NDTアドヴァンス Product Lineup

The Contrast Sensitivity Gage is a gauge used to evaluate the contrast sensitivity of radiographic imaging systems based on ASTM E1647. It is used in radiographic testing with X-rays and gamma rays to determine the degree of density or thickness differences that can be identified on the image. The gauge features precision indentations for verifying contrast sensitivities of 1%, 2%, 3%, and 4%. When used in combination with spatial resolution evaluation IQIs such as the Duplex Wire IQI, it allows for separate verification of the spatial resolution and contrast sensitivity of the imaging system.

• Radiation detector

The nanoXspot gauge is a device used to evaluate focal spots such as micro-focus and nano-focus X-ray tubes. By analyzing the acquired images with dedicated software, the distribution and shape of the focal spots can be confirmed. It is used for quality assurance and management of X-ray tubes.

• Radiation detector

The "UV-365MAX Series" is a blacklight for non-destructive testing that meets the requirements of non-destructive testing standards such as JIS Z2323, ASTM E3022, AITM6-1001, and RRES 90061. It is a higher model that increases the number of UV-LEDs from three to four in the UV-365 series, emitting ultraviolet light at 4,500 μW/cm² from a distance of 38 cm. Additionally, it can illuminate an area with a diameter of 24 cm at an intensity of over 1,000 μW/cm². The "UV-365MAX Series" includes three models: the standard model "UV-365MAXHC," which is powered by AC, the battery-operated "UV-365MAXZHC," and the "UV-365MAXMHC," which supports both AC power and an external battery.

• Other inspection equipment and devices

The ET-28 is a crack depth gauge designed to measure the depth of cracks that occur in metals such as iron, stainless steel, and aluminum. It is capable of measuring the depth of cracks not only in iron and stainless steel but also in aluminum. The measurement range is from 0 to 100 mm, and it supports multi-point calibration with a maximum of 8 points, making it suitable for a wide range of measurements from shallow to deep cracks. Additionally, for iron and stainless steel, it offers a resolution of 0.01 mm in the range of less than 10 mm. While methods such as eddy current testing, magnetic particle testing, and penetrant testing can detect the presence and location of cracks, evaluating the depth of those cracks can be challenging. By using a crack depth gauge in conjunction with these methods, the depth of detected cracks can be confirmed on-site, aiding in the decision of whether repairs are necessary and what repair methods to consider. It is suitable for measuring the depth of cracks that occur in shafts, rolls, rods, molds, equipment, and machine parts. The measurement process is very simple; by just making contact with the probe across the crack, the crack depth can be immediately confirmed.

• Other inspection equipment and devices

The Semiconductor Wire IQI (Image Quality Indicator for semiconductors and electronic components) is an IQI designed to manage image quality and reproducibility in radiographic testing of electronic components and semiconductor devices, based on ASTM E801. It is composed of transparent acrylic resin, shim materials, lead particles, tungsten wire, and lead identification numbers, and is used to approximate the radiation transmission conditions of the electronic components being inspected.

• Semiconductor inspection/test equipment

The Duplex Plate Type IQI - DLP10 is a plate-type IQI designed to determine image unsharpness and basic spatial resolution in radiographic imaging and radioscopy based on ASTM E3388. Similar to the Duplex Wire Type IQI, it is used for evaluating unsharpness and basic spatial resolution, but it is compatible with high-energy radiation sources such as linear accelerators, betatrons, and gamma-ray sources.

