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Research Material] Global Market for Reinforced PA6 Resin

[Research Material] Global Market for Reinforced PA6 Resin

Global Market for Reinforced PA6 Resin: Glass Fiber Reinforced, Carbon Fiber Reinforced, Mineral Reinforced, Others, Automotive Industry, Electronics and Electrical, Packaging Industry, Others

This research report (Global Reinforced PA 6 Resin Market) investigates and analyzes the current state and outlook for the global reinforced PA6 resin market over the next five years. It includes information on the overview of the global reinforced PA6 resin market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the reinforced PA6 resin market include glass fiber reinforced, carbon fiber reinforced, mineral reinforced, and others, while the segments by application cover the automotive industry, electronics and electrical, packaging industry, and others. The regional segments are categorized into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa, to calculate the market size of reinforced PA6 resin. It also includes the market share of major companies in the reinforced PA6 resin market, product and business overviews, and sales performance.

  • Other services

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Research Material] Global Market for Bio-Nylon Resin

[Research Material] Global Market for Bio-Nylon Resin

World Market for Bio-Nylon Resins: PA 1010, PA 1012, PA10T, PA11, PA66, Others, Automotive Industry, Electronics, ...

This research report (Global Bio Nylon Resin Market) investigates and analyzes the current status and outlook for the global bio nylon resin market over the next five years. It includes information on the overview of the global bio nylon resin market, trends of major companies (sales, selling prices, market share), market size by segment, market size by major regions, and distribution channel analysis. The segments by type in the bio nylon resin market include PA 1010, PA 1012, PA10T, PA11, PA66, and others, while the segments by application cover the automotive industry, electronics and electrical industry, cable industry, and others. The regional segments are categorized into North America, the United States, Europe, Asia-Pacific, Japan, China, India, South Korea, Southeast Asia, South America, the Middle East, and Africa to calculate the market size of bio nylon resins. The report also includes the market share of major companies in the bio nylon resin sector, product and business overviews, and sales performance.

  • Other services

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

resinに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.