We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for gear.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

gear Product List and Ranking from 96 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

gear Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. 協育歯車工業 東日本営業部　東京支店 Tokyo//Machine elements and parts
  2. 清和ジーテック 本社・工場 Shimane//Industrial Machinery
  3. null/null
  4. 4 藤川伝導機 Tokyo//Industrial Machinery
  5. 5 東京テクニカル Tochigi//Testing, Analysis and Measurement
Go to Company Ranking

gear Product ranking

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. [Processing Example] Internal gear machining by one of the largest gear shapers in Japan. 川島製作所
  2. [Processing Examples] Lathe Processing, Gear Cutting, Key Processing, Flange Riveting 菊伊歯車
  3. Direct Gear Milling Service 金子歯車工業
  4. High-precision master gear "Super Fine Pitch Module 0.2" 滝沢歯車
  5. 4 Gear Drawing Download Service (CAD Data) 協育歯車工業 東日本営業部　東京支店

gear Product List

181～210 item / All 290 items

Displayed results
Leave it to us for gears and cogs!

Leave it to us for gears and cogs!

"Do you have any requests such as 'I would like you to make the same item as this, even though there are no drawings' or 'I would like to request the production of discontinued parts'? [Q&A materials are currently available!]”

Do you have any of the following concerns? "Teeth of gears are worn out" "Teeth have chipped" "I don't have a drawing, but I want something made like this" "I need it made urgently" The H&S Haruna Industrial Group can manufacture various machine parts from a single piece. Please feel free to consult us about gear manufacturing, discontinued parts production, part repairs, sheet metal fabrication, thermal spraying, welding, various surface treatments, and more! 【Features】 ■ Can manufacture from a physical sketch even without a drawing ■ Consultation available for prototypes and development ■ Can handle sizes from palm-sized to over φ800 large plates and lengths over 2m ■ Comprehensive support from material procurement to cutting processing, heat treatment, plating (and other surface treatments), finishing cutting, polishing, and buffing If you have any other concerns regarding machine parts, please feel free to contact us! *For more details, please refer to the PDF materials or feel free to inquire.

  • Contract manufacturing
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
If you're having trouble with gears, use spur, helical, or internal gears.

If you're having trouble with gears, use spur, helical, or internal gears.

Gear teeth have worn down," "There is a tooth missing," "I don't have a drawing, but I want you to make something the same as this," "I need it to be made urgently!

Bevel, spline, special groove, worm, Ayane screw Spur, helical, internal The H&S Haruna Industrial Group can manufacture various machine parts from a single item. Please feel free to consult us about gear manufacturing, discontinued parts production, parts repair, welding, various surface treatments, and more! 【Features】 ■ Can be manufactured from sketches of actual items even without drawings ■ Consultation available for prototypes and development ■ Capable of handling sizes from palm-sized to over φ800 large plates and lengths over 2m ■ Comprehensive support from material procurement to cutting processing, heat treatment, plating (and other surface treatments), finishing cutting, polishing, and buffing.

  • Contract manufacturing
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Consultation desk for difficult parts [Monozukuri, Nonstop Concierge]

Consultation desk for difficult parts [Monozukuri, Nonstop Concierge]

We can accommodate seven categories! Gears, discontinued parts, extrusion mold parts, development products, FA line reconstruction, technical alliances, and anything else you want to discuss.

We provide seven categories of services in a non-stop manner. 1. ★ Concierge (Non-stop consultation support) 2. ● Gear 119 3. ● Discontinued parts (Replacement parts) 4. ● Extrusion mold parts 5. ● Prototype development parts 6. ● FA line reconfiguration 7. ★ Technical alliance Do you have any of the following concerns? "The teeth of the gear are worn out" "Teeth have chipped" "I don't have a drawing, but I want something like this made" "I need it made urgently" H&S Haruna Industrial Group can manufacture various machine parts from a single item. Please feel free to consult us about gear manufacturing, discontinued parts production, part repairs, sheet metal fabrication, welding, surface treatment, and more! 【Features】 ■ Can manufacture from sketches of actual items even without drawings ■ Consultation available for prototypes and development ■ Capable of handling sizes from palm-sized to over φ800 large plates and lengths over 2m ■ Comprehensive support from material procurement to cutting, heat treatment, plating (and other surface treatments), finishing cuts, polishing, and buffing If you have any other concerns regarding machine parts, please feel free to contact us! *For more details, please refer to the PDF materials or feel free to inquire.