• X-ray inspection equipment

The PM4 Gen3 is a precision ultrasonic thickness gauge designed for high-precision measurement of thin plates and processed parts. With ultra-fast sampling at 200MHz, the same as the higher model PM5 Gen3, it achieves high reproducibility and stability, capable of identifying differences as small as 0.001mm. It supports measurements ranging from 0.13mm to 28mm for steel, meeting the precise thickness measurement needs for thin plates, precision parts, and small-diameter piping. The PM4 Gen3 is a simple thickness gauge designed to enable easy high-precision measurements by omitting the A-scan function, detailed measurement parameters, and complex measurement modes found in the higher model PM5 Gen3. While the PM5 Gen3 is equipped with various functions and detailed parameter settings for professionals in non-destructive testing, the PM4 Gen3 focuses on ease of use by minimizing parameter settings. It also features useful functions for on-site inspections, such as minimum/maximum value display, differential thickness and reduction rate display, upper and lower limit alarms, and B-scan. Additionally, it is capable of measuring the thickness of the base material through coatings, allowing for measurements of the base material thickness through coatings up to 1mm thick.

• Other inspection equipment and devices

The PM5 Gen3 is a precision ultrasonic thickness gauge designed for measuring thin plates, multilayer materials, and high-damping materials. With ultra-fast sampling at 200MHz, it achieves high reproducibility, capable of distinguishing differences as small as 0.001mm. It can measure down to 0.1mm as standard for steel, and with optional use, it can measure as thin as 0.05mm, meeting a wide range of thickness measurement needs. The PM5 Gen3 is a third-generation model developed over a period of three years with the goal of being one of the world's best ultrasonic thickness gauges. It is designed to pursue high-precision measurements and is capable of measuring thin plates, multilayer materials, and high-damping materials, which are typically challenging in standard thickness measurements. Additionally, it features a wealth of A-scan adjustment parameters not found in other companies' ultrasonic thickness gauges or flaw detectors, catering to the advanced demands of experts. To address various challenges in thickness measurement, it offers numerous software options such as multilayer measurement, oxide scale measurement, high resolution (0.1μm), and high frequency (up to 75MHz). It also supports a wide range of single-element probes, including delay lines, contact probes, protective films, pen-type probes, and immersion probes, allowing the use of over 20 types of probes from low frequency to high frequency.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

EVi is a high-end eddy current array flaw detector equipped with advanced features. It supports C-scan, which allows for visual understanding of flaws, and displays clear flaw detection images in real-time on a large, high-definition 10.1-inch (1280×800 pixels) screen. Additionally, its powerful processing capability enables an 8-frequency inspection function (4 absolute + 4 comparative) and supports up to 128 channels (64 absolute + 64 comparative) with multi-array probes. This allows for advanced inspections that were difficult with conventional eddy current detectors. Furthermore, its low noise design provides excellent flaw detection performance. Moreover, it supports advanced integration with various systems, meeting a wide range of inspection needs. EVi is a next-generation eddy current array flaw detector equipped with a variety of functions required for eddy current testing.

• Other inspection equipment and devices

EddyView2 is the latest eddy current flaw detector in the EddyView series, which has received high acclaim in the aerospace and automotive industries. It retains the industry-leading flaw detection performance characteristic of the EddyView series while incorporating features such as an array probe, touch panel, smart probe, and dust and water resistance (IP65). It supports array probes with up to 32 coils and displays beautiful C-scan flaw detection images in real-time. With the newly adopted touch panel and redesigned menu system, adjusting detection conditions and confirming and saving detection results can now be done much more quickly than before. It can simultaneously use up to eight alarms, allowing for multiple NG settings based on crack depth, detection of the distance between the probe and the test specimen (too close or too far), and material identification, among various other applications. The IP65 dust and water-resistant sealed housing ensures safe use even in harsh environments with dust. For external interfaces, it offers digital I/O options such as USB and Ethernet, as well as traditional analog outputs, enabling broad compatibility with external devices.