  • Contract manufacturing
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic gear, internal gear

Plastic gear, internal gear

Development, production technology, manufacturing, and research of small gears are gathered here.

At Chiba Dice, we provide comprehensive support from the production of internal gear molds to prototype machining, prototype molding using simple molds, and subsequent mass production. With our unique technological development capabilities, we assist in solving challenges related to internal gears, including ultra-small, fine, precise, and special shapes.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Completely Custom-Made] Various High-Precision Gears and Special-Shaped Gears

[Completely Custom-Made] Various High-Precision Gears and Special-Shaped Gears

We create high-precision, high-function gears tailored for various applications!

At Nagaoka Gear Manufacturing Co., Ltd., we are committed to creating "modern gears" that value the essence of gears as "power transmitters," while also advancing research and development of special-shaped gears such as non-circular gears. Leveraging our long-cultivated expertise and extensive development experience, we flexibly respond to all gear manufacturing needs, including ultra-high precision gears and "creative gears" with special shapes, through small-batch production of various types. 【Examples of Products】 ■ Spur Gears ■ Straight Bevel Gears ■ Internal Gears ■ Spiral Bevel Gears ■ Worm Gears ■ Non-Circular Gears ■ Racks ■ Electrode Gears for Electric Discharge Machining We also manufacture other types of gears. *For more details, please download the PDF or feel free to contact us.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear Reproduct Service

Gear Reproduct Service

Leave it to us when you're in trouble! Gear reproduction without the need for drawings.

Our company offers a "Reproduct Service" where we create drawings from damaged gears and reproduce them as new. With our in-house integrated system from drawing to manufacturing, we achieve high precision and short delivery times. We promise to minimize the downtime of your production equipment and ensure a quick restart. Additionally, we can accommodate sizes from a minimum diameter of 5mm to a maximum of 3400mm, including metals and plastics. 【Delivery Records】 ■ Spiral bevel gears ■ Bevel gears ■ Gears & pinions *For more details, please download the PDF or feel free to contact us.

  • gear
  • Contract manufacturing
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear inspection device (tooth groove inspection device)

Gear inspection device (tooth groove inspection device)

An inexpensive groove inspection device used on-site as a replacement for three-dimensional measurement.

- Measurement time: Approximately 1 sec/tooth - Dedicated live nail (air chuck): Compatible with 5 types. Please consult separately depending on the product shape. - Detection accuracy: 10μm (repeatability) - Computer adoption: Save inspection results to any specified location on the hard disk - Equipped with a touch panel: Enhanced user interface for improved operability

  • Other measurement, recording and measuring instruments
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear inspection device (tooth groove inspection method)

Gear inspection device (tooth groove inspection method)

For groove inspection! A groove inspection device with an enhanced user interface for improved operability.

The tooth groove inspection device adopts a contact-type inspection method, achieving stable inspection accuracy even when liquids such as cutting oil adhere to it. Data management can also save files to any designated location on the hard disk, and it is possible to output to Excel files or printers. For more details, please contact us or refer to the catalog.

  • Other semiconductor manufacturing equipment
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Carbonitrided helical rack" as an alternative to ball screws without stroke limitation.

"Carbonitrided helical rack" as an alternative to ball screws without stroke limitation.

[Usage Example/Q&A Presentation] High precision and high-speed transport with a cumulative pitch error of 10μm or less! Suitable for drive shafts of machine tools and running axes of robotic transport systems, etc.! *Video available

Our company manufactures and sells "case-hardened gear helical racks" that keep cumulative pitch error below 10μm, enabling high-precision positioning. With high rigidity and low vibration, they can transmit rotation smoothly and at high speeds, making them suitable for drive shafts of machine tools and travel axes of robotic transporters. They can be extended without limit on stroke, and in applications requiring long strokes, using them as a substitute for ball screws can lead to cost reductions. 【Features】 ■ Adopts a global standard twist angle of 19°/31'/42" ■ Entire length can be aligned to an integer ■ Resistant to wear and impact, contributing to the longevity of machinery ■ Can be manufactured to requested lengths and available for purchase from a single unit *For more details, please refer to the materials. Feel free to contact us with any inquiries.