• Other inspection equipment and devices

The "OFK-500A" is a scientific investigation light (ALS) that comes with a set of three frequently used lamps. It is used for forensic analysis of fingerprints, bodily fluids, blood, fibers, bones, and more. It includes three easily interchangeable lamp heads, allowing you to emit three different wavelengths of 365nm, 450nm, and 500nm simply by swapping the lamp heads. The set also includes two types of goggles, which, when used in combination with the light, enable effective scientific investigations. 【Features】 - Set of three frequently used lamps for scientific investigations - Includes two types of goggles *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

VMEC is a USB-type eddy current flaw detector that achieves an unprecedented size, making it ideal for crack inspection and material differentiation of metal parts through manual inspection. Despite its overwhelmingly compact size, it supports a frequency range of 2Hz to 37MHz and a maximum probe drive of 20V, accommodating various probes from surface probes to large through-coils. Additionally, it boasts impressive flaw detection capabilities comparable to higher-end models, with high-speed sampling of up to 7,800 points per second and two alarm settings. It features an easy-to-understand and simple menu system that heavily utilizes icons, allowing for intuitive operation. Furthermore, saving inspection conditions and screens can be done simply by clicking on icons. 【Features】 - A palm-sized eddy current flaw detector weighing only 150g, achieving an overwhelming size. - Excellent basic performance (frequency range of 2Hz to 37MHz, high-speed sampling of 7,800 points per second, probe drive of 1 to 20V). - Supports two alarm settings. - Simple two-layer structure with a home menu and settings menu. - USB-driven handheld eddy current flaw detector. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The VMEC-2HCT is a cost-effective two-channel USB eddy current flaw detector. Its sealed structure eliminates concerns about failures due to dust, and it can output alarms to external devices, making it suitable for inline automatic inspection of cracks and foreign material detection in metal parts in factories. Each channel can independently set gain (sensitivity), phase, and alarm. It supports a frequency range of 2Hz to 14MHz, allows for high-speed measurements of 8,000 points per second, and can set a probe drive voltage of up to 20V. Measurement data and flaw detection screens can be saved simply by clicking an icon. ■ Features - Eddy current flaw detector with alarm output, designed for dust and drip resistance, suitable for inline automatic inspection - Excellent basic performance (frequency range of 2Hz to 14MHz, high-speed measurement of 8,000 points per second, probe drive of 1 to 20V) - Independent alarm settings for each channel - Simple two-layer structure with home menu and settings menu - Ultra-lightweight at 310g, USB-powered, handheld size eddy current flaw detector *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

EVi is the best eddy current array flaw detector equipped with advanced features. It supports C-scan, which allows for visual identification of flaws, and instantly displays detailed inspection images on a large and beautiful 10.1-inch (1280×800 pixels) display. With powerful processing capabilities, it offers an 8-frequency inspection function (4 absolute + 4 comparative) and supports multi-array probes with up to 128 channels (64 absolute + 64 comparative), enabling measurements that were unimaginable with previous eddy current detectors. It also supports advanced integration with systems, meeting all inspection needs. ■ Features - Supports C-scan for visual identification of flaws - Equipped with an 8-frequency inspection function (4 absolute + 4 comparative) - Compatible with array probes (up to 128 channels, 64 absolute + 64 comparative) - Large and beautiful 10.1-inch (1280×800 pixels) display - Improved low noise and defect detection capabilities through a newly designed platform - Rich input and output functions, compatible with system integration *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The conductivity meter "M4900C" is a device that can instantly measure the conductivity of metals. It requires no complex settings or operations, making it easy for anyone to use right away. In addition to measuring conductivity, it can be used for material identification (distinguishing non-ferrous metals and alloys), evaluating alloy materials, assessing heat treatment and hardness, detecting heat damage to aircraft surfaces and structures, and checking the aging of aluminum alloys. ■ Features - Wide measurement range (12-110% I.A.C.S) and high accuracy (0.5% I.A.C.S) - Portable handheld type - Easy-to-understand operation - Temperature compensation function *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