  • gear
  • rack
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Are you having trouble with rack gears? [Examples of use/Q&A materials available]

Are you having trouble with rack gears? [Examples of use/Q&A materials available]

Do you have any concerns like 'Can you provide a quote or produce even just one item?' or 'Can I request the production of a prototype?'

We respond to diverse needs that meet various sizes and processing conditions with our technical expertise and responsiveness, starting with carburized helical racks. We can address various concerns and questions, such as, "Can you manufacture the same item if I send you a broken gear?" or "Is it possible to get a quote and produce gears in small quantities (starting from one piece)?" and "What types of heat treatment can you perform?" 【Features of KOGA Racks】 ■ Compatible with modules from M0.5 to over M30 ■ Processing support for both helical and straight types ■ Achieves shapes and sizes not available in the catalog lineup, with lengths customizable as needed ■ Supports all common heat treatments, including tempering, carburizing, high-frequency hardening, laser hardening, nitriding, and non-oxidizing hardening ■ Flexible support for all lot sizes, from prototypes to mass production, ranging from one to about 1,000 pieces For shapes not listed in the standard catalog or for custom orders of special items, please leave it to us! Additionally, feel free to contact us for any information not introduced here. *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Production Examples] Quiet Gears / Strong Gears

[Production Examples] Quiet Gears / Strong Gears

A must-see for the automotive industry! We will introduce a case study that realized low-noise gears.

Our company manufactures "quiet gears and strong gears." By changing the machine structure, we have improved rigidity and control capabilities, and by using newly developed grinding wheels, we can produce high-precision gears at approximately twice the speed of conventional machines (RZ362A). [Production Examples] ■ Quiet Gears - Suppressed grinding marks generated by conventional grinding methods to achieve low-noise gears (LNS: Low Noise Shifting) - Eliminated ghost noise generated at the fourth order ■ Strong Gears - Significantly improved surface pressure strength compared to conventional grinding methods through a special grinding method (Cool Cutting) *For more details, please refer to the PDF materials or feel free to contact us.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Production Example] Prototype Hypoid Gears with Short Lead Time and Low Cost

[Production Example] Prototype Hypoid Gears with Short Lead Time and Low Cost

A must-see for the automotive industry! We are applying a data link system to the final gear grinding process.

Our company manufactures "prototype hypoid gears" with short lead times and low costs. For the production of small quantities of bevel gears, grinding can be performed from solid materials without cutting processes. This method allows for economical and quick processing for prototypes or small production runs without the need for expensive cutting tools that require long lead times. By applying a data link system in the final grinding process, it is possible to produce gears according to the design specifications. Performance that withstands noise and load can be directly fed back to the designers. 【Production Examples】 ■ Grinding can be performed from solid materials without cutting processes ■ Economical and quick processing can be done without preparing cutting tools ■ A data link system is applied in the final grinding process ■ It is possible to produce gears according to the design specifications ■ Performance that withstands noise and load can be directly fed back to the designers *For more details, please refer to the PDF document or feel free to contact us.

  • Other Auto Parts
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For those struggling with overseas procurement (gear products)

For those struggling with overseas procurement (gear products)

We can accommodate all processing for gear products from 1 to 500 pieces. For single-process gear surface grinding, we can handle up to 1,000 pieces. High quality gear.

Development of precision gears (including spur gears, helical gears, spiral bevel gears, hypoid bevel gears, small pitch bevel gears, high ratio hypoid gears, straight bevel gears, and curved coupling gears), as well as prototype gears and mass-produced gears, can be handled by our gear-specialized company, Oujik. Overseas procurement of high-quality gears. We can handle all machining from 1 to 500 gear products. Up to 1000 tooth surface grinding gears can be processed in a single operation. For the development of precision gears, prototype gears, mass-produced gears, etc., please contact our company specializing in gears.

  • Drive system parts
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
OGIC [4th] Gear Seminar: Strength of Gears

OGIC [4th] Gear Seminar: Strength of Gears

The gear seminar is currently being held! No registration or application is required, so you can watch it anytime.

⚙⚙OGIC Gear Seminar⚙⚙ For those who want to learn more about gears We are pleased to announce that our gear seminar, aimed at helping everyone learn more about gears, has reached its fourth session! ☆ Content ☆ [Session 4] Gear Strength ~ Gear Damage and Strength Design ~ * Duration: Approximately 15 minutes https://youtu.be/uqbN26AEbXc ━ Streaming since December 2020 ━ We hope that everyone involved with gears can deepen their knowledge on topics they consider important and appreciate the benefits of gears. You can watch the first session from the basic information below. Please proceed directly to the YouTube site.

  • gear
  • Technical Seminar
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Why does gear noise occur?

Why does gear noise occur?

Introducing the typical causes and countermeasures for gear noise!

Many people may be troubled by the noise of gears (gears). The noise from gears is caused by various factors. Depending on the cause, it may be easily resolved, or it may be difficult to identify the cause. When you notice noise from gears, it is important to check all parts that could be considered as potential causes. Typical causes of gear noise include: - Dents and scratches - Surface roughness of the teeth - Backlash - Engagement ratio, etc. If the cause of the gear noise is unknown, we recommend checking the gears following the steps below: 1. Visually inspect the relevant gear parts (check for scratches, dents, etc.) 2. Confirm the installation condition (check if they are aligned properly, etc.) 3. Check from the gearbox. If you still cannot identify the cause of the noise after checking, please feel free to consult us. Our company specializes in producing gears with high quietness, so we can significantly reduce noise. ↓↓ For more details, click here ↓↓

  • gear
  • Other machine elements
  • Processing Contract
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Custom Gear Production Case Study [Zero Roll Gear Prototype]

Custom Gear Production Case Study [Zero Roll Gear Prototype]

We propose a design that improves tooth surface accuracy and enhances surface pressure strength, along with zero-roll bevel gear grinding processing!

When we received a manufacturing consultation from the customer, the issue at hand was that while we were currently addressing it with straight bevel gears, there was a lack of tooth surface strength in the product. To solve this problem, our company proposed improving gear precision and increasing the design flexibility of the tooth surfaces through gear grinding. We implemented a design that could enhance tooth surface precision and improve surface pressure strength using analysis software, and we proposed a zero-roll bevel gear grinding solution. As a result, we were able to increase strength compared to conventional products, confirming that it could withstand greater transmission power and larger loads while maintaining the same size, allowing us to proceed to practical application.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KG standard gear RKG gear grinding rack

KG standard gear RKG gear grinding rack

This is a precision gear grinding rack that perfectly matches places requiring precise movements.

This is a precision tooth grinding rack that is a perfect match for areas requiring positioning accuracy and quietness, such as semiconductor manufacturing equipment, mechatronics, precision instruments, machine tools, and measuring instruments.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Okatsune Gear Manufacturing Co., Ltd. GEAR

Okatsune Gear Manufacturing Co., Ltd. GEAR

For inquiries or consultations regarding gears, please contact the trusted and reliable Okazune Gear Manufacturing Company.

Regarding prototype parts for developed products, parts for small-scale production products, machine repairs, and repair parts, as well as gear pumps, reduction gears, and other gear-related matters. We can accommodate one piece from mass-produced items and custom orders. Please feel free to consult with us. For more details, please contact us or refer to our catalog.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear grinding

Gear grinding

We can accommodate both creation grinding and shaping grinding, so we can respond widely from prototyping to mass production!

Machida Gear Manufacturing Co., Ltd. specializes in "gear grinding," capable of handling both prototype and mass production for generation grinding and form grinding. By performing simultaneous grinding of shafts and end faces as a preliminary process, we can achieve machining that meets the new JIS Level 1 gear grade. Additionally, based on simulations using new gear calculation software, we realize the ideal gear shape. With a wealth of tooth profile correction functions and bias correction functions, we can accommodate various tooth surface shapes and respond broadly to our customers' needs. [Features] - Capable of both generation grinding and form grinding - Supports everything from prototypes to mass production - Machining that meets the new JIS Level 1 gear grade - Broadly responsive to our customers' needs *For more details, please refer to the PDF document or feel free to contact us.

  • gear
  • Contract manufacturing
  • Processing Contract
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machida Gear Manufacturing Co., Ltd. <Our Strengths>

Machida Gear Manufacturing Co., Ltd. <Our Strengths>

One-stop service from consultation and prototyping to mass production and assembly! Our integrated manufacturing capability reduces various costs and risks!