USone is a high-performance ultrasonic bolt axial force gauge that incorporates remarkable performance in a compact 460g body. It achieves ultra-high resolution of 'axial force 0.001KN, elongation 0.01μm, time 0.1 nanoseconds', the same as the higher model MC950, and also supports bolt axial force measurement in the plastic region and dynamic axial force measurement. Considering usability on-site, it supports power supply via PC USB and mobile batteries, eliminating the need for AC power. ■ Features - High-performance ultrasonic bolt axial force gauge with 1 channel - Ultra-lightweight and compact design at 460g, ideal for on-site use - Ultra-high resolution: axial force 0.001KN, elongation 0.00001mm (0.01μm), time 0.1 nanoseconds - Compatible with bolts ranging from 5mm to 1m in length - Supports bolt axial force measurement in the plastic region - Uses the same MC911 software as the MC950, allowing for shared calibration data - Equipped with a wealth of analysis tools for all analyses related to bolt fastening - Real-time graph display of dynamic measurement data - Capable of dynamic measurements of axial force, torque, angle, rotation speed, elongation, temperature, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Defect Inspection Equipment

The MC950 is a next-generation ultrasonic bolt axial force gauge developed with a completely different concept from conventional ultrasonic bolt axial force gauges. In addition to its high resolution of "axial force 0.001KN, elongation 0.01μm, time 0.1 nanoseconds," it is also capable of continuous dynamic axial force measurement over a certain period during the bolt fastening process and durability/vibration tests. It supports high-speed sampling of up to 4,000 points per second, making it suitable for dynamic measurements across various applications, from measurements lasting a few seconds to those exceeding 10 hours. ■ Features - Ultrasonic bolt axial force gauge with up to 8 channels (portable version has 4 channels) - Simultaneous measurement of axial force, torque, and angle for up to 8 bolts - Sampling frequency of up to 4,000Hz - Ultra-high resolution of axial force 0.001KN, elongation 0.00001mm (0.01μm), time 0.1 nanoseconds - Capable of measuring bolt axial force not only in the elastic region but also in the plastic region - Supports axial force measurement for bolts ranging from 5mm to approximately 1m in length - Real-time graphical display of measurement data, with the ability to display up to 4 graphs simultaneously *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "CLR-365 Series" is an innovative black light equipped with cutting-edge technology. It achieves long operation time of 9 hours and top-level IP68 waterproof performance. In battery-operated black lights, as the battery level decreases, the ultraviolet intensity also drops, which can lead to insufficient strength needed for inspection and the risk of missing defects. The CLR-365 series features an "automatic shut-off function" that turns off the light automatically when it can no longer maintain a certain level of ultraviolet intensity, preventing a drop in ultraviolet strength due to battery depletion, allowing for safe inspections. Additionally, it incorporates a new safe and convenient wireless charging function that charges simply by placing it on the charger. There are two types available: the high ultraviolet intensity "CLR-365 HC" and the standard type "CLR-365 SC." ■ Features - Large capacity lithium-ion battery with 9 hours of long operation - UV-resistant lens with minimal degradation - IP68 dustproof and waterproof performance - No need for cable connections, safe and convenient wireless charging - Easy-to-hold grip *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The "CLR-365B Series" is a unique non-destructive testing blacklight that operates on three AA batteries. Despite being a low-cost blacklight, it meets the high-performance and high-quality standards of "ASTM E3022," in addition to "JIS Z 2323," which requires even stricter criteria. It features an "automatic shut-off function" that turns off the light automatically when a certain level of ultraviolet intensity can no longer be maintained. This prevents a drop in ultraviolet intensity due to low battery levels, allowing for safe inspections. The waterproof performance is at a higher level than before, with an IP68 dustproof and waterproof rating, making it safe to use in any environment. There are two types available: the standard type "CLR-365 BA" and the high ultraviolet intensity type "CLR-365 BHA." ■ Features - Operates for 9 hours on three AA alkaline batteries - UV-resistant lens with minimal degradation - IP68 dustproof and waterproof rating - Comfortable grip *Please feel free to contact us if you have any questions.