Since our establishment in 1945, we have been manufacturing gears, which are essential in various fields such as aircraft, industrial robots, construction machinery, power equipment, machine tools, forklifts, medical devices, and printing machinery. Our significant strength lies in our integrated production process, from consultation and prototyping of unique products to the completion of finished goods. With our consistent support from prototype development to mass production, we respond to our customers' final product development with speed and cost advantages. 【Features】 ■ Shortened lead times through integrated production ■ Cost reduction in logistics, production, management, etc. ■ Reduced risk of information leakage and thorough compliance with traceability ■ When defects occur, we can identify the root cause by checking each process, preventing recurrence *For more details, please refer to the PDF document or feel free to contact us.

  • gear
  • Gear cutting machine/Gear finishing machine
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Hasuba gear: Thin-walled helical gear (Hasuba gear)

Example: Hasuba gear: Thin-walled helical gear (Hasuba gear)

The material is SCM415, with 77 teeth and a thickness of 1.3mm! Here we introduce examples of construction machinery parts processed on a hob machine!

We would like to introduce a product example of the helical gear "Hasu-ba Gear." It has 77 teeth and a thickness of 1.3mm. This is a part for construction machinery, processed using a hob machine. The size is Φ228, with a module of 2.5, and the material is SCM415. 【Case Overview】 ■ Size: Φ228, Module 2.5 ■ Material: SCM415 ■ Application: Construction machinery ■ Features - 77 teeth, thickness of 1.3mm - Processed with a hob machine *For more details, please refer to the PDF document or feel free to contact us.

  • gear
  • Gear cutting machine/Gear finishing machine
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Internal Gear: Internal gear of a planetary gear mechanism.

[Example] Internal Gear: Internal gear of a planetary gear mechanism.

Size is φ190-40, module 3! Grasp the amount of thermal deformation and implement stable dimension management!

Here is a product example of the "internal gear of a planetary gear mechanism," which is often used in speed reducers and can compactly house the entire device due to its shape. It is used in conjunction with the planetary carrier, sun gear, and planetary gears. The size is φ190-40, with a module of 3, and the material is SCM420H. We grasp the thermal deformation amount and conduct stable dimensional management. 【Case Overview】 ■ Size: φ190-40, Module 3 ■ Material: SCM420H ■ Application: Forklift ■ Features - Internal gear of a planetary gear mechanism - Used in conjunction with planetary carrier, sun gear, and planetary gears - Grasping thermal deformation amount and conducting stable dimensional management *For more details, please refer to the PDF document or feel free to contact us.

  • gear
  • Gear cutting machine/Gear finishing machine
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shinko Gear Co., Ltd. Internal Gear

Shinko Gear Co., Ltd. Internal Gear

An internal gear is a gear with teeth formed on the inside of a cylinder or cone.

An internal gear is a gear with teeth formed on the inside of a cylinder or cone. It is commonly used in planetary gear mechanisms. A regular gear is an external gear. The counterpart that meshes with an internal gear is always an external gear. Internal gears do not mesh with each other. Furthermore, the internal gear is always the larger gear, while the meshing external gear is always the smaller gear. The smaller gear is referred to as a pinion. For more details, please contact us.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nakashima Gear Manufacturing Co., Ltd. - Business Introduction

Nakashima Gear Manufacturing Co., Ltd. - Business Introduction

If you provide the drawings, we will accept the order with a short delivery time for all processing with materials supplied after a meeting.

Nakajima Gear Manufacturing Co., Ltd. specializes in the manufacturing and processing of precision gears, as well as general grinding and common machining such as key and milling. We accept a variety of small quantities, and if you provide us with drawings, we will discuss and undertake complete processing with short delivery times. We respond to customer requests for various precision gear manufacturing, various polishing processes, and various machining. For more details, please contact us or refer to our catalog.

  • Processing Contract
  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hiroshima Seiki Co., Ltd. Product Introduction "Gears"

Hiroshima Seiki Co., Ltd. Product Introduction "Gears"

Exploring the unknown technologies of Hiroshima Seiki Co., Ltd., a group of professionals in manufacturing.

Hiroshima Seiki Co., Ltd. is a specialized manufacturer of gears based in Hatsukaichi City, Hiroshima Prefecture. Gears are essential for all types of machinery, but their manufacturing requires precision machining technology at the micron level. As a result, even major manufacturers representing Japan, such as those in machinery, electronics, automotive, and steel industries, often have no choice but to rely on the technical expertise of specialized manufacturers for gear production. Leveraging such unique technology, Hiroshima Seiki engages in transactions with a wide range of manufacturers and provides gears. 【Types of Gears (Examples)】 ○ Spur Gear → A gear with teeth that are parallel to the axis of rotation → The most common type of gear ○ Helical Gear → A gear with teeth that are angled relative to the axis ○ Bevel Gear → A shape resembling two helical gears combined ○ Worm Gear → A conical gear that transmits power between axes that intersect vertically or horizontally ○ Rack → A flat plate or rod with teeth cut into one side For more details, please contact us or download the catalog.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear "spur gear"

Gear "spur gear"

The shape of the pinion that I want to directly connect to the motor shaft and other shafts!

The "spur gear" from Daido Seiki Co., Ltd. is a gear with teeth cut in a straight line parallel to the rotation axis on a cylinder. 【Product Features】 ■ This is an example of a pinion shape that you want to connect directly to a shaft, such as a motor shaft. In this example, space for bearing housing is also provided. *For more details, please feel free to contact us.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gear "Hasuba Gear"

Gear "Hasuba Gear"

Unlike spur gears, the difference in contact area of the gear tooth surfaces reduces noise!

The "Hasuba Gear" from Daido Seiki Co., Ltd. is a cylindrical gear with twisted teeth. Unlike spur gears, it reduces noise due to the difference in contact area on the gear tooth surface. 【Product Features】 ■ An example of a strong twisted Hasuba gear (screw gear) with a twist angle of 60°. Typically, cutting Hasuba gears with a twist angle of 45° or more often faces mechanical constraints. *For more details, please feel free to contact us.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sankou Manufacturing Co., Ltd. Standard Rack Gear

Sankou Manufacturing Co., Ltd. Standard Rack Gear

[In stock] All items are treated with black dye! Equivalent to JIS Grade 8 precision! We will deliver high-precision products in a short lead time.

Sankyo Manufacturing Co., Ltd. End Face Machined Rack Gears The pitch can be aligned easily for connection installation using the rack alignment method, making installation and length processing straightforward for the effective length of the rack. Precision grade equivalent to JIS Grade 8 (formerly JIS Grade 4)! We have standard stock for racks from M1.0 to M6.0 and for pinions from M1.0 to M3.0. Both the rack and pinion equivalent to S45C are available with a precision grade of JIS N8 (formerly JIS Grade 4), and all products undergo black oxide treatment. Additionally, all angular rack gears come with end face machining, and we also offer high-precision hardened and ground racks (four-sided ground finish)! Furthermore, we have a lineup of CP racks & pinions, round racks, and stainless steel racks, so please feel free to contact us if you are interested.

  • gear
  • Other machine elements
  • Power Transmission Equipment
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision master gear "Super Fine Pitch Module 0.2"

High-precision master gear "Super Fine Pitch Module 0.2"

Support for micro pitch! A revolution in high-precision master gears!

The "Super Fine Pitch Module 0.2" is a master gear for measuring tooth surface engagement errors (for small gear comprehensive inspection). It is a confident creation that embodies Takizawa's technical expertise. 【Features】 - Machined from a micro module (M0.2) - Spur and helical - Gear accuracy supports up to M 00 grade - Special processing also available For more details, please contact us or download the catalog.

  • gear
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rack gear (L size = 500mm) / Module = 1

Rack gear (L size = 500mm) / Module = 1

We provide a minimum half-day estimate and handle everything from gear processing to hardening.

<Processing> Gear / Gear Cutting <Material> S45C <Module = 1> This is a production example of a square rack gear with a length of 500mm. S45C material is used. This product has not been hardened, but we can accommodate various hardening processes, improving wear resistance and achieving high strength. Rack and pinion systems, which convert rotational power into linear motion, are used in elevators, conveyors, and various industrial machinery. Our company accepts orders for small lots, including single part processing. Other processing achievements are listed in the various "Processed Parts Achievement Catalogs" available for download below. From metal to plastic, we are your go-to for cutting processing of prototype and development parts.

  • Other machine elements
  • gear

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of gear

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.