• LED lighting
• Other inspection equipment and devices

The OLX-365 series is a compact and high-performance black light. Weighing only 130g and with a minimal size, it keeps visible light below 5 Lux and demonstrates high performance in various inspections. The OLX-365 series includes two models: the 'OLX-365B' and the 'OLX-365BFL'. The 'OLX-365B' emits a powerful ultraviolet light of 10,000μW/cm², while the 'OLX-365BFL' emits ultraviolet light suitable for use in the aviation industry at levels below 4,500μW/cm². It can be used for various applications, including non-destructive testing (NDT), leak tests (oil leak checks), and checking flux and contamination on electronic components and circuit boards. ■Features - Ultra-lightweight and minimal size at 130g - Comes with a spare battery - Ideal black light for non-destructive testing, with a central wavelength of 365nm and significantly reduced visible light *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

OPX-365 is a spot-type black light that emits extremely powerful ultraviolet light. It emits ultra-strong ultraviolet light at 18,000μW/cm² from a distance of 38cm. The high-performance lens enables powerful ultraviolet emission while keeping visible light low, making it suitable for various applications such as non-destructive testing (NDT), leak testing (oil leak checks), and checking for flux and contamination in electronic components and circuit boards. ■Features - Emits powerful ultraviolet light at 18,000μW/cm² - Optimal ultraviolet wavelength for non-destructive testing: "365nm (UV-A)" *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

This is the latest LED black light that achieves overwhelming low prices. By completely renewing the design philosophy and boldly standardizing components while reducing the number of parts, we have realized an astonishingly low price of about two-thirds that of conventional devices (UV-365EH) without sacrificing performance. By optimizing the arrangement of two UV-LEDs, we have achieved a wide irradiation range suitable for non-destructive testing, and we have adopted a sealed structure to prevent failures from dust and water droplets. The SPN-VIN365 is a low-cost, high-performance LED black light developed with a completely new design philosophy and cutting-edge technology. 【Features】 - Wide irradiation range (irradiates a diameter of 15 cm with an intensity of over 1,200 μW/cm²) - Fanless design that reduces failures caused by dust and water droplets *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The UV-365 series is an innovative LED blacklight that boasts excellent performance. With IP65 compliant dust and drip protection, it can be safely used in environments with water splashes and dust. The UV-365 series includes two models. The 'UV-365 EH' emits over 7,000μW/cm² from a distance of 38cm, covering a diameter of 18cm with a UV intensity of 1,200μW/cm². On the other hand, the 'UV-365 SBLC' emits UV light limited to below 5,000μW/cm², suitable for the aviation industry, while keeping visible light below 10 lux, allowing for clear observation of scratch patterns. 【Features】 - IP65 compliant dust and drip protection - Equipped with white light (LED) convenient for inspections in dark rooms - UV-365 EH: Powerful UV intensity of 7,000μW/cm² - UV-365 SBLC: UV intensity below 5,000μW/cm² suitable for the aviation industry, compliant with JIS Z 2323, ISO 3059, as well as ASTM E3022, AITM6-1001, and RRES 90061 *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The EDG-13 series is a state-of-the-art stationary blacklight equipped with 13 LEDs. With IP65 compliant dust and drip protection, it can be safely used in any environment. 【Features】 - IP65 compliant dust and drip protection - Powerful ultraviolet light emitted over a wide area with 13 LED lights - UV-resistant lens with minimal degradation from prolonged UV exposure - Compliant with JIS Z 2323:2017 and ISO 3059:2012 - Compliant with ASTM E3022-18 (EDG-13HC, EDG-13 SBLC only) - Compliant with Rolls-Royce RRES 90061 and Airbus AITM6-1001 (EDG-13 SBLC only) *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The "EDG-4W" is a low-cost stationary and hanging LED blacklight. It emits uniform and non-fluctuating ultraviolet light suitable for non-destructive testing, thanks to the optimally positioned four UV-LEDs. The flexible arm, which can be adjusted to various angles, allows for use not only by hanging but also by mounting on a wall. With an IP65 compliant dustproof and drip-proof performance, it can be safely used in environments with water splashes and dust. 【Features】 - IP65 compliant dustproof and drip-proof performance - Emits light with an intensity of over 1,000μW/cm² over a diameter of approximately 30 from a distance of 120cm - Achieves overwhelming low cost for both hanging and stationary blacklights *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The "OPX-450" is a spot-type LED light that emits powerful blue light. It is compact and cordless, allowing for use in various locations. Blue light is safer compared to black light (ultraviolet), so it can be used with peace of mind. In non-destructive testing and leak tests, wearing the included yellow goggles allows for clear visibility of defect patterns. ■Features - Powerful blue light with an intensity of 7,000μW/cm² - Blue light with a central wavelength of 450nm, which is safer than black light (ultraviolet) - Maintains detectable intensity instantly after power input *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Flaw detection testing
• Other inspection equipment and devices

The "OFK-8000A" is a compact and powerful light designed for scientific investigation (ALS) that is ideal for use in the field. It is used for forensic analysis of fingerprints, bodily fluids, blood, hair, fibers, bones, and more. It comes with a set of 8 interchangeable lamp heads that can be easily swapped out, allowing you to emit 8 different wavelengths: 365nm, 410nm, 450nm, 500nm, 525nm, 590nm, 630nm, and daylight color (6,500°K). It also includes 3 types of filter plates and 4 types of goggles, which can be used in combination with the light for effective scientific investigation. 【Features】 - Ability to emit various wavelengths by swapping 8 types of lamp heads - Includes 3 types of filters and 4 types of goggles *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The XRP-3000 is a highly accurate ultraviolet intensity meter and illuminance meter, ideal for use in non-destructive testing (NDT) such as measuring ultraviolet light intensity with a black light and measuring illuminance in dark rooms. It measures ultraviolet intensity and illuminance simultaneously. It also comes with traceability to NIST (National Institute of Standards and Technology), which is essential in the aviation industry. 【Features】 - Simultaneous measurement and display of ultraviolet intensity (UV intensity) and illuminance - Supports luminance measurement (optional) - Equipped with functions such as integration mode, peak measurement, and auto power off *For more details, please refer to the PDF materials or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The XP series is a highly accurate ultraviolet intensity meter and illuminance meter, ideal for use in non-destructive testing (NDT), such as measuring ultraviolet intensity with a black light and measuring illuminance in a dark room. It simultaneously measures ultraviolet intensity and illuminance. It also comes with traceability to NIST (National Institute of Standards and Technology), which is essential in the aviation industry. 【Features】 - Simultaneous measurement and display of ultraviolet intensity (UV intensity) and illuminance - Supports blue light measurement (XP-4000 only) *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• Other inspection equipment and devices

The "FM2000" is a high-brightness film viewer (showcase) that meets D30 and D35 standards, with a maximum brightness of over 150,000 cd/m² and adjustable brightness between 10,000 and 150,000 cd/m². By placing 280 high-performance LEDs inside a luminous area of 220×75mm (9×3"), it achieves overwhelming brightness and a beautifully uniform luminous surface without light unevenness. Additionally, it does not become hot like conventional products, allowing for comfortable inspections even in summer. The use of a quiet fan also keeps unpleasant noise to a minimum. ■ Features - Achieves high brightness of over 150,000 cd/m² with 280 LEDs - Adjustable brightness from 10,000 to 150,000 cd/m² - Foot switch included as standard - Convenient film slot for observation *For more details, please refer to the PDF materials or feel free to contact us.

• LED lighting
• Flaw detection testing
• X-ray inspection equipment

The "DM30 Series" is a high-performance tabletop film densitometer. It achieves a very high repeatability accuracy of ±0.01D, ensuring reliable measurements. Additionally, it comes with dedicated software that allows for calibration of the device, enabling you to perform calibration on-site. The series includes three models: DM3010, DM3010A, and DM3011, each with a measurable density range. ■Features - Wide density measurement range of 0.00 to 5.00D (DM3011) - High repeatability accuracy of ±0.01D - Comes with dedicated software for easy calibration of the main unit (a PC and step tablet are required separately) - Includes a calibration certificate *For more details, please refer to the PDF document or feel free to contact us.

• Flaw detection testing
• Other inspection equipment and devices
• X-ray inspection equipment